hydraulic power tong 80000 torque made in china

The Casing Power Tong is used to make up and break out for casing operation in oilfields. It hasgreatly reduced the labor of worker, enhanced connection qualityof thread and diminished accidents in inappropriate casing operation. The powertong has the following features :

The HD31000 casing tong can handle tubulars as small as 10-3/4″ and as large as 31″ in diameter. Other sizes can be special-ordered. Tong can be mounted on either a CLINCHER® or a FARR® hydraulic backup. Available with McCoy’s patented WinCatt® data acquisition and torque control system for the make-up of tubular connections.

Casing Tongs:Casing power tongs are used to make or break casing tubulars placed in the drill hole in order to maintain the opening of the well. They come in a variety of sizes that measure anywhere from 5 ½ feet to 36 feet, and are designed to deal with lightweight, or high torque casing. Casing tongs are also available in a variety of models, with torques ranging from 15,000 to 200,000 foot-pounds. Consistent operations among the different models minimize the need for employee training.

Tubing Tongs:The main purpose of tubing power tongs is to run tubulars in order to extract oil and gas from reservoirs. Ruggedly designed, they provide steady, and reliable performance, even at higher torques. Like casing tongs, they also come in a variety of models depending on your torque specifications.

Drill Pipe Tongs:Drill pipe power tongs form drill strings by screwing together drill pipe, and industrial tubular used for drilling into the ground. These tongs are effective at lowering drill time, and reducing costs. Designed for safe, and quick make-up, they come in sizes 2.36 to 10 inches, and include a variety of models.

Riser Tongs:Risers are similar to pipelines in that they are conduits that move materials from the blowout preventer, located on the seafloor, to a drilling rig or floating production structure. Like flowlines, drilling risers transfer mud during the drilling stages while production risers carry over production materials, and hydrocarbons. Manufacturers of premium pipes have created threaded risers that are sealable, fatigue-resistant, and high-pressure– ideal for deep-water drilling.

The new 7.25 HS HT-80 for Drill Pipe and High Torque Casing Tong takes on the toughest job with make-up and break-out of drill pipe, drill collars, and high torque casing with a maximum torque of 80,000 ft-lbs. The 7.25 HS HT-80 is available with a two-speed Hydra-Shift® motor coupled with a two-speed gear train providing (4) torque levels and (4) RPM speeds. The variable speeds can slowly or quickly spin tubular 2⅜ through 7¼ inch as necessary. Having exceptional gripping capabilities with rig dies for drill pipe or wrap-around dies that securely encompass the tubular limit potential for damage. The 7.25 HS HT-80 is also available with Eckel Pyramid Fine Tooth dies, or True-Grit dies. The 7.25 HS HT-80 is another of our tongs models that exceed the competition in its class.

For casing up to 22 inches, here"s a tong that has strong torquing ability and will handle pipe sizes down to 7 inch. The tong utilizes a two-speed motor and a two-speed gear train, allowing the operator to correctly adjust the tong for the optimum torque and RPM needed for the current application. Maximum torque for the 22 Hydra-Shift® is 80,000 ft-lb.

TQ508/70 Casing Power Tong is used to make up and break out for casing operation in oil fields. It has greatly reduced the labor of worker, enhanced connection quality of thread and diminished accidents in inappropriate casing operation. The power tong has the following features as well:

The 14-100 hydraulic power tong provides 100,000 ft-lb (135,600 N∙m) of torque capacity for running and pulling 7- to 14-in. casing. The tong has a unique gated rotary, a free-floating backup, and a hydraulic door interlock.

Our 14-50 high-torque casing tong provides 50,000 ft-lb (67,790 N∙m) of torque capacity for running and pulling 6 5/8- to 14-in. casing. The tong has a unique gated rotary, a free floating backup, and a hydraulic door interlock.

The 16-25 hydraulic casing tong provides 25,000 ft-lb (33,900 N∙m) of torque capacity for running and pulling 6 5/8- to 16-in. casing. The tong features a unique gated rotary and as many as seven contact points that create a positive grip without damaging the casing.

Rigged up without rig modifications, our 21-300 riser tong is the only tong capable of producing 300,000 ft-lb (406,746 N∙m) of continuous rotational torque in both makeup and breakout mode. The power it achieves in a compact size compares with a conventional 24-in. casing tong.

The 24-50 high-torque casing tong provides 50,000 ft-lb (67,790 N∙m) of torque capacity for running and pulling 10 3/4- to 24-in. casing. The tong features a unique gated rotary, a free-floating backup, and a hydraulic door interlock.

The 30-100 high-torque casing tong provides 100,000 ft-lb (135,600 N∙m) of torque capacity for running and pulling 16- to 30-in. casing. The tong features a unique gated rotary, a free-floating backup, and a hydraulic door interlock.

The 5.5-15 hydraulic tubing tong provides 15,000 ft-lb (20,340 N∙m) of torque capability for makeup and breakout of 1.66- to 5.5-in. tubing and premium or standard connections on corrosion‑resistant alloy tubulars. The tong features an ergonomic, lightweight design with a free-floating hydraulic backup.

The 7.6-30 hydraulic tubing tong provides 30,000 ft-lb (40,670 N∙m) of torque capability for makeup and breakout of 2 3/8- to 7 5/8-in. tubing and premium or standard connections on corrosion‑resistant alloy tubulars. The tong features an ergonomic, lightweight design with a free-floating hydraulic backup.

Our SpeedTork 8.0-70 tong provides torques up to 70,000 ft-lb (94,900 N∙m) and 360° rotation in makeup and breakout operations. It can torque drillpipe connections, drillstring components, drilling tools, packers, couplings, and valves.