eckel power tong dies supplier

A two-speed Hydra-Shift® motor coupled with a two-speed gear train provides (4) torque levels and (4) RPM speeds. Easily shift the hydraulic motor in low speed to high speed without stopping the tong or tublar rotation, saving rig time.

Used on corrosion resistant alloys (CRA) and fiberglass tubulars where reduced markings on the tubular is desired. Eckel"s Coated True Grit® Dies utilize Tungsten Carbide grit which provides many more points of contact on the surface of the tubular than our Pyramid Fine Tooth dies.

A patented door locking system (US Patent 6,279,426) for Eckel tongs that allows for latchless locking of the tong door. The tong door swings easily open and closed and locks when torque

is applied to the tong. When safety is important this locking mechanism combined with our safety door interlock provides unparalleled safety while speeding up the turn around time between connections. The Radial Door Lock is patented protected in the following countries: Canada, Germany, Norway, United Kingdom, and the United States.

The WD Tri-Grip® Backup is a high performance no compromise backup that is suitable for make-up and break-out of the most demanding connections. The WD Tri-Grip®Backup features a three head design that encompasses the tubular that applies an evenly distributed gripping force. The WD Tri-Grip®is a high performance backup with no compromises that is available for specific applications that provdies exceptional gripping capabilities with either Eckel True Grit® dies or Pyramid Fine Tooth dies.

The field proven Tri-Grip® Backup features a three head design that encompasses the tubular that applies an evenly distributed gripping force. The Tri-Grip®Backup provides exceptional gripping capabilities with either Eckel True Grit® dies or Pyramid Fine Tooth dies. The hydraulic backup is suspended at an adjustable level below the power tong by means of three hanger legs and allowing the backup to remain stationary while the power tong moves vertically to compensate for thread travel of the connection.

Eckel offers several models of torque control systems that are used to monitor the torque turn values when making up tubular connections (Tubing, Casing, & Drill Pipe). Any flaws in the make-up process will be readily shown in a graph.

Tong dies have come a long way since tongs became commonplace in the oilfields. Eckel has been at the forefront of this developing technology with the development of larger wrap-around type dies for many of its tong models. We offer coarse tooth design and fine tooth design depending on the application.

Rig Dies (Typically 1" and 1-1/4" wide) are available in coarse tooth die are typically used for casing and drill pipe where tool joint O.D. sizes vary from joint to joint. Also, Drill Pipe is also a harder steel and rig dies provide a more aggressive and better grip. Rig dies are available with the following surface areas:

Coated Contour True Grit® Dies: Used on chrome and fiberglass tubulars where reduced die penetration and die marking is greatly desired. For more information refer to the

Established in 1958, Eckel is globally recognized as the leading manufacturer of hydraulic power tongs and hydraulic power units for the world’s oil and gas industries. We offer a full line of hydraulically operated drill pipe tongs, casing tongs, tubing tongs, hydraulic backups, hydraulic power units, and tong positioning equipment. Eckel delivers a comprehensive range of tongs from 2-1/16 through 36 in. for the most demanding onshore and offshore environments. Eckel Tri-Grip® backup is an industry standard for reliable make-up and break-out of tubular connections. Eckel’s cutting-edge designs, quality, and rugged durability have won us a world-wide reputation of a first-class product that insures years of trouble free service.

Eckel high-performance tongs operate in some of the toughest operating environments around the world performing drill pipe, casing and work-over activities on onshore and offshore locations. Eckel is highly involved in drilling, well servicing, and work-over operations.

We offer a full range of high quality casing and tubing, drill pipe tongs for use in all types of oil and gas drilling, well completion and well servicing activities. Our tongs have been engineered for the high operational torques today’s that premium connections require. Eckel tongs continue to advance the technology of tool service and setting industry standards.

Sliding heads with wrap-around dies are considered the best choice for thinner wall tubulars where point loading is a concern. The wrap-around dies are symmetrically spaced at all times insuring an equally distributed load on the tubular. A larger gripping surface allows more teeth to come in contact with the tubular.

Our proprietary TRUE GRIT™ dies have set NEW industry standards in handling Corrosion Resistant Allows (CRA) tubular goods. TRUE GRIT™ dies are used on chrome tubulars where reduced die penetration and die marking is desired. TRUE GRIT ™ dies are long lasting 3 times longer than competing technologies and perform better than any steel tooth die when running (SUPER or HYPER) Chrome. Tubular penetration of the TRUE GRIT™ dies is less than half of API allowable surface defect area.

Our renowned free floating Tri-Grip® hydraulic backup provides unparalleled backup performance and is one of the industry’s closest tong mounting backups that minimize pipe bending. The backup utilizes three biting surfaces to insure a secure grip on the tubular to prevent tubular rotation.

Our remotely operated tongs provides a mean to control the tong for make-up and break-out operations. The tong is based upon the standard tong and backup configuration with the exception of hydraulic cylinders on the unit for remote control of the operations of the tong and backup. The functions include the tong door, backing pin, mechanical gear shift, power tong rotation, motor speed and backup gripping. Totally hydraulic with no electrical or electronic devices.

Eckel’s standard diesel or electric power packages at 65 GPM and 2,500 psi (246 LPM / 172 bar) are widely recognized for dependability and long, trouble-free service. Eckel will customize hydraulic power systems in the shortest possible time to meet “nonstandard” requirements for space, fluid flow, auxiliary power, and portability. Diesel driven units are optionally supplied with automatic shutdown systems to prevent engine run away when explosive gases are present. Additional shut downs include engine oil temperature, oil pressure, and fan belt breakage. All controls are either air, mechanical or electrical.

