bridgeport 15 rotary table pricelist

Rotary Tables└ Workholding Supplies└ Workholding & Toolholding└ CNC, Metalworking & Manufacturing└ Business & IndustrialAll CategoriesAntiquesArtBabyBooks & MagazinesBusiness & IndustrialCameras & PhotoCell Phones & AccessoriesClothing, Shoes & AccessoriesCoins & Paper MoneyCollectiblesComputers/Tablets & NetworkingConsumer ElectronicsCraftsDolls & BearsMovies & TVEntertainment MemorabiliaGift Cards & CouponsHealth & BeautyHome & GardenJewelry & WatchesMusicMusical Instruments & GearPet SuppliesPottery & GlassReal EstateSpecialty ServicesSporting GoodsSports Mem, Cards & Fan ShopStampsTickets & ExperiencesToys & HobbiesTravelVideo Games & ConsolesEverything Else

5. Payments. PIS must receive the balance of the total purchase price no later than the close of business on the day following the auction (the "Final Payment Date"). All payments must be by cashier"s or certified check, federal wire transfer of immediately available funds or a corporate check accompanied with a bank letter of guarantee, and all of the foregoing must be in form, scope and substance acceptable to PIS. Credit cards are only accepted for Electronic bidding registration and for Liquidated Damages in the event of a default. If paying by credit card, the exchange rate for sales conducted in foreign currencies will be posted the day of the sale and will be based upon the current currency conversion rates. Without limiting PIS discretion, no corporate checks without a bank guarantee and no personal checks will be accepted. No title shall pass to Buyer until the total purchase price and all Taxes have been paid to PIS in collected funds.

6. Taxes. Buyer must also pay to PIS on or before the Final Payment Date, all sales, export, use and other taxes due to any federal, state or local taxing authority (the "Taxes") as a result of Buyer"s purchase, including without limitation, any taxes arising from any Buyer"s Premium (as defined below). To receive the benefit of any tax exemption, Buyer must supply PIS with a sales tax exemption certificate acceptable in form, scope and substance to PIS in PIS sole discretion.7. Buyer"s Premium. PIS, in its sole discretion, will impose a buyer"s premium ("Buyer"s Premium") on any Goods sold. The Buyer"s Premium is a percentage that is added to the final purchase price of any item. An 18% buyer’s premium will be charged on all assets. The buyer’s premium will be reduced to 15% for payments made by means of cash, cashier"s check, company check (with bank letter of guarantee) or wire transfer within 48 hours of sale close.

8B. Goods weighing more than 100 pounds must be removed by a qualified, insured rigger. Before any removal, Buyer must provide PIS with a certificate of insurance from the rigger, which certificate must be in form, scope and content acceptable to PIS in PIS sole discretion. Without limiting PIS discretion, such certificate must show that the rigger carries comprehensive liability insurance written by an insurance carrier of national standing and in an amount of not less than two million dollars ($2,000,000.00). Without limiting the generality of the foregoing, Buyer shall restore and repair all real and personal property that is altered or damaged as a result of Buyer"s removal of the Goods. PIS shall have no responsibility to disconnect utilities to the sold asset, including electric, gas, waste and water lines. Buyer is solely responsible to properly remove and store in appropriate containers all fluids, oils, hazardous chemicals, etc., from machinery purchased. Buyer does hereby indemnify PIS, the owner of the Goods and the owner of the premises in which the Goods are located, from any and all claims, damages, and losses arising from Buyer"s actions or actions with respect to the Goods and Buyer"s presence on the premises in which the Goods are located, including without limitation, injuries to persons or property and environmental violations or contamination. Risk of loss on any Goods shall pass to the Buyer upon payment in full to PIS of all sums due from Buyer in respect to the Goods.

15.PIS, in its sole discretion, reserves the right to refuse the bid of any person without providing any notice or reason therefore. PIS reserves the right to deny the usage and access by any person or third party of any and all PIS Services and Websites without notification.

NOTE: Displayed on page Bridgeport RT-15 15Inch Width Bridgeport RT-15 ROTARY TABLE is listed under ID# 13684 by Machinery Values Inc. in category Rotary Tables. For any additional info regarding this Bridgeport RT-15 please contact directly Machinery Values Inc..

