2 3 8 inch 1 foot pup joint quotation

China J55, K55, N80, L80, P110 Pup Joint Factory Dervos Supplies J55, K55, N80, L80, P110 Pup Joint, 2 3/8 to 20IN, Length 0.61m, 0.91m, 1.22m, 1.83m.

China J55, K55, N80, L80, P110 Pup Joint Factory Dervos Supplies J55, K55, N80, L80, P110 Pup Joint, 2 3/8 to 20IN, Length 0.61m, 0.91m, 1.22m, 1.83m.

The pup joint is a commonly utilized fitting in industrial pipe connection. According to various connections, it can be normally divided into thread and flange types. The threaded type can be further categorized into two head external thread, single head external thread, and flat head external thread types. In addition, the item falls under tubing and casing types based upon various usages.

Compared with the tubing, it is simply different in length. We can produce a variety of flat end and external upset tubing pup joints with J, N, L, and other steel grades and different specifications.

These J55, L80, N80Q & P110 pup joints are manufactured from seamless Grade J-55, L80 N80Q and P110 mechanical tubing. The API 5CT tubing pup joint is mainly used to adjust the height of the tubing strings. It is also used to adjust the depth of down-hole tools.

We manufacture pup joints in all sizes, grades, and thread profiles to meet any requirement. Our tubing pup joints are manufactured out of seamless tubing and machined or upset to final dimensions. All API casing and tubing pup joints are manufactured according to API Spec 5CT. Special requirements are available on request.

A pup joint is Casing, Pipe or Tubing shorter in length than a standard tubular string. This allows for the adjustment and installation of tools and various tubular components when placement downhole is critical for a specific project. A Spacer Pipe is another reference used to identify pup joints. Pup joint features consist of connections, lengths, weights and material grade.

Crossover pup joints are manufactured from seamless mechanical tube. As with all Crossover products, each piece is marked with a distinctive job number and heat number that is fully traceable. A complete range of sizes (1" to 4.5"), weights (standard or heavy wall), and grades (J-55, N-80, L-80, and P-110) are commonly available from stock in 2", 3", 4", 6", 10", and 12" lengths. Lengths up to 20" are available upon request.

Seamless pup joints with premium connections are available in API and exotic alloy grades. Premium ends are threaded by the manufacturer or authorized licensee.

Available with standard or special perforation spacings. Each joint has four rows of ⅜ inch holes drilled longitudinally along the tube. Optional patterns, hole size, and lengths furnished upon request.

Crossover, Inc. handles many types of API Couplings. As a rule, we stock enough of your common couplings which enable us to ship the same day if needed. We carry in stock J-55, L-80, N-80, and P-110. As for sizes, we carry 2 3/8”, 2 7/8” 3 ½”, 4 ½” tubing and some of the casing sizes up to 13 3/8”. Stock connections are EU 8 Rd., Nu 10 Rd., LTC, STC, and BTC. Our couplings are primarily of USA manufacture. If origin is not important, we can source other origins and sometimes beat the USA manufactured cost.

A blast joint is shorter in length than standard tubular joint. Built with a heavy wall pipe it is incorporated in the production string to facilitate production across any perforated interval and zone. Blast Joints are manufactured to the following specs connections, lengths, weights and material grade.

Crossover Blast Joints are heavy wall pin by box connectors used in tubing strings and are designed to minimize the effect of external erosive action caused by production fluids. Blast joints are located opposite the location of perforations in the production casing or just below the tubing hanger in sand frac designs. Crossover blast joints are manufactured from seamless mechanical tube in sizes ranging from 2 3/8” to 4 1/2” OD. Any length, grade of material, and threading is available at the customers request. Typical lengths are 10" and 20". Both API and Premium threads are available.

Crossover Flow Couplings are heavy wall box by box connectors used in tubing strings and are designed to minimize the effect of internal erosive action caused by production fluids. Flow couplings are located just above or below Landing Nipples, Safety Valves or Control Devices where turbulent flow problems are likely to occur. Crossover flow couplings are manufactured from seamless mechanical tube in sizes ranging from 2 3/8” to 4 1/2” OD. Any length, grade of material, and threading is available at the customers request. Typical lengths are 3" and 6". Both API and Premium threads are available.

Crossover Coarse Thread Tubing Safety Joint provides for emergency recovery of the major portion of the tubing string should it become necessary to abandon the equipment below. Precision left-hand threads facilitate the release of the joint by right-hand tubing rotation. Equipment requiring right-hand rotation should not be used below the Safety joint.

Crossover Straight-Pull/Shear-Out Safety Joint is used between packers in dual and triple completions and in selective completions using Hydrostatic Single-String Packers. It is also used when rotational releasing is not desired. When ran above the upper packer in a single-string completion, however, the shear value should be adjusted to compensate for any hydraulic conditions that exist when the string is landed, or that are created by well treating operations. They are available in keyed and non-keyed configurations.

