eckel power tong dies pricelist

Tong dies have come a long way since tongs became commonplace in the oilfields. Eckel has been at the forefront of this developing technology with the development of larger wrap-around type dies for many of its tong models. We offer coarse tooth design and fine tooth design depending on the application.

Wrap-Around Dies are considered the best choice for thinner wall tubulars where point loading is a concern. Wrap-Around Dies are symmetrically spaced from each other at all times insuring an equally distributed load on the tubular. Having a larger gripping surface area allows more teeth to come in contact with the tubular. Wrap-Around Dies come in any size to match tubing and casing tubulars and API coupling diameters. Wrap-Around dies are available with the following surface areas:

Coated True Grit® Dies: Used on chrome and fiberglass tubulars where reduced die penetration and die marking is greatly. For more information see the True Grit® Dies section.

Eckel offers contour type dies for tubing sizes on many of our tongs which use pivot heads. In addition to our contour dies, we provide A and S series wrap-around dies for our 13-3/8 and 20 Standard casing tongs, providing a larger gripping area and reducing pipe damage. Rig type dies are used extensively for 4-inches and above. Sliding heads with rig dies is the best choice when running drill pipe connections.

Tong dies have come a long way since tongs became commonplace in the oilfields. Eckel has been at the forefront of this developing technology with the development of larger wrap-around type dies for many of its tong models. We offer coarse tooth design and fine tooth design depending on the application.

Rig Dies (Typically 1" and 1-1/4" wide) are available in coarse tooth die are typically used for casing and drill pipe where tool joint O.D. sizes vary from joint to joint. Also, Drill Pipe is also a harder steel and rig dies provide a more aggressive and better grip. Rig dies are available with the following surface areas:

Coated Contour True Grit® Dies: Used on chrome and fiberglass tubulars where reduced die penetration and die marking is greatly desired. For more information refer to the

When buying a power tong dies, you can also minimize your production costs in the future by standardizing some elements of the mold. This means that if you have multiple molded products, you can ask for standard lift bars, connection sizes and clamp slots across all your molds to make them easy to use.

Our huge network of mold shops on Alibaba.com are ready to help you find the right wholesale power tong dies for your products. Use the information available on the platform to decide on the perfect power pu dies that meet your requirements of quality and price. When starting a molded products manufacturing project, it starts with a dfm or design for manufacturing which is created by the mold making shop after analyzing your product design and is there to tell you how the mold is going to be made. After your approval, the mold will be made according to the mold shape.

If you are looking for distinct categories of power tong dies, Alibaba.com is the best place where you can find loads of them. These sturdy and optimum quality power tong dies are ideal for making a vast array of items ranging from normal household products and appliances to automotive and other commercial products too. These power tong dies are fully customizable and professional OEM products that are the best fit for any type of manufacturing plant. Buy these from the leading suppliers and wholesalers on the site. The plastic injection power tong dies available on the site are of export quality and they are made from sturdy materials such as plastic, metal, ABS, PE, PMMA, PC, POM, PBT, PP, PA66, PPO, PVC, PET, etc that are well known for their robust structures. The best part of using these power tong dies is the precision it offers while sh.