Eckel Manufacturing is committed to maintaining its position as an industry leader of the manufacturing of precision engineered specialty oil field equipment. It is our policy to provide our products at the highest quality that meets our customer’s requirements and demands.

Manufacturer of oil field and gas well equipment. Tubing, casing, drill pipe and riser hydraulic power tongs are available. Standard or custom diesel and electric driven hydraulic power units are also offered. Tong options include torque control system, door interlock, wrap-around dies, integrated hydraulic backups, case handles, tong straps, motor port relief valve and finger guard protection are provided. Suitable for oil or gas drilling, well completion and servicing applications. Secondary services include assembly, engineering, welding, cutting, heat treating, machining, testing and inspection. Serves oil and gas industries. CE certified. Made in the USA.

Eckel 7 5/8 HDS-30 Tong When application demand a wide range of sizes, this tong handles pipe sizes 2 3/8 inches all the way to 7 5/8. Built around the 7 5/8 Standard, the 7 5/8 HD provides a thicker rotary gear for more added strength, an additional idler gear, a larger pinion gear, and stronger bearings for load bearing capacity and durability. 7 5/8 HDS CHROMEBOSS: the 7 5/8 HD comes standard with pivot style heads; however, upon ordering can be supplied with slide-heads which is designated as 7 5/8 HDS. the 7 5/8 HDS is part of our CHROMEBOSS series of tongs that is suitable for running corrosion-resistant alloy (CRA) tubulars. Two slide heads in the tong provide a consistent radial load on the tubular, reduced tubular deformation, and when combined with our pyramid fine tooth or True-GritTM wrap-around dies provides excellent gripping capabilities on corrosion-resistant alloy (CRA).

Eclel Established in 1958, Eckel is globally recognized as the leading manufacturer of hydraulic power tongs and hydraulic power units for the world"s oil and gas industries. We offer a full line of hydraulically operated drill pipe tongs, casing tongs, tubing tongs, hydraulic backups, hydraulic power units, and tong positioning equipment. Eckel delivers a comprehensive range of tongs from 2-1/16 through 36 in. for the most demanding onshore and offshore environments, offer a full range of high quality casing and tubing, drill pipe tongs for use in all types of oil and gas drilling, well completion and well servicing activities.

Opration Manuals. Careers. Hydraulic Power Tongs. is the industry standard for reliable make-up and break-out of tubular connections that are optionally supplied with Eckel tongs. Utilizing two hydraulic cylinders and a three head arrangement ensures a slip-free operation. The backup is suspended at an adjustable level below the power tong Capacity: ½ in ( mm). Tubing Tongs / Parts Rod Tong and Frame Assembly Cat. # Ref. # OEM # Description Qty. Req. Box Sucker Rod Tong Assembly - Mark IV Rod Tong Less Inner Ring Back up 1 A/R Max Torque 1, ft./lbs. Max. Speed rpm: Hydraulic Requirement: 1, to 2, psi 13 gpm Frame Assembly 2 Outer Ring Wear Ring 1 A/R. 20 Hydra-SHift ® UHT Tong. When applications demand the combination of size and high torque output up to , ft-lb, the Eckel Model 20 Hydra-Shift® UHT handles pipe from 7 inches to 20 inches. By utilizing a two speed mechanical shift transmission in conjunction with the two speed Hydra-Shift® motor, the operator has a more flexible Capacity: in. ( mm).

MANUAL TONG DIES Pyramid, Coarse, Plain, Blue Diamond Tooth Web Wilson, B+V BV, BV, BV, Short Die for BJ Type B Manual Tong, BJ Drill Pipe Power Tong, Eckel Power Casing Tong, Farr Power Tongs, BJ Powermatic tong, Farr Power Tong, Weatherford 5 ½" 7 /8". Emery Eckel and Eckel Manufacturing have been awarded numerous State, National and International Awards and is known World-wide as the innovator of the Hydraulic Power Tong. Emery"s greatest accomplishment in life was the impact he had on the people that worked with him, worked for him, loved him and were inspired by him. Eckel Manufacturing Co., Inc. is a leading world-wide manufacturer of hydraulic power tongs. Founded in when Emery L. Eckel revolutionized hydraulic power tongs by chalking out his hydraulic power tong design on the floor. Since then Eckel now manufacturers 40 models of hydraulic power tongs for the oil gas industry. We of-.

BJ drill pipe power tong Eckel 5½ in. to 30 in. power tongs Farr power tongs CDI 12/box 1¼ slot 1/2 x 11/4 x 5 BJ types SDD, C, F and LF tong BJ power casing tong (4½ to 13⅜) WOOLLEY type super C, SLF and SDD tong CDI 12/box 1¼ slot * 1/2 x 11/4 x 5. We can supply those tong dies for BJ Type B, DB, B Extend/HT50, HT55, HT65 Manual Tong, Web Wilson AAX, H, Woolley Type Super A, B, B+V BV, BV, BV, BV, BJ Type SDD, C, F LF Manual Tong, BJ Power Casing Tong(4 ½ " 3/8"), Woolley Type Super C, Eckel model , Web Wilson, B+V BV, BV, BV, Short Die for BJ Type B Manual. Like all of our newly developed tongs, the 5½ incorporates the Hydra-Shift® technology, allowing the operator to shift from high speed to low speed without having to shift the tong manually. You will see many years of trouble-free operation, not to mention the smoother hydraulic shifting. With two models to choose from, Eckel has the right.