hurco 4th axis rotary table price

The VH-6 is the smallest rotary table we offer featuring 6.3" (160mm) diameter spindle with a 1.5" through hole. The VH-6 features a newly designed pneumatic braking system which offers 120 ft-lbs of brake holding. The VH-6 maintains a rigid design with dual bearings both in the front and rear of the spindle. The centerline is 5.5". There is an optional 6" 3-Jaw chuck and adapter plate available as well as a 5C nose piece with either manual or air collet closer.

The Index Designs VH-6 is a true 4th-axis rotary table that comescomplete with compatible servo motor, and 9" extension cables ready to plug into you 4th-axis ready CNC machine.

For machines that are not 4th-axis ready: Add 4th-axis kit for each rotary table. Kit includes all parts necessary to make CNC machine 4th-axis ready. Prices vary by machine. Call for quote. Does not include installation.

Don"t need true 4th-axis? Just need point-to-point indexing?A cost-efficient solution for any CNC machine that is not 4th-axis-ready. This single-axis, programmable control box will add indexing or semi-4th-axis capability to any machine. It can be easily interfaced using a spare M-code from your CNC machine. Indexing position moves to practically any angle are programmed directly through the front panel of the control box and are triggered by an M-code, or utilize the control box"s DNC function to run a complete machine program file from a USB key.

Easily interfaces to any CNC machine and control including Fanuc, Mitsubishi, Fadal, Haas, Hurco and many others. No expensive 4th axis drive needed.​​​

1MTA offers a large range of 4th axis rotary tables supplied by Kitagawa, specialists in high-quality machining equipment. 4 axis CNC rotary tables add an additional, rotary axis to your indexing table allowing for greater precision and versatility.

The SR series of 5-axis CNC mills offers multiple advantages, starting with the machine’s design configuration that utilizes a swivel head with either an A or C style rotary table. The generous size of the rotary table provides maximum versatility because you can use the extra table space for secondary operations or 3-axis work.

Heavier Parts. Because the table is stationary, the swivel head/rotary table 5-axis machining centers are typically preferred when machining heavier parts.

Unlimited angular movement of C-axis. With a swivel head/rotary table 5-axis machining center, it is extremely important to make sure the table (C-axis) supports unlimited angular movement.  For example, if you are machining down a steep wall and going around the part, the table needs to rotate in a continuous motion. If the C-axis is limited to +360 / -360 degrees of motion, it will literally need to unwind at regular intervals to machine the part. Conversely, the tables on the Hurco SR 5-axis mills are built with unlimited and continuous rotation because our focus from design to delivery is to maximize productivity and profitability for our customers.

Tool access for swept surfaces and complex contours. There are certain applications, such as impellers or turbines, when it is beneficial to approach the part from underneath. When you mill uphill, as it is sometimes called, the base of the spindle is lower than the tool tip. The B-axis tilting head with the C-axis rotary table of the SR machining center supports this type of cutting strategy, whereas a trunnion style 5-axis mill doesn’t.

The Hurco VMX60SRTi 5-Axis CNC mill offers maximum flexibility. The SR series of 5-axis CNC mills offers multiple advantages, starting with the machine’s design configuration that utilizes a swivel head and C style rotary table. The generous size of the rotary table provides maximum versatility because you can use the extra table space for secondary operations or 3-axis work. Exceptional cutting feed rates are achieved with patented high-speed motion technology – resulting in the fastest cut with the best surface finish.

Heavier Parts. Because the table is stationary, the swivel head/rotary table 5-axis machining centers are typically preferred when machining heavier parts.

Unlimited angular movement of C-axis. With a swivel head/rotary table 5-axis machining center, it is extremely important to make sure the table (C-axis) supports unlimited angular movement. For example, if you are machining down a steep wall and going around the part, the table needs to rotate in a continuous motion. If the C-axis is limited to +360 / -360 degrees of motion, it will literally need to unwind at regular intervals to machine the part. Conversely, the tables on the Hurco SR 5-axis mills are built with unlimited and continuous rotation because our focus from design to delivery is to maximize productivity and profitability for our customers.

Tool access for swept surfaces and complex contours. There are certain applications, such as impellers or turbines, when it is beneficial to approach the part from underneath. When you mill uphill, as it is sometimes called, the base of the spindle is lower than the tool tip. The B-axis tilting head with the C-axis rotary table of the SR machining center supports this type of cutting strategy, whereas a trunnion style 5-axis mill doesn’t.

