detron rotary table pricelist

After adding four-axis or five axis rotary table on the machine tool, multi axis machining can be realized, which can improve the machining efficiency and yield. With the improvement of manufacturing automation in China, the demand for rotary table increases significantly.

Now, I will introduce the situation of several rotary table brands in China. We will divide them into four categories: Europe andAmerica, Japan, Taiwan and Chinese brands.

Taiwan: TJR, Detron and GSA are the main brands, as well as DEX, Autocam and HW. These rotary tables are not only configured on Chinese brand machine tools, but also sold to end customers. Their precision is not high and their service life is not long, but they can meet the requirements when machining parts with low precision. Some users will consider these brands when their budget is limited. Among these brands, TJR has the best sales volume, with an annual sales volume of more than 10000 sets, because they have the most complete distribution network, complete models and cheap prices.Most importantl

China: there are many locally four-axis brands in China, such as Gutia,Silvercnc, Blue tech, CP and Deshu. The product quality of these brands is comparable to that of Taiwan. Due to more favorable prices and fast delivery, they have occupied the market of most Taiwan brands. The four axis of Chinese brands mainly adopt roller cam structure or harmonic structure. The wear resistance of roller cam is better than that of worm gear, with long service life and good accuracy retention. The price of harmonic reducer rotary table is low, which is suitable for 3C industry. These two structures meet the needs of the market and have been recognized by customers.

The next LK TC-710 with828D PPU280, packed and ready for her new home in KZN, complete with BT30 12’000rpm DDS, Detron 4th axis Rotary table, and at prices you won’t believe. This will be LK delivery number 3 in 2 weeks, only one more stock TC-7…

CNC Indexing has both pneumatic and hydraulic tables in stock for immediate delivery! Looking for a TJR rotary table price? We have a range of cost-effective options to suit your needs!

For TJR’s pneumatic series of rotary tables, prices start at $5,685. The AR Series is offered in both right hand and left hand motor mount options, with face plate diameter ranges of 125mm – 255mm.

Both the pneumatic and hydraulic brake series TJR rotary table price includes standard features such as an anti-wearing worm gear, durable, high-tensile brass shafts, and braking systems with a large clamping range. For new TJR tables, a standard 3-year parts warranty is included.

VERTEX DP-1 Vertex Dividing Plate Suits HV-4 HV-6 Rotary Tables CALL NOW AND DO A DEAL ADD THIS ASSET TO YOUR WORKSHOP WE OFFER MACHINERY SOLUTIONS AT AFFORDABLE PRICES. Order Code R016 Plate Specifications A-PLATE 15, 1....

VERTEX HV-4 Vertex Rotary Table 110mm CALL NOW AND DO A DEAL ADD THIS ASSET TO YOUR WORKSHOP WE OFFER MACHINERY SOLUTIONS AT AFFORDABLE PRICES. Order Code R005 Manufactured in Taiwan The Vertex Rotary Table has been desi....

- Worktable diameter 630. - Equipped with extra large bearings, preloaded in radial and axial directions. - Motor is mounted at right side vertical and horizontal application . - Full gear depth transmitted by dual lead ....

CNC Tilting Rotary Table - UNIT GFA-170S-2W-300 GFA Compact Type, Multi-Spindle Tilting Rotary Table 170mm Multiple rotary axis increase the production into high volume and advance the integration for automation. Please ....

- Worktable diameter 210. - Exclusive patented dual pneumatic piston braking system. - Higher rotation speed. - Equipped with high precision cross roller. - Full gear depth transmitted by dual lead worm drive, resulting ....

This 6 Rotary Table comes complete with a Chuck Backplate, 2 Hold-down clamps and 4xT-Nuts. The product may be used horizontally or vertically. The chuck backplate is for Chinese 125mm 3-jaw or 4-jaw chucks and is also f....

Electro-Permanent Magnetic Indexing Tables for milling or boring machines providing precision 5 degree or 1 degree divisions and allowing uninterrupted 5 sided machining. Available sizes 300mm, 470mm, 600mm and 800mm squ....

VERTEX HV-8 Vertex Rotary Table 203mm CALL NOW AND DO A DEAL ADD THIS ASSET TO YOUR WORKSHOP WE OFFER MACHINERY SOLUTIONS AT AFFORDABLE PRICES. Order Code R008 Manufactured in Taiwan The Vertex Rotary Table has been desi....

- Worktable diameter 170. - Exclusive patented dual pneumatic piston braking system. - Enlarged the high precision cross roller bearing - Transmitted by dual lead worm with high efficiency and full depth gear teeth. Plea....

VERTEX HV-10 Vertex Rotary Table 254mm CALL NOW AND DO A DEAL ADD THIS ASSET TO YOUR WORKSHOP WE OFFER MACHINERY SOLUTIONS AT AFFORDABLE PRICES. Order Code R010 Manufactured in Taiwan The Vertex Rotary Table has been des....

VERTEX TS-2 Vertex Tailstock 145-115mm Centre Height Suits HV-8 Rotary Table CALL NOW AND DO A DEAL ADD THIS ASSET TO YOUR WORKSHOP WE OFFER MACHINERY SOLUTIONS AT AFFORDABLE PRICES. Order Code R014 When using Super Inde....

100mm 4 Rotary Table Combo Size 100mm Suitable Chuck 80mm Bore MT2 T-Slot 8mm Center Height 68mm Gear Ratio 72 1 Handle Graduation 2 Min. Vernier Reading 10 Overall Size L x W x H mm 140x126x73 Weight 9.2kg....

