sherline rotary table pricelist

Sherline offers one of the finest small rotary tables on the market. It is available in manual or stepper motor drive modes. It can even be purchased with its one controller to be used as a programmable indexer. Below are links to the pages on the various versions of the Sherline 4″ rotary table. The table is driven by a worm gear with a 72:1 ratio making each turn of the handwheel equal to 5°. Fifty laser engraved handwheel marks indicate positions 1/10 of a degree apart. A 90° fixture is available to position the table in a vertical position. Our P/N 3750 Tilting Angle Table is also available for positioning at any angle from 0° to 90°.

Sherline’s rotary table is one of the most popular accessories in the tool line. Its popularity extends from the home shop to the professional machine shop due to its compact size, solid construction, and long-lasting accuracy. The handwheel is calibrated in 1/10° increments with marks every 5° around the table’s periphery. Included is a set of hold-down clamps, T-nuts, and a threaded center fixture for attaching Sherline chucks with a 3/4-16 center thread. Read more about the Sherline manual rotary table.

P/N 3700-CNC 4″ CNC-Ready rotary table with stepper motor mount: In place of the manual handwheel, a NEMA 23 stepper motor mount is attached, allowing use of the rotary table as a 4th axis on Sherline CNC mills or for whatever CNC application a customer may have where a small but accurate rotary table is needed. Read more about the Sherline CNC-Ready rotary table.

P/N 8730 4″ CNC rotary table with stepper motor mount and NEMA 23 stepper motor: This takes the above rotary table one step further with the inclusion of Sherline’s own NEMA 23 stepper motor already attached to the rotary table and including a 5-pin plug that connects directly to the Sherline 8760 4-axis driver box. Read more about the Sherline CNC rotary table with stepper motor.

Sherline offers the answer to your small rotary indexer needs by providing a programmable control box with its own power supply and driver for running the rotary table. Inputs can be entered by either degrees (to 3 decimal points) or by divisions of a circle (up to 999 divisions). Also programmable are the direction of rotation, the speed of rotation and backlash compensation. In the PROGRAM mode, two different programs of up to 40 blocks each can be entered that control rotation speed, direction and degrees or divisions plus the option to continue or pause at the end of each block. Read more about the Sherline programmable rotary indexer.

For the laser marking industry, Sherline now offers several accessories including three sizes of tooling plates designed for holding parts during scanning. Read more about the Sherline laser scanning plates.

Sherline mills and lathes can be purchased together along with a selection of Sherline’s most popular shop accessories to put together a complete machine shop with just one simple order.

Sherline defines “replacement parts” as individual pieces that become part of a complete machine or accessory. Virtually any part from a Sherline machine or accessory is available except some obsolete motors and accessories that have not been offered for many years.

Sherline offers one of the finest small rotary tables on the market. It is available in manual or CNC. It can even be purchased with a controller to be used as a programmable indexer. It’s popular among industrial shops due to its compact size, solid construction, and long-lasting accuracy.

The rotary table also is available with larger, 15/32″ through hole to which you cab mount our chucks. This modification came about after requests from our laser engraving customers. The larger through hole allows for larger stock to be held. It also has a Nickel-Teflon plating on it because it was designed to be used in an every-day production environment. This gives the table a rust resistant surface that is hard and has added lubrication qualities.

Sherline offers one of the finest small rotary tables on the market. It is available in manual or stepper motor drive modes. It can even be purchased with its one controller to be used as a programmable indexer. Below are links to the pages on the various versions of the Sherline 4″ rotary table. The table is driven by a worm gear with a 72:1 ratio making each turn of the handwheel equal to 5°. Fifty laser engraved handwheel marks indicate positions 1/10 of a degree apart. A 90° fixture is available to position the table in a vertical position. Our P/N 3750 Tilting Angle Table is also available for positioning at any angle from 0° to 90°.

