fmc integral pup joint pricelist

APIIntegral Pup Joints are straight tubes/pipes with hammer union, thread, or flange connections on both ends, which have been widely used for transporting high pressure flow in fracturing manifold, cementing manifold, maintenance manifold and test manifold.

Qihang"s Integral Pup Joints are forged from premium alloy steel, handled by advanced metal melting and heat treatment technology. All of our pup joints are strictly desined, manufactured and tested according to API 16C, APIQ1 and NACE 0175, both pressure thread seal straight pipe and non-pressure thread seal pup joint are available.

Now there’s a new Lightweight Fittings family that is ideal for handling a complete range of well servicing fluids at cold working pressures to 20,000 psi. Available in 1- to 4-inch sizes, FMC fittings feature high-quality forged construction with integral Weco wing union end connections for a high-strength, high-integrity connection every time. Tees, elbows, crosses, wyes, and laterals can be combined to suit virtually any installation. Like other FMC flowline products, FMC’s Integral Fittings come with full material traceability and can be supplied with Charpy impact values.

FMC Integral Fittings can be used in combination with FMC Plug Valves to create manifolds for choke-and-kill, well testing, squeeze, flow back, and cementing applications. Unlimited manifold designs using FMC’s advanced ULT and world proven DR Plug Valves can be easily constructed. Because FMC’s new line of integral fittings are lighter and smaller, you save valuable weight and space regardless of manifold design.

BLAZE is adequately equipped to supply NPST Pup joints made of high quality seamless pipeline with  male & female detachable hammer union. NPST has uniform bore for greater flow capacity. NPST pup joints are available in 2″ to 4″ sizes, length for pup joint range from 1 feet to 20 feet at 15000 psi. Pup joint with Non- pressure seal thread union (NPST) are especially engineered for high pressure, abrasive services where welded connections are not desired. The design provides a strong, permanent end connection without butt welding. An epoxy thread-locking compound secures the connection.

Casing or Tubing Pup Joints, Casing or Tubing Connectors and Casing or Tubing Couplings. In addition it is capable of Threading items at Groups 1, 2, 3 & 4 of API spec. 5CT. Items supplied by BLAZE meet the Quality Standards as defined in API 5CT assuring

BLAZE is also well equipped to supply Line Pipe Couplings/ NPST pup joints with wide range of specifications. In addition we can supply thread Line Pipes and its accessories of various sizes. Items meet the quality standards as laid down in API – 5L.

We can provide 1″~4″ and 1000psi to 15000psi(7MPa to 105MPa) straight pipes. 1m, 1.5m, 2m, 2.5m, 2.8m long integral straight pipes are available. We also provide HP straight pipes with other sizes and pressure ratings as per customers’ requirements.

Pipe system involves various components, including pup joint manufacturers and are made from different materials. We offer wholesale pup joint manufacturers to create a smooth channel for the pipe systems in both commercial and residential areas.

FMC Sour Gas Equipmenthas been supplying reliable, field-proven sour gas equipment since 1970. Today, FMC is pursuing its commitment to you through improved designs, new materials, higher pressure ratings, and a rigorous new product research and development effort.

All Chiksan and Weco sour gas products meet or exceed NACE and API requirementsFMC began providing quality sour gas equipment long before the National Association of Corrosion Engineers (NACE) Standard MR-01-75 was written. Today, all Chiksan and Weco brand products for sour gas service meet or exceed NACE Standard MR-01-75 and the American Petroleum Institutes (API) Standard RP-14E.

Quality assurance second to noneBefore any Chiksan or Weco product for sour gas service reaches you, it goes through FMCs total quality assurance program. This rigid quality program approved by leading independent inspection organizations insures that all FMC sour gas products are manufactured and processed to the highest industry standards. The result: You get quality sour gas equipment that provides long life and dependable service every time.

Simple, positive identificationFor positive identification, all Chiksan and Weco sour gas products are stamped Sour Gas using low-stress dot stamping. FMC sour gas equipment is also painted with an olive green, zinc-chromate primer that is unique to sour gas products.

Widest selection in the oilfieldFMC offers you the most complete line of sour gas swivel joints, wing unions, and plug valves in the world. Other FMC products for sour gas service include Chiksan cementing and circulating hoses, Weco pup joints, fittings and adapters, Weco pressure relief valves, Weco check valves, and manifold assemblies.