MISSION PRODUCTS DIES AND INSERTS ®MISSION PRODUCTS DIES AND INSERTS

Index IntroductionIntroduction..................................................................................ii Foster™ ......................................................................................18 Consistent quality, proper fit, andManual Tongs............................................................................1-2 Dies and Parts for Foster #58 Tongs improved product life are the benefits of Tong Dies Dies and Parts for other Foster Tongs customized manufacturing techniques Reducing Dies Guiberson® .................................................................................19 employed by National Oilwell Varco.Baash-Ross™ Tools..................................................................3-4 Inserts for Guiberson F-1 / H-1 Bowl and Slip These techniques include the use of C-1 Drill Collar Slips Inserts for Guiberson T-110 Bowl and Slip shaped steel, precision tooling and 3½" TS-100 Tubing Spider Hillman-Kelley™ Tubing and Power Tongs ...............................20 fixtures, CNC equipment, and the 5½" TS-100 Tubing Spider Jaw Die Combinations Hillman-Kelley 500-C Tubing Tongs valuable experience gained in three 4½" Baash-Ross D.U. Rotary Slip Special Jaw Die Combinations F/Hillman-Kelley 500-C decades of die and insert specialization. 5½" Baash-Ross D.U. Rotary Slip Tubing Tongs 7" Baash-Ross D.U. Rotary Slip Standard and Reducing Dies F/Hillman-Kelley Power Baash-Ross UC-3 and UC-4 Casing Slip TongsBJ® Tools .................................................................................5-10 Wraparound Dies F/Hillman-Kelley Power Tongs BJ 50 Ton Spider (3½" and 2d" Slip) Hydra-Rig® Bowls and Slips ......................................................21 BJ 100 Ton Spider (3½" and 2d" Slip) 150 Bowl and Slip CDI or BJ "LYT" Elevator 225 Bowl and Slip CDI or BJ "MYT" Elevator 300 Bowl and Slip BJ "YT" Elevator (3½" Thru 2a" Body) Kelco™/CDI™ Tubing Tongs ......................................................22 BJ "HYT" Elevator (3½" Thru 2d" Body) K-20 Dies BJ "YC" Dual Elevator (2d" Body) K-25 Dies BJ "HYC" Elevator (7s" Body) K-30 Dies Improved performance and lower Service Insert Chart for BJ "YC" Thru 1000 Ton Elevators Parts maintenance costs are the results of Global, cost-effective distribution of product is Reducing Inserts for BJ "YC" Thru 1000 Ton Mission® Slips ............................................................................23 National Oilwell Varco’s improved design accomplished through an extensive network Curved Faced Dies F/Powermatic and Hydratorc Tongs Mission Deepwell Bowl and Slip dies and inserts. We engineer and of company-owned facilities and distributors.Cavins® Tools ........................................................................11-13 Mission Light Weight Bowl and Slip manufacture function and innovation into Chevron Inserts Type B Slip Solid Inserts for Mission 3½" Slim Hole Slips Large inventories of National Oilwell Varco’s conventional die and insert designs to Chevron Inserts Type C Slip Peck™.........................................................................................23 extensive product line are stocked at most make them work better, last longer, and Chevron Reducing Inserts Type B Slip Inserts and Parts For Peck #63 Tongs service locations, eliminating the need for cost less. Chevron Reducing Inserts Type C Slip Inserts For Ortco™ Bowls and Slips.........................................24 individual customer inventories. Circular Buttons Type B Slip 7" Bowl Quality Circular Buttons Type C Slip 5½" Bowl ! Consistent, accurate machining is National Oilwell Varco is a one-stop shop for Full Circle Inserts Type B Slip 4¼" Bowl assured by the use of computer- all of today"s handling tool expendable needs. Full Circle Inserts Type C Slip (2z" Body) 2d" Bowl controlled (CNC) manufacturing As always, the “Custom” Unconditional Full Circle Inserts Type C and CHD Slips (3½" Body) Varco® ....................................................................................25-26 equipment. Guarantee facilitates a no-risk product trial Full Circle Inserts Type C Slip (4½" Body) Circular Buttons for Varco Drill Collar Slips and ensures complete satisfaction. ! Long-wearing, durable components Full Circle Inserts Type F (3½", 5½", and 7s" Bodies) Circular Buttons for Varco Casing Slip (CMS-XL)Sure Grip Jaws ..........................................................................14 Circular Buttons for Varco Conductor Pipe Slip (CP-S) are the result of high-grade material Names You Trust Designed to Fit Eckel® 4½" Power Tong Inserts for Varco Rotary Slips selection and professional heat National Oilwell Varco is the OEM for all CDI Wraparound Dies for Sure Grip Jaw Inserts for Varco Casing Elevator Spider Slip treating techniques employed by and Varco/BJ dies and inserts. Parts For Sure Grip Jaw Weatherford® ..............................................................................27 National Oilwell Varco. All dies and inserts manufactured by National Wraparound Dies F/Eckel® and Farr® 5½" Tongs Contour Dies for Weatherford Power Tongs ! Consistent quality and proper fit are Oilwell Varco are under the Mission ProductsBilco™.........................................................................................15 Flat Dies for Weatherford Power Tongs guaranteed by extensive testing and umbrella. Inserts F/Bilco Dual Tools (2d" Body) Standard and Reducing Dies for Weatherford Power Tongs gauging programs utilized by Inserts F/Bilco Dual Tools (3½" Body) Woolley™....................................................................................28 National Oilwell Varco. Inserts F/Bilco Dual Tools (5½" Body) Inserts For Woolley Type A Drill Collar SlipContour Dies ..............................................................................16 Inserts For Woolley 4½" Type B Drill Pipe Slip Contour Dies F/Eckel® Power Tongs Inserts For Woolley 5½" Type B Drill Pipe Slip Contour Dies F/Eckel® 4½" Power Tongs Inserts For Woolley 4½" X-Long Rotary Slip Reducing Contour Dies F/Eckel® 4½" Power Tongs Inserts For Woolley 5" X-Long Rotary SlipFarr® ............................................................................................17 Inserts For Woolley Type C Casing Slip Contour Dies for Farr Power Tongs