1 detron GX-125~255 Series CNC Rotary Table GX-125P GX-170P GX-210P GX-255P GX-125PL GX-170PL GX-210PL GX-255PL GX-170H GX-210H GX-250H GX-170S GX-210S Operation Manual detron machine co., LTD No. 47-5, Zuncian Road, Shengang District 42952, Taichung City, Taiwan TEL: FAX: Version A

2 Table of Contents 1 Introduction Specifications GX 125/170 Specifications GX 210 Specifications GX 250/255 Specifications Dimensional Drawing GX 125P/PL Dimensional Drawing GX 170~255P/PL Dimensional Drawing GX 170/210/250H Dimensional Drawing GX 170/210S Dimensional Drawing Circuit Diagram Pneumatic Circuit Diagram Pneumatic/Hydraulic Circuit Diagram Mechanism of Main Parts GX P/PL/S Series Mechanism of Main Parts GX 170/210/250H Mechanism of Main Parts Commissioning Procedure...6 1

4 detron 1 Introduction 1 Introduction Welcome to detron, thank you for purchasing our CNC Rotary Table. This manual provides important information and detailed instruction for operating and maintaining the machine. We suggest that you peruse the manual thoroughly before operating to ensure optimal conditions of the machine and to effectively prolong its service life. Keep this manual for convenient consultation. 1-1

5 detron 2 Specifications 2.1 GX-125/170 Specifications No. Item Unit GX-125P/PL GX-170P/PL/H GX-170S 1 Worktable diameter mm Ø125 Ø170 Ø170 2 Center bore diameter mm Ø30H7 Ø40H7 Ø40H7 3 Through- hole diameter mm Ø25 Ø40 Ø40 4 Height of center Vertical mm Horizontal mm Height of table Vertical ( Remark 1) mm Width of T-slot mm 12H7 12H7 12H7 7 Width of guide block mm Drive pressure / method MPa 0.5~0.7(Pne.) 0.5~0.7(Pne.)/2.5(Hyd.) 0.5~0.7(Pne.) 9 Clamping torque N.m (Pne.)/240(Hyd.) Servo motor type ( Remark 2) FANUC α2i α4i α4i MITSUBISHI HF75T HF54T HF54T SIEMENS 1FK7042 1FK7060 1FK7060 HEIDENHAIN QSY96A QSY116C QSY116C YASKAWA SGMJV04A SGMGV09A SGMGV09A 11 Transmission ratio 1/90 1/90 1/90 12 Max. table speed min Allowable loading inertia Kg.m Resolution deg Indexing accuracy sec Repeatability sec Net weight (servo motor excluded) Kg Vertical Kg Allowable loading Horizontal Kg capacity Tailstock applied Kg Allowable load (when table clamped) N N.m N.m (Pne.)/240(Hyd.) Allowable wheel torque N.m Remark 1:Vertical table height excluding eye bolt. Remark 2:Other motor brands available, but the motor cover may be varied as the brand differs. 2-1

6 detron 2 Specifications 2.2 GX-210 Specifications No. Item Unit GX-210P/PL/H GX-210S 1 Worktable diameter mm Ø210 Ø210 2 Center bore diameter mm Ø40H7 Ø40H7 3 Through- hole diameter mm Ø40 Ø40 4 Height of center Vertical mm Horizontal mm Height of table Vertical ( Remark 1) mm Width of T-slot mm 12H7 12H7 7 Width of guide block mm Drive pressure / method MPa 0.5~0.7(Pne.)/2.5(Hyd.) 0.5~0.7(Pne.) 9 Clamping torque N.m 260(Pne.)/300(Hyd.) Servo motor type ( Remark 2) FANUC α4i α4i MITSUBISHI HF54T HF54T SIEMENS 1FK7060 1FK7063 HEIDENHAIN QSY116C QSY116C YASKAWA SGMGV09A SGMGV09A 11 Transmission ratio 1/90 1/90 12 Max. table speed min Allowable loading inertia Kg.m Resolution deg Indexing accuracy sec Repeatability sec Net weight (servo motor excluded) Kg Vertical Kg Allowable loading Horizontal Kg capacity Tailstock applied Kg Allowable load (when table clamped) N N.m N.m 260(Pne.)/300(Hyd.) Allowable wheel torque N.m Remark 1:Vertical table height excluding eye bolt. Remark 2:Other motor brands available, but the motor cover may be varied as the brand differs. 2-2

7 detron 2 Specifications 2.3 GX-250/255 Specifications No. Item Unit GX-250H GX255-P/PL 1 Worktable diameter mm Ø255 Ø255 2 Center bore diameter mm Ø40H7 Ø40H7 3 Through- hole diameter mm Ø40 Ø40 4 Height of center Vertical mm Horizontal mm Height of table Vertical ( Remark 1) mm Width of T-slot mm 12H7 12H7 7 Width of guide block mm Drive pressure / method MPa 2.5(Hyd.) 0.5~0.7(Pne.) 9 Clamping torque N.m Servo motor type ( Remark 2) FANUC α4i α4i MITSUBISHI HF54T HF54T SIEMENS 1FK7060 1FK7060 HEIDENHAIN QSY116E QSY116E YASKAWA SGMGV09A SGMGV09A 11 Transmission ratio 1/90 1/90 12 Max. table speed min Allowable loading inertia Kg.m Resolution deg Indexing accuracy sec Repeatability sec Net weight (servo motor excluded) Kg Vertical Kg Allowable loading Horizontal Kg capacity Tailstock applied Kg Allowable load (when table clamped) N N.m N.m Allowable wheel torque N.m Remark 1:Vertical table height excluding eye bolt. Remark 2:Other motor brands available, but the motor cover may be varied as the brand differs. 2-3

8 detron 3 Dimensional Drawing 3.1 GX-125P/PL Dimensional Drawing *Dimension Unit: mm *For GX-PL series, the motor cover is at the left of the worktable. Fig

