rotary table drilling rig for sale

Rotary Tables - 37-1/2 IN. ROTARIES, FG-2A, 500 TON, 14 IN. - 2-3/8 IN. PIPE SIZES USE FOR TRIPPING AND CASING RUNNING. OPTIONAL HPCD AVAILABLE. ALL FG SERIES TOOLS ARE HYDRAULICALLY ACT... More Info

Rotary Tables - 49-1/2 IN. ROTARIES, FG-3A, 750/500 TON, 20 IN. - 2-3/8 IN. PIPE SIZES USE FOR TRIPPING AND CASING RUNNING. OPTIONAL HPCD AVAILABLE. ALL FG SERIES TOOLS ARE HYDRAULICALLY... More Info

Rotary Tables - DEN-CON 49-1/2 IN. HMB BUSHING, 750 TON RATING, AVAILABLE WITH A VARIETY OF INSERT BOWLS INCLUDING CONVENTIONAL API BOWLS, 500 TON BOWLS AND 750 TON BOWLS. More Info

Rotary Tables - 37-1/2 IN. - 49-1/2 IN. ROTARIES, FG-6B, 350 TON, 8-5/8 IN. & SMALLER WORKOVER RISER. PURPOSE BUILT POWER SLIP FOR HANDLING WORKOVER RISER WITH UMBILICALS. IDEAL FOR RENT... More Info

Rotary Tables - POWER SLIPS ARE AVAILABLE FOR 27-1/2 IN., 37-1/2 IN. & 49-1/2 IN. ROTARY TABLES. RATED CAPACITIES FROM 350 TONS TO 750 TONS. 27-1/2 IN. ROTARIES, FG-5A, 350 TON, 9-5/8 IN... More Info

Rotary Tables - ADAPTER RINGS - 750 TON - SOLID & SPLIT RINGS - DEN-CON 60-1/2 IN. X 49-1/2 IN. ADAPTER RINGS. ADAPTER RING OUTSIDE CONFIGURATION AND INSIDE CONFIGURATION CAN BE DONE FOR... More Info

Rotary Tables - ADAPTER RINGS - 750 TON - SOLID & SPLIT RINGS - DEN-CON 49-1/2 IN. X 37-1/2 IN. ADAPTER RINGS. ADAPTER RING OUTSIDE CONFIGURATION AND INSIDE CONFIGURATION CAN BE DONE FOR... More Info

Explore the various rotary table oil rig products available for wholesale at Alibaba.com. Get a rotary table oil rig for drilling water wells, water exploration holes, geological exploration, coal mines, and other kinds of mining. Some rotary table oil rig options use caterpillar tread to move. Others use rubber tires, while others require a separate means of transport. Caterpillar tread propulsion can climb up to 25 degrees inclination. Some products in the range are capable of drilling over 200 meters, while others are only used for open-pit mining with depths of around 3 meters. Drilling can be done vertically downwards, horizontally, or in a slanting direction. Drilling speed depends on the power of the machine and the general hardness of the surface. The hole diameter can vary from 90mm to 200mm.

rotary table oil rig options also include an air compressor, a mud pump, drilling rods of various sizes, connectors, and a drilling tower. Drilling is done using drill bits of various shapes, sizes, and compositions. You can choose between diamond bits, alloy ring-shaped bits, 3-wing alloy bits, PDC bits, and hammer bits. Each drill bit uses different drilling methods, including rotary, percussion, blast hole, and core drilling.

Smaller products have a lifting power of around 25 kilonewtons and weigh about 2,500kgs. They’re ideal for small-scale drillings such as farms and homes. Larger ones are faster with more power, making them ideal for commercial use. Browse through Alibaba.com and find a rotary table oil rig that’s ideal for your work scope. Buy mine drilling rigs for your wholesale business at competitive prices. Chinese wholesalers provide you with customization options and great after-sales services.

A rotary table drilling rig is generally more powerful and can deeper depths drilling than a rotary table drilling rig. It rotates table drilling rig, in the form of a rotary table drilling rig, and the other variations of drilled are as distinct as a rotary table drilling rig. deeper depths are needed to drill deeper depths than a rotary table drill.

Both rotary and drilling tables are typically used in the form of rotary table drilling rig, because the rotary table drilling rig is both portable and non-volatile because of the chemicalsactions that are required for a drill. A rotary table drilling rig is both used to drill and distill water at the surface of a rock. rotary table drilling tables are typically used in the form of a rotary table drilling rig, as they are not used in any form of drilling rig, because the rotary table drilling rig is both used andically for non-flammable purposes,

There are two types of table drilling rig, depending on the type of client and the end product needed. A rotary table drilling rig is also called a rotary table drilling rig, depending on the type of client ands surface.

This website is using a security service to protect itself from online attacks. The action you just performed triggered the security solution. There are several actions that could trigger this block including submitting a certain word or phrase, a SQL command or malformed data.

Please call NDS for all of your rotary table needs, whether it may be for repairs or for new sales.  We stock a wide variety of parts for the Gardner Denver 503 5-1/4″ rotary table, the 603 5-1/4″ rotary table with bottom ring gear, the 603 5-1/4″ rotary table with top ring gear, the 7-1/2″ 2003 rotary table with bottom ring gear, the 7-1/2″ 2003 rotary table with top ring gear, the 10″ 3003 rotary table, the 5-1/4″ GEFCO rotary table, the 7-1/2″ GEFCO rotary table, 7-1/2″ Mayhew table for a Failing Rig, 8-1/2″ Speedstar table, 8-1/2″ Mayhew Table for a Speedstar rig and the 8-1/2″ Midway rotary table.   Portadrill, Mayhew, Failing and Midway rotary tables and parts are also available.

Welcome to Pickett Oilfield’s rotary tables web page. Our company has been in the oil & gas drilling equipment industry for over 38 years, supplying new and used rotary tables and rotary equipment to customers in practically every producing region in the world. We are here to serve all your drilling equipment needs – if you don’t see it on this site, just give us a call or email. We can get it, if you need it!

Pickett Oilfield, LLC offers prospective buyers and extensive selection of quality new and used oil & gas drilling equipment, including rotary tables to choose from at competitive prices. Browse our inventory of rotary tables and rotary table drilling components for sale at competitive rates.

580 GD Compressor, 5 X 6 Mud Pump, PTO, NO Deck Engine. Rig Was Rebuilt In 2010, New 23" Kelly, New Little Giant Swivel, 2000 Rotary Table, Transfer Case Rebuilt, New 100 Pulldown Chain & New Sprockets, Bowie Inj. Pump, Hyd. Oil Cooler, New Railing On Derrick For Swivel Drives, Mud Pit, 200" Of 2 More Info »

256S2 Leroi Compressor, 5 X 6 GD Mud Pump, PTO, NO Deck Engine. Tophead Drive, Retractable Table, Aux. Lift Line, Sandline, Three Part Main Line, (3) Hyd. Jacks, Weldco Beales Casing Hammer Package Available At Additional Cost. Mounted On 79 4-Axle CCC W/ 290 Cummins. Good Condition.