BJ®, Hydra Rig®, Mission®, Varco® and Web Wilsion® are registered trademarks of ® Cavins is a registered trademark of Dawson Equipment Corporation. ®National Oilwell Varco. Eckel is a registered trademark of Eckel Manufacturing Company. ® Farr is a registered trademark of McCoy Corporation. Guiberson® is a registered trademark of Weatherford International Ltd. Weatherford® is a registered trademark of Weatherford International Ltd.

i ii ®MISSION PRODUCTS DIES AND INSERTS

Manual Tongs Manual Tongs

Tong DiesDie Slot CDI Varco/BJ Tong Dies OEM Weight Tooth # Tooth # Size Place of Use Reference #1" SLOT 6419011 N/A a" x 1" x 1," BJ® Type MS and MS Backup W/Slot 6209 0.19 6415024 N/A a" x 1" x 28" Web Wilson® Type E Tong 4216 0.19 6415032 N/A a" x 1" x 2½" Eckel® 4½" Tong, 4" and 4½" Jaw 85005112 0.25 6415040 N/A a" x 1" x 2s" w/slot BJ® CTS 4½", 5", and 5½" Tongs 30869 0.13 Reducing Dies 6400019 N/A a" x 1" x 3d" BJ® Powermatic Tong, Farr® Power Tong 6473 .38 REDUCING TONG DIES (1 " DIE SLOT ) Weatherford® 5½" and 7s" Tong P/N Description Reduction Weight 6415067 N/A a" x 1" x 1v" w/slot BJ® Powermatic and Hydratorc Tong 24554-2 0.19 6415113 v" x 1" x 3d" 8" Reduction 0.40 w/1" Die Slot (48"- 4½") 6415210 ½" x 1" x 3d" ¼" Reduction 0.45 6415075 N/A a" x 1" x 1v" w/slot 4½" Contour For CTS Tong 31175 0.19 6415229 ½" x 1" x 5" ¼" Reduction 0.50 6400027 N/A a" x 1" x 4¼" Web Wilson® Type C,D, and ADF Tongs 4316 0.38 6415318 b" x 1" x 2½" a" Reduction 0.54 BJ® 12612-1 6415326 b" x 1" x 3d" a" Reduction 0.48 6415091 N/A a" x 1" x 4½" Hillman-Kelley™ Backup Die 8500-5113 0.44 6415415 s" x 1" x 3d" ½" Reduction 0.50 6400035 N/A a" x 1" x 5¾" Web Wilson® Type B and Old Style AAX 4516 0.50 6415423 n" x 1" x 3d" s" Reduction 0.55 BJ® 12512 6415431 ¾" x 1" x 3d" ¾" Reduction 0.60 B+V™ "BV-37" 6415466 1" x 1" x 3d" 1" Reduction 0.70s" SLOT 6400086 N/A a" x s" x 1," BJ® Type S and WS Tongs 6472 0.10 REDUCING TONG DIES (1¼ " DIE SLOT; 2½" LONG ) Eckel® 4½" Tong, 2z" Jaw 101-257 6416110 v" x 1¼" x 2½" Standard 0.38 6440010 N/A a" x s" x 4½" Hillman-Kelley™ Standard 8500-5565 0.24 6416209 ½" x 1¼" x 2½" 8" Reduction 0.40 All Sizes Drill