6 rotary table factory

Drill holes and bolt-hole patterns, mill intersecting slots and curved slots precisely. Includes worm drive hand wheel with Vernier ring for 4-degree table movement per turn, three T-slot ways for easily mounting a chuck, and two table clamp handles for stability. Main body mounts horizontally and vertically. You will need the table, tailstock, and chuck to complete your rotary table. The 6” table is a complete pack including the dividing plates and the tailstock. The 8” table takes 1/2” T-slot nuts (35-110) and has an MT3 bore. The 6" table uses 10 mm t-slot nuts and has an MT2 bore.

The H7527 manual was written by our U.S. based Technical Documentation Department and is packed with useful information. The complete and easy-to-read manual makes it easier to assemble and maintain your rotary table.

The Grizzly Customer Service and Technical Support Teams are U.S. based. Parts for the rotary table may be available online and shipped from the Grizzly parts warehouse in Springfield, MO.

WARNING:WARNING: This products contains chemicals known to the State of California to cause cancer, and birth defects or other reproductive harm. ADVERTENCIA: Este producto coniene productos quimcos reconocidos por el estado de California que provocan cáncer, defectos de nacimiento u otros danos reproductivos For more information go tohttps://www.p65warnings.ca.gov/

This listing features our most popular size of rotary table that we sell. It is from the VERTEX factory in Taiwan and is manufactured to strict specs of high density Meehanite casting. It is inspected by the HEIDENHAIN process and is guaranteed flat and parallel. 4 slots allow for easy mounting of work, or it can also accomodate a 5 inch 3 jaw chuck. Also available are dividing plates and a tail stock . Overall height is 3.11 inches and the unit ships at 28 lbs