7 1/2 X 10 G/D Mud Pump, Waukesha Diesel Deck Engine. 32" Mast, 8" Retractable Table, 20" Opening In Table, 23" Kelly, Easy Set-Up Screw Jacks. Mounted On Single Axle Trailer. Good Condition.

5 X 6 Mud Pump, PTO, NO Deck Engine. 3 Speed Stationary Rotary Table, Water End On Pump Needs Gone Through, 23" Kelly, 200" Of Drill Pipe, Drawdown Not In Operation But Can Be Used, 2 Speed Rearend In Truck. Mounted On GMC, w/ V671 Detroit. Good Condition.

471 Detroit Deck Engine. 58" Derrick, 35" X 4" Kelly, Double Drum Drawworks Rebuilt In 2010, Drilling Platform & Side Walk Ways W/ Guard Rails, 7 1/2" Rotary Table Rebuilt In 2011, Air Clutches, Front & Rear Leveling Jacks, Derrick Lifting Cylinders Rebuilt In 2010, Rebuilt Driveline W/ New Clutch Pads In 2010, Deck Engine More Info »

256S2 Leroi Compressor, 5 X 6 GD Mud Pump, 318 Detroit Deck Engine. 10" Retractable Table, Rod Rack, 37" Derrick, (3) Hyd. Jacks, New Kelly Bar, Hydro-Frac Pump, 5 Speed Rotary Transmission, Cable Drawworks, 9 GPM Bean Water Injection Mud Pit, 500" Of 4 1/2" X 2 7/8" IF Drill Pipe, 20K LB. Front Axle, More Info »

Parco 131" X 550,000 Static Hook Load Mast, OIME SL-5 Drawworks W/ (2) 520 HP Cat Engines, Allison 606L Transmission, WPT 4-24 Water Brake, Parco 18.5" Split Level Substructure, 10X30" Doghouse, (2) Weatherford MP9 Triplex Mud Pumps W/ 398 Cat Engine, (2) 5X6 Centrifugal Chase Pumps, 2 Pit 900 Barrel Mud System, 27 1/2" Rotary More Info »

500/125 Compressor, 671 Detroit Deck Engine. 46" Mast, 33 1/2" X 4 1/2" Kelly Bar, 7 1/2" Stationary Table, Rod Box, Leveling Jacks, Work Platform. 5 Speed Transmission To Slow Down Drawworks. Mounted On 1978 Ford 900, w/ 534 Gas.

Mission Mud Pump, 8 Cyl. Diesel Deck Engine. Tophead Drive Machine, Runs 10" Drill Pipe, Rig Is Straight, Will Need Minor Repairs From Sitting, Includes 300" Of Drill Pipe, Extra Deck Engine. Mounted On 1989 Ford L7000, w/ Diesel. Good Condition.

5 1/2 X 8 Mud Pump, PTO, NO Deck Engine. Range II Derrick, Double Drum, 8" Retractable Table, Centrifugal Charge Pump, Hyd. Rod Spinner, Hyd. Chain Pulldown, Air Clutches, Weight Indicator, Racking Board, 25 Ton Block, Service Winch, Cathead, (4) Hyd. Jacks, (2) New Front Jacks, Mud Pump Rebuilt, Gearboxes Rebuilt, Includes 3 6" Drill More Info »

350 Cummins Deck Engine. 31" Brakes, Jaw Clutches, Hydrostatic Rotary Table, Drawworks Rebuilt, Cathead, Set Of Tongs, No Derrick. Mounted On Trailer.

5 X 6 Mud Pump, PTO, NO Deck Engine. Retractable Rotary Table, Chain Pulldown, (3) Hyd. Jacks, Rod Rack, Manual Clutches, Mounted On 1977 Ford, w/ Diesel.

GD Compressor, 5 X 6 Mud Pump, PTO, NO Deck Engine. Manual Clutches, 7 1/2" Stationary Table, Rod Rack, Pulldown, (2) Hyd. Jacks, 200" Of 2 7/8" Drill Pipe, Mounted On 1991 Mack, w/ Mack Diesel. Good Condition.

5 X 6 Mud Pump, PTO, NO Deck Engine. (4) Hyd. Jacks, Hyd. Pulldown, Rebuilt 5 1/4" Rotary Table, Rebuilt Drawworks, Sandline, Rod Rack, Manual Clutches, 260" Of 20" Drill Pipe, Mud Pump Fluid End Just Rebuilt. Mounted On 1988 Chevrolet, w/ 3208 Cat. Good Condition.

53" Mast, No Mud Or Air On Board, 7 1/2" Retract Table, Hyd. Pulldown, Sandline, 4 1/4" X 23" Kelly, Rod Rack, (3) Hyd. Jacks. Tooling Available, Mounted On 1979 Kenworth, w/ 6V92 Detroit. Good Condition.

4 Cyl. Cummins Turbo Diesel Deck Engine. 46" Derrick, 7 1/2" Rotary Table, 42" X 3" Fluted Kelly, Air Clutches, Swivel Chain Pulldown, Sandline, King Gooseneck & Swivel, (2) 4 Line Failing 2500 Traveling Blocks, 4 Sheave Crown Block, Hyd. Leveling Jacks, 360 Gallon Fuel Tank, 4 Speed Rotary Table Trans., Drillers Skid & Controls. More Info »

500/125 Compressor, 5 X 6 Air Mud Pump, 6V71 Detroit Deck Engine. Deck Engine Rebuilt 4 Years Ago, (3) Hyd. Jacks, Tophead Drive Rig, Rod Rack, Mechanical Clutches, Includes 250" of 3 1/2" X 15" Drill Pipe, Stabilizer And Mud Pan. Mounted On 1974 CCC, w/ RD450 Gas. Good Condition.

500/250 Leroi Compressor, 5 X 6 Mud Pump. (3) Hydraulic Leveling Jacks, 5 1/4" Retractable Rotary Table, Double Drum Drawworks W/ Mechanical Clutches, Rod Rack, 23" x 3 3/8" Kelly, Hydraulic Pulldown, Little Giant Swivel, 200" Of Drill Pipe. Mounted On 1978 Ford, w/ Diesel. Good Condition.

Cameron rotary tables range from 27 1/2 in to 60 1/2 in and feature a large oil capacity that adds to the unit"s durability. The rotary table includes a forged-steel fabricated housing and a heat-treated forged-steel turntable. Each rotary table is supplied with spiral-bevel, induction-hardened gears and two independent ratchet-type locks, with lever access from the top to lock the table in position.