Pipe and Casing Power Tongs 6416217 b" x 1¼" x 2½" ¼" Reduction 0.411¼" SLOT 6416012 N/A ½" x 1¼" x 3d" BJ® Drill Pipe Power,Tong 24768-2 0.55 6416314 s" x 1¼" x 2½" a" Reduction 0.45 Eckel® 5½" - 30" Power Tongs 101-251 6416411 n" x 1¼" x 2½" ½" Reduction 0.49 Farr® Power Tongs 337-02-098 REDUCING TONG DIES (1¼ " DIE SLOT; 3d" LONG ) 6416020 6416401-2 ½" x 1¼" x 5" BJ® Types SDD, C, F and LF Tong 16401-2 0.75 6416128 v" x 1¼" x 3d" 8" Undersize 0.50 BJ® Power Casing Tong (4½" - 13a") 6416225 b" x 1¼" x 3d" 8" Reduction 0.63 Woolley™ Type Super C, SLF and SDD Tong 627-185-1500 6416322 s" x 1¼" x 3d" ¼" Reduction 0.69 Eckel® Model 850 103426 6416420 n" x 1¼" x 3d" a" Reduction 0.77 Web Wilson® 4616 6416519 ¾" x 1¼" x 3d" ½" Reduction 0.83 B + V™ "BV-25", "BV-35", "BV-100" 6416616 m" x 1¼" x 3d" s" Reduction 0.88 6416039 6416402-2 ½" x 1¼" x 5d" BJ® Type B and DB Tongs 16402-2 0.84 6416713 d" x 1¼" x 3d" ¾" Reduction 0.95 Web Wilson® Types AAX, H and AAX-ST-160 4716 6416810 ," x 1¼" x 3d" d" Reduction 1.16 Woolley™ Type Super A 627-185-1578 6416918 1" x 1¼" x 3d" 1" Reduction 1.25 Super B Rotary and Super B Casing Tongs 6416900 1z" x 1¼" x 3d" 18" Reduction 1.30 B+V™ "BV-55", "BV-57", "BV-65", "BV-80" REDUCING TONG DIES (1¼ " DIE SLOT; 5d" LONG )DIAMOND TOOTH TONG DIES 6416926 1" x 1¼" x 5d" 1" Reduction 1.69Die Slot CDI # Size Place Of Use OEM Ref. # Weight REDUCING TONG DIES (s" DIE SLOT )1" 6419054 a" x 1" x 3d" Same as 6400019 above N/A 0.38 6440010 a" x s" x 4½" Standard 0.241" 6419089 a" x 1" x 5¾" Same as 6400035 above N/A 0.50 6440029 c" x s" x 4½" 8" Undersize 0.20s" 6440436 a" x s" x 4½" Same as 6440010 above N/A 0.24 6440061 A" x s" x 4½" c" Reduction 0.341¼" 6419518 ½" x 1¼" x 3d" Same as 6416012 above N/A 0.55 6440045 s" x s" x 4½" ½" Reduction 0.401¼" 6419577 ½" x 1¼" x 5" Same as 6416020 above 16401-6 0.75 6440053 n" x s" x 4½" s" Reduction 0.431¼" 6419666 ½" x 1¼" x 5d" Same as 6416039 above 16402-6 0.84Trademarks or service marks not affiliated, connected, or associated with National Oilwell Varco do not expresslysponsor, approve, or endorse any of the products or services offered by National Oilwell Varco.