Table of ContentsIntroduction ............................................................................................ 1 Weco Wing Unions .................................................................................. 2 Weco Plug Valves .................................................................................... 8 Chiksan Swivel Joints ........................................................................... 10 Weco Pup Joints .................................................................................... 12 Cementing & Circulating Hoses ........................................................... 13 Weco Integral Fittings & Adapters ....................................................... 14 Weco Pressure Relief Valve .................................................................. 16 Weco Check Valves ............................................................................... 16 FMC Manifolds ...................................................................................... 17 Warnings & Cautions ............................................................................ 18 How to Order ......................................................................................... 18 Terms & Conditions ............................................................................ IBC

Weco Plug Valves eco sour gas plug valves are reliable, quarter-turn valves designed for services to 15,000 psi cold working pressure. These rugged valves range in size from 1 to 3 inches and come with integral Weco wing union ends. The union ends add considerable strength to the connection, reduce turbulence, and minimize corrosion and stress concentration sites. Weco sour gas plug valves are available with manual, handwheel, and hydraulic actuators.

Complete in-line maintenanceWeco sour gas plug valves can be rebuilt in-line using standard tools. Repair kits are available. FMC uses special sour gas resistant O-rings and seals in all Weco plug valves and repair kits for sour gas service. Only genuine FMC replacement parts are recommended for use in FMC plug valves.

Two-piece floating plug/stemFMCs proprietary floating plug and stem uniformly distribute load against the downstream seat to improve sealing and reduce operating torque.

Features & BenefitsStreamlined bore minimizes flow restrictionsSmooth, round bore design minimizes turbulence and pressure drop. Longsweep swivel joints have extra-long radius elbows for even better flow characteristics.Primary packing

Patented, Snap-in ball racesBecause sour gas service requires specially heat-treated steel, Chiksan sour gas swivel joints use patented field replaceable snap-in ball races for extra strength, high load-bearing capacity, and low operating torque.

Leak detection portChiksan sour gas swivel joints have a leak-detection port between the primary packing and the secondary O-ring seal. If leakage past the primary packing should occur, it is forced through the port, signaling the need for packing replacement.A D C

Integral Weco wing union endsChiksan sour gas swivel joints come with integral Weco wing union end connections, eliminating welding and minimizing turbulence.B

Field repairableOnly occasional light greasing is required to keep Chiksan swivel joints on the job. If packing, bearings, snap-in races, or ball plugs should need replacing, easy-to-use field repair kits are available.A

Weco Pup Joints s lightweight, one-piece pup joints feature integral Weco wing union end connections. Available in lengths to 10 feet, Weco alloy-steel pup joints efficiently handle sour gas fluids at cold working pressures up to 15,000 psi.

Chiksan swivel jointsFMC all steel hoses feature Chiksan sour gas swivel joints which provide flexibility, absorb shock and vibration, and maximize flow characteristics.

Weco wing union connectionsWeco sour gas wing union end connections insure fast, pressure-tight make-up and break-out without threading, welding, or special connections.LSG-10 Longsweep (2 Style 50) Integral

Weco Adapters & Integral Fittings eco adapters and integral fittings are ideal for handling sour gas fluids at cold working pressures up to 15,000 psi. These proven products feature high-quality forged construction with integral Weco wing union end connections for a high-strength, highintegrity connection every time. Tees, elbows, crosses, wyes, and laterals can be combined to suit virtually any installation.

Weco Pressure Relief Valves eco Pressure Relief Valves for sour gas service are the automatic way to relieve pressure at preset system limits. These rugged, compact valves are available for cold working pressures up to 10,000 psi. The pressure relief valve comes in a 2-inch size with integral Weco wing union ends.

Weco Swing Check Valves equipment from high pressure fluids. These rugged valves seal against sour gas fluids up to 10,000 psi. They are available with or without a downstream vent (consult factory), and are available with integral Weco wing union ends. Consult factory for dimensions.

FMC Manifoldsoffers manifolds in materials, sizes, pressures, and temperature ratings for a complete range of sour gas oilfield applications. These rugged manifolds feature proven Chiksan and Weco fluid control sour gas components for unsurpassed reliability, fast make-up and break-out, and improved safety. Unlimited manifold designs using FMCs advanced ULT and DR Plug Valves are available. Manifold assemblies are available with various configurations and pressure ratings. Consult factory for prices.

Warnings & Safety Instructionscan not anticipate all of the situations a user may encounter while installing and using FMC products. Therefore, the user of FMC products MUST know and follow all applicable industry specifications on the safe installation and use of these products. Refer to FMC product catalogs, product brochures and installation, operating and maintenance manuals for additional product safety information or contact FMC at 800/772-8582.