This website is using a security service to protect itself from online attacks. The action you just performed triggered the security solution. There are several actions that could trigger this block including submitting a certain word or phrase, a SQL command or malformed data.

This website is using a security service to protect itself from online attacks. The action you just performed triggered the security solution. There are several actions that could trigger this block including submitting a certain word or phrase, a SQL command or malformed data.

Rotary table drive, Gardner Denver 5 x 6 FG-41 mud pump, Ingersoll Rand Type 40 air cooled air compressor, munted on 1979 GMC Brigadier J9500 tandem axle truck, 30’ x 9’ x 11’ (10’ with Kelly and lights removed)  Price:  $41,000

Manufactured 1975, double drum, refurbished, air compressor (PTO), 5-1/2 x 8 mud pump, mounted on 1975 International with 6 cyl Detroit diesel engine, 38"9" derrick, 3 lines to hook, 3" swivel (reduced to 2" mud hose), 3-1/2" fluted kelly, 5 ½" stationary table, pipe rack, no pipe available  Price:  $87,500

5 x 6 mud pump, stationary table, 4”  kelly, mounted on 1979 International truck with diesel engine, PTO, pipe racks, 4 hyd leveling jacks, 200’ drill pipe, needs new gearbox  Price:  $62,500

Detroit 671 diesel deck engine, no mud, no air compressor, retractable table, 26’ square Kelly (can run 33’ casing), mounted on 1981 GMC Brigadier with Cat 3208 engine, pipe racks (holds approx. 500’), hydraulic breakout, hydraulic pulldown, air clutches, 3 leveling jacks, 900’ drill pipe, 22’ 3-axle trailer, (2) 4-1/2” x 20’ drill collars, (1) 5-1/2” x 30’ drill collar, misc change overs and pick up plugs  Price:$54,500

Manufactured 1976, 750/250 air compressor, 10” retractable rotary table, Little Giant swivel, mounted on 4 axle Crane Carrier, 400 Big Cam engine (5000 hours), 1000’ of 3-1/2” x 20’ drill pipe (fits on rig)  Price: $117,500

Manufactured 1974, complete rebuild, 5 x 8 high pressure mud pump, 54’ derrick, 7-1/2” retractable rotary table (rebuilt 2018), Cummins 290 on deck, kelly bushing has been replaced, 290 Cummins deck engine, air clutches, wet clutch on main drive replaced, no air compressor, mounted on 4 axle Crane Carrier with 315 Cummins engine, 10 speed transmission, new clutch, tires 90%.  Includes 340’ of 4-1/2” x 20’ drill pipe, 6” stabilizer, 5” stabilizer, new tires (90%), brakes, clutches and bearings have been replaced  Price:  $215,000

Manufactured 1978, PTO, mounted on CCC with diesel engine, (2) 5 x 8 mud pumps, 3 x 4 Mission mud pump, 10" retractable rotary table, 4" fluted Kelly, no air, 4 hydraulic leveling jacks, no pipe available   Price Reduced:$165,000

Manufactured 1977, DSM drawworks, 5-1/2 x 8 mud pump, 10" table, WEJ air compressor, pulldown, mounted on 4 axle Crane Carrier, 400 Cummins engine, derrick extension with board, excellent tires, rod box,  300" of 20" (2-3/8 IF) drill pipePRICE REDUCED: $137,500

Manufactured 1977, Cummins 400 Big Cam 3 engine (less than 300 hours since in frame), 5-1/2 x 8 Gardner Denver mud pump, Gardner Denver WEJ 750/250 air compressor with blower, 52" x 100,000# 4-line derrick, 2500" racking board, hydraulic power tongs range 2-3/8 – 4-1/2, mounted on 4 axle Crane Carrier, 4 cylinder Bean mist pump, hydraulic hydramatic trip hold back, hydraulic kelly hold back, 4-1/2" square kelly with kelly cock, 10" Gardner Denver rotary table, swabbing drum with 2000" cable.

Manufactured 1978, 5-1/2 x 10 Gardner Denver mud pump, no air compressor, 10" retractable table, mounted on 1977 Autocar with 350 Cummins engine, PTO, air clutches, 58" extended mast, 4-1/2" x 24" kelly (smaller kelly available), piep rack, breakout tongs, racking boards, chain pulldown, 5 hyd levelng jacks   Price: $165,000

GARDNER DENVER 14W DRILL RIG(Ref#13060Ra)  Manufactured 1973, 650/250 air compressor, Gardner Denver 5 x 6 mud pump, air clutches, 10” retractable table, 40’ mast,  4-1/2” x 25’ kelly, mounted on tandem axle Crane Carrier with 375 hp Cummins engine, 13 speed transmission, 3 leveling jacks, rod box, pipe racking stand, 210’ of 4-1/2” x 15’ drill pipe, running condition, does 65 mph Price:  $74,500

Gardner Denver 5 x 6 mud pump, big air compressor, retractable table, mounted on 1991 International 4800 truck with diesel engine, approx. 193,000 miles  Price:  $110,000

Gardner Denver mud pump, stationary table, 2-7/8" kelly, mounted on 1977International truck, approx. 300’ 2-7/8" drill pipe, 7-7/8" & 9-1/4" bits, running condition  Price:$62,500

GARDNER DENVER 1000HD(Ref#15652T)  Manufactured 1979, 5 x 6 Failing mud pump, Leroi developmental air compressor, 23’ fluted kelly, 7-1/2” retractable Speedstar table, hydraulic pulldown, air over hydraulic clutches, pipe rack, breakout wrench, mounted on International truck with DT466 engine, 3 hyd jacks, 300’ of 20’ pipe

Manufactured 1957, 5 x 6 Gardner Denver mud pump (new gear end and fluid end), 7-1/2” retractable table, 24’ kelly, 35’ mast, chain pulldown with hydraulic motor, mounted on 1973 Diamond Reo double frame, 290 Cummins engine, 8 speed transmission, engine and transmission new, 2 rear and 1 front leveling jacks, 300’ of 2-3/8” drill pipe, mud pan, 2 bits, ready to work, new cables   Price:  $62,500

MAYHEW 1000(Ref#11322T)  Mounted on 1994 Ford truck, Cat engine, 7-1/2” table, 5 x 6 Gardner Denver mud pump, 23’ kelly, 2” swivel, hydraulic pulldown, water injection pump, 3 leveling jacks  Price:  $60,000

MAYHEW 1000(Ref#8472T)  Set up for drilling and workover, 4” square kelly, stationary table, mounted on 1974 International Lodestar, 5 x 6 Gardner Denver mud pump, no rod box, breakout tongs,  400’ of 2-3/8” x 20’ drill pipe, 10” surface bit, (2) 4” drill collars, 11 new button bits, 3 axle pipe trailer   Price:  $44,500