1 2 ®MISSION PRODUCTS DIES AND INSERTS

3 4 ®MISSION PRODUCTS DIES AND INSERTS

5 6 ®MISSION PRODUCTS DIES AND INSERTS

7 8 ®MISSION PRODUCTS DIES AND INSERTS

BJ® Tools BJ® ToolsElevator Inserts * REDUCING TYPE INSERTS FOR BJ ELEVATORS (YC THROUGH 1000 TON) NUMBER OF INSERTS REQUIRED P/N DESCRIPTION OEM REF # SLIP PIPE YC 7s" 13a" 13a" 10¾" 14" WT. SIZE SIZE (OD) 175 TON 350 TON 500 TON 500 TON 1000 TON EA. (OZ) 6472141 Reducing Insert 32477 9s" 9¾" 72 90 90 8 6472150 Reducing Insert 34029 9s" 8¾" 72 90 90 16 6472079 Reducing Insert 25474 9s" 8 6/8" 72 90 90 17 6472150 Reducing Insert 34029 10¾" 9d" 72 90 16 6472265 Reducing Insert 33249 10¾" 9s" 72 90 18 6472214 Reducing Insert 39285 10d" 10¾" 126 9 6472222 Reducing Insert 39286 10d" 10s" 126 10 6472230 Reducing Insert 39287 10d" 10½" 126 11 6472249 Reducing Insert 39288 10d" 10a" 126 13 6472095 Reducing Insert 32700 10d" 10¼" 126 14 6472257 Reducing Insert 39289 10d" 108" 126 15 6472150 Reducing Insert 34029 10d" 10" 126 16 6472079 Reducing Insert 25474 10d" 9d" 126 17 6472265 Reducing Insert 33249 10d" 9¾" 126 18 6472273 Reducing Insert 39290 10d" 9s" 126 19 6472150 Reducing Insert 34029 11¾" 10d" 72 105 126 16 Dies 6472079 Reducing Insert 25474 11¾" 10¾" 72 105 17 P/N Description OEM Reference # Weight 6472214 Reducing Insert 39285 12½" 12a" 144 9 CURVED FACED DIES FOR BJ POWERMATIC AND HYDRATORC TONGS 6472222 Reducing Insert 39286 12½" 12¼" 144 10 6470017 2d" Directional Tooth 27498-1 1.00 6472230 Reducing Insert 39287 12½" 128" 144 11 6472249 Reducing Insert 39288 12½" 12" 144 13 6470025 2a" Directional Tooth 27494-1 1.00 6472095 Reducing Insert 32700 12½" 11d" 144 14 6470114 2d" Straight Tooth N/A 1.00 6472257 Reducing Insert 39289 12½" 11¾" 144 15 6470980 2d" Fine Tooth N/A 1.00 6472150 Reducing Insert 34029 12½" 11s" 144 16 6470122 2a" Straight Tooth N/A 1.00 6472079 Reducing Insert 25474 12½" 11½" 144 17 6470955 2a" Fine Tooth N/A 1.00 6472265 Reducing Insert 33249 12½" 11a" 144 18 6470211 1.660" 29313 1.00 6472273 Reducing Insert 39290 12½" 11¼" 144 19 6470220 1.900" 29312 1.00 6472141 Reducing Insert 32477 12¾" 12d" 8 6472150 Reducing Insert 34029 12¾" 11d" 16 6470238 2" and 2z" 29311 1.00 6472079 Reducing Insert 25474 12¾" 11¾" 17 Note: These dies are machined, not cast. 6472141 Reducing Insert 32477 13a" 13½" 84 135 16 6472095 Reducing Insert 32700 13a" 12¾" 84 135 14 REDUCING CURVED FACED DIES FOR BJ POWERMATIC AND HYDRATORC TONGS 6472150 Reducing Insert 34029 13a" 12½" 84 135 16 6470947 2d"x 2a" N/A 1.50 6472214 Reducing Insert 39285 14" 13d" 162 9 6470726 2d"x 2z" N/A 1.80 6472222 Reducing Insert 39286 14" 13¾" 162 10 6470734 2d" x 1½" (1.90") N/A 1.88 6472230 Reducing Insert 39287 14" 13s" 162 11 6472249 Reducing Insert 39288 14" 13½" 162 13 6470742 2d"x 1¼" (1.660") N/A 2.13 6472095 Reducing Insert 32700 14" 13a" 162 14 6470750 2d"x 1" (1.315") N/A 2.25 6472257 Reducing Insert 39289 14" 13¼" 162 15 6470319 2a"x 2z" N/A 1.37 6472150 Reducing Insert 34029 14" 138" 162 16 6470327 2a" x 1½" (1.90") N/A 1.50 6472079 Reducing Insert 25474 14" 13" 162 17 6470335 2a" x 1¼" (1.660") N/A 1.68 6472265 Reducing Insert 33249 14" 12d" 162 18 6470343 2a"" x 1" (1.315") N/A 1.94 6472273 Reducing Insert 39290 14" 12¾" 162 19 Note: These dies are machined, not cast. 6472729 Reducing Insert 32561 20" 18s" 108 24 6472702 Reducing Insert ½ len 20" 18s" 36 12 * These Inserts also fit Blohm + Voss™ Slip Type Casing Elevators and New Deal Casing Spiders.

