3 pup joint npst pricelist

BLAZE is adequately equipped to supply NPST Pup joints made of high quality seamless pipeline with  male & female detachable hammer union. NPST has uniform bore for greater flow capacity. NPST pup joints are available in 2″ to 4″ sizes, length for pup joint range from 1 feet to 20 feet at 15000 psi. Pup joint with Non- pressure seal thread union (NPST) are especially engineered for high pressure, abrasive services where welded connections are not desired. The design provides a strong, permanent end connection without butt welding. An epoxy thread-locking compound secures the connection.

Casing or Tubing Pup Joints, Casing or Tubing Connectors and Casing or Tubing Couplings. In addition it is capable of Threading items at Groups 1, 2, 3 & 4 of API spec. 5CT. Items supplied by BLAZE meet the Quality Standards as defined in API 5CT assuring

BLAZE is also well equipped to supply Line Pipe Couplings/ NPST pup joints with wide range of specifications. In addition we can supply thread Line Pipes and its accessories of various sizes. Items meet the quality standards as laid down in API – 5L.

Nr. SBI, Mamsa GIDC, Bhavnagar Survey No. 174, Plot No. 23,Mamsa-364070, TA-Ghogha, Dist. Bhavnagar (Guj.) India, Nr. SBI, Mamsa GIDC,, Bhavnagar - 364002, Dist. Bhavnagar, Gujarat

Gautam Budh Nagar Villa No 67, Lotus Villas Society, Opp Kc International School Jalpura Greater Noida, Gautam Budh Nagar - 201306, Dist. Gautam Budh Nagar, Uttar Pradesh

Prithviraj Industries manufactures Pup Joints up to 20, 000 psi cold working pressure in sizes: 1, 11 /2, 2, 3, and 4-inch bore sizes, lengths to 20 feet.

Windlass manufactures Pup Joints with integral hammer lug union end connections. This enables faster, easier make-up and break-out of temporary flow lines.

Taluka Wada, Palghar, Dist. Thane Survey No. 23/1, 25/1, 25/2, Village Vasuri(Khurd), Behind Blue Star,, Taluka Wada, Palghar - 421312, Dist. Thane, Maharashtra

Ashram Road, Ahmedabad Jivabhai Chamber, B/H. Ashram Road Police Chowk, Ashram Road Chowki, Ashram Road, Ashram Road, Ahmedabad - 380009, Dist. Ahmedabad, Gujarat

ADFO manufactures Pup Joints with Integral Hammer Union end connections.These Pup Joints are used on high pressure discharge lines, choke and kill lines, auxiliary flow and other applications.

Meerut Road Industrial Area, Ghaziabad C-23, Meerut Road Industrial Area, Meerut Road Industrial Area, Ghaziabad - 201003, Dist. Ghaziabad, Uttar Pradesh

- Grant Prideco pup joints are manufactured from the same material as our drill collars. Heat-treatment processes ensure a hardness range of 285-341 Brinell. Charpy V minimum impact strength of 40 ft-lb at 70° F are guaranteed one inch below the surface.

Seamless pup joints with premium connections are available in API and exotic alloy grades. Premium ends are threaded by the manufacturer or authorized licensee.

Available with standard or special perforation spacings. Each joint has four rows of ⅜ inch holes drilled longitudinally along the tube. Optional patterns, hole size, and lengths furnished upon request.

Upset forging is a process by which a plain end blank is upset at each end to increase the cross section area. We have innovated upsetting by automating our handling table. This automated handling table not only helps us upset at different lengths safely, but also helps us to get pup joints to the highest degree of consistency and accuracy.

The hydro tests all of its pup joints. This non-destructive test uses water pressure and a pressure recorder to determine possible leaks. Our modernized tester can be adjusted to accommodate various lengths of pup joints, and test them at various pressures as required by API and customer specifications.

We has a custom & automated Full Body Ultrasonic Inspection system to inspect its tubing pup joints. We are the first in the industry to build and use a Full Body Ultrasonic Inspection for pup joints to ensure there are no defects on the external and internal surface longitudinal and transverse.

This inspection has greater accuracy than other non destructive tests, one reason is its high penetrating power to allow detection of defects deep in the pup joints. The Full Body UT also has high sensitivity which allows it to detect exceptionally small deficiencies. This inspection ensures that our customers receive the best quality pup joints on the market.

We also manufacture pup joints by profiling from heavy wall mechanical tubing. Profiling of pup joints are done in a high precision and tolerance CNC in order for us to achieve a high level of dimensional tolerances and surface finish.

The wet magnetic particle test is a non-destructive test that detects surface and shallow subsurface defects. Pup joints are inspected for longitudinal and transverse defects using this inspection method.

We have exclusively designed a line which heat treats each pup joint individually. This setup is versatile and dynamic, as it can be adjusted for various lengths of pup joints and modified accordingly. This gives us the advantage of catering to the needs of our customers extremely quickly. All pup joints are re-straightened after heat treat to ensure the highest quality.

TSI Flow Products provides a wide range of Flowline and Pup Joints to the oil and gas industry. Available in sizes 2”, 3” and 4” in NACE and Non‐NACE configurations. NPST Pipes are available in Detachable and Non‐Detachable with a uniform bore in a variety of lengths up to 15,000 PSIG. Available with upgraded DC15 Connections as well.

