3 pup joint npst quotation

BLAZE is adequately equipped to supply NPST Pup joints made of high quality seamless pipeline with  male & female detachable hammer union. NPST has uniform bore for greater flow capacity. NPST pup joints are available in 2″ to 4″ sizes, length for pup joint range from 1 feet to 20 feet at 15000 psi. Pup joint with Non- pressure seal thread union (NPST) are especially engineered for high pressure, abrasive services where welded connections are not desired. The design provides a strong, permanent end connection without butt welding. An epoxy thread-locking compound secures the connection.

Casing or Tubing Pup Joints, Casing or Tubing Connectors and Casing or Tubing Couplings. In addition it is capable of Threading items at Groups 1, 2, 3 & 4 of API spec. 5CT. Items supplied by BLAZE meet the Quality Standards as defined in API 5CT assuring

BLAZE is also well equipped to supply Line Pipe Couplings/ NPST pup joints with wide range of specifications. In addition we can supply thread Line Pipes and its accessories of various sizes. Items meet the quality standards as laid down in API – 5L.

Integral → The pup joints are one-piece construction made from alloy steel and feature wing union end connections that eliminate welds and threads. The pup joints are capable of handling a variety of fluids and a working pressure of 15,000 psi. Available in lengths up to 15 feet, they are pressure rated to 10,000 psi for sour gas service.

PR can customize any length of the pup joint as our customer required. We provide tubing pup joint, casing pup joint available with NPST, Integral and Welded union end connections from 10,000 to 15,000 PSI NSCWP for standard and sour service. Available from 2" to 3" sizes, lengths for pup joints range from 1’ to 20’.

Our pup joints are used as interconnecting pipework between equipment. We offer various styles of pup joints to suit your needs or preference, including hammer forged (integral), fabricated (welded), API line pipe threaded, and NPST.

Integral pup joints can be made available with two models, one is plain integral pup joints, another is pup joints with retaining shoulder, integral pup joints with retention shoulder features specially machined shoulder to prevent nut from sliding down pup joints when held vertically

Nr. SBI, Mamsa GIDC, Bhavnagar Survey No. 174, Plot No. 23,Mamsa-364070, TA-Ghogha, Dist. Bhavnagar (Guj.) India, Nr. SBI, Mamsa GIDC,, Bhavnagar - 364002, Dist. Bhavnagar, Gujarat

Gautam Budh Nagar Villa No 67, Lotus Villas Society, Opp Kc International School Jalpura Greater Noida, Gautam Budh Nagar - 201306, Dist. Gautam Budh Nagar, Uttar Pradesh

Prithviraj Industries manufactures Pup Joints up to 20, 000 psi cold working pressure in sizes: 1, 11 /2, 2, 3, and 4-inch bore sizes, lengths to 20 feet.

Windlass manufactures Pup Joints with integral hammer lug union end connections. This enables faster, easier make-up and break-out of temporary flow lines.

Taluka Wada, Palghar, Dist. Thane Survey No. 23/1, 25/1, 25/2, Village Vasuri(Khurd), Behind Blue Star,, Taluka Wada, Palghar - 421312, Dist. Thane, Maharashtra

Ashram Road, Ahmedabad Jivabhai Chamber, B/H. Ashram Road Police Chowk, Ashram Road Chowki, Ashram Road, Ashram Road, Ahmedabad - 380009, Dist. Ahmedabad, Gujarat

ADFO manufactures Pup Joints with Integral Hammer Union end connections.These Pup Joints are used on high pressure discharge lines, choke and kill lines, auxiliary flow and other applications.

Meerut Road Industrial Area, Ghaziabad C-23, Meerut Road Industrial Area, Meerut Road Industrial Area, Ghaziabad - 201003, Dist. Ghaziabad, Uttar Pradesh

- Grant Prideco pup joints are manufactured from the same material as our drill collars. Heat-treatment processes ensure a hardness range of 285-341 Brinell. Charpy V minimum impact strength of 40 ft-lb at 70° F are guaranteed one inch below the surface.

We manufacture pup joints in all sizes, grades, and thread profiles to meet any requirement. Our tubing pup joints are manufactured out of seamless tubing and machined or upset to final dimensions. All API casing and tubing pup joints are manufactured according to API Spec 5CT. Special requirements are available on request.

VigorPetro Threaded pup Joints are available in 1" through 4" sizes with line pipe threads or non-pressure seal thread(NPST) in any critical lengths up to 20 feet with 602, 1002 or 1502 end connections.