9 detron 3 Dimensional Drawing 3.2 GX-170~255P/PL Dimensional Drawing *Dimension Unit: mm *For GX-PL series, the motor cover is at the left of the worktable. Dimensions and Model Dimensions Code No. P/PL Model A B C D E F G H I J GX GX GX Fig

10 detron 3 Dimensional Drawing 3.3 GX-170/210/250H Dimensional Drawing *Dimension Unit: mm Dimensions and Model Dimensions Code No. H Model A B C D E F G H I J GX GX GX Fig

11 detron 3 Dimensional Drawing 3.4 GX-170/210S Dimensional Drawing *Dimension Unit: mm Dimensions and Model Dimensions Code No. S Model A B C D E F G H I J K L GX GX Fig

14 detron 5 Mechanism of Main Parts 5.1 GX-P/PL/S Series Mechanism of Main Parts *For GX-PL series, the motor cover is at the left of the worktable. GX-P/S Series 上視圖 上視圖 Top View Top View GX-PL Series 正視圖 Front View 右側視圖 Right View Fig 5-1 正視圖 Front View 右側視圖 Right View 5-1

16 detron 6 Commissioning Procedure 6 Commissioning Procedure Prior to using the rotary table, prepare the machine in the following sequence: A. Unpacking and preparation Prior to using and commissioning the rotary table, prepare the follows: (1).Unpack and remove the attaching parts from the rotary table. (2).Wipe away the grease with a cleaning agent. (Note:Do not use benzene, gasoline, or diesel which would produce rust.) (3).Clean and de-burr the mounting surfaces and the rotary table. (4).Mount the rotary table on the machine center. (see Fig 6-2) (5).Add Lubrication. (see Fig 5-1~5-2 Page 11-1) (6).Make sure that the electrical connection between the Rotary Table and the machine controller is well connected according to the attached electrical circuit diagram. (see Electronic Circuit Diagram of packing) (Note:Switch off the main power of the machine center before connecting the electric cables.) (7).GX-P/PL/S Series:Supply compressed air for clamping. (see Fig 5-1 Page 10-1) (Note: pneumatic source requires a F.R.L. Unit to ensure the suspending particulates are less than 5um) GX-170/210/250H:Supply hydraulic pressure for clamping and to eliminate the air in hydraulic oil. (see Fig 5-2 Page 10-2) (Note: Hydraulic oil needs filtration) Hydraulic system backpressure must be under 0.1MPa, to prevent the conditions of not unclamping completely or the extension of unclamping time of the brake mechanism when conducting unclamp command, because above conditions will cause mechanism damage or servo overload shut down. (8). Supply compressed air to bring up barotropic fluid inside of motor cover. Tighten the pneumatic adjustable valve by clockwise and then lose this valve by 1/4~1/2 round to release the air (till sound of spout appears and air eject from nozzle). The positive air pressure stays to avoid any humidity accumulated in the cover and prevent damage and corrosion of internal electrical components. (see Fig 6-1) (9).Set up rotary table parameters.( see Parameter Sheet of package) (10). Trial run. (11).Set the grid shift amount for machine zero-return.(see Page 8-2) Fig 6-1 Fig

17 detron 6 Commissioning Procedure 6 Commissioning Procedure B. Trial run (1).Make sure both the Rotary table mounting face and plate surface are clean. (2).Make sure the Rotary table is load-free. (3).Repeat clamp and unclamp functions; test for normal operation. (4).Check precision. (see Inspection Certificate sheet of package) (5).Rotate the CNC Rotary Table clockwise and counter-clockwise about twice at low speed(f300) for the first time, and make sure that the Rotary Table rotates smoothly, then gradually increase the speed up to the rapid speed. (6).Perform Zero reset, check for correct return to 0. (7).Check different command operations by using NC operation commands. When an unclamp/clamp signal is detected, it is strongly suggested that a 0.5 sec. delay be applied before carrying out the subsequent command to ensure the table has completed the unclamping or clamping action. This is to prevent internal mechanism damage or overload of the servo motor. Never start processing with the Rotary table before completing the above actions, otherwise mechanism damage may occur. 6-2

18 detron 7 PLC Flow Chart of Control System 7 PLC Flow Chart of Control System To make sure detron Rotary tables are under good conditions when operating, please follow below PLC control circuit process for operation. (see Fig 7-1) Positioning start Clamp command Servo ON Unclamp command Unclamp confirmation switch OFF NO Clamp confirmation switch OFF? NO Clamp confirmation switch ON NO Unclamp confirmation switch ON? NO 0.5 sec or longer delay remark sec delay remark 1 Servo OFF remark 2 Rotary Table move command Positioning end In-position check? NO 0.5 sec delay remark 1 Fig 7-1 Remark 1:Delay time is our recommended time, but actual delay time may differ depending on different rotary table operation conditions. Remark 2:When the unbalanced load makes a large current (70% or more of the rated current) occur in operation, turn the servo motor OFF. Turn the servo motor OFF as well when applying to full closed loop control. 7-1

19 detron 8 Zero Return Adjustment and Grid Shift Amount Setting 8.1 Zero Return Adjustment Zero Reset of Rotary Table is achieved via detection of proximity switches. Inactive or false action of proximity switch may be caused by the following conditions: Proximity Switch failure. Excessive distance between proximity switch and Zero Dog (remove proximity switch bracket, loosen nut and adjust the distance of proximity switch); the optimal distance shall be 1.0~2.0 mm. ( see Fig 8-1) Inaccurate relative position between proximity switch and Zero Dog. Open the cover of observation window, loosen screws on Zero Dog; move Zero Dog to a proper position and test for correct action. Replace the cover of observation window. (see Fig 5-1~5-2) Fig

