fmc weco pup joint brands

Now there’s a new Lightweight Fittings family that is ideal for handling a complete range of well servicing fluids at cold working pressures to 20,000 psi. Available in 1- to 4-inch sizes, FMC fittings feature high-quality forged construction with integral Weco wing union end connections for a high-strength, high-integrity connection every time. Tees, elbows, crosses, wyes, and laterals can be combined to suit virtually any installation. Like other FMC flowline products, FMC’s Integral Fittings come with full material traceability and can be supplied with Charpy impact values.

FMC Integral Fittings can be used in combination with FMC Plug Valves to create manifolds for choke-and-kill, well testing, squeeze, flow back, and cementing applications. Unlimited manifold designs using FMC’s advanced ULT and world proven DR Plug Valves can be easily constructed. Because FMC’s new line of integral fittings are lighter and smaller, you save valuable weight and space regardless of manifold design.

All Chiksan and Weco sour gas products meet or exceed NACE and API requirements. FMC began providing quality sour gas long before the National Association of Corrosion Engineers (NACE) Standard MR-01-75 was written. Today, all Chiksan and Weco brand products for sour gas service meet or exceed NACE Standard MR-01-75 and the American Petroleum Institute’s (API) Standard RP-14E.

Weco wing unions are the most complete line of sour gas pipe connections available, ranging in sizes from 2-to 6-inches with cold working pressure to 15,000 psi. All Weco unions are color coded with an olive green, zinc-chromatic primer for quick identification. Material meets NACE MR-01-75, ASTM and AISI standards.

Weco sour gas plug valves are reliable, quarter-turn valves designed for services to 15,000 psi cold working pressure. These rigged valves range in size from 1 to 3 inches and come with integral Weco wing union ends. The union ends add considerable strength to connection, reduce turbulence, and minimize corrosion and stress concentration sites. Weco sour gas plug valves are available with manual, handwheel, and hydraulic actuators.

FMC’s lightweight, one-piece pup joints feature integral Weco wing union end connections. Available in lengths to 10 feet, Weco alloy-steel pup joints efficiently handle sour gas fluids at cold working pressures up to 15,000 psi.

Weco adapters and integral fittings are ideal for handling sour gas fluids at cold working pressures up to 15,000 psi. These proven products feature high-quality forged construction with integral Weco wing union end connections for a high-strength, high-integrity connection every time. Tees, elbows, crosses, wyes, and laterals can be combined to suit virtually any installation.

Weco Pressure Relief Valves for sour gas service are the automatic way to relieve pressure at preset system limits. These rugged, compact valves are available for cold working pressures up to 10,000 psi. The pressure relief valve comes in a 2-inch size with integral Weco wing union ends.

FMC’s patented flowline check valves are used to isolate well servicing equipment from high pressure fluids. These rugged valves seal against sour gas fluids up to 10,000 psi. They are available with or without a downstream vent (consult factory), and are available with integral Weco wing union ends.

Our company has injection molding machine, large milling machine, CNC lathe, machining and other processing equipment, is a production, research and development, sales in one of the scientic and technological enterprises. The main products of the company are high and low pressure Union, pneumatic tyre unions, telescopic Union, thrash, special union, flange type conversion by the union, the Union (oil pipe by welding, centralizer), a union joint, large diameter hose, fittings, oil seals, stainless steel joint union head, sucker rod centralizer, special oil screen, drilling hose, hose, fire hose, special low pressure hose, steel wire braided hose, metal hose, compensator, our products have high pressure,

Pup joints (flowline pipes) are pipe lines with thread, flange or union connectors on both ends, designed to be compatible with FMC Chiksan pup joints and SPM pup joints.Various pup joints are available for high/low pressure and temperature and H2S environment,such as integral pup joints( 10 feet length to handle fluids at cold working pressure), sour gas pup joints, pressure thread seal straight pipes and non-pressure thread seal pup joints.

Pup joints are forged from superior alloy steel with partial heat treating process, which are widely used for transporting high pressure flow in fracturing line, cementing line and NACE Service. Pup joints have been optimized for minimum weight and size to extend service life, easy to transport and install on site.

- Integral pup joints can be made available with two models, one is plain integral pup joints, another is pup joints with retaining shoulder, integral pup joints with retention shoulder features specially machined shoulder to prevent nut from sliding down pup joints when held vertically.