9 10 ®MISSION PRODUCTS DIES AND INSERTS

11 12 ®MISSION PRODUCTS DIES AND INSERTS

Cavins® Tools Sure Grip Jaws Dies and Parts DESIGNED TO FIT ECKEL® 4½" POWER TONG P/N Description #/Set Weight CDI-1410 3½" Jaw w/Roller, Pin & Die Retainer Pin 2 7.70 CDI-1450 2a" Jaw w/Roller, Pin & Die Retainer Pin 2 9.50

WRAPAROUND DIES FOR SURE GRIP JAW P/N Description Weight 6414117 3½" x 3½" 1.25 6414125 3½" x 2d" 2.00 6414133 3½" x 2a" 2.75 6414168 3½" x 2.776" 2.00 6414176 3½" x 3.063" 1.80 6414184 3½" x 2.970" 1.90 6414192 3½" x 3.625" 1.20 6414206 3½" x 3.668" 1.20 6414214 3½" x 3½" Fine Tooth 1.25 6414222 3½" x 2d" Fine Tooth 2.00 6414230 3½" x 2a" Fine Tooth 2.75 6414311 3½" x 3½" Fine Tooth Pyramid 1.25 6414320 3½" x 2d" Fine Tooth Pyramid 2.00 6414338 3½" x 2a" Fine Tooth Pyramid 2.75 6414516 2a" x 2a" 1.00 6414524 2a" x 2z" 1.30 6414540 2a" x 1¼" 1.63Slip Inserts and Parts 6414710 2a" x 2a" Fine Tooth Pyramid 1.00 P/N Description OEM Reference # #/Set Weight 6414729 2a" x 2z" Fine Tooth Pyramid 1.30 * FULL CIRCLE INSERTS FOR CAVINS TYPE F (3½" BODY) 6414737 2a" x 1¼" Fine Tooth Pyramid (1.66") 1.63 6492019 3½" x 3½" TF-650-3½" 4 30.00 6492029 3½" x 2d" TF-651-3½" x 2d" 4 35.00 PARTS FOR SURE GRIP JAW 6492037 3½" x 2a" TF-651-3½" x 2a" 4 40.00 P/N Description Weight 6414010 Die Retainer Pin 0.13 * FULL CIRCLE INSERTS FOR CAVINS TYPE F (5½" BODY) CDI-1210 Roller 1.00 6492118 5½" x 5½" TF-650-5½" 4 40.00 CDI-1211 Roller Pin 1.06 6492126 5½" x 5" TF-651-5½" x 5" 4 51.00 6492134 5½" x 4½" TF-651-5½" x 4½" 4 64.00 WRAPAROUND DIES TO FIT ECKEL® AND FARR® 5½" TONGS 6492142 5½" x 4" TF-651-5½" x 4" 4 71.00 P/N Description #/Set Weight 6410839 2d" x 3½" Die 2 2.00 * FULL CIRCLE INSERTS FOR CAVINS TYPE F (7s" BODY) 6410812 2d" x 2d" Wraparound Die 2 2.50 6492215 7s" x 7s" TF-650-7s" 4 53.00 6410820 2d" x 2a" Wraparound Die 2 2.90 6492223 7s" x 7" TF-651-7s" x 7" 4 70.50 6904580 Bushing and Screw For 2d" Converted Jaw 4 0.06 6492231 7s" x 6s" TF-651-7s" x 6s" 4 82.00 CDI-1098 5½" Converted Jaw (w/trade) 2 6410910 5½" x 5½" Wraparound Die 2 2.20 PARTS FOR CAVINS TYPE F SLIPS 6410952 5½" x 5" Wraparound Die 2 3.40 P/N Description #/Set Weight 6410928 5½" x 4½" Wraparound Die 2 4.00 6490506 Insert Retainer Pin 4 0.25 6410936 5½" x 4" Wraparound Die 2 4.40 6410944 Bushing and Screw For 5½" Converted Jaw 4 0.20 * There are 2 Slip Assemblies per tool. 6410960 7" x 7" Wraparound Die 2 6410979 7s" x 7s" Wraparound Die 2