Crossover can build these in any of the regular API Grades such as J-55, L-80, or P-110. These are usually only made going up or down one size in either direction such as ¾” to 1” or 1 ½” to 2”.

Crossover Circulating Sub/Swages are manufactured from AISI 4140/4145. They typically are female hammer union on the top end and an IF pin on the bottom end, but can be manufactured with any size and style connection.

Crossover Drop Ball Circulating Subs are manufactured from AISI 4140/4145. The standard is pin by box. They are activated by dropping a chrome steel ball, which lands on a sleeve and as pressure increases, the pins in the sleeve are sheared. This causes the sleeve to move down and expose four ports in the side of the sub diverting the fluid flow.

Crossover Side Entry Subs are manufactured from AISI 4140/4145. They are manufactured from one piece. They are typically rotary shouldered pin by box with 2” 1502 female hammer union, but can be manufactured with any size and style connection.

The style shown is built from one piece of 4145M bar stock and the excess material milled away and then threaded. There are also Lift Caps which are Cast Steel Castings and are threaded with the correct thread, but the rest of the plug is casts to create the bail.

Some customers request Lift Caps with Pad Eye for lifting. These are also made out 4145M and can be manufactured to fit any of several shackles. They can be built with either the pin or the box facing down.

Crossover Inside BOP Valves are manufactured from AISI 4145. Crossover"s one piece design is much more robust than the traditional two piece construction design. Crossover"s one piece design typically allows for standard connection OD"s and shorter overall length parts. This eliminates the service break which allows for quicker disassembly.

Crossover rotary shoes are manufactured from specially tempered steel to provide the ultimate in toughness and durability. They are used to cut a clearance between the fish and the wall of the well bore. Each shoe is tailored to fit a particular downhole need and normally is run on the bottom of one or more joints of washover pipe. Shoe design is dictated by whether it cuts on the bottom, on the OD, on the ID, or any combination of these. When hole sizes permit, additional clearances can be cut using side ribs, thus providing greater circulation.

Pipe system involves various components, including tubing pup joint and are made from different materials. We offer wholesale tubing pup joint to create a smooth channel for the pipe systems in both commercial and residential areas.

A pup joint is Casing, Pipe or Tubing shorter in length than a standard tubular string. This allows for the adjustment and installation of tools and various tubular components when placement downhole is critical for a specific project. A Spacer Pipe is another reference used to identify pup joints. Pup joint features consist of connections, lengths, weights and material grade.

Pup Joints are manufactured from AISI 4145H or 4140H-modified alloy, heat-treated to Hardness range of 285-341 with a Charpy "V" notch minimum impact strength of 40 ft/lb at 70° F and one inch below the surface. Pup Joints are heat-treated to 110,000 PSI minimum yield. All connections are phosphate coated to impede galling during initial make-up.

Pup Joints are a mandatory part of equipment in almost any well. Due to their shorter length, they are typically easier to handle and to use. At the same time, they provide the same performance as the tubing/casing/drill pipe that they are attached to.

We are manufacturer and service provider of Civil Pup Joints. Short sections of well tubing made to American Petroleum Institute standards. Pup joints come in different lengths to make up a string of tubing of the proper length, from the bottom of the well to the tubing hanger in the wellhead. Made at the pipe mill under

Windlass manufactures Pup Joints with integral hammer lug union end connections. This enables faster, easier make-up and break-out of temporary flow lines.

Prithviraj Industries manufactures Pup Joints up to 20, 000 psi cold working pressure in sizes: 1, 11 /2, 2, 3, and 4-inch bore sizes, lengths to 20 feet.

- Grant Prideco pup joints are manufactured from the same material as our drill collars. Heat-treatment processes ensure a hardness range of 285-341 Brinell. Charpy V minimum impact strength of 40 ft-lb at 70° F are guaranteed one inch below the surface.

ADFO manufactures Pup Joints with Integral Hammer Union end connections.These Pup Joints are used on high pressure discharge lines, choke and kill lines, auxiliary flow and other applications.

PARVEEN offer seamless API Pup joints, manufactured to API spec. 5CT prime API Monogrammed seamless oil country tubing. Outside diameters, lengths & grades are available:

465, 467 & 485, Export Promotion Industrial Park Haryana State Industrial & Infrastructure Development Corporation, Export Promotion Industrial Park, Kundli - 131028, Dist.

BLAZE is adequately equipped to supply NPST Pup joints made of high quality seamless pipeline with  male & female detachable hammer union. NPST has uniform bore for greater flow capacity. NPST pup joints are available in 2″ to 4″ sizes, length for pup joint range from 1 feet to 20 feet at 15000 psi. Pup joint with Non- pressure seal thread union (NPST) are especially engineered for high pressure, abrasive services where welded connections are not desired. The design provides a strong, permanent end connection without butt welding. An epoxy thread-locking compound secures the connection.