APIIntegral Pup Joints are straight tubes/pipes with hammer union, thread, or flange connections on both ends, which have been widely used for transporting high pressure flow in fracturing manifold, cementing manifold, maintenance manifold and test manifold.

Qihang"s Integral Pup Joints are forged from premium alloy steel, handled by advanced metal melting and heat treatment technology. All of our pup joints are strictly desined, manufactured and tested according to API 16C, APIQ1 and NACE 0175, both pressure thread seal straight pipe and non-pressure thread seal pup joint are available.

APIIntegral Pup Joints are straight tubes/pipes with hammer union, thread, or flange connections on both ends, which have been widely used for transporting high pressure flow in fracturing manifold, cementing manifold, maintenance manifold and test manifold.

Qihang"s Integral Pup Joints are forged from premium alloy steel, handled by advanced metal melting and heat treatment technology. All of our pup joints are strictly desined, manufactured and tested according to API 16C, APIQ1 and NACE 0175, both pressure thread seal straight pipe and non-pressure thread seal pup joint are available.

Now there’s a new Lightweight Fittings family that is ideal for handling a complete range of well servicing fluids at cold working pressures to 20,000 psi. Available in 1- to 4-inch sizes, FMC fittings feature high-quality forged construction with integral Weco wing union end connections for a high-strength, high-integrity connection every time. Tees, elbows, crosses, wyes, and laterals can be combined to suit virtually any installation. Like other FMC flowline products, FMC’s Integral Fittings come with full material traceability and can be supplied with Charpy impact values.

FMC Integral Fittings can be used in combination with FMC Plug Valves to create manifolds for choke-and-kill, well testing, squeeze, flow back, and cementing applications. Unlimited manifold designs using FMC’s advanced ULT and world proven DR Plug Valves can be easily constructed. Because FMC’s new line of integral fittings are lighter and smaller, you save valuable weight and space regardless of manifold design.

Weco ULT and DR plug valves are premium, quarter-turn valves designed for a wide range of standard and sour gas drilling, production, and well-servicing applications. These rugged valves are offered in single and dual-body designs in pressures to 20,000 psi. They range in size from 1 to 4-inches and come with threaded, Weco wing union, flanged, and clamp hub ends. Consult factory for configurations. Like all pressure containing products, Weco plug valves require special handling.

FMC offers the most complete line of standard service and sour gas wing unions with sizes ranging from 1- to 12-inches in diameter with working pressures up to 20,000 psi. Unions are available with line pipe or tubing threads, butt-weld, or nonpressure-thread seal end connections.Positive sealing designs

Weco unions are produced using the finest raw materials, tooling procedures, and heat-treating techniques available. Each union is carefully inspected to assure long, dependable service in the most extreme conditions.

Pup joint & flow line pipeis the most important equipment in oil gas industry and it is widely used for oil gas drilling, production, cementing, well testing, fracturing, water injection etc. Typical installation include wellhead Christmas tree, choke manifold, wellhead oil gas pipeline, sand filter, sand catcher etc.Our pup jointsare usually designed according to API6a standard, and absorb the technology of FMC Technip, Anson, NOV, SPM,etc .

Recently we have just completed a batch of api 6a weco hammer union pup joint flow line pipe for our customers in Thailand. The model size include 2”Fig1502 10000PSI,3”Fig206 2000psi,4”Fig206 2000psi, all end connection are interchangeable with FMC technology weco hammer union connection.

We are very good atweco hammer union pup joint, our pup joints have been sold to major oil companies and service companies all over the world, such as BP, Shell, Halliburton, Schlumberger, Weatherford, CNPC, CNOOC, Sinopec, GE, etc.

We have many specifications and models available as optional, all weco hammer union pup joint can also be customized according to customer requirements.

Keywords:well testing pup joints, ,api6a pup joint, wellhead pup joints, fracturing flowline treating iron, well test pup joint, production pup joints, weco hammer union pup joints,MPD flowline pup joints, acidizing pup joints flowline pipe, sand filter pup joints, wellhead Christmas tree pup joints, onshore offshore pup joints flowline pipe, subsea pup joints , flowback pup joints, cementing pup joints. Sand catcher pup joints, sand cyclone pup joints.weco hammer union flow line pipe.well testing flowline treating iron.