20 detron 8 Zero Return Adjustment and Grid Shift Amount Setting 8.2 Zero Return Grid Shift Amount Setting (1).When the machine receives Zero Reset Command from NC controller, the Rotary Table will start to rotate in the specified forward direction to zero position. (2).When the Zero Dog touches the Proximity Switch, Rotary Table starts to decelerate for an accurate and prompt stop.( see Fig 8-3) (3).When the Rotary Table reduces its rotation speed, it will stop at Zero when a reference signal from the motor is received. (4).Perform turntable operation several times; measure errors between the actual stopping point and nominal stopping point of the Rotary Table. Enter the measurements into Zero Offset of the NC System for correction. NOTE: In general, Zero Return is positioned when face plate T-slot is parallel to the bottom of the body, and the "0" position on the face plate indicates to the zero plate position.( see Fig 8-2) If the result is different, the computer parameter needs to be adjusted to achieve parallelism. The correction parameter shall not be of negative value. If a negative value occurs, it means the Zero Dog must be moved forward to a proper position for carrying out parameter adjustment. Fig 8-2 Fig

21 detron 9 Backlash Adjustment 9.1 Worm Wheel and Worm Shaft Backlash Inspection Detron NC Rotary Table is highly reliable and meant for maintenance free. In order to maintain normal conditions for a prolonged period, some adjustments and maintenance are required. Excessive backlash between the Worm Wheel and the Worm Shaft will cause an undesirable effect between the Worm Wheel and the Worm Shaft when operating the Rotary Table. This not only affects processing accuracy of the work piece, but also directly reduces the service life of both the Worm Wheel and the Worm Shaft. When the backlash between the Worm Wheel and the Worm Shaft is too small, excessive heat may be generated by the Worm Wheel will cause the worm wheel seized. In order to maintain long-term operation of the machine, the proper gap between the Worm Wheel and the Worm Shaft must be checked periodically.(see Page 9-1) Inspection Procedure (see Fig 9-1) (1).Make sure that braking mechanism of the measuring axis is in released state, and the servomotor is in the OFF state. (2).Place dial gauge pin on the inner side of the T-slot. (3).Place a steel plate into the T-slot of face plate. (4).Slowly turn the face plate manually by using the steel plate, exert a 15 to 20 kg force clockwise or counter clockwise; release the force immediately after exerting it, allow the gauge to resume a steady reading. Followed by doing the same in the reverse direction and read the reading. The difference between two readings of the dial gauge is the value of the gap between gears. (5)Method for measuring the backlash: Take 4 points on the Worm Wheel in 90 intervals (Rotary Table rotation angle). Make one measurement every 90 and take the average. (6)At 20 C environmental temperature, the proper backlash between the Worm Wheel and the Worm Shaft should be 10 to 15 seconds. Adjustment is required if otherwise. Based on thermal expansion principle, this backlash value should be properly adjusted in accordance with surrounding temperatures. Room temperature for using the rotary table:5 C ~ 40 C. The turntable is still operable even when the backlash exceeds the upper limit listed above. When a backlash adjustment is required, and the backlash correction value is entered into the NC Unit by using parameter methods, then the backlash value becomes 0. Fig

22 detron 9 Backlash Adjustment 9.2 Worm Wheel and Worm Shaft Backlash Adjustment Adjusting an excessive backlash(see Fig 9-2) (1).Evenly loosen the Adjusting Screw 1/2 turns counterclockwise. (2).Evenly tighten the Locking Screw clockwise. This makes the worm shaft axis move forward to reduce the backlash. (The order to tighten the Locking Screw:L1->L2->L3->L4->L5->L6) (3).Measure the backlash as described on the previous page.(see Page 9-1) (4). Based on the measurement, adjust the Adjusting Screw repetitively until the standard backlash value is reached. (see Page 9-1) Fig

23 detron 9 Backlash Adjustment 9.2 Worm Wheel and Worm Shaft Backlash Adjustment Adjusting an insufficient backlash(see Fig 9-3) (1).Evenly loosen the Locking Screw 1/2 turns counterclockwise. (2). Evenly tighten the Adjusting Screw. This makes the worm shaft axis move backward to reduce the backlash. (The order to tighten the Adjusting Screw:A1->A2->A3->A4->A5->A6) (3).Evenly tighten the Locking Screw clockwise. (The order to tighten the Locking Screw:L1->L2->L3->L4->L5->L6) (4).Measure backlash as described on the previous page. (see Page 9-1) (5).Based on measurement, adjust the Adjusting Screw repetitively until the standard backlash value is reached. (see Page 9-1) Fig

24 detron 9 Backlash Adjustment 9.3 Transmission Gear Backlash Adjustment Adjusting Backlash of the Gear(see Fig 9-4) (1).Remove the Motor Cover. (2).Loosen the Motor Adapter Locking Screw. (3).Push Motor Adapter downward, so that there is no backslash between motor gear teeth and the Worm Shaft. (4).Place dial gauge on the body. (5).Adjust gear center distance in the arrow direction (backslash increases when Motor Adapter moves up, decreases when Motor Adapter moves down). (6).Standard backlash. Model GX-125 GX-170/210/250/255 Backlash(Dimensional unit:mm) ~ ~ (7).Tighten Motor Adapter Locking Screws. (8).Replace the Motor Cover. Fig

