slickline overshot made in china

The HQ series overshot assembly is a kind of tool specially used to Lift out and place inner tube assembly. At present, we have four kinds of C-Q series overshot assembly: BQ, NQ and PQ.

Its main components are overshot body, lifting dog. Regarding those to be exported, the HQ series overshot assembly will be packed by export-standard plywood boxes.

As a professional manufacturer of HQ series overshot assembly in China, Wuxi Drlling Tools Factory still provide customers worldwide with China overshot assembly, hoisting plug, foot clamp, circle wrench, etc. All of our products have passed the certification of ISO9001: 2000 and API 5DP. With high quality and competitive price, our products have been well received by customers from Mongolia, Kazakhstan, Russia, Iran, Afghanistan, Oman, Turkey, Thailand, Vietnam, Myanmar, Malaysia, Indonesia, Singapore, Taiwan, Colombia, Mexico, Brazil, Canada, Australia, etc.

Q series Overshot AssemblyThe HQ series overshot assembly is a kind of tool specially used to lift out and place inner tube assembly. At present, we have four kinds of Q series ...

China Overshot AssemblyThe China overshot assembly is mainly used for pulling up inner tubesinside core tubes. And we offer various overshot assemblies for clients all over the world...

I debated on where to go next, but at the end of the day the most widely used fishing tool has to be an overshot. Some will say why not a spear? Well if you must ask, always go with the strongest fishing tool you can run to catch the fish. And if you run a spear, never plug the I.D. of your fish by breaking it off. Done with that!

The info that follows has been taken from the manuals published on overshots. I realize that paper manuals are a thing of the past, yes, yes at one time fishing tool hands carried massive catalog brief cases full of reference material. Now you have the luxury of your laptop loaded with information. If you have never sat down and read an overshot manual, now might be a good time.

The overshot is highly versatile and efficient tool. There are several different types of overshots, however each overshot is designed to engage a specific size of tubing, pipe, coupling, tool joint, drill collar or smooth OD tool.

The original overshot was developed by Bowen Oil Tools, which is now part of NOV. One thing I will point out is that in the catalogs you will see more than one assembly number for a given OD of Overshot, this came about due to the two locations developing their own variations. I found this information on NOV’s website and thought it was interesting to share.

Bowen™ became a leader in innovation with the creation of the first overshot, the Series 150, in 1935. This tool set the standard for fishing equipment, and the quick acceptance of the tool assured the company partners that their business would be successful. The company continued to create new products, building a reputation for their well tool design and construction.

Currently there are several manufacturers of overshots, NOV (Bowen), Rubicon (Logan) and Applied Oil Tools (Gotco). These overshots are designated by a series number as follows:Series 10 - Sucker Rod Overshot

Overshots may be identified by one of the following, known as “type”:Full Strength (FS) - engineered to withstand all pulling, jarring and torsional strain

The basic overshot (from top down) consists of a top sub, a bowl, grapple, control, and a guide. In addition to the basic components, some overshots (Series 10 and 150) can be dressed with either a:Spiral grapple used if the fish diameter is near the maximum catch of the overshot, or a

The Series 150 Overshot features the ability to packoff on the fish. When the circulating packoff is not used, the fluid circulates down the drillpipe, aroundthe top outside of the fish, through the slip or grapple assembly, around the guide shoe and up the annulus.

When the circulating packoff is used, the annular space between the top outside of the fish and the inside of the lower part of the overshot is packed off, diverting the fluid flow down into the fish, making it easier to release and recover the fish. Packoffs usually are not high pressure devices but will often withstand sufficient pressure to establish circulation through the fish. Third party high pressure packoffs are available from various sources.

The extension can be installed between the top sub and the bowl of the Series 10, 70, and 150 overshots. It is used to extend the overshot bowl to:Allow the grapple to catch farther down on a fish that may be necked down at the top by having been pulled in two, or latched by an overshot and released several times, or to

A stop ring must be used where a fish OD reduces immediately below the catch area to allow the grapple to bite on full-size pipe.Example - catching a Hydril upset or EUE collar. If the upset of collar should pass completely through the grapple, the overshot may not be releasable.

The Series 10 Sucker Rod Overshot is designed to engage and recover sucker rods, couplings, and similar items from inside tubing strings.Basket grapples are recommended for fishing for hardened and ground boxes (Sucker Rod Box).