GARDNER DENVER 1000(Ref#13496T)  Manufactured 1979, 5 x 6 mud pump, 200 cfm air compressor, 5-1/2" retractable table, 3-3/4" x 23" fluted kelly, hydraulic pulldown, mechanical clutches, pipe rack, pipe wrench, mounted on 1979 Ford 9000 truck with Detroit 6V92, 4 hyd jacks, drills daily  Price:  $112,500

MAYHEW 1000(Ref#891Ta)  Manufactured 1978, 5 x 6 Gardner Denver mud pump, Gardner Denver air compressor, 5-1/4" stationary table, mounted on 1997 International truck with Cummins engine, 10 speed transmission, 30" mast, 25" kelly, chain pulldown, 2 rear leveling jacks, 300" of 2-7/8" IF drill pipe  Price:  $79,500

MAYHEW 1000(Ref#891T)  5 x 6 Gardner Denver mud pump, IR air compressor, 7-1/2" Mayhew rotary table, 30" mast, 25" kelly, chain pulldown, air clutch, mounted on 1996 Ford LT9000 truck with Cummins engine, 2 rear jacks, 300" drill pipe  Price:  $89,500

Air compressor, 5 x 6 mud pump, 23" kelly, 7-1/2" rotary table, mounted on 1996 International truck with Cummins 350 hp engine, 300" of 2-7/8" OD with 2-3/8 IF drill pipe, air clutches  Price:  $90,000

5 x 6 Garnder Denver mud pump, Gardner Denver air compressor, 5-1/4" stationary rotary table, mounted on 1997 Ford L9000 truck with Cummins 350 hp diesel engine, chain pulldown, 23" kelly, new brakes, new drums, new kelly bushings  Price:  $75,000

mounted on Rio 6x6 with Cat 3306 rebuilt engine, Fuller 10 speed transmission, Gardner Denver 5 x 6 mud pump, Leroi 100s air compressor, 2000 stationary table, 3 ½" x 23" Kelly, water injection pump, 500 gallon water tank, hydraulic pulldown, mechanical clutches, breakout wrench, 2 rear hydraulic leveling jacks, 200 of 2 7/8" x 20" drill pipe and International

Completely refurbished 2010, derrick needs a little work, Mission Magnum Sandmaster 4 x 3 x 13 mud rotary pump, mounted on 1998 Mack CH613, completely with 2-3/8 pipe and various bits  Price:  $167,500

PTO, mounted on 1971 White Constructor with 290 Cummins engine, 6 x 6 Wheatley mud pump, 580 CFM air compressor, custom made 42’ mast, 36’ Kelly, stationary table, mechanical clutches, pulldown, 1 front 2 rear hydraulic leveling jacks, no breakout wrench, no pipe or tools available  Price:  $42,500

Manufactured 1970, PTO, mounted on 1970 Chevy with gas engine, 5 x 6 Gardner Denver mud pump, 185 CFM on board air compressor with John Deere diesel engine, spudding arm, 5-1/4" stationary table, hydraulic pulldown, 3 hydraulic leveling jacks, 23" Kelly, 210" of 2 3/8" x 15" drill pipe, stabilizer    PRICE REDUCED:  $32,500

5" stationary table, 4 x 5 Gardner Denver mud pump, developmental air compressor, 4" square kelly, hydraulic pulldown, mechanical clutches, mounted on 1990 GMC Kodiak truck with Cat 3208 engine, 3 hyd leveling jacks, pipe rack, 220" of 2-7/8" x 15" drill pipe  Price:  $49,500

Manufactured 1974, diesel rig engine (blown head gasket, needs work), mounted on Ford F600 truck with 390 gas engine, 3 leveling jacks, 600’ of 2-3/8” x 10’ drill pipe, no pulldown (can put back), truck does not run, sitting a while  Price:  $13,000

Short wheel base, runs 15" pipe, 5-1/4 table, winch, 400/200 air compressor, 8 gpm water injection, mounted on Peterbilt 330 truck with Cat 3126E engine, RT8709B transmission, drill pipe, mud pit PRICE: $97,500

SPEEDSTAR 135(Ref#3612T)  (2) 5 x 6 Gardner Denver mud pump, 7-1/2" rotary table, chain pulldown, 7 speed transmission, 466 engine (210 hp), 1991 International truck, 4 leveling jacks  Price:  $95,000

SPEEDSTAR SS-135 DRILL RIG(Ref#11810Ta)  Manufactured 1976, 5-1/2 x 8 mud pump, 8-1/2” DSM retractable table, mounted on 1994 Ford LN9000 truck with Cat 3306 engine, breakout wrench, rod box, 4 hyd leveling jacks, tools, 1000’ of 20’ 3-1/2” flush wall drill pipe, ready to work  Price:  $112,500

290 cfm air compressor, John Deere deck engine for compressor, 8-1/2” retractable table, hydraulic pulldown, 5 x 6 Gardner Denvermud pump, mechanical clutches, mounted on tandem axle 1997 International 9400 truck with DT466 engine, approx 500’ rods, some tools, good condition, ready to go  Price:$102,500

SPEEDSTAR 135SS DRILLING RIG PACKAGE(Ref#14196T)  Manufactured 1969, mounted on 1998 International 4900 truck, 9 speed transmission, tires 90%, PTO, 7-1/2” retractable rotary table, kelly/swivel, 2 rear hydraulic jacks, 5 x 10 Gaso 300 gpm mud pump (gear end 95%)

Manufactured 1974, Gardner Denver WEJ 1009 air compressor with second stage cooling, Gardner Denver FG-FXF 5 x 6 mud pump, mounted on 1974 Crane Carrier with 8V71N diesel engine (motor refurbished), less than 10,000 miles, PTO, air line lubricator, water injection pump, double drum drawworks, single line pull 15,000#, friction clutches, large brakes, sandreel drum 8000# capacity, 8-1/2” retractable rotary table, pulldown, 2” pitch feed chains, 35’ heavy duty derrick, 4-1/4” x 24’ round kelly bar, 2” water swivel, pipe rack  Price:  $143,000

Available at extra cost:  Stabilizers, subs, assorted drill bits, 6” 8” and 10” hammers, 200’ drill rods on rig, 1000’ of 4-1/2” X 15’ drill rods, fishing tools

Manufactured 1983, 5-1/2 x 8 Gardner Denver mud pump, low pressure piston air compressor (compressor is 2 stage but only the low is working now), mounted on International 4700 with diesel engine, PTO, 11” retractable table, no rod box or pipe rack, some 3-1/2” x 20’ bottleneck pipe included  Price:  $72,500