25 detron 10 Clamp/Unclamp Device 10.1 Pneumatic Clamp/Unclamping Device After placing a work piece, make sure to tighten the rotary table. Processing without tightening the rotary table will cause quick wear or damage of the worm wheel as well as tool and work piece damage. When adjusting the angle of the rotary table or performing continuous cutting, always confirm that the rotary table is in the released state. To ensure the correct state, always check the Clamp/Unclamp signal for correct indication. In order to achieve proper clamp torque, the rotary table requires a pneumatic pressure of 0.5~0.7 MPa and the compressed air must flow through an air filter, pressure regulator and lubricant filter. Two connection terminals (1/4"PT) are provided with the product, at the top and the rear; select one for use. On monthly basis, open the drain hole cover at the back of rotary table and check for any moisture ingression from the pipeline. If water ingression exists, improve the F.R.L. Unit on the machine. Solenoid valve set and pneumatic brake mechanism are high precision designs. To maintain proper functionality, the F.R.L. Unit accuracy requirement is under 5um, so as to prevent solenoid valves or the brake mechanism from being clogged by suspending particles and causing a machine stop. The solenoid valve on the machine controls the Clamp/Unclamp action. When power is switched on and the Clamp is selected, the piston in the solenoid valve is pushed forward by compressed air when the valve receives the Clamp command, causing the brake disk clamping on the Rotary Table. Friction at this time is the clamping torque. A reed switch on the single movement pneumatic cylinder is provided to detect the Clamp/Unclamp state of the Rotary Table. Pressure setting of the switch is 0.2~0.3 MPa. When an unclamp/clamp signal is detected, it is strongly suggested that a 0.5sec. delay be applied before carrying out the subsequent command, to ensure the table has completed the unclamping or clamping condition. This is for preventing internal mechanism damage or overload of the servo motor. 10-1

26 detron 10 Clamp/Unclamp Device 10.2 Hydraulic Clamp/Unclamping Device After placing a work piece, make sure to tighten the rotary table. Processing without tightening the rotary table will cause quick wear or damage of the worm wheel as well as tool and work piece damage. When adjusting the angle of the rotary table or performing continuous cutting, always confirm that the rotary table is in the released state. To ensure the correct state, always check the Clamp/Unclamp signal for correct indication. In order to achieve proper clamp torque, the rotary table requires 2.5MPa hydraulic pressure; when applying a lower pressure, clamping torque will be decreased accordingly, two connection terminals (1/4"PT) are provided with the product, at the top and the rear, select one for use. After receiving clamping command, hydraulic oil flows to the drum brake, drum brake will clamp the rotary table evenly, so that the rotary table can reach the best and accurate clamping torque. When receiving unclamping command, hydraulic oil will be released, the brake pressure disappears and the drum brake returns it"s original form, so that the rotary table will be under unclamping condition. While the hydraulic oil flows to the drum brake, it also flows to related mechanism for showing unclamp/clamp of the rotary table. At the time in clamp, the dog activating piston (when hydro-oil acting the piston) shift upwards, the proximity switch (LS51) shows the rotary table is clamped. At the time in unclamp, the dog activating piston shit downwards, the proximity switch (LS52) shows the rotary table is unclamped. When mechanism switch clamping, the actuating pressure is more than 1~1.2MPa. When using pressure switch for unclamping/clamping, the actuating pressure range is 1.8~2.2MPa. When hydraulic oil is mixed with air, the clamping torque can"t reach the expected performance; then we need to exhaust the air. Please follow the instruction below: (1). Adjust the oil pressure to 2MPa (to prevent the mass oil spilling over the hole). (2). Loosen the bolts on the top of the body for 1/4~1/2 loop. (3).Repeat unclamp and clamp commands, then the hydraulic oil mixed with air will drain out. Till the oil draining out is no longer with air, tighten the bolts, the air exhausting process is completed. Hydraulic system backpressure must be under 0.1MPa, to prevent the conditions of not unclamping completely or the extension of unclamping time of the brake mechanism when conducting unclamp command, because above conditions will cause mechanism damage or servo overload shut down. When an unclamp/clamp signal is detected, it is strongly suggested that a 0.5sec. delay be applied before carrying out the subsequent command, to ensure the table has completed the unclamping or clamping condition. This is for preventing internal mechanism damage or overload of the servo motor. 10-2

27 detron 11 Lubrication Replacement 11 Lubrication Replacement Lubricant is a key factor to performance and service life of your machine. Always use lubricants recommended in the manual. Model GX-125 GX-170 GX-210/250/255 Oil quantity required in machine body Unit: Liter Precautions for replenishing and replacing lubricant. (1) Selection of lubricant is based on several features: a. The Oil film strength, rust resistance and oxidation resistance. b. The viscosity class shall be within ISO-VG100~150. Since lubricants engulf the Worm Wheel, Worm Shaft and other respective parts, quality products must be used to ensure satisfactory operation. Recommended Ambient Temp. range is 18 ~40 under normal usage, Contact Lubricant mfg for suggested lubricant product if the temp. is higher or lower than the recommended range. mfg Shell Omala 150 Product Esso Spartanep 150 Mobile Mobile Gear 629 JoMo Reductus 100 (2) Pay attention to keep the lubricant clean; always clean up auxiliary tools for replenishing oils. Never allow external dust and debris entering the oil tank. (3) DO NOT mix lubricants of different brands since their ingredients are different; mixed use may impair lubrication properties. (4) Replenish the oil to the centerline of the oil level window (see Fig 5-1~5-2 for oil level position). (5) Replace the lubricant every 6 months or after 1200hr operation; check oil amount from time to time and replenish as necessary. 11-1

