remanufacturer hydraulic power tong supplier

A two-speed Hydra-Shift® motor coupled with a two-speed gear train provides (4) torque levels and (4) RPM speeds. Easily shift the hydraulic motor in low speed to high speed without stopping the tong or tublar rotation, saving rig time.

A patented door locking system (US Patent 6,279,426) for Eckel tongs that allows for latchless locking of the tong door. The tong door swings easily open and closed and locks when torque

is applied to the tong. When safety is important this locking mechanism combined with our safety door interlock provides unparalleled safety while speeding up the turn around time between connections. The Radial Door Lock is patented protected in the following countries: Canada, Germany, Norway, United Kingdom, and the United States.

The field proven Tri-Grip® Backup features a three head design that encompasses the tubular that applies an evenly distributed gripping force. The Tri-Grip®Backup provides exceptional gripping capabilities with either Eckel True Grit® dies or Pyramid Fine Tooth dies. The hydraulic backup is suspended at an adjustable level below the power tong by means of three hanger legs and allowing the backup to remain stationary while the power tong moves vertically to compensate for thread travel of the connection.

The GOM"s technicians trained on the top Power Tong manufacturers products. One last thing ... if the power tong has old technology - It will be upgraded.

The 9-5/8” power tong with Rineer GA15-13 two-speed hydraulic motor, motor valve, lift cylinder valve, rigid sling, FARR® hydraulic backup, configured for compression load cell.

Power tongs are an essential tool in the drilling industry and are used to make up, break out, apply torque and to grip the tubular components. We are distributors for both Starr Power Tongs and McCoy Global hydraulic power tongs in multiple sizes and torque ranges from high torque to low torque that can be used to run both casing, drill pipe and tubing. When determining which power tong is best for your project, you will want to select the power tong that best fits your tubular size ranges and torque required.

All of our power tongs are available with either the McCoy\\\\\\\\\\\\\\\"s patented WinCatt data acquisition software recently updated to the MTT systems or AllTorque\\\\\\\\\\\\\\\"s computer monitoring system for all the torque and turn control system needed in today\\\\\\\\\\\\\\\"s market for the making of tubular connections. Discover our wide selection of McCoy and Starr casing tongs, tubing tongs and power tongs for sale below!

MOT"s Hydraulic Power Tongs are used for running or pulling tubular strings during well repair, workover, snubbing, drilling and casing operations to extract oil and gas from wells. MOT’s

Our TEDA Style power tongs apply correct, uniform torque, reducing costly rod and tubing failures, delivering ample power to make up and break out rods and tubulars from 5/8” rod to 5-1/2” casing. Our series of XQ power tongs come with Bi-Directional jaw systems that save time and enhance safety, and go from make to break with the flip of a knob.

Tongs offer a variety of upgrades from our standard XQ series of TEDA Style models featuring Eaton hydraulic motors for extra torque and reliability, two or three spool directional control valves for more efficient hydraulic operations, and modified structures for higher strength, durability and adaptability to specific job requirements.

Are available from 5-1/2” to 20” pipe and are able to handle both API Standard and PREMIUM (Proprietary Steel Grade) casing connections which require higher torque. Available in a variety of models with hydraulic back-up tongs optional: “KMA", “KHT”, “TQ", “KJD”, “KD” and SE 16-25 with torques ranging from 15,000 ft-lbs up to 55,000 ft-lbs.

Are designed for quick and safe making up and breaking out of drill pipe and drill collars. Our “ZQ” series of hydraulic power drill pipe tongs are widely used in oil and gas drilling, in land and offshore operations around the world. The integrated torque tong and bucking tong eliminate the need for manual tongs and spinning chains, able to handle pipe from2-3/8” up to 8” drill collars, providing torques of up to 92,000 Lbs-Ft.

Find parts you need to repair or maintain your machines. At Alibaba.com, you can shop for hydraulic tubing power tong at affordable rates to tackle new obstacles and challenges. In the ever-changing industry, you can find what you need and speak to the supplier directly. Thanks to Alibaba’s collection of wholesale hydraulic tubing power tong you also get to buy these parts at lower prices, which means you can explore new levels every day more comfortably. From bulldozers to dragline excavators, wheel tractor scrapers to shotcrete machines, any part you need for a heavy-duty mining machinery; you can find it at Alibaba.com.

Looking for purpose-built machine parts? Find them at Alibaba.com. From new components to used parts straight from the manufacturers. Plus, if you need custom-made pieces, you can chat with the supplier, give specifications and wait on delivery. From stone crushers to excavator undercarriage parts, buckets, and even drill bits to get you through the rocks, the hydraulic tubing power tong from Alibaba offers you the chance to continue operating without a hitch. Whether you are looking to introduce concrete into the rock walls for more consistency and safety during mining, then hydraulic tubing power tong that goes at wholesale prices at Alibaba will be an excellent addition to your machinery.

Before buying a component, you’d want the equipment to suit your application and offer value. The list of hydraulic tubing power tong at Alibaba.com lets you dig into earth deposits, and the compare tool checks out other similar parts to give you the information you need to make a purchasing decision. You’ll get wholesale hydraulic tubing power tong that specializes in mining, with reinforced chassis, and run on more powerful engines. Whether you want to transport minerals or the workers to the mining site, introduce explosives or arms to help you remove materials from your mine pits, Alibaba.com has it all.

R.D.O.T is a small but ambitious Company specializing in Hydraulic Handling Tools. Our core business is the Sales, Supply & Service of Hydraulic Power Tongs.