Tool Center Point Managementeliminates the need to account for the machining center’s centerlines of rotation. Instead, you simply use the solid model zero location. Post the program independent of where the stock is fixtured on the table.

Transform Plane calculates the other locations for each of the rotary moves after you locate part zero. The control software only needs you to define part zero one time, and it figures out all of the other part zero locations automatically.

At Hurco, we are immersed in 5-axis technology. We have carved out a niche in this arena because we made a commitment fifteen years ago to focus on 5-axis. We determined this type of machining center, combined with the capabilities of our control, would make our customers more profitable. Similar to the transition from manual mills to CNC mills, we believe the time is right for shops across the country to increase profit margin by investing in 5-axis.

Because we listened to our customers’ reservations about switching from a 3-axis process to 5-axis, we assembled a 5-axis applications team with a dedicated phone number and email to help. If you do NOT OWN a 5-axis machining center, the most important message you need to know: 5-sided machining on a 5-axis machining center will increase the profit margin of the parts you are producing on your 3-axis machining centers. The Hurco control makes programming easy for 5-sided—NO CAM needed!

According to benchmark data from Modern Machine Shop magazine, 24% of the highest performing shops in the U.S. are using 5-axis positioning. Hurco has carved out a niche in the 5-axis arena due to years of research and development. When we decide where to invest our resources at Hurco, our primary criteria are customer productivity and profitability. We evaluate the past, the present, and the possibilities of the future to determine what technology will benefit our customers the most. Nearly a decade ago, we determined that 5-axis machining warranted our attention and set a path to become the experts. We continue to lead the industry in developing control technology that optimizes the process for full 5-axis and 5-sided (3+2).

As our industry transitioned from manual to CNC milling, many shops got left behind. The transition from 3-axis to 5-axis may prove to be a similar situation. At the very least, you should evaluate the benefits of integrating 5-sided processes into your operation. With 5-sided, also called 3+2, you reduce setup time, increase accuracy, and expand your shop’s capability for future simultaneous 5-axis work.

When you invest in a Hurco 5-axis CNC machining center, you get two machines in one. A machine that will immediately increase the profit margin of the parts you’re producing on a 3-axis machining center via powerful 5-sided programming (no CAM needed) and a rigid machine that is fully compatible with CAD/CAM packages for simultaneous 5-axis.

The SR series of 5-axis CNC mills offers multiple advantages, starting with the machine’s design configuration that utilizes a swivel head with either an A or C style rotary table. The generous size of the rotary table provides maximum versatility because you can use the extra table space for secondary operations or 3-axis work.

Hurco CNC has been in business since 1968 and has always been cutting-edge with both machining and process-control technology. Some key dates for their equipment include 1986, when they introduced the 3-axis machine, In 1997 they introduced the VMX CNC mills, In 2003 the VM series and VTXU 5-axis were started and lastle 2004 the TM slant-beds hit the market. In 2006 their business expanded rapidly with the introduction of the SR Series 5-axis machining center and the WinMax software. The TMXMY series started in 2010 and was rebranded to include the "i" in 2012. This includes the HSi series which stands for High Speed along with the Ultimotion.

Hurco machines with trunnion tables have integrated tables instead of simply sticking a trunnion table on a 3-axis CNC machining center and then calling it a 5-axis. This allows for more clearance on the Z-axis. This series is ideal for machinists experienced in 3-axis machining, but ready for the benefits of 5-axis. You still machine in a linear fashion, but just machined more sides with this type of CNC. The trunnion 5-axis mill by Hurco allows for better undercut, larger work volume, and more torque.

Since 1984 when Hurco CNC introduced the dual-screen console, Hurco has been focused on designing controls that are easy to use and intuitive. They were early innovators in conversational programming aimed at making machining simple, however, this did not mean that they could only make simple parts.

Hurco Supports ISO/EIA standards that are common with Fanuc or Siemens programs, so you can use existing NC programs on a Hurco. The control also offers Full Macro B support and most G & M cores that an NC programmer uses.

When selecting a Hurco to meet your needs, it is helpful to understand the Series naming standards. The VM represents Vertical Milling, then there are typically two numbers representing the number of inches travel on the X-axis and another letter designating special features.