28 detron 12 Troubleshooting No Troubleshooting Symptom Cause Check Solution Turntable not turning (1) Motor not running * Cable damage *Check cable and end connections * Refer to electric circuit diagram (2) Motor idle running *Tapered sleeve slackened *Check all gears * Fix again 2 Turntable runs not smoothly * Overload * Check load and gyration inertia * Check motor operation at that time * Check operation condition at low-speed. * Reduce the load or stop processing this workpiece 3 Noise when rotating *Faulty fixation of gears in gear *Check equipment condition *Re-calibrate box * Incorrect lubrication *Check lubricant type and quantity *Replenish or replace lubricant * Slackened operation (Residual hydraulic pressure) * Damaged worm wheel, worm shaft or gear in gear box * Check clamp part and turntable clamps (Slackened) pressure switch control part * Calibrate tooth face or replace gear Motor over-current * Faulty zero offset * Over current only when tightened * Re-do zero offset * Overload operation * Check load * Alter load or loading method Inaccuracy * Backslash of worm wheel and worm shaft too small or uneven * Insufficient warm-up time or incorrect parameter setting * Check backslash *Adjust backslash *Check program * Revise program (1) Poor division precision *Insufficient Hyd. pressure *Check pressure *Adjust pressure (2) face plate face undulation or center sway Clamp/Unclamp operation (1) No Clamp/Unclamp signal *Incorrect solenoid valve spec. *Check solenoid valve spec. *Check solenoid valve condition * Replace with correct solenoid valve spec. * Replace solenoid valve * Pipeline clogged *Check pipeline * Replace pipeline * Worm Wheel face worn out * Measure backslash *Adjust backslash *Slackened nut of shaft bearing *Compare with precision tolerance *Signal line connection defect *Check signal cable * Improper adjustment of switch equipment *Pressure switch damaged (2) Delayed signal output * Hydraulic filter screen clogged Clicking sound in cutting operation. (1)When starting to cut after * External force emplacing workpiece * Clamping action (2) In continuous cutting *Check filter screen * Insufficient hydraulic pressure *Check pipeline for clog or fracture *Check hydraulic pressure supply system for normal operation * Excessive worm wheel backslash * Poor teeth engagement *Check cutting condition *Check tightening tool and turntable clamp (or unclamp) pressure switch * Measure backslash of worm shaft and worm wheel * Measure gear backslash *Contact detron or dealer *Re-adjust *Replace pressure switch *Replace pipeline *Correct cutting condition *Adjust backslash *Adjust backslash 12-1

32 detron 13 Parts List GX170PL No. Part No. Chinese English Q ty Spec. 1 GF170N0025C 固定架 Bracket 1 2 軍規接頭轉接蓋板 Plate of connection 1 3 GX125N0078A 無頭螺栓 Set screw 6 4 GX125N0083B 汽缸固定鈑 Bracket 1 5 GX170N0021C 調整套管座 Sleeve of worm shaft 1 6 GX170N0023B03 迫緊壓蓋 Fasten Ring 1 7 GX170N0026C01 軸承外壓蓋 Flange 1 8 GX170N0028D01 封蓋 Cover 1 9 GX170N0030A01 原點近接開關座 Proximity switch bracket 1 10 馬達齒輪 Gear 1 11 GX170N0034F01 蝸桿 Worm Shaft 1 12 GX170N0036D02 主煞車活塞 Piston 1 13 GX170N0037A 煞車間隔片 -I Spacer-I 1 14 GX170N0037C01 煞車間隔片 -II Spacer-II 1 15 GX170N0040F01 煞車片 -I Spinning disc-i 1 16 GX170N0040G01 煞車片 -Ⅱ Spinning disc-ii 1 17 GX170N0041A02 蝸桿齒輪 Gear 1 18 GX170N0044B 注油封蓋 Cover 1 19 GX170N0045F02 尾端封蓋 Cover 1 20 GX170N0047C01 加壓片 Stationary disc 1 21 GX170N0080A03 主心軸 Main spindle 1 22 GX170N0081A03 軸承內壓蓋 Flange 1 23 GX170N0082A02 原點碰塊 Home dog 1 24 馬達調整板 Motor plate 1 25 GX170N5002B01 蝸輪 Worm Wheel 1 26 馬達護蓋 Cover 1 27 GX170NW002F03 盤面加工圖 Table plate 1 28 GX170NW003B01 本體加工圖 Body 1 29 GX255N0037B 盤面原點指示板 Home indicator 1 30 GX320N0052A 蓋板 Cover 1 31 GX320N0054C01 軍規接頭護蓋 Cover 1 32 GX320N0056B 軍規接頭轉接蓋板膠皮 Rubber for cover 2 33 GX320N0058C 鍵 Key

33 detron 13 Parts List GX170PL No. Part No. Chinese English Q ty Spec. 101 A05CB05X005 無頭內六角螺栓 Set screw 3 M5x5L 102 A06CB03X010 六角承窩螺栓 SKT.HD.CAP.SCR 10 M3x10L 103 A06CB04X012 六角承窩螺栓 SKT.HD.CAP.SCR 2 M4x12L 104 A06CB05X016 六角承窩螺栓 SKT.HD.CAP.SCR 20 M5x16L 105 A06CB06X012 六角承窩螺栓 SKT.HD.CAP.SCR 2 M6x12L 106 A06CB06X016 六角承窩螺栓 SKT.HD.CAP.SCR 18 M6x16L 107 A06CB06X020 六角承窩螺栓 SKT.HD.CAP.SCR 18 M6x20L 108 A06CB06X025 六角承窩螺栓 SKT.HD.CAP.SCR 6 M6x25L 109 A06CB06X035 六角承窩螺栓 SKT.HD.CAP.SCR 8 M6x35L 110 A06CB08X025 六角承窩螺栓 SKT.HD.CAP.SCR 12 M8x25L 111 A06CB08X030 六角承窩螺栓 SKT.HD.CAP.SCR 4 M8x30L 112 A08CB04X010 皿頭螺栓 Flat HD.SKT.SCR 4 M4X10L 113 A08CB05X008 皿型螺栓 Flat HD.SKT.SCR 1 M5X8L 114 A09CB04X008 內六角圓頭螺絲 Round HD.CAP.SCR 12 M4X8L 115 A09CB05X008 半圓頭螺栓 Round HD.CAP.SCR 4 M5X8L 116 A09CB05X016 半圓頭螺栓 Round HD.CAP.SCR 8 M5X A12CBA08000 環首螺栓 Eyebolt A20GN74312F 油鏡 - 鋁合金 Oil level 1 1/2"PF 119 A35JJ0PM200 精密軸承用螺帽 Lock nut 1 YSF-M20X1.5P 120 A41JJ00SM06 螺栓墊片 Washer 8 M6 13-5

