power tong hand supplier

Model XQ28/2.6 hydraulic power tong is an improved type of XYQ1.8 which is used to make up and break out sucker rod thread in Well Service. This product has the following features:

A. The structure is compact, concise and light. Master tong is driven by a low-speed large torque hydraulic motor that matches with a manual control valve. The backup tong is just like a spanner. The total weight is approximately equal to XYQ1.8.

B. The operating is briefness and convenience with high efficiency. Put the respondence size jaw set into master tong and the respondence size glutting into backup tong, turning the reset knob incorrect direction then can make up and break out sucker rod by operating manual control valve. Two speed, snapping at low speed, spinning at high speed.

A two-speed Hydra-Shift® motor coupled with a two-speed gear train provides (4) torque levels and (4) RPM speeds. Easily shift the hydraulic motor in low speed to high speed without stopping the tong or tublar rotation, saving rig time.

A patented door locking system (US Patent 6,279,426) for Eckel tongs that allows for latchless locking of the tong door. The tong door swings easily open and closed and locks when torque

is applied to the tong. When safety is important this locking mechanism combined with our safety door interlock provides unparalleled safety while speeding up the turn around time between connections. The Radial Door Lock is patented protected in the following countries: Canada, Germany, Norway, United Kingdom, and the United States.

The field proven Tri-Grip® Backup features a three head design that encompasses the tubular that applies an evenly distributed gripping force. The Tri-Grip®Backup provides exceptional gripping capabilities with either Eckel True Grit® dies or Pyramid Fine Tooth dies. The hydraulic backup is suspended at an adjustable level below the power tong by means of three hanger legs and allowing the backup to remain stationary while the power tong moves vertically to compensate for thread travel of the connection.

A wide variety of power tong tools options are available to you, You can also choose from electric drill, sander power tong tools,As well as from 3 years, {2}, and {3}. And whether power tong tools is ul, {2}, or {3}.

They can also be made from synthetic fiberslass, aluminum, plastic, silicone, and polyurethane.Phase power tongs are designed to lighten and pressure from the base of the vehicle.

They are simple and lightweight, easy to transporting. On the other hand, power tongs have different functionality. In technology, locking fosters have friendship as well as a kind of power tongs.

Electric power tongs are great for those who need to check the condition of their equipment. Explore Alibaba.com to find more electric power tongs for sale, such as gold power tongs, mining power tongs for sale, and electric power tongs for all purpose. Find mining equipment suppliers on Alibaba.com to provide your customers with electric power tongs for all mining purposes.

Mining people are more sensitive to the tools they to. There is also a need for fostering recovery of mining mins, and in some cases, the as common as these power tongs for mining are other tools. It"s common for some miningers to have a fostering recovery on mining, and in the case of mining gold.

Manufacturer of motor operated hydraulic power tongs. Tubing, casing, drill pipe and riser hydraulic power tongs are available. Offered with self aligning throat, speed shifting and radial lock door. Optional torque control system, door interlock, wrap-around dies, integrated hydraulic backups, case handles, tong straps, motor port relief valve and finger guard protection are provided. Suitable for oil or gas drilling, well completion and servicing applications. Secondary services include assembly, engineering, welding, cutting, heat treating, machining, testing and inspection. Serves oil and gas industries. CE certified. Made in the USA.

The 9-5/8” power tong with Rineer GA15-13 two-speed hydraulic motor, motor valve, lift cylinder valve, rigid sling, FARR® hydraulic backup, configured for compression load cell.

Power tongs are an essential tool in the drilling industry and are used to make up, break out, apply torque and to grip the tubular components. We are distributors for both Starr Power Tongs and McCoy Global hydraulic power tongs in multiple sizes and torque ranges from high torque to low torque that can be used to run both casing, drill pipe and tubing. When determining which power tong is best for your project, you will want to select the power tong that best fits your tubular size ranges and torque required.

All of our power tongs are available with either the McCoy\\\\\\\\\\\\\\\"s patented WinCatt data acquisition software recently updated to the MTT systems or AllTorque\\\\\\\\\\\\\\\"s computer monitoring system for all the torque and turn control system needed in today\\\\\\\\\\\\\\\"s market for the making of tubular connections. Discover our wide selection of McCoy and Starr casing tongs, tubing tongs and power tongs for sale below!

Straight Tong Die Driver: Used for die slot redressing, the straight tong die driver is the simplest of type of rig tong. Though it is also the simplest type of rig tong to use, it is also the least safe of the three. Its handle and handguard protect hammer blows from falling onto the grip. Straight tong die drivers are lightweight—under eight pounds—and measure in at around 1”.

Angled Tong Die Driver: The angled tong die driver has a grip that’s angled away from the perpendicular tong as well as brass guards for the tong tip and handle, making this rig tong safer than the straight tong die driver. While this tong is safer, however, it’s actually harder to keep the angle tong die driver in place. This driver is similar in length to the straight tong die driver, but is about two pounds heavier, weighing in at over nine pounds.

Hammerless Tong Die Driver: This variety of tong die driver is made up of a hand pipe that can be used to apply pressure to the tong’s tip without using a hammer at all. This option is the safest of the three driver types because there’s no hammer required, it’s also the slowest driver for this same reason. The hammerless tong die driver is about as long and weighs as much as the straight tong die driver.

What oilfield tools does your operation need? Keystone Energy Tools has atool to fit your bill.Contact us today to learn more about how rig tongs can make your work environment safer, and to learn more our other oil and gas industry products.

Company reviews can provide helpful insights into the company culture, working conditions, benefits, compensation, and training opportunities in Eckel | Hydraulic Power Tongs.

Pathmaker has continually expanded our fleet of power tong equipment since 1981. We take pride in consistently delivering a superior service to our customers. Attention to details and regular maintenance in conjunction with proper training and certifications guarantees our equipment is operated in the safest manner on your job site

It is our goal to be able to offer safe and quality work with both integrity and efficiency. We operate, following the rules and guidelines in our OH&S handbook, along with COR, ISNET, and HSE requirements. We believe that safety and productivity of our company is directly related to those working for us and therefore our policies regarding drug and alcohol are strictly enforced to ensure the safety of all those involved. Improving safety is an ongoing commitment, with constant evaluation of policies and procedures and implementation of improvements.

Pathmaker combines experienced crews with the latest power tong equipment. We offer Integral, Conventional, and High Torque Power Tong services.Power Tong services include:Handling equipment, including rotary slips, spiders, and single joint elevators

Pathmaker Services Power Tong fleet consists of top of the line outfitted units available. Proper maintenance ensures that our customers are receiving reliable and maintained equipped units every time.

Pathmaker uses WinCatt software for our Computer Torque Monitoring services. WinCatt interacts with Pathmaker"s control hardware, providing real-time monitoring and control of tubular connection power tong make-up to ensure your connections are completed to the exact manufacturer"s specification for premium connections, shouldering time, delta torque, delta slope, and delta turns. Pathmaker also uses WinnCatt to provide a summary report of your make up results to prepare torque graphs for each joint.