WarningsFAILURE TO FOLLOW THESE WARNINGS COULD RESULT IN SERIOUS INJURY OR DEATH! 1. Do not mix or assemble components, parts or end connections with different pressure ratings. Mismatched parts may fail under pressure. 2. Do not use or substitute non FMC components or parts in FMC products and assemblies. 3. Do not strike, tighten or loosen pressurized components or connections. 4. Do not exceed the rated working pressure of the product. 5. Complete and proper make-up of components and connections is required to attain rated working pressure. 6. Do not use severely worn, eroded or corroded products. Contact FMC for more information on how to identify the limits of erosion and corrosion. 7. Follow safe practices when using products in overhead applications. Products not properly secured could fall. 8. Select only appropriate product and

materials for the intended service: Do not expose standard service products to sour gas fluids. (Refer to NACE MR0175.) Do not interchange sour gas components with standard service components. Use appropriate safety precautions when working with ferrous products in below freezing temperatures. Freezing temperatures lower the impact strength of ferrous materials. 9. Follow manufacturers instructions and Material Safety Data Sheet directions when using solvents. 10. Make certain that personnel and facilities are protected from residual hazardous fluids before disassembly of any product. 11. If any leakage is detected from FMC products, take them from service immediately to prevent potential damage and personal injury. SAFETY INSTRUCTIONS The applications of FMC products are in working environments where general personnel safety procedures and policies MUST be followed. Always use appropriate protective equipment in high pressure, extreme temperature or severe service applications.

FMC Corporation Fluid Control Division Web: www.fmcenergysystems.com Email: fluid_control@fmc.com Fluid Control Headquarters FMC Fluid Control 6677 North Gessner Road Houston, TX 77040 Phone: (1) 713/510-6800 Fax: (1) 713/510-6803 Manufacturing Facility FMC Fluid Control 2825 West Washington P.O. Box 1377 Stephenville, TX 76401 Toll Free: 800/772-8582 (U.S.) Phone: (1) 254/968-2181 Fax: (1) 254/968-5709 Eastern FMC Fluid Control 130 St. Nazaire Road Broussard, LA 70518 P.O. Box 3091 Lafayette, LA 70505 Phone: (1) 318/837-9263 Fax: (1) 318/837-5844 Western FMC Fluid Control 1675 Broadway, Suite 1800 Denver, CO 80202 Phone: (1) 303/623-4622 Fax: (1) 303/623-7347 West Texas FMC Fluid Control 3500 West County Road North Odessa, TX 79764 Phone: (1) 915/550-2084 FAX: (1) 915/366-8538

Scotland FMC Corporation (U.K.) Ltd. Fluid Control Wellington Road Industrial Park Wellington Circle Aberdeen AB12 3JG, Scotland Phone: 011 + 44 + 1224/898-555 Fax: 011 + 44 + 1224/249-460 Singapore FMC South East Asia Pte. Ltd. 149 Gul Circle Singapore 629605 Phone: 011 + 65/ 862-3659 Fax: 011 + 65/ 861-8251 United Arab Emirates FMC International S.A. Al Moosa Tower, 17th Floor Box 3228 Dubai, United Arab Emirates Phone: 011 + 971 + 4/310-948 Fax: 011 + 971 + 4/310-950 Mexico FMC Equipo Petrolero S.A. de C.V. Carretera a Buena Vista km. 2.8 Ranchera Miguel Hidalgo Villahermosa, Tabasco, Mexico Phone: 011 + 52 + 93/50-0123 Fax: 011 + 52 + 93/50-1661 Venezuela FMC Services and Supplies Occidente, S.A. Fluid Control Division Avenida Intercomunal Diagonal Carretera "L" Sector Los Morochas, #202 Cludad Ojeda Edo Zulia, Venezuela Phone: 011 + 58 + 65-26901 Fax: 011 + 58 + 65-23406

As per the variegated requirements of our clients, we are offering a broad range of Integral Pup Joints. Leakage proof, rugged construction and resistant to corrosion are features of offered pup joints. We use only best quality mild steel and alloy steel to make this joint. Known for its robustness, precision design and high performance, theseIntegral Pup Jointsare offered at market leading prices. Our entire array of products is precisely designed under the guidance of experienced quality controllers before final delivery.

"Oil country tubular goods pup joints, made of carbon or alloy steel, welded or seamless, heat-treated or not heat-treated, regardless of end finish, having an outside diameter from 2 3/8 inches to 4 1/2 inches (60.3 mm to 114.3 mm), in all grades, in lengths from 2 feet to 12 feet (61 cm to 366 cm) originating in/or exported from the People"s Republic of China."