34 detron 13 Parts List GX170PL No. Part No. Chinese English Q ty Spec. 201 J260000G065 O 型環 O-ring 1 G J260000P005 O 型環 O-ring 2 P5 203 J260000P007 O 型環 O-ring 2 P7 204 J260000P018 O 型環 O-ring 1 P J260000P135 O 型環 O-ring 1 P J26000AS043 O 型環 O-ring 1 AS J26000AS046 O 型環 O-ring 1 AS J26000AS047 O 型環 O-ring 1 AS J26000AS135 O 型環 O-ring 1 AS J26000AS163 O 型環 O-ring 1 AS J26000AS164 O 型環 O-ring 1 AS J2600AR4227 星型環 Quad-ring 1 QRAR J2600AR4233 星形環 Quad-ring 1 QRAR J28AE4279E0 旋轉油封 Oil seal 1 TC115X140X

35 detron 13 Parts List GX170PL No. Part No. Chinese English Q ty Spec. 301 BH000NK2016 徑向軸承 Radial needle bearing 2 NK20/ BL TN 成套止推滾柱軸承 Thrust roller bearing BNRB10020BA 交叉滾子軸承 Cross roller bearing VPMVSY100A0 電磁閥 Solenoid valve 1 MVSY-100-4E1 402 馬達 Servo motor 訊號線 Signal cable 1 MS3102A-20-29P 404 動力線 Power cable 1 MS3102A 28-11P 405 ES0E2EX3D20 近接開關 Proximity switch 1 E2E-X3D2-N-5M 406 MCFA M 氣壓缸 Cylinder C0600OR0280 C 型孔內扣環 C ring 2 R H05A006DM05 公快速接頭 Elbow H06A0PMA14T 公快速接頭 Connector H07A006D18T 迷你型管接頭 Elbow Connector 1 PL6-01T 505 H07A006DM05 90 度快速接頭 Elbow 1 PL6-M5 506 H07AM06DM06 90 度快速接頭 ( 迷你型 ) Quick Connector (Mini) 1 PL6-M6M 507 H31A000M05S 消音器 Silencer 1 MSL-S-M5 508 H36A000014T 塞頭 Plug 7 1/4"PT 509 H36A000018T 塞頭 Plug 1 1/8"PT 510 H36A00005C1 黑色螺栓蓋 Cover C1 511 H44A0000M05 一字型塞頭 Plug 1 LP-M5 512 P110008D018 直銷 Pin 1 8X18L 513 P110008D040 直銷 Pin 2 8X40L 13-7

We are highly renowned and trusted for importing JIH AUTO 20R NC Fully Automatic Rotary Table Angular Sawing Machine at reasonable prices. We are importing these products since 34 Years 1 Month 2 Days . We are Ravik Engineers Private Limited who are importing only quality products after 100% credibility and quality check. We import products from various countries around the world.

We are U- Tech Associates with headquarters in Bengaluru. We import CNC Tilting Rotary Table since 22 Years 1 Month 2 Days at negotiated prices while making timely payments to the sellers. We only require quality products for industrial and business purposes. Only durable and damage-resistant products are imported by us. Please contact us if you are an eligible exporter.

Established in the year 1988, we buy products which are durable and easy-to-use after a thorough inspection only. We are based in the city of Pune as Shiva Enterprises, here to buy Horizontal & Vertical Rotary Table for an essential industrial use. We can be contacted right away through phone no. and e-mail.

located in Ahmedabad, We are involved in importing Rotary Table and Drive from different countries at our location. We also import for essential and industrial uses. Only genuine exporters may contact us.

Jasmine Enterprises is located in Chennai established since 20 Years 1 Month 2 Days . We are involved in importing Horizontal Vertical Rotary Table from different countries at our location. We also import for essential and industrial uses. Only genuine exporters may contact us.

Isol Corp is involved in importing Rotary Table Gluing Machine With Pick & Place from various parts of the world from 11 Years 1 Month 2 Days . We also import good quality . We are the team who are efficiently quality-oriented. Genuine quality and industrial checks are thoroughly undertaken.

We are highly renowned and trusted for importing Hollow Rotary Table at reasonable prices. We are importing these products since 10 Years 1 Month 2 Days . We are Satara Gears who are based in Pune importing only quality products after 100% credibility and quality check. We import products from various countries around the world.

We are highly renowned and trusted for importing CNC Tilting Rotary Table at reasonable prices. We are importing these products since 22 Years 1 Month 2 Days . We are U-tech Associates who are based in Bengaluru importing only quality products after 100% credibility and quality check. We import products from various countries around the world.

Roller Bearing (india) is located in Kolkata established since 39 Years 1 Month 2 Days . We are involved in importing Rotary Table Bearing from different countries at our location. We also import for essential and industrial uses. Only genuine exporters may contact us.

Established in the year 11/07/2008, we buy products which are durable and easy-to-use after a thorough inspection only. We are based in the city of Ghaziabad as SMS PRODUCTS INDIA PRIVATE LIMITED, here to buy Electric Rotary Table for an essential industrial use. We can be contacted right away through phone no. and e-mail.

