autocam rotary table quotation

After adding four-axis or five axis rotary table on the machine tool, multi axis machining can be realized, which can improve the machining efficiency and yield. With the improvement of manufacturing automation in China, the demand for rotary table increases significantly.

Now, I will introduce the situation of several rotary table brands in China. We will divide them into four categories: Europe andAmerica, Japan, Taiwan and Chinese brands.

Taiwan: TJR, Detron and GSA are the main brands, as well as DEX, Autocam and HW. These rotary tables are not only configured on Chinese brand machine tools, but also sold to end customers. Their precision is not high and their service life is not long, but they can meet the requirements when machining parts with low precision. Some users will consider these brands when their budget is limited. Among these brands, TJR has the best sales volume, with an annual sales volume of more than 10000 sets, because they have the most complete distribution network, complete models and cheap prices.Most importantl

China: there are many locally four-axis brands in China, such as Gutia,Silvercnc, Blue tech, CP and Deshu. The product quality of these brands is comparable to that of Taiwan. Due to more favorable prices and fast delivery, they have occupied the market of most Taiwan brands. The four axis of Chinese brands mainly adopt roller cam structure or harmonic structure. The wear resistance of roller cam is better than that of worm gear, with long service life and good accuracy retention. The price of harmonic reducer rotary table is low, which is suitable for 3C industry. These two structures meet the needs of the market and have been recognized by customers.

We believe that our wealth of experience and our passion for quality makes Midland Engineering the best choice when it comes to the repair of your rotary table. We understand the need for a quality assured repair service with a focus on keeping downtime to a minimum.

2. To drain the A axis unscrew the drain port [4] at the bottom of the rotary. The rotary likely will be to be suspended in the air to do this. Rotary units are heavy so take appropriate safety measures while draining the oil. Clean off the oil remaining on the rotary and replace the screw. Both rotaries have two screws on the bottom.

4. To drain the B axis tilt axis to 90° and unscrew the drain port [3]. Only one side has a drain port check for it before tilting the rotary. Once the rotary is empty screw the port plug back in.

Double the machining speed! AutoCam presents the new Multi-spindle Roller Cam Driver tilting rotary table. The rotations are driven by only one servo unit, furthermore the accuracy and working ability as good as tradition one rotation models. It can carry the production volume and precision at the same time.

AutoCam adhere to three ideas of " Insistence, Innovation, Growing ". It’s our duty to carry technology first of the world, and improve our competition advantage to create with customer"s cooperative opportunity.

Our customers rely mainly on machine tools manufacturers in initial stage. We researched and developed and produced " the automatic tool changer unit " at first. Beginning to sell 60 growth to sell 600 per month per month, and we cultivate the achievement that have today in this field. We have invested " Rotary Table" in 2006.

We exhibit the practical “Tilting rotary table”(B/C ATS160B) products on TIMTOS (Taipei International Machine Tools Show) for the first time in 2007, and exhibited the “Rotary table” and “Tilting rotary table” of the whole series on TIMTOS in 2009. We extend for the future with the development orbit of history, and management idea and industry future is it go down to writing of us.

Year by years, metal-cutting technology steps forward to an higher level. The application of machine tool becomes more diversity. We want it faster, cheaper, and better! AutoCam, provides key accessories for machining tool as 4/5 axis NC Rotary table and Automatic Tool Changer. To meet the marketing demand, we spend years of time, to improve our product every day. To satisfy todays’ production capacity, multi-axis metal working, we focus on the target market such as automobile industry, aerospace technology, medical application and also energy solution. AutoCam is established in 1995. Auto is for “automated production”; Cam for “Roller Cam”. All products made by AutoCam are designed by different kind of cam. In 1998, we announced the first one cam-type sync-unclamping ATC. By 2004, Roller Cam Driver series launched; It becomes an AutoCam flagship product for years till today. “What we want is when engineers push the Cycle-Start button, they feel the difference.”

Methods Machine Tools Inc. has introduced the Feeler HV-1100V vertical machining center. It features a dedicated trunnion, 4+1 axis configuration, and a 13.8-in. rotary table. The trunnion—Autocam with roller cam technology—offers a 16- by 14-in. work envelope. The tilting A axis has a full...

Historically, CAM software was seen to have several shortcomings that necessitated an overly high level of involvement by skilled CNC machinists. Fallows created the first CAD software but this had severe shortcomings and was promptly taken back into the developing stage.G-code set for increased flexibility. In some cases, such as improperly set up CAM software or specific tools, the CNC machine required manual editing before the program will run properly. None of these issues were so insurmountable that a thoughtful engineer or skilled machine operator could not overcome for prototyping or small production runs; G-Code is a simple language. In high production or high precision shops, a different set of problems were encountered where an experienced CNC machinist must both hand-code programs and run CAM software.

In milling applications on hardware with rotary table and/or rotary head axes, a separate finishing process called contouring can be performed. Instead of stepping down in fine-grained increments to approximate a surface, the work piece or tool is rotated to make the cutting surfaces of the tool tangent to the ideal part features. This produces an excellent surface finish with high dimensional accuracy. This process is commonly used to machine complex organic shapes such as turbine and impeller blades, which due to their complex curves and overlapping geometry, are impossible to machine with only three axis machines.

Dillon standard and custom chuck jaws and collet pads and jaws are suitable for high speed machining, as well as precision boring, tapping, drilling and finishing across virtually all industrial markets.