drill pipe pup joint specifications in stock

Pup Joints are joints of tubing or drill pipe that are reduced in length. Pup Joints can range anywhere from 2 feet to 25 feet. They are very similar to standard joints of drill pipe and tubing except in most cases they have a reduced inside diameter matching that of the tool joint inside diameter.

A pup joint is a casing or tubing of length shorter than Range 1 with the same thread connection, used to adjust the length of tubular strings to its exact requirement.

Pup Joints are manufactured from AISI 4145H or 4140H-modified alloy, heat-treated to a Brinell Hardness range of 285-341 with a Charpy “V” notch minimum impact strength of 40 ft/lb at 70° F and one inch below the surface. Pup Joints are heat-treated to 110,000 PSI minimum yield. All connections are phosphate coated to impede galling during initial make-up.

Integral Pup Joints dedicated to Sour Service applications are available. PJ -110 PUP S are Sour Service Pup Joint using ASCOWELL C material providing improved resistance to Sulfide Stress Cracking with high yield strength.

4” PUP JOINTPUP JOINT 4″ WITH NC40 (4 ” FH) CONNECTION, LENGTH 5 FEET, TOOL JOINT 5-3/8” OD X 2-7/16” ID, WITH TC2000 PLASTIC INTERNAL COATING C/W PRESS STEEL PROTECTORS ON BOTH ENDS

PUP JOINT 4″ WITH NC40 (4 ” FH) CONNECTION, LENGTH 10 FEET, TOOL JOINT 5-3/8” OD X 2-7/16” ID, WITH TC2000 PLASTIC INTERNAL COATING C/W PRESS STEEL PROTECTORS ON BOTH ENDS

PUP JOINT 4″ WITH NC40 (4 ” FH) CONNECTION, LENGTH 15 FEET, TOOL JOINT 5-3/8” OD X 2-7/16” ID, WITH TC2000 PLASTIC INTERNAL COATING C/W PRESS STEEL PROTECTORS ON BOTH ENDS

3 1/2″PUP JIONTPUP JOINT 3 1/2″ WITH NC38 ( 3-1/2″ IF) CONNECTION, LENGTH 5 FEET, TOOL JOINT 5” OD X 2-7/16” ID, C/W PRESS STEEL PROTECTORS ON BOTH ENDS

3 1/2″PUP JIONTPUP JOINT 3 1/2″ WITH NC38 ( 3-1/2″ IF) CONNECTION, LENGTH 15 FEET, TOOL JOINT 5” OD X 2-1/8” ID, C/W PRESS STEEL PROTECTORS ON BOTH ENDS

2 7/8″ G-105 PUP JIONTPUP JOINT 2 7/16″ WITH NC31 ( 2-7/8″ IF) CONNECTION, LENGTH 5 FEET, TOOL JOINT 4 1/8” OD X 2” ID, C/W PRESS STEEL PROTECTORS ON BOTH ENDS

2 7/8″ S-135 PUP JIONTS-135 PUP JOINT 2 7/8″ WITH NC31 ( 2-7/8″ IF) CONNECTION, LENGTH 5 FEET, TOOL JOINT 4 3/8” OD X 2” ID, C/W PRESS STEEL PROTECTORS ON BOTH ENDS

PUP JOINTPUP JOINT 3 1/2″ WITH NC38 ( 3-1/2″ IF) CONNECTION, LENGTH 5′,10′ 15’FEET(ONE EACH), TOOL JOINT 5” OD X 2-7/16” ID, C/W PRESS STEEL PROTECTORS ON BOTH ENDS;

PUP JOINT 2 3/8″ WITH NC26 ( 2-3/8″ IF) CONNECTION, LENGTH 5′,10′ 15’FEET(ONE EACH), TOOL JOINT 3 3/8” OD X 1-3/4” ID, C/W PRESS STEEL PROTECTORS ON BOTH ENDS

PUP JOINTS 3 ½”ODPUP JOINTS 3 ½”OD, 15.5 LB/FT, GRADEG105SS, NEW AND UNUSED,4 1/8”TOOLJOINTS (120 KSI) AND NC31 CONNECTION     5’LONG; FOR ABOVE PIPES

PUP JOINTS 2 7/8 ”ODPUP JOINTS 2 7/8 ”OD, 10.4  LB/FT, GRADEG105SS, NEW AND UNUSED,3 1/8”TOOLJOINTS (120 KSI) AND NC31 CONNECTION     5’   LONG; FOR ABOVE PIPES

One is a short Drill Pipe used to adjust the length of the Drill String; The other one OCTG Pup Joint is a pipe of non-standard length, which is used to adjust the length of tubular strings to its exact requirement.

Vigor can manufacture the Tubing Pup Joints by different technology - Upsetting and Machining process. if you have a special requirement on the Pup Joint production process, please just specify.

If you are looking for a competitive, high quality and fast delivery oilfield pup joint in stock, or if you are planning to buy pup joint API from one of the leading casing and tubing pup joint manufacturers, API 5CT pup joint in stock, l8013cr pup joint, nue/nue tubing pup joint manufacturers and suppliers China, please feel free to contact VIGOR.Details  of  API  Spec.  5CT  Oil  Tubing  Pup  Joint

A pup joint is Casing, Pipe or Tubing shorter in length than a standard tubular string. This allows for the adjustment and installation of tools and various tubular components when placement downhole is critical for a specific project. A Spacer Pipe is another reference used to identify pup joints. Pup joint features consist of connections, lengths, weights and material grade.

