pup joint 1502 pricelist

BLAZE is adequately equipped to supply NPST Pup joints made of high quality seamless pipeline with  male & female detachable hammer union. NPST has uniform bore for greater flow capacity. NPST pup joints are available in 2″ to 4″ sizes, length for pup joint range from 1 feet to 20 feet at 15000 psi. Pup joint with Non- pressure seal thread union (NPST) are especially engineered for high pressure, abrasive services where welded connections are not desired. The design provides a strong, permanent end connection without butt welding. An epoxy thread-locking compound secures the connection.

Casing or Tubing Pup Joints, Casing or Tubing Connectors and Casing or Tubing Couplings. In addition it is capable of Threading items at Groups 1, 2, 3 & 4 of API spec. 5CT. Items supplied by BLAZE meet the Quality Standards as defined in API 5CT assuring

BLAZE is also well equipped to supply Line Pipe Couplings/ NPST pup joints with wide range of specifications. In addition we can supply thread Line Pipes and its accessories of various sizes. Items meet the quality standards as laid down in API – 5L.

APIIntegral Pup Joints are straight tubes/pipes with hammer union, thread, or flange connections on both ends, which have been widely used for transporting high pressure flow in fracturing manifold, cementing manifold, maintenance manifold and test manifold.

Qihang"s Integral Pup Joints are forged from premium alloy steel, handled by advanced metal melting and heat treatment technology. All of our pup joints are strictly desined, manufactured and tested according to API 16C, APIQ1 and NACE 0175, both pressure thread seal straight pipe and non-pressure thread seal pup joint are available.

Prithviraj Industries manufactures Pup Joints up to 20, 000 psi cold working pressure in sizes: 1, 11 /2, 2, 3, and 4-inch bore sizes, lengths to 20 feet.

Windlass manufactures Pup Joints with integral hammer lug union end connections. This enables faster, easier make-up and break-out of temporary flow lines.

- Grant Prideco pup joints are manufactured from the same material as our drill collars. Heat-treatment processes ensure a hardness range of 285-341 Brinell. Charpy V minimum impact strength of 40 ft-lb at 70° F are guaranteed one inch below the surface.

"Oil country tubular goods pup joints, made of carbon or alloy steel, welded or seamless, heat-treated or not heat-treated, regardless of end finish, having an outside diameter from 2 3/8 inches to 4 1/2 inches (60.3 mm to 114.3 mm), in all grades, in lengths from 2 feet to 12 feet (61 cm to 366 cm) originating in/or exported from the People"s Republic of China."

40 FPS Size and Model ID (IN) FT3/MIN GPM BBL/MIN M3/MINSwivel Joints3/8" & 1/2" High Pressure 0.547 4 29 0.7 0.113/4" & 1" Low & High Pressure 1 13 98 2.33 0.371-1/4" High Pressure 1.375 25 185 4.41 0.71-1/4" & 1-1/2" Low Pressure and 1-1/2" High Pressure 1.5 29 220 5.25 0.831-1/2" HP10 1.593 33 249 5.92 0.941.5" LS-15, 2" LSG-15 & LS-20 1.3 22 165 3.94 0.632" LS-15 1.875 46 344 8.2 1.32" Low & High Pressure 2 52 392 9.33 1.482-1/2" High Pressure 2.5 82 612 14.6 2.323" LSG-10 & LS-15 2.75 99 741 17.6 2.83" High Pressure 2.968 115 863 20.5 3.272-1/2&3" Low Pressure, 3" LS-20 LSG-15 TSi-20 3 118 881 21 3.343" TSi-15, 3" TSi-10, 3" TSi-6 2.75 99 741 17.6 2.84" HP6, FS-4 3.438 155 1,157 27.6 4.384" HPTL, 4" TSi-15 3.5 160 1,200 28.6 4.544" LS-10 3.875 197 1,470 35 5.574" TSi-10 3.75 184 1,377 32.8 5.214" High Pressure 4 209 1,567 37.3 5.935" High Pressure 5.188 352 2,636 62.8 9.986" Low Pressure 6.083 484 3,624 86.3 13.728" Low Pressure 8 838 6,267 149 23.72Pup Joints1" 1502 Integral Pup Joint 0.875 10 75 1.79 0.281.5" 1502 Integral Pup Joint 1.3 22 165 3.94 0.632" 602, 1002, 1502 Integral Pup Joint 1.75 40 300 7.14 1.142" 2002, 2202 Integral Pup Joint 1.3 22 165 3.94 0.633" 602, 1002, 1502 Integral Pup Joint 2.75 99 741 17.6 2.83" 2002, 2202 Integral Pup Joint 3 118 881 21 3.344" 602, 1002 Integral Pup Joint 3.875 197 1,470 35 5.574" 1502 Integral Pup Joint 3.5 160 1,200 28.6 4.542" 602, 1002, 1502 NPST 1.75 40 300 7.14 1.143" 602, 1002, 1502 NPST 2.625 90 675 16.1 2.554" 602 NPST 3.75 184 1,377 32.8 5.214" 1002 NPST 3.5 160 1,200 28.6 4.544" 1502 NPST 3 118 881 21 3.34 Flow Rates at Maximum Recommended Velocity of 40 FPS Size and Model ID (IN) FT3/MIN GPM BBL/MIN M3/MINPlug Valves1" DR150, 1" ULT150 0.875 10 75 1.79 0.281-1/2" DR150 1.3 22 165 3.94 0.631"x2" DR150, 1"x2" ULT150 0.875 10 75 1.79 0.282" DR50 thru DR150 1.75 40 300 7.14 1.142" DR200 1.3 22 165 3.94 0.633" ULT150 2.75 99 741 17.6 2.83" ULT200 3 118 881 21 3.344" ULT100 3.875 197 1,470 35 5.574" ULT150 3.5 160 1,200 28.6 4.54Swing Check Valves1.5" 1502 1.3 22 165 3.94 0.632" 1502 1.75 40 300 7.14 1.142" 2002, 2202 1.3 22 165 3.94 0.633" 602, 1002, 1502 2.75 99 741 17.6 2.83" 2002, 2202 3 118 881 21 3.344" 1002 3.875 197 1,470 35 5.574" 1502 3.5 160 1,200 28.6 4.54