GILL POWER TONGS TEDA POWER TONGS SHENLIDA POWER TONGS GILL POWER TONGS TEDA POWER TONGS SHENLIDA POWER TONGS GILL POWER TONGS TEDA P[OWER TONGS SHENLIDA POWER TONGS GILL POWER TONGS TEDA POWER TONGS SHENLIDA POWER TONGS GILL POWER TONGS TEDA POWER TONGS SHENLIDA POWER TONGS GILL POWER TONGS TEDA POWER TONGS SHENLIDA POWER TONGS GILL POWER TONGS TEDA POWER TONGS SHENLIDA POWER TONGS GILL POWER TONGS TEDA POWER TONGS SHENLIDA POWER TONGS GILL POWER TONGS TEDA POWER TONGS SHENLIDA POWER TONGS GILL POWER TONGS TEDA POWER TONGS SHENLIDA POWER TONGS GILL POWER TONGS TEDA POWER TONGS SHENLIDA POWER TONGS GILL POWER TONGS TEDA POWER TONGS SHENLIDA POWER TONGS GILL POWER TONGS TEDA POWER TONGS SHENLIDA POWER TONGS GILL POWER TONGS TEDA POWER TONGS SHENLIDA POWER TONGS GILL POWER TONGS TEDA POWER TONGS SHENLIDA POWER TONGS GILL POWER TONGS GILL

At R.D.O.T we are uniquely able to work on everything from Sucker Rod Tongs, the familiar 58-93R up to and including Snubbing and Casing Tongs. From a simple service to a complete custom Slant Rig Configuration R.D.O.T has the experience and skill to fulfill your requirements. Our in house test bench allows us to test up to 3500 psi @ 36 gallons a minute.

Casing Tongs: Casing power tongs are used to make or break casing tubulars placed in the drill hole in order to maintain the opening of the well. They come in a variety of sizes that measure anywhere from 5 ½ feet to 36 feet, and are designed to deal with lightweight, or high torque casing. Casing tongs are also available in a variety of models, with torques ranging from 15,000 to 200,000 foot-pounds. Consistent operations among the different models minimize the need for employee training.

Tubing Tongs: The main purpose of tubing power tongs is to run tubulars in order to extract oil and gas from reservoirs. Ruggedly designed, they provide steady, and reliable performance, even at higher torques. Like casing tongs, they also come in a variety of models depending on your torque specifications.

Drill Pipe Tongs: Drill pipe power tongs form drill strings by screwing together drill pipe, and industrial tubular used for drilling into the ground. These tongs are effective at lowering drill time, and reducing costs. Designed for safe, and quick make-up, they come in sizes 2.36 to 10 inches, and include a variety of models.

Riser Tongs: Risers are similar to pipelines in that they are conduits that move materials from the blowout preventer, located on the seafloor, to a drilling rig or floating production structure. Like flowlines, drilling risers transfer mud during the drilling stages while production risers carry over production materials, and hydrocarbons. Manufacturers of premium pipes have created threaded risers that are sealable, fatigue-resistant, and high-pressure– ideal for deep-water drilling.

Flush joint connections are used in numerous cases when running gravel pack screens. This makes it possible to shorten the length of the tong gripping portions between the screens. This change causes an increase in the productive area of the screens across the production zones in which long screen sections are run.

Expandable casing presents several issues for its make-up and running. Due to the deformity of the pipe from its original size, cautious and careful handling is required. Special tongs with jaws that can grip nonconventional diameters should be used for expandable casing. These tongs include false rotary tables and bowls, and slips for managing the inner strings.

Since power tongs are subject to heavy-duty use, and the maintenance requires a specialized workshop, your maintenance and repair provider should be able to assist you wherever, and whenever you need. Regular and consistent routines for maintenance, and spare parts are a must, and should be available as soon as possible to avoid downtime. Modern power tongs are high-end, sophisticated pieces of equipment that require a high level of expertise to operate, and repair. If you’re ever in need of patented Premiere casing, tubing, orcementing tools, contact the professionals at Premiere Inc. They have the services and products you’re looking for, as well as the expertise you need.

Our experienced and skilled power tong technicians play a major role in the safety and efficiency of a casing run. This makes the selection of your power tong service company a key component of overall performance.

ProTorque attracts and employs some of the industry’s most talented and experienced casing running technicians. Every detail of a casing run must be considered when looking for cost savings and efficiency; particularly on long production strings where every second counts while maintaining a safe operation. When making-up hundreds of connections, filling on the fly and selecting the correct handling equipment (air or hydraulic powered slips); we save time and effort on long challenging casing runs. ProTorque can meet handling requirements of up to 500 tons of hoist capability.

We are committed to delivering innovative designs and high performance powers tongs for the oil and gas industry. With 90% of all tong components manufactured and heat treated in-house, you are assured reliability and confidence on your next job with an Eckel tong!

Straight Tong Die Driver: Used for die slot redressing, the straight tong die driver is the simplest of type of rig tong. Though it is also the simplest type of rig tong to use, it is also the least safe of the three. Its handle and handguard protect hammer blows from falling onto the grip. Straight tong die drivers are lightweight—under eight pounds—and measure in at around 1”.

Angled Tong Die Driver: The angled tong die driver has a grip that’s angled away from the perpendicular tong as well as brass guards for the tong tip and handle, making this rig tong safer than the straight tong die driver. While this tong is safer, however, it’s actually harder to keep the angle tong die driver in place. This driver is similar in length to the straight tong die driver, but is about two pounds heavier, weighing in at over nine pounds.

Hammerless Tong Die Driver: This variety of tong die driver is made up of a hand pipe that can be used to apply pressure to the tong’s tip without using a hammer at all. This option is the safest of the three driver types because there’s no hammer required, it’s also the slowest driver for this same reason. The hammerless tong die driver is about as long and weighs as much as the straight tong die driver.

What oilfield tools does your operation need? Keystone Energy Tools has atool to fit your bill.Contact us today to learn more about how rig tongs can make your work environment safer, and to learn more our other oil and gas industry products.