The Series 20 Sucker Rod Overshot is a short catch tool which provides a means for engaging the exposed portion of a fish too short to be engaged with a Series 10 overshot.Uses basket grapples only

The Series 70 Short Catch Overshot is designed to engage the exposed portion of a fish too short to engage with Series 150 overshots.Uses basket grapple only

The Series 150 Releasing and Circulating Overshot is used to engage, packoff, and retrieve twisted-off lost tubing, drillpipecoupling, tool joint, casing or other similar fish.

A right hand wicker grapple converts a normal right release overshot to left hand release. This grapple is used where you expect to apply excessive right hand torque to release a packer, safety joint, etc. Note: Overshot will have to be released by left hand rotation.

High Pressure Packoff Assemblies:The High Pressure Packoff Assembly is an accessory to the Series 150 Overshots. It is used when high pressure circulation to the fish is required. It consists of a packoff sub with packing and packing rings and is installed between the top sub and bowl of the overshot. By running the packoff sub above the bowl, this design prevents the application of high internal pressures to the overshot bowl. The design of the High Pressure Packoff Assembly allows pressures two to three times the standard overshot packoff to be applied to the fish.

This information comes directly from the NOV manual for the Wide Catch Overshot. This is probably the first and only change to this common tool I know of in my career.

The Wide Catch Overshot provides the strongest tool available to externally engage, pack-off, and pull a fish that has been significantly worn. This tool has similar rugged design features and construction as the industry standard, Bowen Series 150 overshot, with the ability to interchange the Bottom Guide with the full range of existing components used with the standard Bowen Series 150 overshot.

In service, the Wide Catch Overshot (WCOS) takes a positive grip over a large area of fish and is capable of withstanding heavy pulling, torsion, and jarring strains without damage to the tools or the fish.

The WCOS has been designed to significantly increase the catch range of the OD of the fish to be caught, compared to the standard overshot. This enables a greater opportunity for a successful fishing operation in a reduced number of trips, thus reducing overall intervention costs for the operator. In addition to the large catch range, the WCOS has the ability to seal across very large extrusion gaps at both standard and high pressure and provide full circulation through the fish, should it be required.

Connections between the Top Sub/Bowl and Extension Sub have been designed to create a seal. This will prevent the connection from washing out should the overshot be required to be flowed through for a long period of time. In order to lock the Top Sub/Extension Sub to the Bowl from backing off during operation, set screws have become standard and will gall the threads should the connection break free.

The operation of all overshots is identical. The exception being that the Series 150 carries a packoff which provides circulation through the fish. First, determine that the overshot is properly assembled and dressed with the proper size grapple. Make up the overshot on the fishing string (normally it is run connected to the bottom of the bumper sub) and run it into the well. As the top of the fish is reached make sure circulation has been established to clear overshot ID of any plugging. Lower the overshot onto the top of the fish with no rotation at first. A 5,000 pound set down weight will be sufficient to engage the grapple. While lowering the overshot over the top of the fish watch for pressure build up, shut off pumps if any pressure build up is noticed. Should any back pressure be noticed, release the back pressure to allow the grapple to engage the fish. By elevating the string it can be determined, if the grapple went over and engaged the fish. If unable to work overshot over top of fish without rotation, then slowly rotate the fishing string to the right and gradually lower the overshot over the fish. Combined rotation and lowering over top of the fish are important to keep the grapple in the release position. This provides the maximum clearance between the grapple and fish. While lowering the overshot over the top of the fish, watch for torque build up and an increase in pump pressure. A pump pressure build up indicates the overshot has gone over the top of the fish thereby reducing the flow area. Stop rotation (continued rotation could dull the wickers of the grapple) enabling the grapple to set. Allow the right hand torque to slack out of the string and then pull on the string by elevating the string to set the grapple.

To release from the fish, bump down, then simultaneously rotate to the right and slowly elevate the fishing string. It is best to have a clean fishing top before running the overshot.

The Hunting Releasable Overshot is designed to engage tools that have damaged or have no fish necks. The Overshot is designed to withstand high impacts associated with fishing operations.

Hunting Releasable Overshots are available in all common industry toolstring sizes and are manufactured with either sucker rod or integral quick connections as per customer requirements

Overshot is one of the necessary equipment for wireline drilling which could be put into the hole. This fishing tool is used to connect with the inner tube assembly and lift it up. Overshot is attached to drill rod and lowered over the pipe or stuck in the borehole. Hardened and self-cutting threads inside overshot firmly grasp the pipe, allowing the fish (such as inner tube and core) to be pulled from the hole.

