api 5ct manual pup joint in stock

We manufacture pup joints in all sizes, grades, and thread profiles to meet any requirement. Our tubing pup joints are manufactured out of seamless tubing and machined or upset to final dimensions. All API casing and tubing pup joints are manufactured according to API Spec 5CT. Special requirements are available on request.

PUP JOINTS are a joint of pipe of non-standard length used to adjust the length of tubular strings to exact requirement. We provide both tubing (2 3/8” to 4”) and casing (4” to 13 3/8”) in all lengths. With our myriad of licenses (quality page) we are able to cut to length, thread and couple to meet specified needs. API casing and tubing pup joints are manufactured according to API Spec 5CT using prime API monogrammed, seamless oil country tubing. Premium pup joints are also available with premium connections and in API or exotic alloy grades.

MARKER JOINTS are a joint of tubing used in a workover or completion tubing string that serves as a position or depth indicator. In most cases, a marker joint is significantly shorter than other joints in the string so that it is easily noticeable.

Tejas Tubular de Mexio is committed to maintaining high quality products. In order to honor this commitment we have developed a quality assurance manual that describes our quality management system and how it conforms to the requirements of the American Petroleum Institute (API) Spec Q1. The API Specification Q1 outlines the requirements for the consistent and reliable production of parts manufactured in accordance with API specifications. An API license and authorization to monogram is issued only after a quality assurance manual has been submitted and approved and an onsite audit by an API representative has confirmed that the applicant adheres to the requirements of both Q1 and the appropriate API product specifications. Specification Q1 is consistent with the requirements of ISO 9000. While it is necessary to have a valid API license certificate to apply the API monogram, a manufacturer can produce products which meet API requirements without the license and mark the product only with the specification designation, for example �5CT� for casing or tubing. However many users require the use of the API monogram to insure that API is auditing the manufacturer on a regular basis.

The American Petroleum Institute has granted Tejas Tubular de Mexico the right to use the Official API Monogram� on manufactured products under the conditions in the official publications of the America Petroleum Institute entitled API Q1� and API Spec 5CT, API Spec 5L, API Spec 5DP and API Spec 7-1.

In this article, the last updated list of API & ISO standards for Tubulars (Casings, Tubings, Threads, Drill Pipe, Line Pipe) is presented. These standards can be considered as reference documents as well as a basis for training classes in the subject of Tubular Goods.

API RP 5A3/ISO 13678:2010 – Recommended Practice on Thread Compounds for Casing, Tubing, Line Pipe, and Drill Stem Elements (includes Errata 1 dated April 2011):

API RP 5A3 provides requirements, recommendations, and methods for the testing of thread compounds intended for use on threaded casing, tubing, and line pipe connections and for thread compounds intended for use on rotary shouldered connections. The tests outlined are used to evaluate the critical performance properties and physical and chemical characteristics of thread compounds under laboratory conditions.

API RP 5A5 specifies requirements and gives recommendations for field inspection and testing of oil country tubular goods (OCTG). This International Standard covers the practices and technology commonly used in field inspection;

Spec 5B covers dimensions and marking requirements for API Master thread gauges. Additional product threads and thread gauges, as well as instruments and methods for the inspection of threads for line pipe, round thread casing, buttress casing, and extreme-line casing connections, are included. It is applicable when so stipulated in the API standard governing the product. The inspection procedures for measurements of taper, lead, height, and angle of thread are applicable to threads having 111/2 or less turns per in. (111/2 or less turns per 25.4 mm). All thread dimensions shown without tolerances are related to the basis for connection design and are not subject to measurement to determine acceptance or rejection of product. Pages: 125.

This bulletin is not intended as a design manual. Its purpose is to provide minimum performance properties on which the design of casing, tubing, and drill pipe strings may be based.

The purpose of this bulletin is to show the formulas used in the calculation of the various pipe properties given in API standards, including background information regarding their development and use. This bulletin is under the jurisdiction of the Committee on Standardization of Tubular Goods.

