rongsheng glass nigeria limited manufacturer

RONGSHENG GLASS NIGERIA LIMITED was incorporated in EDO, Nigeria with Registration Number 1342279. It was registered on 15 Jun 2016 and it"s current status is unknown. Company"s registered office address is WARD 8 UTESI COMMUNITY BENIN CITY.

We produce and sell float glass of different colors and sizes and dimension. We have in stock clear float glass, dark green, dark blue reflective, dark blue tinted, dark bronze reflective, dark bronze tinted, dark grey reflective, dark grey tinted, etc. Thickness 3mm - 12mm. Maximum size: 3300mm x 2250mm.

This is the profile page of Rongsheng Glass Nigeria Limited on Manpower Nigeria. This page contains the email, contact phone number, address, website and other contact information of Rongsheng Glass Nigeria Limited.

Nigeria Glass Group is registered in 2016,and is the greatest manufacturer in its own range in the Western Africa, which producing different kinds of glass through float process with thickness range of 3mm to 12mm.

We have two production line ,Which capacity is each 450tons & 600tons per day .which are the most advanced production line equipment to produce high quality clear float glass, tinted glass and on-line reflective glass. With the highest quality made this company capable to produce grade A and products for mirror and tempering glass.It meet the varying demand of the domestic and global market.

Tempered glass is a type of safety glass. It is processed by controlled thermal or chemical treatments to increase its strength compared with normal glass. Tempering puts the outer surfaces into conpression and the inner surfaces into tension. Such stresses cause the glass, when broken, to crumble into small granular chunks, The granular chunks are less likely to cause injury. As a result of its safety and strength, it has a high ability of pressure resistance, heat-resistance,and shock resistance.

Toughened glass can be made from annealed glass via a thermal tempering process. The glass is placed onto a roller table, taking it through a furnace that heats it well above its transition temperature. The glass is then rapidly cooled with forced air drafts while the inner portion remains free to flow for a short time. During the cooling process, the surface is faster in cooling and solidifying than inner side of the glass,and when the inner side continues its cooling shrinkage, the tension stress comes up to increase the strength and heat-resistance of the glass.