rotary table chuck adapter plate brands

6" base adapter plate is ideal to use on 6" rotary tables of either 3 or 4 slots to mount either 4" , 5" 3-jaw ,6-jaw or 4-jaw self-centering lathe chucks.

•Fully Machined Adapters for Rotary Tables •Standard: For fixturing and mounting 3- & 4-jaw lathe chucks (above). Set Tru: For 3-, 4- & 6-Jaw Set Tru chucks

Remove the 4 cap screws around the outside. Slide the special T-slot nuts into the T-slots on the rotary table. Set the chuck and adapter over the T-slot nuts and reinsert the cap screws. The adapter is registered by the boss that extends from the bottom of the adapter. Tighten the 4 cap screws evenly.

New- by popular demand. This is a good quality 80mm 3 Jaw chuck on a specially made backplate to suit the 4″ Soba Rotary Tables (4 slot models only) . It includes inside & outside jaws as well as key and a mounting kit Overall Height is 60 mm .

The standard 3-jaw chuck is designed to hold a part and is opened and closed via a removable handle that drive a scroll to evenly open and close the chuck jaws. The chuck has master jaws that allow for hard and soft jaws to be installed. The standard chuck package includes an adapter plate to allow it to be mounted to the rotary table spindle or faceplate. Most 3-jaw chucks are adjustable to allow you to align the rotation of the chuck to run true with the rotation of the rotary table.