5.The rotary overshot is a non-releasable tool and should normally be run below a safety joint in order to have positive release mechanism from the fish.

CDG’S overshot is an external catch fishing tool designed to catch the inner tube and core from the hole. Once the inner tube of a wireline core barrel is full of core sample, overshot is released from the top. Wireline overshot assembly slides inside the wireline drill rods and locks the spear head of core barrel. Along with inner tube, it is pulled out with steel wire rope.

China Drilling Geological Equipment Ltd. is a professional manufacturer of drilling tools. Main products cover impregnated synthetic diamond core bits, surface-set diamond bits, PDC core and noncoring bits, rod shoes & casing shoes, reaming shells, drill rods, core barrels, fishing tools (like overshots or wireline overshot assembly), water swivels, hoisting plugs, casing cutter assembly, adapter subs, wrenches, recovery tools and foot clamps. 80% of our products are sold abroad.

The Releasable Overshot is used to salvage tools or objects without conventional salvage necks downhole. It is shocked downwards, and the slips are retracted after the pins are cut. To achieve the function of self-release,

The innovative hq overshot assembly on Alibaba.com have a fitting design that offers comfort when using them. They have a dense sponge pad on the speaker for eardrum protection, and the microphones are flexible to allow for suitable adjustments. The connecting cord has a small control panel that adjusts the microphone and speaker volumes. These high-output hq overshot assembly speakers are ideal for call center offices.

The comfortable hq overshot assembly on Alibaba.com are hands-free, which allows the user to speak and type or write at the same time. The speaker output quality is of high standards. These products offer enhanced safety to the eardrums through noise and echo cancelation. With simple steps to connect, the gadgets are easy to operate. Users have an option of having the corded or wireless versions of these products.

The user need should be the top priority when seeking to purchase the technological hq overshot assembly. The jack pin size should be compatible with the connecting port. Working in comfort depends on what one likes, either the single or double speaker gadgets. Depending on the preference, the buyer can go for stationary or portable products for ease of movement. Durability is essential to reduce the instances of constant repurchasing.

The products are of premium quality. The competitive deals on hq overshot assembly accommodate a wide range of financial budgets. With significant warranties, the buyers can enjoy memorable after-sales experience, as the verifiable suppliers have years of global service delivery. Rely on the convenient products on Alibaba.com catalogs and increase work output.

6. Lower the drillstring and lartch onto the fish. Do not locate or engage the logging tool with more than 20 000 lbs or the weight advised by the Logging Contractor. A pressure increase shall indicate if the fish is caught in the overshot. A cable head tension increase when lowering the drillstring, or a decrease when pulling the drillstring indicates that the fish is connected.

7. Observe the cable tension. If the tension drops, there is a good chance that the fish has been latched on. Repeat this procedure a few times to make sure this is the case. If there is no drop in tension, Go down with the overshot a little deeper than before and repeat the procedure.

A device called the overshot is attached to a wireline cable and lowered or pumped into the hole until it captures the head assembly, allowing the inner tube to be pulled or hoisted back to the drill rig by use of a winch or hoist.

The head assembly of the original Q system incorporated a latch mechanism consisting of a pair of pivoting latches, deployed by a wire “butterfly” spring and retracted by the impact with the bottom of a slot in the latch retracting case when retracted by the wireline overshot.

Wireline drill tools can lift drill core from drill rods without picking up bits. All the tools include principal parts of the drill tools, overshotassembly, drill rods, holding dog, circle wrench...

Lifting-Lower and releasing overshot is a fish tool in the casing which fishes fractured tubing and drill string. If fish drill string is stuck heavily and hard to complete fish work, while need to release fish, may get back the tool by bumping drill string down and lift directly.

Lifting-lower and releasing overshot is composed of top sub, bowl, guide pin, guide sleeve, joint sleeve,plug, roller pin, slip, guide, as shown in the figure. Box thread of top sub is connected with drill stem, pin thread is connected with the bowl, The bottom of bowl is connected with guide, An inner cone in the bowl matches the slip, Box thread of guide sleeve is connected with joint sleeve, track trenches are milled on another outer surface: three long trenches and three short trenches act as guiding and reversing ,When guide pin locates in long trench is in the condition of fish ,When guide pin locates in short trench is in the condition of release, Joint sleeve is two petals formation ,It makes slip and guide sleeve connection and by roller pin act as bearing, The inner surface of slip has fish thread, guide is on the bottom and can make fish introduce into slip successfully.