The VMX line ( Hurco VMX 30t) is the most popular of the 3-axis machining centers. The first two numbers in the name represent the X travel. We have used Vertical Milling Machining Centers in this line going back to 2003.

The SR Series (Example: VMX60SRTi) of 5-axis mills has a swivel head with either an A or C style rotary table. The extra size of the rotary table allows for versatility for secondary operations or 3-axis work. In this example, the travel is 60 x 26 x 24 with a spindle speed of 12,000 rpm and tool capacity of 40 CAT 40.

The HTM series (Example: HTM30i) is the toolroom mill designed with an open bed for easy access to the table. Its equipped with UltiMotion. In this example, the machine is 30 x 16 x 18 with 8,000 rpm and 16 tool max.

The BX series (Example: BX40i) features a high-speed double-column bridge design machining center. This highly stable, the high-weight machine provides exceptional accuracy and outstanding surface finish capabilities. In this example, the travel is 40.2 x 27.6 x 19.7, the spindle speed 18,000 rpm and machine weight is over 20,000 lbs. If a U is added to the series name (BX40Ui), then a trunnion table is mounted along the Y-axis.

The HM series (Example: HM1700i) is a line of horizontal mills equipped with pre-tensioned, dual ballscrews for excellent rigidity. It has large front and side access doors ergonomically designed for operator use. If an R is added to the series name, the model comes with a rotary torque table (HM1700Ri).

The VC Series (Example: VC500) is a cantilever 5-axis machining center. The 500 has a travel of 20.5 x 17.7 x 15.8 and a spindle speed of 10,000. The 600 has a larger travel and 12,000 rpm making it a larger more powerful machine than the 500.

The VM_U series are 5-axis trunnion table machining centers with an integrated trunnion table. Like the VMX line, the first two numbers represent the X-axis travel. For example, the VM10Ui has a travel of 21 x 16 x 19 with a spindle speed of 10,000 and tool capacity of 20 CAN 40.

Machining Overview5-sided vs. Simultaneous 5-axis There are pros and cons to both 5-sided machining and 5-axis machining. 5-sided (3+2) Simultaneous 5-axis (full 5-axis) Simple to program Cuts faster Fewer concerns about tool interference Excellent roughing strategy Better surface finish Longer tool life Allows tool to reach difficult places smoothly Impressive but slow – avoid if possible Basics of axis configuration http://www.youtube.com/watch?v=NAjuZnNKEnM To understand machine configurations, it’s important to understand the basic terminology of 5-axis machining centers. If you think in terms of a 3-axis machining center, it has an X-axis, Y-axis, and Z-axis. With a 5-axis machining center, the additional rotary axes will rotate about two of those three primary axes. The axis that rotates about the X-axis is called the A-axis. The axis that rotates about the Y-axis is called the B-axis. The axis that rotates about or under the Z-axis is called the C-axis.

Machine ConfigurationsDedicated 5-axis machining centers There are three types of machine configurations for 5-axis machining. Integrated trunnion table Swivel head with rotary table Traveling column Why / a swivel head with rotary table 5-axis machining center BC rotation axes configuration Heavier Parts: Because the table is stationary, the swivel head/rotary table machines are used with heavier parts. Versatility. You can add a vise for greater versatility because of the large table size. Use the extra space to finish the sixth side of the part or do 3-axis work. Minimizes tool interference Because the swivel head tilts the tool, you don’t need to worry about tool interference with the machine’s spindle head. Better chip control With the swivel head/rotary table configuration, you can run the machine horizontally and gain better chip control. Geographical preference The swivel head/tilting rotary table configuration continues to be more popular Germany and throughout Europe than the United States and Canada. Why / integrated trunnion table 5-axis machining center AC rotation axes configuration Better undercut capability The trunnion rotates +/-110 degrees versus the +/-92 degree rotation on a swivel head/rotary table design. Larger work volume compared to swivel head rotary table 5-axis machine because you don’t have to…

Tilt Rotary TablesTilt-Rotary Tables For some shops, adding a tilting rotary table to their 3-axis machining center is an economical solution to achieve 5-axis capabilities. There are some limitations to consider. Because the tilting-rotary tables are quite large, they monopolize most of the 3-axis machining center’s work envelope. The relatively small work surface means it should only be used for small parts (12 inches or less) and should not be used for heavy cutting operations. Additionally, you need to make sure the control of your 3-axis VMC is 5-axis capable.