trunnion rotary table quotation

The 9/23 Stallion Trunnion Table allows manufacturers to maximize the efficiency of their vertical machining center and rotary table. Every time a part is handled or indicated, there is an increased risk of scrapping it. The Stallion Trunnion Table minimizes this risk through 4th axis milling. With full 360-degree rotation, machining multiple sides of a part becomes possible, allowing your operators to handle a part as little as necessary. The extra 3 inches, compared to the Stallion 9/20, allows for double station vises.

The 9/20 Stallion Trunnion Table allows manufacturers to maximize the efficiency of their vertical machining center and rotary table. Every time a part is handled or indicated, there is an increased risk of scrapping it. The Stallion Trunnion Table minimizes this risk through 4th axis milling. With full 360-degree rotation, machining multiple sides of a part becomes possible, allowing your operators to handle a part as little as necessary.

Increase productivity and reduce setup time with the TR-8, 4th- and 5th-axis rotary table by eliminating second and third operations. In a single set-up, achieve multi-sided machining capability as well as the ability to tackle tough complex shapes and difficult to reach angles. Both housings were based on our VH8 and still come packed with the same quality. Both spindles and worms have dual bearings. Each worm wheel is helically cut and throated for greater surface contact between the wheel and worm. The B axis housing uses a stronger motor to make up for the extra weight of tilting the A axis housing and maintain accuracy.

ATS Systems is a national leading machine tool accessories and automation supplier delivering reliable solutions with unwavering support that increases manufacturing productivity and throughput leading to profitable results for its customers. For over 20 years, ATS has installed over 135K machine tool accessories and automation systems allowing customers to achieve productivity gains of over 50% and increasing profitability.

Turn Your Vertical Machining Center into a 5-Axis Production Machine. Designed specifically for Vertical Machining Centers, KME CNC’s 5-axis platters are built right into a precision rigid meehanite cast iron trunnion frame and table.

Standard models come with 1, 2, or 3 independent 5-axis platters on the trunnion table, giving your VMC full-range production capability. Just like the 5-axis tombstones, KME CNC’s trunnions are able to completely integrate with control systems, so you do not need to program the control box.

"twitter:image": "https://520machinery.com/rails/active_storage/representations/eyJfcmFpbHMiOnsibWVzc2FnZSI6IkJBaHBBd2F4Q1E9PSIsImV4cCI6bnVsbCwicHVyIjoiYmxvYl9pZCJ9fQ==--13bb2bb710ce7130f241b7f572819ee8f5c04642/eyJfcmFpbHMiOnsibWVzc2FnZSI6IkJBaDdCam9VWTI5dFltbHVaVjl2Y0hScGIyNXpld2M2RUdGMWRHOWZiM0pwWlc1MFZEb0xjbVZ6YVhwbFNTSVFNek13TGpCNE1qSXdMakFHT2daRlJnPT0iLCJleHAiOm51bGwsInB1ciI6InZhcmlhdGlvbiJ9fQ==--6000fb9b97ff571a651106bd1dd411d1b44d6f5b/Rotary%20Table.png",

"og:image": "https://520machinery.com/rails/active_storage/representations/eyJfcmFpbHMiOnsibWVzc2FnZSI6IkJBaHBBd2F4Q1E9PSIsImV4cCI6bnVsbCwicHVyIjoiYmxvYl9pZCJ9fQ==--13bb2bb710ce7130f241b7f572819ee8f5c04642/eyJfcmFpbHMiOnsibWVzc2FnZSI6IkJBaDdCam9VWTI5dFltbHVaVjl2Y0hScGIyNXpld2M2RUdGMWRHOWZiM0pwWlc1MFZEb0xjbVZ6YVhwbFNTSVFNek13TGpCNE1qSXdMakFHT2daRlJnPT0iLCJleHAiOm51bGwsInB1ciI6InZhcmlhdGlvbiJ9fQ==--6000fb9b97ff571a651106bd1dd411d1b44d6f5b/Rotary%20Table.png",

Methods & Equipment works with several manufacturers of rotary tables:  Tsudakoma, Nikken, Yuasa and more.  Give us a call or fill out the RFQ if you would like a quote on any of the high speed rotary tables, direct drive rotary table, or the new ball drive rotary table with zero backlash.

160 mm (6.3") Tilting 2-Axis Trunnion Rotary Table, with scale feedback on the A (tilting) axis. Requires Haas mill with 4th- and 5th-axis drives for true 4th- and 5th-axis operation. Scale feedback functional only on Haas mills with software version 18.xx or later. Scale feedback does not function with rotary control box. Requires a Haas mill with software version 18.00 or later.

Benefit from one of AMROK"s complete 4th axis solutions through dramatic increased efficiency of your vertical machining center and rotary table. The Stallion Trunnion Table is made from Class 35 cast iron, making it a rigid and robust solution to your CNC machining needs. The Stallion Trunnion Table can be made in a variety of shapes and sizes, ranging from 10" to 10" in length and from one to eight faces. The 4th Axis fixture can also be integrated with all of your favorite workholding devices, including Schunk, AME, Mitee-bite, Triag, Jergens, and more! Scroll down to find your perfect 4th axis workholding solution.

The combination of the Shelf Unit Trunnion Table and AMROK Dovetail Vises provides a simple, small, and affordable workholding solution that takes the productivity of your rotary table to the next level. Still made from Class 35 Cast Iron, these smaller Trunnion Tables are still as rigid and durable as their big brother, the Stallion Trunnion Table, but are better for smaller machines, smaller parts, and smaller rotary tables.

The smallest standard trunnion table size, made 100% from Class 35 Cast Iron, is designed for smaller machine tools and rotary tables. Riser blocks and braking systems are available to accommodate for your machining needs.

The 9/23 Stallion Trunnion Table is designed to hold a double station 6-inch vise and features a through hole to open/close workholding device of choice. The outboard support is customized to the center height of your indexer along with faceplate dimensions.

The 9/35 and 10/30 trunnion table fixtures feature heavy bracing for the most demanding cuts. Large face mills are not a problem. The outboard support is customized to the center height of your indexer along with faceplate dimensions. Hydraulic and Pneumatic braking systems are recommended at this size.

The Stallion 12/48, the largest standard trunnion table, is highly engineered for rigidity and accuracy. This 4th axis fixture is made for the largest rotary tables and machine tools. At this size, our hydraulic and pneumatic braking systems are highly recommended.