Manufactured 1971, 4-1/2" x 22" kelly, 8-1/2" retractable table, 256 LeRoi 525/250 air compressor, 3 drums, mounted on International truck with 8V71 Detroit engine, PTO, rod box, 300" of 4-1/2" x 15" drill pipe, 200" of 4-1/2" x 20" drill pipe, 15" drill collar with 6" hammer, stored inside, last drilled July 2021  Price:  $83,500

Gardner Denver 5 x 8 FXX172 mud pump, air compressor, 9" retractable table, 40" mast, pulldown, mounted on 1977 Crane Carrier, Cummins 855 diesel engine, 3 hyd leveling jacks, drill pipe  Price:$115,000

Manufactured 1977, PTO, mounted on 1977 CCC with 290 Cummins engine, 3x4 centrifugal mud pump, Leroi 500/100 air compressor, 8-1/2" retractable table, 4-1/4" x 23" kelly, breakout wrench, pipe rack, 1 front & 2 rear hydraulic leveling jacks, 300" of 4-1/2" x 20" drill pipe, needs new truck  Price:  $39,500

Manufactured 1976, Mounted on CCC with diesel engine, PTO, 8-1/2” retractable table, sandreel, line oiler, breakout wrench, 4” x 23’ kelly, chain pulldown, mechanical clutches, pipe rack, compressor available but removed, sitting since 2020 but running when parked  Price: $137,500

SPEEDSTAR 1500(Ref#3153T)  500/250 air compressor, no mud pump, rotary table, mounted on Mack truck with diesel engine, PTO, front wheel assist, rod rack, 700’ drill pipe Price:  $72,500

Manufactured 1979, mounted on International Paystar 5000 with 350 Big Cam Cummins engine, PTO, centrifugal mud pump, pipe rack, 3-1/2IF 20’ drill pipe, currently drilling.  Also includes unounted Gardner Denver 5-1/2 x 8 mud pump  Price:  $144,500

750/125-250 air compressor, 7” retractable table, Little Giant swivel, 400’ of 2-7/8 flush joint pipe, mounted on 3 axle Peterbilt, 6V71 Detroit  Price:  $110,000

Manufactured 1989, PTO, mounted on 1981 International with Cummins engine, 4x3 centrifugal mud pump, 900 CFM air compressor, hydraulic pulldown, mechanical clutches, 4-1/2" retractable table, 3-1/4" x 25" Kelly, chain pulldown, 3 hydraulic leveling jacks, rod box, portable mud pit, 200" of 3-1/2" IF x 15" drill pipe Price:  $115,000

Manufactured 1980"s, Gardner Denver 5 x 6 mud pump, chain pulldown, 4-1/2" kelly, 8-1/2" retractable table, Mounted on 1983 Peterbilt truck with Cummins 350 engine, PTO, 2 rear and 2 front levelng jacks, 800" of 2-7/8" drill pipe  Price:  $122,500

1500 retractable table, 2-3/8" kelly, mechanical clutches, 5 x 6 Gardner Denver mud pumps, mounted on 1978 I6000 truck, Cat diesel engine, needs work (fluid ends needs rebuildeing, needs new hydraulic banks) Price:  $49,000 PRICE REDUCED: $34,500

1500 drawworks, PTO, mounted on 1996 International 4700 4x2 truck with DT466 engine, (2) drilling pumps:  Failing L100 800 max test pressure, 350 max working pressure and Gardner Denver FFFXFM 148.5 gpm, 639 max pressure, retractable table, mechanical clutches, hydraulic pulldown, 2 3/8” Kelly, 1 front & 2 rear hydraulic leveling jacks  Price:  $38,500

FAILING 1500(Ref#7758T)  8” retractable table, Ford gas deck engine, mounted on 10 wheeler with gas engine, 3 hyd leveling jacks, no rod box or pipe rack, incluees 390’ of FEDP pipe, 14” bit  Price:  $19,500

Manufactured 1966, 5-1/2 x 8 mud pump, mounted on 1972 Brockway 10 wheeler  truck with 781 Detroit diesel, PTO, 23’ kelly, 8-1/2” rotary table, breakout table, mechanical pulldown, mechanical clutches, hydraulic quills, 3 jacks    PRICE:  $64,000

Manufactured 1964, 5 x 6 mud pump, 2-3/8” kelly bar, 20” table (opens to 22”), heavy duty mast, 2 winches w/15” clutch, hydraulic pulldown, mounted on 1964 International truck, PTO, double plated frame, 304 International engine, needs minor repairs

Manufactured 1988, no mud pump, no air compressor, 6-1/2” inner diameter / 11” outdoor diameter retractable rotary table, 3-1/2” x 21’ kelly, mechanical chain pulldown, mechanical clutches, rod box, sandline, mounted on 1988 International FSeries 6 x 4 truck with DT466 gas engine, Eaton 10 speed tranmission, 200’ of 2-3/8” drill rod, truck and rig is operatable but could use some work, 3 leveling jacks  Price:  $41,500

Manufactured 1980, 5-1/2 x 8” Gardner Denver duplex pump, 23’ kelly, chain pulldown, air clutches, breakout wrench, 5-5/8” retractable rotary table, derrick 34’ from table to crown, mounted on 2005 Kenworth T300, 3 hydraulic leveling jacks, 260’ of 2-7/8” x 20’ drill pipe, roller and drag bits, very good condition, currently drilling  Price:  $137,500

Manufactured 1979, 5 x 6 Gardner Denver mud pump, Leroi 50S2 air compressor for drilling, 8" retractable table, 3-3/8" x 23"6"" kelly, 31"6" heavy duty mast, pulldown, mechanical clutches, Myers water injection, mounted on GMC Brigadier truck with 3208 Cat engine, 3 hydraulic leveling jacks, 500" , 3-5/8 x 15" drill pipe, bits, subs, good condition

Manufactured 1974, LeRoi 50S2 air compressor, 5 x 6 mud pump, 5-1/4" retractable table, 3-3/8" fluted kelly, 3 hydraulic leveling jacks, pulldown, mechanical clutches, breakout wrench, mounted on 1974 International tandem axle truck with Detroit 8V71 diesel engine (overhauled less than 1000 hours), 200" of 2-7/8" x 20" drill pipe Price:  $77,500

Manufactured 1973, 5 x 6 mud pump, 8” rotary table, 2-3/8” kelly, mounted on 1966 Kaiser Military 5 x 5 10-wheel truck with 6 cyl diesel engine, 200’ of 2-3/8” drill pipe, truck in fair condition  Price:  $49,000

5 x 6 mud pump, Leroi 50SD air compressor, 5-1/2” retractable table, chain pulldown, mechanical clutches, mounted on Ford truck, PTO, breakout wrench, rod box, approx. 300’ of 3” x 30’ (2-3/8 IF) drill pipe  Price:  $62,500