P/N 3700-CNC 4″ CNC-Ready rotary table with stepper motor mount: In place of the manual handwheel, a NEMA 23 stepper motor mount is attached, allowing use of the rotary table as a 4th axis on Sherline CNC mills or for whatever CNC application a customer may have where a small but accurate rotary table is needed. Read more about the Sherline CNC-Ready rotary table.

P/N 8730 4″ CNC rotary table with stepper motor mount and NEMA 23 stepper motor: This takes the above rotary table one step further with the inclusion of Sherline’s own NEMA 23 stepper motor already attached to the rotary table and including a 5-pin plug that connects directly to the Sherline 8760 4-axis driver box. Read more about the Sherline CNC rotary table with stepper motor.

Sherline offers the answer to your small rotary indexer needs by providing a programmable control box with its own power supply and driver for running the rotary table. Inputs can be entered by either degrees (to 3 decimal points) or by divisions of a circle (up to 999 divisions). Also programmable are the direction of rotation, the speed of rotation and backlash compensation. In the PROGRAM mode, two different programs of up to 40 blocks each can be entered that control rotation speed, direction and degrees or divisions plus the option to continue or pause at the end of each block. Read more about the Sherline programmable rotary indexer.

A rotary table used in conjunction with a mill allows a machinist to produce virtually any part they can design. Sherline’s rotary table is a precision piece of equipment that has been designed to work with their vertical milling machines. However, it can be used on any mill whenever the small 4-inch size would be an advantage. The only limits are size, not complexity.

The table is 2″ high and 4″ (100mm) in diameter. The main components have been machined from solid bar stock steel, and the complete unit weighs seven pounds. The table has been engraved with a laser, giving sharp and precise lines every 5°, numbered every 15°. These lines are calibrated with the 72-tooth worm gear that is driven by the handwheel. The handwheel is divided into 50 parts, making each line on the handwheel 1/10°. This allows a circle to be divided into 3600 increments without interpolation. Seventy-two revolutions of the handwheel rotate the table one revolution.

The rotary tables can hold more weight when they are not under a continuous load. Click on the Video tab above to see examples of different weights and uses for our rotary tables.

The table T-slots are identical to those used on the Sherline mill and lathe, making the vast line of Sherline tooling available for use with this product. Two hold-down clamps and T-nuts are provided with the table. Also included is an adapter that allows Sherline’s 3- and 4-jaw chucks to be screwed directly to the rotary table. An optional right-angle attachment is available (P/N 3701) to mount the table in the vertical position to increase its versatility further. With the table mounted vertically, an optional adjustable right-angle tailstock (P/N 3702) can be mounted to the mill table. It is used to support and stabilize the other end of long work held in a chuck or otherwise attached to the rotary table.

At Sherline, we manufacture the world"s most complete line of precision milling machines, lathes, and chucker lathes (also known as Mini or Micro Mills and Lathes). We manufacture both manual and CNC machines for benchtop or tabletop-size workspaces, along with a full line of accessories to support these machines.

Please Contact Us to Order to offer competitive prices and delivery time forSherline Products - ROTARY TABLE 100MM/4" , alternative 3700 number, also you may ask some other model number is well. We can offer competitive price, and delivery time with wide products distribution network in Turkey Industrial products Market.

At Sherline, we manufacture the world"s most complete line of precision milling machines, lathes, and chucker lathes (also known as Mini or Micro Mills and Lathes). We manufacture both manual and CNC machines for benchtop or tabletop-size workspaces, along with a full line of accessories to support these machines.

An excellent choice for jewelers and miniature model makers, the Sherline 5400 CNC Mill is equipped with a powerful ¼ HP variable-speed DC spindle motor for smooth speed changes on the fly. The control box comes ready to hook up four stepper motors, if you decide to upgrade with the 4th axis rotary table. Sherline supplies their own version of the open-source Linux CNC (EMC) software, which works on Linux operating systems. This allows you to run the mill and avoid the necessity of having to purchase Windows for your shop computer. While there are other configurations of these mills that are useful for various machining tasks, the 5400 model is the one we recommend for CNC, as it is more rigid and will require less adjustment to keep in tram.