We are highly renowned and trusted for importing Rotary Tables at reasonable prices. We are importing these products since 13 Years 1 Month 2 Days . We are SMK Turnkey Solutions Private Limited who are importing only quality products after 100% credibility and quality check. We import products from various countries around the world.

We are highly renowned and trusted for importing JIH AUTO 20R NC Fully Automatic Rotary Table Angular Sawing Machine at reasonable prices. We are importing these products since 34 Years 1 Month 2 Days . We are Ravik Engineers Private Limited who are importing only quality products after 100% credibility and quality check. We import products from various countries around the world.

Incepted in the year 1994, we are based in Thane of India. We are eager to import quality products from the Rotary Table Type Automatic Tapping Machine exporters at negotiated prices. We also order huge quantity of products for multiple uses as and when required. If you are an exporter, you can contact us.

We are the famous importers of Index Rotary Table to be imported to Chennai. Since the 25 Years 1 Month 2 Days of its inception, Wintech is renowned for importing quality products after thorough quality checks at negotiable prices. We would like to to do business with an exporter who can provide on-time delivery to us.

We are a high quality Rotary Table Clock buyers based in Panchkula from 20 Years 1 Month 2 Days . We import only quality Rotary Table Clock for using it for industrial purposes. We order those products only after all quality and authenticity checks.

We are Guru Harkrishan Hydraulics who excel in importing Rotary Table from different countries. We are based in Faridabad since 28 Years 1 Month 2 Days importing quality and quantity verified products from different countries. We would like to get in touch with genuine exporters who deliver goods in a timely fashion.

Detron employs strict quality control at all stages of manufacture, Manufacturing all elements in house. With a huge efficient production facility, this has ensured that Detron are the selected partner of a wide variety of machine tool builders, both at home and internationally.

We have a technical support team of UK based engineers and a dedicated sales department to assist you substantial experience in the supply and installation of Rotary tables to a wide range of CNC Machine Tools

Tables are available EX STOCK, are supplied with a standard 2 YEAR WARRANTY, which can be extended, and for a small additional cost an “any event failure” warranty which even covers crashes and accidental damage. Loan tables available to keep your production going while any repairs are carried out.

The tooling division – and the focus of this article – is headed up by tooling and workholding manager Jason Short and dedicated to providing toolholding, workholding and fixturing solutions for a variety of applications. The wide portfolio spans everything from spindle tooling, collets and machine vices, through to angle heads, heat shrink technology and rotary tables. Oil and mist extraction systems are also included.

It features workholding equipment from 5th Axis (USA); driven tooling from Algra (Italy); presetting machines from Alfa-Sys (Lichtenstein); spindle tooling from Kojex (Taiwan), ETP (Sweden), Diebold (Germany), Tuscan and Zurn (Germany); collets and pullstuds from Kojex and Tuscan; speed increasers and angle heads from OMG (Italy); fourth and fifth axis rotary tables from Detron (Taiwan); heatshrink machines and tooling from Diebold; probes and measuring equipment from Tschorn (Germany), (as well as Blum, Heidenhain and Renishaw); and oil and mist extraction systems from AR Filtrazioni (Italy).

Fourth and fifth axis rotary tables are provided courtesy of Taiwan-based Detron, one of YMT’s most successful product lines. “We believe that from a specification and accuracy perspective, Detron can give Japanese manufacturers a real run for their money,” Mr Short says.

“Additionally, an important aspect with rotary tables is the interface with the machine tool. Our service engineers fit all the cabling and motors here onsite before being installed on the customer’s machine so we can guarantee everything will work first time. We also have our own test rig in house for ongoing servicing. As far as I’m aware, none of our competitors offer this service.”

rotary indexing units with globoidal cam mechanisms are ideal for dial plate indexing. Each have stationary center through bores for routing supply lines and dual flanges for mounting a stationary dial over the indexing dial.  mechanism type:                       gl more...

We offer rotary indexing table. Cam indexing drive : electromechanical rotary indexing tables are compact series that automate the transfer of work piece between successive station. globoidal cam index drives the “globoidal cam index drives” are mechanical index tables which more...

is graduated 360 degrees on a level skirting to facilitate easy reading, can release worm for rapid indexing. Turntable can be rigidly locked in any position. Micro  dialling is arranged for minute reading by a cap which also covers the indexing plate sector from the dust. Dia. more...

ROTARY MILLING TABLE is graduated 360 degrees on a level skirting to facilitate easy reading, can release worm for rapid indexing. Turntable can be rigidly locked in any position. Micro dialling is arranged for minute reading by a cap which also covers the indexing plate sector f more...

Custom made Rotary Indexing integrated with Ultrasonic Welding machine. To weld 22-25 parts per minute. Loading is Manual. Unloading can be Automatic/Manual. The machine increases machine utilization time, increasing productivity and reducing operator fatigue. more...

the sm series of indexers are servo-mechanical indexers designed for application where different output motions are required on the same table. These indexers provide highly accurate motion, with the added capability to move medium to heavy loads. Our preloaded cam & turret mecha more...

wmw union 2000X1900 mm rapid feed Rotary Table Rotary Table wmw union 2000X1900 mm with rapid feed wmw union 2000X1900 mm Rotary Table wmw union 2000X1900 mm with rapid feed Rotary Table more...

Innocenti Rotary Table 2500 X 2000 mm Used machinery sale rotary table innocenti 2500 Used Rotary tables machinery Second hand machines innocenti rotary  Innocenti Rotary Table 2500 X 2000 mm Used machinery sale,  Innocenti Rotary Table 2500X2000 mm,  rotary table innocenti 25 more...

The “Globoidal Cam Index Drives” are mechanical index tables which convert, continuous rotary input motion into intermittent, indexing output motion. The input shaft carries the Globoidal cam. This cam has a groove, which obeys the acceleration control “motion law”. The o more...