FAILING 1250 HOLEMASTER(Ref#796T)  Manufactured 1988, 5 x 6 Failing mud pump, (extra 5 x 6 pump included), 85 cfm Atlas Copco air compressor (can be remounted as an auxiliary compressor), 2” diaphragm mud pump, 7-1/2” retractable table, capable of drilling o 16”, mounted on 1988 International truck with DT466 (235 hp) engine, engine rebuilt 2012 with only 4000 hours), 10 speed transmission, 360’ drill pipe, tooling, 4-1/2” – 20” bits  Price:$122,500

Manufactured 1988, PTO, mounted on 1993 Ford 9000 with 250 Cummins engine, 9 speed Fuller transmission, 5 x 6 mud pump, no air, 5-1/4" stationary table, 2" Little Giant swivel, 18" x 3 5/8" round Kelly, hydraulic pulldown, mechanical clutches, breakout tongs, 2 rear hydraulic leveling jacks, 200" drill pipe, ready to go

Manufactured 1972, 5 x 6 mud pump, 50S1 LeRoi air compressor, pulldown, mechanical clutches, mounted on International tandem axle truck with gas engine, 40,000# mast, 15,000# drawworks, 3 drum bailer, single line pull, driller and helper"s platforms, hydraulic pulldown with 1-1/2" pulldown chains, 2" Little Giant swivel, toolracks, 3 hydraulic leveling jacks, 240" of 3-1/2" x 15" FJ (2-3/8 IF) drill pipe, LF breakout wrench, good condition, currently drilling  Price:  $90,000PRICE REDUCED:  $87,500

Manufactured 1980, mounted on 1980 International truck with DT466 engine, 5 x 6 Gardner Denver mud pump, no air compressor, 5-1/4” retractable rotary table, 3-1/2 X 24’ kelly, chain pulldown, 2” swivel, new fuel pump, new head gasket PRICE REDUCED: $48,500 - DEAL PENDING

Manufactured 1970, completely rebuilt, 5 x 6 Failing mud pump, developmental air compressor, sandline, mounted on 1990 Freightliner truck with Cat 3406 (600 hours), 5-1/4" retractable table, rod box, mechanical clutches, chain pulldown, 2" rebuilt swivel, new 32" mast, well maintained, ready to drill, no drill pipe

FAILING 1250(Ref#12693T)  Manufactured 1973, 5 x 6 mud pump, chain pulldown, retractable table, mounted on 1973 International truck, 345 gas engine, no drill pipe  Price:  $54,500

FAILING 1250(Ref#14820T) Manufactured 1965, mounted on 1970 Chevy with gas engine, 5x6 mud pump, 5-1/4” retractable table, 18’ kelly, hydraulic pulldown, mechanical clutches, breakout wrench, 1 front & 2 rear hydraulic leveling jacks, hydraulic pump has been removed, stored inside, sitting but running when parked  Price:$30,000

Built 1964, 4-1/2 x 5 Failing mud pump, Grimmer Schmidt 125cfm developmental air compressor, 5-1/4” stationary table, 2-3/8” kelly, 10" stroke, mounted on 1984 International truck with DT466 engine, PTO), 4 hydraulic over mechanical jacks, needs new tires

Manufactured 1965, mounted on 1979 International S series 2551 tandem axle truck with DT466 diesel engine, (2) mud pumps: Failing FM45 5 x 6 duplex and Gardner Denver FG FXG 5 x 6 duplex, Ingersoll Rand Type 30 250/125 air compressor hydraulically driven, 26’ x 25,000# derrick, 3-3/8” x 18’ kelly, King 15 KF water swivel, 1-1/4” pulldown chains, 5-1/4” rotary table with locking nut, air controlled clutches, welder, pipe rack, 150 gal mud pit, breakout tongs, 1 front & 2 rear hydraulic leveling jacks, stored inside, sitting but running when parked   Price:$35,000

5 x 6 Wheatley mud pump, Gardner Denver developmental air, hydraulic pulldown, mechanical clutches, stabilizer, mud pan, 3-1/2" kelly, stationary table, mounted on Ford Louisville tandem axle truck with 290 Cummins engine, PTO, 2 rear hydraulic jacks, 200" of 3-1/2" x 20" drill pipe, good condition, currently drilling  Price:  $65,000 PRICE REDUCED:  $50,000

Manufactured 1980, 425 cfm air compressor, 5 x 6 Gardner Denver mud pump, mounted on 1980 International truck with DT466 engine, retractable table, rod box, 600’ drill pipe  Price:  $69,500

3 x 4 Gardner Denver mud pump, 650/50 compressor, PTO, mounted on 1979 International 2-ton tandem axle truck with diesel engine, 3-1/2” kelly, 7-1/2” fixed table, 3 hydraulic jacks, pipe rack, mechanical pulldown, 300’ of 2-7/8” drill pipe (2-3/8 IF)  PRICE:$52,500

Mounted on 1974 Mack truck with V8 Mack engine, new 2" Little Giant swivel, 23" kelly, 5-1/4" rotary table, 256 LeRoi air compressor, 5 x 6 Gardner Denver piston pump, 2 hyd jacks, low hours, ready to work PRICE REDUCED: $72,500

Mounted on 1996 Ford F series 2 wheel drive with 5.9 Cummins diesel engine, 5-1/4" stationary table, 2 3/8" x 15" Kelly, 5x6 GD mud pump, chain pulldown, mechanical clutches, breakout wrench, rod rack, 255" of 15" Mayhew Jr rods, subs, bits, casing elevators, 4 hydraulic leveling jacks, ready to go

Manufactured 1985, mounted on Ford F800 4 x 4 truck with diesel engine, front winch, rotary table, drawworks and mud pump are new, set up for 4” wells, drill pipe and tools included  Price:  $49,500

FAILING 250(Ref#3448T)  Manufactured early 1970"s, mounted on Ford 6 wheel drive Ford F750 truck, 391 gas engine, 4-1/2 x 5 mud pump, 290 cfm air compressor, 4" retractable table (no casing can go through), chain pulldown, 2-3/8 kelly, sandline, 10" stroke (can be pulled to 20"), running condition  Price:  $29,500

Manufactured 1980, Midway 1500 drawworks, PTO, mounted on 1980 International f-2574 with 1996 Detroit engine, 10 sp transmission, 38000# rear axles, 24.5 bud wheels, 16000# front axle w/22.5 floatation tires, 4 leveling jacks, 5 ½ x 8 mud pump, new 8-1/2" Midway retractable table, 3-3/4" x 34" fluted kelly (new 2011), 3-3/4" x 5-1/4" new master bushing, 49"2" mast with new cylinders (can run 44"5" casing), 3" plumbing, 2" swivel, 2" kelly hose, hydraulic pulldown, new drivemotor 2013, hydraulic cathead, 792 Spicer transfer case (rebuilt 2013 with air controls), new lifting cylindes on mast, new main hyd pump 2012, 4 part linesm BVM breakout tong, heavy duty work floor with hinged trap door