Casing or Tubing Pup Joints, Casing or Tubing Connectors and Casing or Tubing Couplings. In addition it is capable of Threading items at Groups 1, 2, 3 & 4 of API spec. 5CT. Items supplied by BLAZE meet the Quality Standards as defined in API 5CT assuring

BLAZE is also well equipped to supply Line Pipe Couplings/ NPST pup joints with wide range of specifications. In addition we can supply thread Line Pipes and its accessories of various sizes. Items meet the quality standards as laid down in API – 5L.

Nr. SBI, Mamsa GIDC, Bhavnagar Survey No. 174, Plot No. 23,Mamsa-364070, TA-Ghogha, Dist. Bhavnagar (Guj.) India, Nr. SBI, Mamsa GIDC,, Bhavnagar - 364002, Dist. Bhavnagar, Gujarat

Gautam Budh Nagar Villa No 67, Lotus Villas Society, Opp Kc International School Jalpura Greater Noida, Gautam Budh Nagar - 201306, Dist. Gautam Budh Nagar, Uttar Pradesh

Vasai East, Vasai, Dist. Thane Gala No. 7, Bldg No. A, Swami Industrial Centre, Gaurai Pads, Vasai East, District Palghar, Vasai East, Vasai - 401208, Dist. Thane, Maharashtra

- Grant Prideco pup joints are manufactured from the same material as our drill collars. Heat-treatment processes ensure a hardness range of 285-341 Brinell. Charpy V minimum impact strength of 40 ft-lb at 70° F are guaranteed one inch below the surface.

Taluka Wada, Palghar, Dist. Thane Survey No. 23/1, 25/1, 25/2, Village Vasuri(Khurd), Behind Blue Star,, Taluka Wada, Palghar - 421312, Dist. Thane, Maharashtra

ADFO manufactures Pup Joints with Integral Hammer Union end connections.These Pup Joints are used on high pressure discharge lines, choke and kill lines, auxiliary flow and other applications.

Meerut Road Industrial Area, Ghaziabad C-23, Meerut Road Industrial Area, Meerut Road Industrial Area, Ghaziabad - 201003, Dist. Ghaziabad, Uttar Pradesh

Windlass manufactures Pup Joints with integral hammer lug union end connections. This enables faster, easier make-up and break-out of temporary flow lines.

Ashram Road, Ahmedabad Jivabhai Chamber, B/H. Ashram Road Police Chowk, Ashram Road Chowki, Ashram Road, Ashram Road, Ahmedabad - 380009, Dist. Ahmedabad, Gujarat

Shreeraj Industries offers NPST (Non-pressure Seal Thread) Pups in size 1-3 Fig 602 and 1502. The NPST connection offers a light weight pup capable of 6000-15000 CWP with a connection that isolates the thread from fluid’s flowpath. This connection is permanent and is well suited to abrasive applications where a weldedread more...

Oil Country Tubular Goods (OCTG) Pipes - are pipes used in wells in oil and gas industries consisting of casing, tubing, drill pipe, conductor pipe, couplings & pup joints, most of them are Seamless Steel Pipes.

Casing, is the structural retainer for the walls of oil and gas wells, Casing sizes from 4.5 to 20 inches O.D. inclusive, wall thickness from 5.21 mm to 15.88 mm.

Tubing, is used within the casing to convey the oil or gas to the ground surface, Tubing sizes from 1.050 to 4.5 inches O.D. inclusive, wall thickness from 3.18 mm to 10.54 mm.

Drill Pipe, is the seamless steel pipe used to drill the well by transmitting power to a rotary drilling tool from the surface to below ground level,the dirll pipes cover sizes form 2 3/8 to 6 5/8 inches O.D. inclusive, wall thickness from 6.88 mm to 12.7 mm.

Oil Country Tubular Goods (OCTG) Pipes are manufactured according to API (American Petroleum Institute, API SPEC 5CT, API 5DP) Specifications. also available to ISO 9001:2008.

China OCTG Casing Steel Pipemanufacturer Landee supplies API 5CT OCTG Casing Pipe, API SPEC 5CT, J55, K55, L80, N80Q, C90, C95, P110, Thread: BTC, STC, LTC.

China AISI 4138 Welding Sucker Rod Manufacturer Landee Offers AISI 4138 Welding Sucker Rod, API Spec 11B Grade C, 1-1/4 Inch, 8 Meters, Black Surface.

China Welding Sucker Rod Producer Landee Supplies Welding Sucker Rod Made of AISI 4720 Alloy Steel, API Spec 11B Gr.D, Black, Length 8 Meters, 3/4 Inch.