13 14 ®MISSION PRODUCTS DIES AND INSERTS

DiesInserts P/N Description OEM Reference # #/Set WeightP/N Description #/Slip Assembly* Weight CONTOUR DIES FOR ECKEL® POWER TONGS (LENGTH OF DIE 3d")** INSERTS FOR BILCO DUAL TOOLS (2d" BODY) 6410081 2a" Reg. Contour 101245 4 0.636465013 2d" x 2d" 9 1.00 6410090 2d" Reg. Contour 101247 4 0.636465021 2d" x 2a" 9 1.40 6410103 3½" Reg. Contour 101249 4 0.636465030 2d" x 2z" 9 1.60 6410111 4" - 5½" Reg. Contour N/A 4 0.636465048 2d" x 1½" (1.90") 9 1.75 6410120 6s" - 7s" Reg. Contour N/A 4 0.636465056 2d" x 1¼" (1.66") 9 1.87 6410138 8s" - 9s" Reg. Contour N/A 4 0.636465064 2d" x 1" (1.315") 9 2.00 6410146 10¾" Reg. Contour N/A 4 0.63 6410227 2a" Fine Tooth Contour N/A 4 0.63** INSERTS FOR BILCO DUAL TOOLS (3½" BODY) 6410235 2d" Fine Tooth Contour N/A 4 0.636466010 3½" x 3½" 9 1.05 6410243 3½" Fine Tooth Contour N/A 4 0.636466028 3½" x 2d" 9 1.25 6410316 2a" Fine Tooth Pyramid Contour N/A 4 0.636466036 3½" x 2a" 9 1.50 6410324 2d" Fine Tooth Pyramid Contour N/A 4 0.63 6410332 3½" Fine Tooth Pyramid Contour N/A 4 0.63** INSERTS FOR BILCO DUAL TOOLS (5½" BODY)6466230 5½" x 3½" 9 CONTOUR DIES FOR ECKEL® 4½" POWER TONGS (LENGTH OF DIE 2½")6466240 5½" x 2d" 9 6411010 2a" Reg. Contour 103642 4 0.406466260 5½" x 2a" 9 6411029 2d" Reg. Contour 103643 4 0.40 6411037 3½" Reg. Contour 103644 4 0.40* There are 2 Slip Assemblies per tool. 6411223 2a" Fine Tooth Contour N/A 4 0.40** These inserts fit the Gemoco™ Dual Tools, B & W™ Dual Tools and the Bilco Dual Tools (2d" Body). 6411231 2d" Fine Tooth Contour N/A 4 0.40 6411240 3½" Fine Tooth Contour N/A 4 0.40 6411258 4½" Fine Tooth Contour N/A 4 0.40 6411320 2a" Fine Tooth Pyramid Contour N/A 4 0.40 6411339 2d" Fine Tooth Pyramid Contour N/A 4 0.40 6411347 3½" Fine Tooth Pyramid Contour N/A 4 0.40 6411355 4½" Fine Tooth Pyramid Contour N/A 4 0.40