The Sherline 8770 CNC Upgrade Kit for existing 5000/5400 series mill includes three Sherline 67127 Stepper Motors, the Sherline 8760 4-Axis Driver Box, power supply, cables, and the EMC software for Linux on CD. You connect your computer (not included) to the driver box using a 25-pin parallel cable (included) attached to your computer’s parallel port.

A 4th axis rotary table made by Sherline is available for these mills which is usually set up parallel to the x axis. It is usually advisable to support the far end of the workpiece, using the Sherline right-angle adjustable tailstock listed below.

desertcart is the best online shopping platform where you can buy Sherline 8700, CNC Rotary Table Indexer from renowned brand(s). desertcart delivers the most unique and largest selection of products from across the world especially from the US, UK and India at best prices and the fastest delivery time.

desertcart ships the Sherline 8700, CNC Rotary Table Indexer to and more cities in INDIA. Get unlimited free shipping in 164+ countries with desertcart Plus membership. We can deliver the Sherline 8700, CNC Rotary Table Indexer speedily without the hassle of shipping, customs or duties.

desertcart buys Sherline 8700, CNC Rotary Table Indexer directly from the authorized agents and verifies the authenticity of all the products. We have a dedicated team who specialize in quality control and efficient delivery. We also provide a free 14 days return policy along with 24/7 customer support experience.

Yes, it is absolutely safe to buy Sherline 8700, CNC Rotary Table Indexer from desertcart, which is a 100% legitimate site operating in 164 countries. Since 2014, desertcart has been delivering a wide range of products to customers and fulfilling their desires. You will find several positive reviews by desertcart customers on portals like Trustpilot, etc. The website uses an HTTPS system to safeguard all customers and protect financial details and transactions done online. The company uses the latest upgraded technologies and software systems to ensure a fair and safe shopping experience for all customers. Your details are highly secure and guarded by the company using encryption and other latest softwares and technologies.

This video demonstrates the NEW Sherline pneumatic bar feeder on our Accu-Pro Chucker lathe. The Sherline Pneumatic Bar Feeder is now available for purchase. Link in the bio for more info.

#sherline #sherlineproducts #madeinamerica #machinist #smallbusiness #lathe #mill #chuckerlathe #machining #engineering #toolmaker #machineshop #masso #accupro #cnc #instamachinist #practicalmachinist #diy #stateoftheart #pneumatic #barfeeder

One thing that is sorta misleading about the CNC tables unless you"re seen one first hand is just how big they are. I"ve got a Tsudakoma THNC-301, which is a 320mm (12"+) table thats rotary powered and manually tiltable from horizontal to a bit past vertical. It weighs somewhere between 400 and 450 lbs, and I guess the new cost now is somewhere north of $16,000. They have positioning accuracy within a few arc seconds, and are capable of holding accuracies like this with a part that weighs a couple hundred pounds and cutting forces that can generate several hundred ft-lbs of torque.

Pricewise, assuming my 16K current estimate is accurate, that would work out to a bit less than $40/lb, because it definitely weighs over 400#. For comparison, a 10" Kitagawa power chuck for a lathe retails now for about $4000, and although I"ve never weighed one, I guess they weigh less than a hundred lbs from picking one up a "few" times. So that puts the chuck at over $40/lb. If you ever have cause to take one of these chucks apart, they are surprisingly simple. They"re accurate and repeatable, and everything is hardened and ground, but they"re still simple, especially when compared to a rotary table. A good sized collet chuck from Royal to fit an A-8 spindle nose on a lathe weighs barely over 40 lbs and costs close to $2500. Once again, its all hardened and ground, but this is the price of a pullback type chuck which is just one single piece of steel with no moving parts whatsoever, yet it sells for over $60/lb. When you compare the rotary tables and their size and complexity to other machine tool parts of similar complexity and quality, the price begins to look not so far out of line, even though its still not cheap by a long shot.