grizzly rotary table price

A rotary table is a really nice accessory to have for your mill, but one that you can delay purchasing for a while until you master the basic milling operations. The rotary table is driven by a worm-gear and is accurately calibrated in degrees and fractions of a degree.

Finding a rotary table of the right size for the mini-mill has been a lille problematic. 8-inch tables are really much too big. Even a 6-inch is pushing the limits. I have one from Grizzly. It is well made and works well, but mounting it to the table was a little bit of a challenge.

The first rotary table I purchased was made in India and was of really poor quality. I returned it to the vendor for a refund. Unfortunately, the return shipping on a heavy object like this is not cheap, so be careful what you buy!

Sherline makes a beautifully finished 4″ rotary table which I got to see first hand at Cabin Fever 2001. I was very impressed by the high quality of this item, but It was a little small for my needs.

The table I currently use is a Grizzly G1049 6-inch model. As of 03/02 it sells for $199 plus shipping. It is well-made, and I have been very satisfied with it, although it is a little large for the mini-lathe as you will see in the photos below.

After cleaning off the packing grease with kerosene, a painbrush and a rag, I mounted it on the mini-mill table using 3/8″ carriage bolts that I also use for my 3 1/2″ Grizzly milling vise. The center hole is a #2 Morse taper.

The RT is really a little oversize for the mini-mill, but still provides enough clearance to be practical. I did not feel that the weight was beyond the capabilities of the mini-mill table.

Here’s a picture showing the table with a 12″ rule and a 1/2″ mill in an end mill adaptor. Mounting the mill in a collet would provide another 2″ or so of working room. The head is at the top of the column. Also shown is the 3″ chuck from the 7×10 mini lathe. As you can see, there is adequate clearance for most operations.

The casting has mounting lugs for both horizontal or vertical mounting. This makes it potentially much more flexlible, but the table of the mini mill is small compared to the RT which makes mounting the rotary table in the vertical orientation a little tricky.

One problem is that the lower edge of the handwheel for the RT is lower than the base of the RT, so it must be positioned off the edge of the table. If the RT is positioned perpendicular to the X-axis, the mounting holes in the RT are outside the limits of the T-slots in the mill table.

For the price, I was pretty impressed by the quality of the table. I would rate it somewhat lower in quality than the Sherline 4″, but much better than the Victor 6″.

The handwheel is satin-finish steel with cleanly etched divisions. Each full rotation of the handwheel rotates the table by 4 degrees. A brochure included with the RT illustrates an indexing plate accessory which can apparently be attached to the RT, but I’m not sure whether or not Grizzly sells this accessory.

An eccentric cam between the handwheel and the table permits you adjust the meshing of the worm-screw to minimize backlash. A screw with a T-handle locks the cam in place once it is set.

Here’s a nice little 4″ imported rotary table offered by LMS for $134.95. They offer several other models, including the Sherline 4″. I don’t have any first-hand experience with this one, so I can’t really comment on quality or capabilities.

FWIW, I bought a six-inch rotary table a few years ago. As far as I can tell, it was made somewhere in eastern europe. It had some tight spots and a little backlash in the gears, and the scale engraving was crude. I can"t remember what the price was, but I know it was below $400.00. (Including a set of indexing plates.) I wanted a better one, but the budget was needed for other items. For the fraction of my shop time I need a rotary table, I considered the poor quality, low price workable.

I also bought a 4-inch rotary table from Grizzly a while back with the intent of making it indexable via stepper motor and arduino control, but that project did not work out and the table itself is just too hard to use: Another future project to sort out.

desertcart is the best online shopping platform where you can buy Grizzly Industrial G9293-10" Horizontal/Vertical Rotary Table from renowned brand(s). desertcart delivers the most unique and largest selection of products from across the world especially from the US, UK and India at best prices and the fastest delivery time.

desertcart ships the Grizzly Industrial G9293-10" Horizontal/Vertical Rotary Table to and more cities in Saint Lucia. Get unlimited free shipping in 164+ countries with desertcart Plus membership. We can deliver the Grizzly Industrial G9293-10" Horizontal/Vertical Rotary Table speedily without the hassle of shipping, customs or duties.

desertcart buys Grizzly Industrial G9293-10" Horizontal/Vertical Rotary Table directly from the authorized agents and verifies the authenticity of all the products. We have a dedicated team who specialize in quality control and efficient delivery. We also provide a free 14 days return policy along with 24/7 customer support experience.