REDUCING CONTOUR DIES FOR ECKEL® 4½" POWER TONGS (2a" JAW) 6411517 2a" x 2z" N/A 4 0.50 6411525 2a" x 1½" (1.90") N/A 4 0.56 6411533 2a" x 1¼" (1.66") N/A 4 0.63 6411541 2a" x 1" (1.315") N/A 4 0.72 Trademarks or service marks not affiliated, connected, or associated with National Oilwell Varco do not expressly sponsor, approve, or endorse any of the products or services offered by National Oilwell Varco.

15 16 ®MISSION PRODUCTS DIES AND INSERTS

Farr® Foster™ Dies and Parts P/N Description OEM Reference # #/Set Weight DIES AND PARTS FOR FOSTER #58 TONGS 6480012 Model #58 Die 50-48-1 10 0.53 6480900 Model #58 Diamond Die 10 0.53 6902952 Model #58 Insert Screw 50-49-2 20 0.06 6480993 Model #58 Screw & Nut N/A 10 0.10 6903185 Model #58 Drag Spring 50-57 5 0.06 6903169 Model #58 Nylon Drag Plug 50-58 5 0.06 6960227 Model #58 Set Screw 11-147 5 0.16

6480128 Model #58 3½" Jaw 50-22-8 5 5.00 6480136 Model #58 4½" x 5b" Jaw 147-10 5 1.85 6480144 Model #58 4" - 5" Jaw 50-22-12 5 5.00 6480187 Backup Jaw 5½" - 6¼" 147-8 5 1.56 6480268 Model #58 2z" Die 10Dies CONTOUR DIES FOR FARR POWER TONGS (LENGTH OF DIE 3d") DIES AND PARTS FOR OTHER FOSTER TONGS P/N Description #/Set Weight 6480217 Model #79 2a"- 2d" Die 79-48-1 5 1.94 6410081 2a" Reg. Contour 4 0.63 6480225 Model #74 2a" - 2d" Die 74-75 10 0.55 6410090 2d" Reg. Contour 4 0.63 6902960 Model #74 Insert Screw 54-49 20 0.06 6410103 3½" Reg. Contour 4 0.63 6903177 Model #74 Drag Plug 59-64 5 0.06 6410111 4" - 5½" Reg. Contour 4 0.63 6903193 Model #74 Drag Spring 50-57-1 5 0.06 6410120 6s" - 7s" Reg. Contour 4 0.63 6410138 8s" - 9s" Reg. Contour 4 0.63 6410146 10¾" Reg. Contour 4 0.63 6410227 2a" Fine Tooth Contour 4 0.63 6410235