API TR 5C3/ISO 10400:2007 – Technical Report on Equations and Calculations for Casing, Tubing, and Line Pipe used as Casing or Tubing; and Performance Properties Tables for Casing and Tubing (includes Addendum 1 dated October 2015):

API RP 5C5 establishes minimum design verification testing procedures and acceptance criteria for casing and tubing connections for the oil and natural gas industries. These physical tests are part of a design verification process and provide objective evidence that the connection conforms to the manufacturer’s claimed test load envelope and limit loads.

API RP 5C6 created to provide a standard industry practice for the shop or field welding of connectors to pipe. The technical content provides requirements for welding procedure qualification, welder performance qualification, materials, testing, production welding, and inspection. Additionally, suggestions for ordering are included. Pages: 7.

This standard specifies the technical delivery conditions for steel pipes (casing, tubing, and pup joints), coupling stock, coupling material, and accessory material and establishes requirements for three Product Specification Levels (PSL-1, PSL-2, PSL-3). The requirements for PSL-1 are the basis of this standard. The requirements that define different levels of standard technical requirements for PSL-2 and PSL-3, for all grades except H-40, L-80 9Cr, and C110, are contained in Annex H. This standard can also be applied to tubulars with connections not covered by API standards. This standard is not applicable to threading requirements. This standard is based on the 8th Edition of Spec 5CT. Pages: 269.

Spec 5DP specifies the technical delivery conditions for steel drill-pipes with upset pipe-body ends and weld-on tool joints for use in drilling and production operations in petroleum and natural gas industries for three product specification levels (PSL-1, PSL-2, and PSL-3). This International Standard covers the following grades of drill-pipe:

This International Standard can also be used for drill-pipe with tool joints not specified by ISO or API standards. This International Standard is based on Spec 5D and Spec 7.

Pup joint is kind of pipe without non-standard length to adjust the length of tubular strings to its exact requirement. API casing and tubing pup joint are produced according to API SPEC 5CT standard. Beyond the standard of oil casing pipe is called pup joint, the main oil casing pup joint material: J55, K55, N80, L80, C90, T95 and P110. Anson steel is a professional pup joint manufacturers in the steel line with good reputation.

Pup joint is kind of pipe without non-standard length to adjust the length of tubular strings to its exact requirement. API casing and tubing pup joint are produced according to API SPEC 5CT standard. Beyond the standard of oil casing pipe is called pup joint, the main oil casing pup joint material: J55, K55, N80, L80, C90, T95 and P110. Anson steel is a professional pup joint manufacturers in the steel line with good reputation.

Tube Supply stocks a variety of sizes in tubular form in these grade categories. All grades are in compliance with API 5CT mechanical and impact testing expectations, including ultrasonic testing.

  Casing or Tubing Pup Joints at Group 1, J55/PSL 1, K55/PSL 1, N80(1)/PSL 1;  Manufacture Accessories at Group 1, J55/PSL 1, K55/PSL 1, N80(1)/PSL 1;  Threader.

  Casing or Tubing Pup Joints at Group 1, J55/PSL 1, K55/PSL 1, N80(1)/PSL 1;  Manufacture Accessories at Group 1, J55/PSL 1, K55/PSL 1, N80(1)/PSL 1;  Threader.

API Spec 5CT Licensing Information Form, Product Removal, Changes and Additions under the API Monogram ProgramPlease be advised that the API Spec 5CT Licensing Information Form has been updated with changes that include product removal, product gradechanges, and product naming changes.Changes to the API Spec 5CT Licensing Information Form include:• • Group selections 1, 2, 3 and 4 have been removed

• • Product “Threader” is now product “Pipe Threader” 1-1. Licensees can transition to a registration under API Spec Q1. Facilities interested in the transition to API Spec Q1 certification shall apply prior to July 1, 2019. Applications can be submitted through the myCerts system (mycerts.api.org).

Joint ft in in in % in % Loss % Grade Damage^Descrjption 0 100

Joint ft in in in % in % Loss % Grade Damage Description 0 100