model kht14000 casing power tong with backup made in china

KHT14000 Casing Power Tong is used to make up and break out for casing operation in oil fields. It has greatly reduced the labor of worker, enhanced connection quality of thread and diminished accidents in inappropriate casing operation. The power tong has the following features as well:

The Casing Power Tong is used to make up and break out for casing operation in oilfields. It has greatly reduced the labor of worker, enhanced connection qualityof thread and diminished accidents in inappropriate casing operation. The powertong has the following features :

They are exported to Russia, America, Middle East, South America, Southeast Asia, Central Asia , African, Australia,Europe etc.Our company is willing to cooperate and make common progress with friends at home and abroad with first-class products, first-class service and reasonable prices.

The Casing tong is used to make up and break out for casing operation in oil fields. It has greatly reduced the labor of worker, enhanced connection quality of thread and diminished accidents in inappropriate casing operation. The power tong has the following features as well:

TTMC ProTM oil/casing torque measuring instrument can be applied for the pipe operations, monitoring and controlling the operation quality of both offshore and land drilling platforms. The device provides two operation modes and four measuring methods, which can monitor and control the standard makeup torque in real time, so that the oil and casing pipe can reach the standard setting value, and can monitor the oil and casing pipe with special makeups to achieve the best sealing state. TTMC Pro monitoring system consists of a host machine, a data signal line, a tension/turn sensor, and an electromagnetic relief valve. After the several wells operation, it is proved that this instrument has high practical value for ensuring the operation quality of the oil and casing job, and reducing accidents and improving work efficiency.

The series of hydraulic power tongs adopt inner cam rolling-up clamping mechanism, with a hydraulic backup tong. It is an ideal tool for makeup or breakout of various of tubings, and small sizes of casings and drill pipes in workover operation. The tong with extra long rod is available for backup tong to grip tubing body. The power tong also can be equipped with automatic torque control system.

KHT14000 Kućište Snaga Tong se koristi za nadoknadu i probijanje za rad kućišta u naftnim poljima. To je u velikoj mjeri smanjilo rad radnika, poboljšao kvalitet povezivanja konca i smanjilo nezgode u neprikladnom radu kućišta. Snaga ima i sledeće karakteristike:

Model XQ28/2.6 hydraulic power tong is an improved type of XYQ1.8 which is used to make up and break out sucker rod thread in Well Service. This product has the following features:

A. The structure is compact, concise and light. Master tong is driven by a low-speed large torque hydraulic motor that matches with a manual control valve. The backup tong is just like a spanner. The total weight is approximately equal to XYQ1.8.

B. The operating is briefness and convenience with high efficiency. Put the respondence size jaw set into master tong and the respondence size glutting into backup tong, turning the reset knob incorrect direction then can make up and break out sucker rod by operating manual control valve. Two speed, snapping at low speed, spinning at high speed.

An excellent choice where applications demand the combination of size range and high torque output, the Eckel Model 14 UHT handles pipe from 4 inches to 14 inches. This tong features our new patented CASE STIFFENERS that enhances overall torque output. Upgraded in design and performance over the Model 14 HS, this tong can deliver 70,000 ft-lb of torque. Also, available with Wedge Drive Tri-Grip® backup, which handles pipe from 4 inches to 15.5 inches.

Our patented CASE STIFFENER technology enhances overall torque to provide consistent torque output. Having a high full 360° rotational torque and speed-shifting capability ensures the tong can makeup special torque-turn connections that require continuous rotation. Also, the CASE STIFFENER technology reduces stress and wear on the rotary gear teeth.

The WD Tri-Grip® Backup is a high performance no compromise backup that is suitable for make-up and break-out of the most resilient connections. The WD Tri-Grip® Backup features a three head design that encompasses the tubular that applies an evenly distributed gripping force. The backup is capable of handling tubular from 1.050 in. to 15.5 in. (26.67 - 393.7 mm). A constant radial load is applied when a single wedge drive to actuate the front two pivot heads with a third stationary head providing a reactionary force to provide superior gripping performance. Wedge Drive Tri-Grip® Backup has exceptional gripping capabilities with Rig Dies when running drill pipe or optional Eckel Wrap-Around True-Grit® dies or Pyramid Fine Tooth dies for making up other types of tubular.

Except for added torque (up to 25,000 ft-lb) and expanded pipe capacity (from 4 to 13⅜ inches), the 13⅜ Standard tong offers the same basic engineering and designs the smaller, lighter Model 10¾. Highly recommended where applications demand the ultimate in a size range and torque output.

The Tri-Grip® Backup is the industry standard for reliable make-up and break-out of tubular connections that are optionally supplied with Eckel tongs. Utilizing two hydraulic cylinders and a three head arrangement ensures a slip-free operation. The backup is suspended at an adjustable level below the power tong using three hanger legs and allows the backup to remain stationary while the power tong moves vertically to compensate for the connection"s thread travel. The Tri-Grip® uses two pivoting heads and one stationary. The Eckel Tri-Grip® Backup has exceptional gripping capabilities with Rig Dies when running drill pipe or optional Eckel Wrap-Around True-Grit® dies or Pyramid Fine Tooth dies for making up other types of tubular.