MIDWAY 1500(Ref#15626R)  Manufactured late 1970’s, no mud pump, square kelly, no pulldown, 8” retractable table, mounted on newer Freightliner truck with diesel engine, air clutches, no pulldown, breakout tongs, 1 front and 2 rear hydraulic leveling jacks, no rod box, no pipe rack, 300’ of 20’ drill pipe (2-3/8” IF),  Price:  $54,500

Manufactured 1977, 600 cfm Leroi air compressor, 5 x 6 Gardner Denver mud pump, 8-1/2" table retractable, pull down, 9 gpm Bean pump, mounted on 1977 Ford 9000 truck with 671 Detroit engine (overhauled 2014), 600" of 2-7/8" drill stem, well maintained, ready to work  Price:  $162,500 PRICE REDUCED:  $105,000

Manufactured 1978, PTO, mounted on 1979 Ford 9000 with Cat engine, 5x6 mud pump, Leroi 750cfm air compressor, 3" x 23" kelly, 8" stationary table, breakout wrench, rod box, hydraulic pulldown, mechanical clutches, mud pan, 300" of 2 7/8" x 20" drill pipe, no leveling jacks, good running condition

PTO, mounted on 1991 Mack with diesel engine, 5x6 mud pump, GD air compressor, 7-1/2" stationary table, pulldown, manual clutches, rod rack, 2 hydraulic leveling jacks, good condition  Price:  $67,500

32’ square kelly, 51’ mast for Range III casing, mounted on GMC truck, propane engine on deck and in carrier, 8” retractable table, air clutches  Price:  $87,500

3 drum drawworks, mechanical clutches, Spicer air shift PTO, 2 rear hyd leveling jacks, 8” retractable table, 3-1/2” x 24’ square kelly, 2” Little Giant swivel, new 3 x 4 Mission mud pump, hydraulic pulldown, mounted on 1993 Freightliner truck with Cat 3406 engine, approximately 400’ of 2-7/8” full hole drill pipe  Price:  $62,500

Manufactured 1978, Triple drum, new bearings on drawworks and pulldowns, 5-1/2" x 8" Gardner Denver duplex mud pump, no air compressor, 57" x 60,000# hydraulic raised mast, Racking board, Mounted on 1978 Kenworth tandem axle truck with 8V92 Detroit diesel and PTO, 4 hydraulic leveling jacks and 2 rear screw jacks, Hydrostatic drive drawworks and rotary table, water injection, 8-1/2" retractable rotary table (4 speed transmission on rotary table), will run Range 3, 4-1/2" x 25" kelly, 4 speed hyd pulldown

Manufactured 1984, Leroi 600/250 air compressor, 5-1/2 x 8 duplex mud pump, 53’ tubular mast, racking bord, hydrostatic double drum drawworks, 7-1/2" hydrostatic rotary table, hydraulic pulldown, 24’ kelly bar, 3000’ capacity sandline, mounted on 1982 Kenworth C500 truck with 6V92TAC Detroit diesel, breakout tongs, hydraulic breakout wrench, hydraulic cathead with spinning chain, pipe rack, 1 front and 2 rear hydraulic jacks, 2-7/8" upset x 20’ pipe, 4-1/2" flush joint x 20’ pipe  Price:  $194,500

Manufactured 1978, Triple drum, new bearings on drawworks and pulldowns, 5-1/2" x 8" Gardner Denver duplex mud pump, no air compressor, 57" x 60,000# hydraulic raised mast, Racking board, Mounted on 1978 Kenworth tandem axle truck with 8V92 Detroit diesel and PTO, 4 hydraulic leveling jacks and 2 rear screw jacks, Hydrostatic drive drawworks and rotary table, water injection, 8-1/2" retractable rotary table (4 speed transmission on rotary table), will run Range 3, 4-1/2" x 25" kelly, 4 speed hyd pulldown

Manufactured 1976, PTO, mounted on International Paystar 5000 with rebuilt 350 Cummins engine, 6 x 8 Gardner Denver mud pump, 256S2 Leroi compressor, Bean water injection, 7-1/2" retractable table, 53" hydraulically raised mast, hydraulic pulldown, hydrostatic, breakout tongs, 4-1/2" hex Kelly (fluted available) no pipe rack or rod box

Manufactured 1974, 5-1/2 x 8 Gardner Denver chain driven mud pump (rebuilt), 256 LeRoi air compressor (rebuilt), 7-1/2” retractable table, mechanical clutches, pulldown, 4-1/2” x 23’ kelly (mast is set up for 30’ kelly), mounted on 1999 Kenworth truck with 440 hp Cat engine, PTO, pipe spinner, breakout tongs, water injection pump, 3 hydraluc leveling jacks, good condition,  rebuilt hydrostate, chain cases and rotary table, 200’ drill pipe and tools    Price:$175,000.

Manufactured 1974, PTO, mounted on 1974 Diamond Rio with Detroit 8V92 Detroit engine (3 years old), extended mast, rebuilt drawworks & Leroi 256S2 air compressor, no mud, sandline, 4-1/2" x 23" Kelly, breakout tongs, 8" retractable table, air clutches, hydraulic pulldown, pipe rack, 1 front & 2 rear hydraulic leveling jacks, 200" of 4-1/2" x 15" drill pipe, rig in operating condition Price:  $100,000 PRICE REDUCED: $79,500

Manufactured 1976, 3 x 4 centrifugal mud pump, LeRi 256S2 air compressor (very low hours on rebuilt), Detroit 8V92 deck engine, mounted on 1976 Paystar 5000 truck with International diesel engine, 3 hyd leveling jacks, 8-1/2" retractable table, 4-1/2" fluted kelly, new swivel, racking board, 38" mast, BJ tongs, air hammer, spare TKT transmission, some tools,

Manufactured 1972, Detroit 318 engine, 7-1/2” retractable table, 4” x 36’ kelly, chain pulldown, mounted on International 4900 tandem axle truck with 466 DT engine, 10 speed transmission, 400’ of 4-1/2” x 20’ (3-1/2 IF) drill pipe, 700’ of 4” x 30’ FH drill pipe, handling tools, last used 2021, 4 x 3 centrifugal MCM pump with John Deere engine  Price:$93,500

Manufactured 1979, mounted on 1979 International Paystar 5000 truck, 5 leveling jacks, 7-1/2" retractable rotary table, 26" kelly, 2" Little Giant swivel, 5-1/2 x 8" Gardner Denver mud pump, 256 LeRoi air compressor, racking board, currently working PRICE REDUCED: $92,500