40 FPS Size and Model ID (IN) FT3/MIN GPM BBL/MIN M3/MINSwivel Joints3/8" & 1/2" High Pressure 0.547 4 29 0.7 0.113/4" & 1" Low & High Pressure 1 13 98 2.33 0.371-1/4" High Pressure 1.375 25 185 4.41 0.71-1/4" & 1-1/2" Low Pressure and 1-1/2" High Pressure 1.5 29 220 5.25 0.831-1/2" HP10 1.593 33 249 5.92 0.941.5" LS-15, 2" LSG-15 & LS-20 1.3 22 165 3.94 0.632" LS-15 1.875 46 344 8.2 1.32" Low & High Pressure 2 52 392 9.33 1.482-1/2" High Pressure 2.5 82 612 14.6 2.323" LSG-10 & LS-15 2.75 99 741 17.6 2.83" High Pressure 2.968 115 863 20.5 3.272-1/2&3" Low Pressure, 3" LS-20 LSG-15 TSi-20 3 118 881 21 3.343" TSi-15, 3" TSi-10, 3" TSi-6 2.75 99 741 17.6 2.84" HP6, FS-4 3.438 155 1,157 27.6 4.384" HPTL, 4" TSi-15 3.5 160 1,200 28.6 4.544" LS-10 3.875 197 1,470 35 5.574" TSi-10 3.75 184 1,377 32.8 5.214" High Pressure 4 209 1,567 37.3 5.935" High Pressure 5.188 352 2,636 62.8 9.986" Low Pressure 6.083 484 3,624 86.3 13.728" Low Pressure 8 838 6,267 149 23.72Pup Joints1" 1502 Integral Pup Joint 0.875 10 75 1.79 0.281.5" 1502 Integral Pup Joint 1.3 22 165 3.94 0.632" 602, 1002, 1502 Integral Pup Joint 1.75 40 300 7.14 1.142" 2002, 2202 Integral Pup Joint 1.3 22 165 3.94 0.633" 602, 1002, 1502 Integral Pup Joint 2.75 99 741 17.6 2.83" 2002, 2202 Integral Pup Joint 3 118 881 21 3.344" 602, 1002 Integral Pup Joint 3.875 197 1,470 35 5.574" 1502 Integral Pup Joint 3.5 160 1,200 28.6 4.542" 602, 1002, 1502 NPST 1.75 40 300 7.14 1.143" 602, 1002, 1502 NPST 2.625 90 675 16.1 2.554" 602 NPST 3.75 184 1,377 32.8 5.214" 1002 NPST 3.5 160 1,200 28.6 4.544" 1502 NPST 3 118 881 21 3.34 Flow Rates at Maximum Recommended Velocity of 40 FPS Size and Model ID (IN) FT3/MIN GPM BBL/MIN M3/MINPlug Valves1" DR150, 1" ULT150 0.875 10 75 1.79 0.281-1/2" DR150 1.3 22 165 3.94 0.631"x2" DR150, 1"x2" ULT150 0.875 10 75 1.79 0.282" DR50 thru DR150 1.75 40 300 7.14 1.142" DR200 1.3 22 165 3.94 0.633" ULT150 2.75 99 741 17.6 2.83" ULT200 3 118 881 21 3.344" ULT100 3.875 197 1,470 35 5.574" ULT150 3.5 160 1,200 28.6 4.54Swing Check Valves1.5" 1502 1.3 22 165 3.94 0.632" 1502 1.75 40 300 7.14 1.142" 2002, 2202 1.3 22 165 3.94 0.633" 602, 1002, 1502 2.75 99 741 17.6 2.83" 2002, 2202 3 118 881 21 3.344" 1002 3.875 197 1,470 35 5.574" 1502 3.5 160 1,200 28.6 4.54

A pup joint is a casing or tubing of length shorter than Range 1 with the same thread connection, used to adjust the length of tubular strings to its exact requirement.

Pup Joints are manufactured from AISI 4145H or 4140H-modified alloy, heat-treated to a Brinell Hardness range of 285-341 with a Charpy “V” notch minimum impact strength of 40 ft/lb at 70° F and one inch below the surface. Pup Joints are heat-treated to 110,000 PSI minimum yield. All connections are phosphate coated to impede galling during initial make-up.

Integral Pup Joints dedicated to Sour Service applications are available. PJ -110 PUP S are Sour Service Pup Joint using ASCOWELL C material providing improved resistance to Sulfide Stress Cracking with high yield strength.

The report shows the total number of homicide victims in 2022 rising to 30 total, one year after 19 were reported. The largest jump came in the second quarter of 2022, when 11 homicides occurred.

Integral → The pup joints are one-piece construction made from alloy steel and feature wing union end connections that eliminate welds and threads. The pup joints are capable of handling a variety of fluids and a working pressure of 15,000 psi. Available in lengths up to 15 feet, they are pressure rated to 10,000 psi for sour gas service.

Flow iron pup joints from Cameron deliver maximum total lifecycle cost savings, even in the oil and gas industry’s most demanding applications. For all of your flow iron requirements, from high-stage-count hydraulic fracturing to cementing, well testing, and even abrasive flowback, you can count on Cameron for high reliability and low cost.

Cameron offers flow iron pup joints in standard 2- and 3-in sizes and lengths from 2 to 10 ft with 1502 hammer wing unions and nonpressure seal threads (NPST).