China AISI 4330 Oilfield Sucker Rod Producer Landee Provides AISI 4330 Steel Oilfield Sucker Rod, API Spec 11B Grade C, L 7.62 Meters, 7/8 Inch, Black.

China API 5CT Seamless Piping Manufacturer Landee Supplies API 5CT Seamless Piping, N80Q, Size 4-1/2 Inch, Ends Design EU/RD, Painted Surface Treatment.

China AISI 4145H Heavy Weight Drill Pipe Manufacturer Landee offers AISI 4145H Heavy Weight Drill Pipe, 127 * 9.3mm, NC50 Thread, 25.4mm Wall Thickness.

API 5CT J55 and K55 casing and tubing are relatively low grade material pipe among all API 5CT pipes, they have same chemical composition and same yield strength 379-552 Mpa but in different tensile, J55 tensile strength minimum 517 Mpa which K55 is 655 Mpa. J55/K55 are lower grade than N80, L80, P110 or T95, so they are a cheaper option material and widely used in non corrosive oil well installation without high strength requirement.

API 5CT defines delivery conditions for steel casing and tubing pipes used for oil wells installation, it covers pup joints, coupling stock, coupling material, and accessory materials, and establishes requirements for three product specification levels (PSL-1, PSL-2, and PSL-3). The requirements for PSL-1 are the basis of this standard.

PSL2: J55, K55 casing and tubing should be the full length normalized or normalized and tempered, if thickened, should be thickened after normalizing or normalizing and tempering.

Couplings: The J55 and K55 impact tests must be performed with a minimum transverse impact energy of 20 J for size specimens and 27 J for full-size specimens in the longitudinal direction.

J55/K55 PSL2: All grades pipes shall be inspected for the detection of longitudinal imperfections on the outside and inside surfaces to accepted by level L4 using one or more of the following methods:

For J55/K55 pipes, maximum permissible depth of linear imperfections, external and internal imperfections 12.5 of wall thickness. (Other grades H40, M65, N80 Type 1,  N80Q, L80, R95, P110 adopts same terms)

P110 Casing and Tubing Outer Diameter: 2-3/8”, 2-7/8”, 3-1/2”, 4-1/2”, 5-1/2”, 6-5/8”, 7”, 7-5/8”, 7-3/4”, 8-5/8”, 9-5/8”, 10-3/4”, 11-3/4”, 13-3/8”, 16”, 18-5/8”, 20”

With the help of a strong research and development team and long-term market research, we have developed original BS1387 ERW Welded Pipe, Oil Casing Pipe, ASTM A572 Fluid Pipe that meet the market demand and are loved by consumers. We actively extend the industrial chain in accordance with the principle of supporting and promoting the development of the main business. Our company implements a very strict code of conduct and accepts the supervision of friends and customers from all walks of life. Our company adheres to the business philosophy of "professional, honest, and trustworthy" to serve customers with better quality, lower cost, higher efficiency and more professional perspective. In the future development road, our company will continue to adhere to the quality of technology as the core competitiveness, high-quality products and sincere service as the foundation, to fully meet the needs of customers as its own responsibility, to make the enterprise bigger and stronger, to become a pioneer in the industry.

ll pump joints are made from modified alloy steel heat-treated to a Brinell Hardness range of 285–341 with a Charpy V-Notch minimum impact strength of 40 ft-lbs at 70°F guaranteed to one inch below the surface Connections can be cold rolled after machining, if requested All connections are phos-coated to prevent galling during initial make-up

API Spec 5CT – This Standard specifies the technical delivery conditions for steel pipes (casing, tubing and pup joints), coupling stock, coupling material and accessory material and establishes requirements for three Product Specification Levels (PSL-1, PSL-2, PSL-3). The requirements for PSL-1 are the basis of this Standard. The requirements that define different levels of standard technical requirements for PSL-2 and PSL-3, for all Grades except H-40, L-80 9Cr and C110, are contained in Annex H.

All kinds of Casing and Tubing Jfe Nsct Pup Joint for OCTG produced by our company have reached the national standards. We keep on with our enterprise spirit of "Quality, Efficiency, Innovation and Integrity". We hope to gain the trust and support of our customers, employees, communities and other stakeholders, and work together to make our company stronger, better and bigger.

Pup joints are manufactured from AISI 4145H or 4140H-modified alloy, heat-treated to a Brinell Hardness range of 285-341 with a Charpy “V” notch minimum impact strength of 40 ft/lb at 70° F and one inch below the surface. Pup joints are heat-treated to 110,000 psi minimum yield. All connections are phos-coated to impede galling during initial make-up. They are available in standard lengths of 5′, 10′, 15′ and 20′ with other configurations upon request.

Pup joints are commonly used to adjust the length of the drill string to the elevation of rotary table for easy surface handling and drilling practices. They undergo the same stresses as drill pipe and their performance depends primarily on their superior mechanical properties.