PORTADRILL 120(Ref#9801T)  Manufactured 1968, 5 x 6 Gardner Denver mud pump, 6" stationary table, 3-1/2" x 23" kelly, mounted on 1987 Peterbilt with diesel engine, PTO, pipe rack

Built 1986, approx 540’ depth, double drum (shop build with triple clutch on each side), Gardner Denver 5 x 8 mud pump, 2” DSM swivel, 8-1/2” retractable table, trailer mounted, 46’ mast mechanically raised, 4” square kelly, 420" of 2-7/8" drill pipe  Price:  $47,500

Detroit V8 engine, 11 speed transmission, 5 x 10 Gaso hydraulic mud pump, 42’ mast, 8-1/2” retractable table, 4-1/2” x 25’ fluted round kelly, hydraulic drive winch, mounted on 1980 International, 4 hyd jacks Price:  $137,500

INGERSOLL RAND RO-300 DRILL RIG(Ref#1555Tb)  Detroit V8 engine, 11 speed transmission, (2) 5 x 6 Gardner Denver hydraulic driven pumps, 8-1/2” retractable table, 42’ mast, hyd driven double drum winch, w/ram driven kelly, 5-1/2” x 25’ kelly, mounted on 1981 International Paystar truck, 4 hyd jacks  Price:  $137,500

Manufactured 1976, mounted on Louisville Ford truck with 54 gas Ford engine, 5 and 4 transmission, new clutch, 38,000# rear, 26-1/2" Kelly bar 4" round, King swivel, 35" tower, 7-1/2" sliding table, 671 Detroit diesel deck engine, 500 cfm/125 psi Davey air compressor rebuilt with less than 2000 hours, water injection system hydraulically operated, 100" of 4" x 20" flush wall drill pipe, can drill to 900", can hold 300" steel

Manufactured 1975, mounted on tandem axle Ford Louiville truck with 534 gas engine, 5 x 4 transmission, leveling jacks, 38,000# rear, good tires, 671 Detroit diesel engine, 500 cfm/125 psi Davey air compressor, rod box, 7-1/2” fixed table, 32-1/2’ x 4-1/2” Kelly bar, runs 4” drill string, 46’ one piece mast (can be reduced), work platform, holds 300’ drill pipe, 300’ of 4” x 20’ drill pipe, slips, 8-3/4” bit, 5-7/8” sub PRICE:  $35,000

500/125 Davey air compressor, 7-1/2” fixed table, 32-1/2 x 4-1/2” kelly bar, 46’ one piece mast (can be reduced), 671 Detroit deck engine with 5 x 4 transmission, mounted on 1978 Ford 900 tandem axle truck with 534 gas engine, leveling jacks, 38,000# rear, rod box (holds 300’ of pipe), slips, work platform, 200’ of 2-7/8” drill pipe, runs 4” drill pipe  PRICE:  $37,500

Built approx 2007, 150’ – 200’ depth capacity, rig has heavy duty railroad winch cable for up and down drilling operations or for pulling pumps, 3” centrifugal mud pump, IR 40 cfm developmental air compressor, pump and compressor run off Handona gas engines, boom will handle 10’ or 20’ rods, mounted on 1998 Ford 700 2 wheel drive truck, 7 ltr propane engine, (2) tanks (40 and 80 gal), drilling, hydraulics and truck run on propane, 500 gal water tank, pipe rack, compact rig.  Includes approx 120’ of 1-1/4” x 10’ rods, bits for 1-1/4”, 2” and 4” wells,  Price:  $30,000

Manufactured 1974, mounted on 1974 Ford LN8000 with rebuilt Cat 3208, new front tires, no ruse, LeRoi compressor, 5 x 6 Gardner Denver mud pump, injection pump, new 2” plumbing, 8” retractable table, 3 hyd jacks, rod rack, 5 stabilizers 6”-12”, 19 rods of 2-7/8”, 26 rods of 3-1/2”, several bits and subs 4”-10”

Manufactured 1973, 5 x 6 Gardner Denver mud pump (new pistons and liners 2016), 50 SDS air compressor, bailing drum, 24’ kelly, 8-1/4” retractable table, hydraulic pulldown, air clutches, mounted on 1989 Chevy Topkick with Cat 3208T, rod box, 300’ of 3” drill stem, tools, well maintained  Price:  $47,500  Additional pipe available at extra cost.

EWBANKS 50(Ref#13911Ra)  4 x 5 mud pump, mounted on 1978 International single axle truck, Cat 3208 engine, PTO, 5-1/4” stationary rotary table, no air, square kelly, mud pan, pipe rack, 200’ pipe  Price:  $37,500

Built 1986, mounted on 1986 GMC Brigadier truck with Cat 3208 engine, Ford 4 cylinder Industrial deck engine, 5 x 6 mud pump, 1 mainline winch, 1 sandline winch with free fall, sitting outside for a while, was in proper working condition when parked Price on Request

Manufactured 1973, 871 Detroit diesel on deck, 450 cfm Bendix Westinghouse air compressor, no mud pumps but hydraulics are there, 4” kelly, 8” retractable table, bailing line, mounted on 1972 Ford F900 tandem axle truck with 434 gas engine, 3 hydraulic jacks, 200’ of 4-1/2” x 15’ drill pipe, sitting since 2019  Price:  $37,500

4 cylinder Ford diesel engine on deck, 38" hydraulically raised mast, 5-1/2" table retractable to 18" x 12" deep, 3-1/2" x 20" fluted Kelly, drill line drum, sandline drum and casing drum (no line on rig).  2-part block, shock in the crown for cable drilling,  Mounted on 1992 Ford L7000 all-wheel drive truck with 6 cyl Ford diesel engine, automatic transmission with big hydraulic pump, low miles, 3 hydraulic leveling jacks, needs new hoses and swivel.  Price:  $32,500 - Oklahoma

CYCLONE 35R(Ref#6558T)  5” Gardner Denver mud pump with 3 cyl diesel engine, no air, square kelly, retractable table, hydraulic pulldown, pipe rack, 4 cylinder diesel deck engine, mounted on 1985 Mack twin screw with diesel engine, 3 hyd leveling jacks, 300’ of 2” x 16’ drill pipe  Price:  $64,500

Built 1966, 5 x 6 mud pump, developmental air compressor, mounted on 1966 Ford F950 Super Duty with gas engine, (2) gas deck engines (one runs rig, one runs air compressor and mud pump), 240’ drill rod, 15’ sub and bit  Price:  $29,500

Versa-Drilloffers reliable, low-maintenance, and powerful air rotary drilling rigs. All our models are equipped with our patented, direct-drive hydraulic feed system.

This makes our rigs both safer and more powerful than the competition since the power is not transferred through cable, chains, or over sheaves and sprockets. That also means no cables or chains to adjust and fail you, which cuts back on downtime and expensive maintenance.