Yes, it is absolutely safe to buy Grizzly Industrial G9293-10" Horizontal/Vertical Rotary Table from desertcart, which is a 100% legitimate site operating in 164 countries. Since 2014, desertcart has been delivering a wide range of products to customers and fulfilling their desires. You will find several positive reviews by desertcart customers on portals like Trustpilot, etc. The website uses an HTTPS system to safeguard all customers and protect financial details and transactions done online. The company uses the latest upgraded technologies and software systems to ensure a fair and safe shopping experience for all customers. Your details are highly secure and guarded by the company using encryption and other latest softwares and technologies.

desertcart is the best online shopping platform where you can buy Grizzly Industrial G9293-10" Horizontal/Vertical Rotary Table from renowned brand(s). desertcart delivers the most unique and largest selection of products from across the world especially from the US, UK and India at best prices and the fastest delivery time.

desertcart ships the Grizzly Industrial G9293-10" Horizontal/Vertical Rotary Table to and more cities in Bahamas. Get unlimited free shipping in 164+ countries with desertcart Plus membership. We can deliver the Grizzly Industrial G9293-10" Horizontal/Vertical Rotary Table speedily without the hassle of shipping, customs or duties.

desertcart buys Grizzly Industrial G9293-10" Horizontal/Vertical Rotary Table directly from the authorized agents and verifies the authenticity of all the products. We have a dedicated team who specialize in quality control and efficient delivery. We also provide a free 14 days return policy along with 24/7 customer support experience.

Yes, it is absolutely safe to buy Grizzly Industrial G9293-10" Horizontal/Vertical Rotary Table from desertcart, which is a 100% legitimate site operating in 164 countries. Since 2014, desertcart has been delivering a wide range of products to customers and fulfilling their desires. You will find several positive reviews by desertcart customers on portals like Trustpilot, etc. The website uses an HTTPS system to safeguard all customers and protect financial details and transactions done online. The company uses the latest upgraded technologies and software systems to ensure a fair and safe shopping experience for all customers. Your details are highly secure and guarded by the company using encryption and other latest softwares and technologies.

What are some of the best Rotary table brands you can buy? I only buy tools once so quality of the most important thing. I’ll happily buy vintage if people truly think they are better. I have a Bridgeport (pictured below)

Here"s a mystery for all you hobby milling machine enthusiasts. Help me ID this rotary table. I"m considering purchasing it, but can"t figure out who made it.

So, here"s what I"m wondering. About half the time I use the rotary table I find the hand wheel interferes with where I"d like to clamp it down. Looking at other tables this seems to be the common configuration, where the handwheel interferes with the mounting plane(s) of the table. Why would...

not getting any feedback to a previous post I gotta wonder if there isn"t something wrong with an Advance Rotary Table. I see lots of posts regarding "what to buy" and "I settled for a Chinese knockoff". Just wondering what is the problem? This seems to be an extremely well built and accurate...

I have a vertex 10" Rotary table with mounted chuck, I use it often. There are quite a few occasions I wish it was motorized. Has anyone done a DIY motor on their rotary table and not spent a fortune ? I"ve seen pretty expensive motors so i"m looking for DIY options. I think I may have even...

I"ve become a (happy) owner of a new-to-me 8" Phase II horizontal rotary table. Unfortunately it came with the dividing plate setup and no handwheel, so I need to make one. If you have this model of the table, I would really appreciate if you could post a picture and/or dimensions of...

So I need a rotary table for a couple of projects I have in mind, making round things on my Jet 15 mill/drill. I don"t have a lathe. I"m thinking 6" would be a reasonable size both for the things I need to make and the size of my mill. I see cheap imports on ebay starting around $160, Phase...

Horizontal or vertical use. 3" diameter table rotates 360Degree. Low profile - only 1.670" tall. 4- 5/16" T-slots. 1:36 ratio or 10Degree per handwheel revolution. Scale reads to 15 minutes. Brass lock knob.