Integral Pup Joints dedicated to Sour Service applications are available. PJ -110 PUP S are Sour Service Pup Joint using ASCOWELL C material providing improved resistance to Sulfide Stress Cracking with high yield strength.

Find parts you need to repair or maintain your machines. At Alibaba.com, you can shop for pup joint drill pipe at affordable rates to tackle new obstacles and challenges. In the ever-changing industry, you can find what you need and speak to the supplier directly. Thanks to Alibaba’s collection of wholesale pup joint drill pipe you also get to buy these parts at lower prices, which means you can explore new levels every day more comfortably. From bulldozers to dragline excavators, wheel tractor scrapers to shotcrete machines, any part you need for a heavy-duty mining machinery; you can find it at Alibaba.com.

Looking for purpose-built machine parts? Find them at Alibaba.com. From new components to used parts straight from the manufacturers. Plus, if you need custom-made pieces, you can chat with the supplier, give specifications and wait on delivery. From stone crushers to excavator undercarriage parts, buckets, and even drill bits to get you through the rocks, the pup joint drill pipe from Alibaba offers you the chance to continue operating without a hitch. Whether you are looking to introduce concrete into the rock walls for more consistency and safety during mining, then pup joint drill pipe that goes at wholesale prices at Alibaba will be an excellent addition to your machinery.

Before buying a component, you’d want the equipment to suit your application and offer value. The list of pup joint drill pipe at Alibaba.com lets you dig into earth deposits, and the compare tool checks out other similar parts to give you the information you need to make a purchasing decision. You’ll get wholesale pup joint drill pipe that specializes in mining, with reinforced chassis, and run on more powerful engines. Whether you want to transport minerals or the workers to the mining site, introduce explosives or arms to help you remove materials from your mine pits, Alibaba.com has it all.

Drill pipe joint is an important connecting component of petroleum drilling pipe drill, which is widely used in oil drilling industry. The market demand is big, has broad prospects for development, Goldenman company with its unique perspective, to create a modern international joint industry as the goal, take on the hard road of entrepreneurship. In the increasingly competitive market economy situation, the courage to struggle and thrive.

The upset (thread-end finish) refers to the wall of the tool joint at the threaded connection. Drill pipe is offered with an internal upset (IU), an external upset (EU), or an internal-external upset (IEU).

IEU - In an internal-external upset thickness is increased along both the inside and outside walls of the pipe to compensate for the metal removed in threading.

Seamless pup joints with premium connections are available in API and exotic alloy grades. Premium ends are threaded by the manufacturer or authorized licensee.

Available with standard or special perforation spacings. Each joint has four rows of ⅜ inch holes drilled longitudinally along the tube. Optional patterns, hole size, and lengths furnished upon request.

Upset forging is a process by which a plain end blank is upset at each end to increase the cross section area. We have innovated upsetting by automating our handling table. This automated handling table not only helps us upset at different lengths safely, but also helps us to get pup joints to the highest degree of consistency and accuracy.

The hydro tests all of its pup joints. This non-destructive test uses water pressure and a pressure recorder to determine possible leaks. Our modernized tester can be adjusted to accommodate various lengths of pup joints, and test them at various pressures as required by API and customer specifications.

We has a custom & automated Full Body Ultrasonic Inspection system to inspect its tubing pup joints. We are the first in the industry to build and use a Full Body Ultrasonic Inspection for pup joints to ensure there are no defects on the external and internal surface longitudinal and transverse.

This inspection has greater accuracy than other non destructive tests, one reason is its high penetrating power to allow detection of defects deep in the pup joints. The Full Body UT also has high sensitivity which allows it to detect exceptionally small deficiencies. This inspection ensures that our customers receive the best quality pup joints on the market.

We also manufacture pup joints by profiling from heavy wall mechanical tubing. Profiling of pup joints are done in a high precision and tolerance CNC in order for us to achieve a high level of dimensional tolerances and surface finish.

The wet magnetic particle test is a non-destructive test that detects surface and shallow subsurface defects. Pup joints are inspected for longitudinal and transverse defects using this inspection method.

We have exclusively designed a line which heat treats each pup joint individually. This setup is versatile and dynamic, as it can be adjusted for various lengths of pup joints and modified accordingly. This gives us the advantage of catering to the needs of our customers extremely quickly. All pup joints are re-straightened after heat treat to ensure the highest quality.

Every step of production process is performed with the highest degree of accuracy to meet or exceed API Specifications as well as the Industry Standards.

It is a short drill pipe used to adjust the overall length of drill string. The surface of Drill Pipe Pup joint looks like a smaller version of joint of drill pipe.

The minimum yield strength of Drill Pipe Pup Joint is 120000 PSI, just like the Tool Joint of the Drill Pipe. We manufacture Drill Pipe Pup Joints of all sizes, grades, and thread profiles to meet any custom requirements.

All our products have passed the ISO certification and API certifications.We have become the reliable exporter of Drill Pipe Pup Joint in India. Our products are tested numerous times under technical guidance and are made from best quality material.

PUP JOINTS are a joint of pipe of non-standard length used to adjust the length of tubular strings to exact requirement. We provide both tubing (2 3/8” to 4”) and casing (4” to 13 3/8”) in all lengths. With our myriad of licenses (quality page) we are able to cut to length, thread and couple to meet specified needs. API casing and tubing pup joints are manufactured according to API Spec 5CT using prime API monogrammed, seamless oil country tubing. Premium pup joints are also available with premium connections and in API or exotic alloy grades.

MARKER JOINTS are a joint of tubing used in a workover or completion tubing string that serves as a position or depth indicator. In most cases, a marker joint is significantly shorter than other joints in the string so that it is easily noticeable.