15Inch Width Bridgeport RT-15 ROTARY TABLE 14792 / 145622, Make: Bridgeport, Model: RT-15 Listed on this page by Machinery Values Inc. equipment in category Rotary Tables 0, 48 Width 60 Length Cleveland T-48-M ROTARY TABLE, Cleveland, T-48-M 0, 11 Width Moore ULTRA PRECISE ROTARY TABLE, +/- 2 SECONDS, HOR. & VERT.,, Moore, "ULTRA PRECISE" 1967, 24 Width Rotab 24-5 ROTARY TABLE, Power Rotation, Manual Tilt, T-Slotted R, Rotab, 24-5 1964, 30 Width Giddings & Lewis Air Lift ROTARY TABLE, Air-Lift, Graduated Scale, Giddings & Lewis, Air Lift 0, 84 Width 120 Length Giddings & Lewis Hyrdrostatic ROTARY TABLE, 50,000 lb, Giddings & Lewis, Hyrdrostatic 1980, 11 Width 11 Length Advance 11 ROTARY TABLE, Cross Sliding Table, T-Slott, Advance, 11" 1980, 13 Width 13 Length Advance B-13 ROTARY TABLE, Cross Sliding Table, T-Slot, Advance, B-13 0, 36 Width Producto J699 ROTARY TABLE, Fanuc AC Servos,, Producto, J699 1967, 78 Width 96 Length Giddings & Lewis Air Lift ROTARY TABLE, 90 Degree Shot, Giddings & Lewis, Air Lift 0, 8 Width Olsen Industrial 8 SUPER SPACER ROTARY TABLE, w/8 T-Slotted Face, Olsen Industrial, 8" SUPER SPACER. If you are looking for equipment and do not have much time for search post your FREE wanted ad to be displayed on MachineKs.com website and have your needs transferred to hundreds of machinery dealers. If you have equipment for sale and want to offer it to the Buyers, sign in to MACHINEKS.COM

It works well. Functionally, it’s pretty great.It comes with some extras, but not much of an explanation. Because it can mount parallel or perpendicular, it lacks a way to clamp it to the table for parallel use. I had to machine a toe clamp to hold the other end. Thankfully, I have a mill. But, it’d have been so much easier to include one since it’s necessary.Otherwise, the 90 turns for 360 (1 for 4), works out pretty well for any angle divisible by four - 72, 60, 120, etc. I had to machine a way to attach my lathe chuck. Spent a half hour making the little piece I pictured… worked well for not using the dividing plates.Solid. Fairly precise. Works. But you’re going to have to make things to use it.

I"ve been thinking of getting a rotary table for use on my bridgeport, but haven"t fully formed an idea about what I really want. Based on what I"ve seen, I"m starting to think that I probably want to end up with 2, first a smaller one that would either do horizontal and vertical mounting or adjustable angle, probably in the 6-10" range (small enough that I can easily move), and then a larger one like a big, used bridgeport one for larger work.

Well, I got one as a gift for my birthday a couple of days ago (a PhaseII), and after getting a good look at it close up I realized that I"m probably going to end up returning this one and going with something else. The biggest thing is slot sizes... it has an indexing piece for use up on end that looks like it is intended for one slot size, and the slots on the table face are a smaller size, both smaller than the standard slots/holddowns that I have for the bridgeport. Seems like it would be a hassle mount it down to the table securely and then I"d need another set of hold down hardware just for use with the table.

We answer all of our emails. If you do not receive a response to your email, please check your spam filter to see if it is in there. If you do not see it there feel free to give us a call 815-434-5897

modelBR2J1 "/2 h.p.turret millerBridgeport"s Model BR2J is aheavy-medium duty machineequipped with a model 2J variablespeed milling, drilling and boringhead as standard equipment.However, with the use of acombination of Bridgeport headattachments, the capacity ofthe machine includes right anglemilling, drilling and boringas well as vertical. Profiling, slotting,cherrying, flycutting and jig boringcan also be accomplished.Angles in all planes are set throughworm gear controls. Ram typeconstruction permits movement ofhead over the ta ble withoutrechecking the squareness of thespindle.In and out movement of the ram,through rack and pinion, iseffortless. The rear end of the ramhas a regular swivel adapter formounting additional heads, givingangular settings in both verticaland horizontal planes.FEATURES• Expanding dovetail locks ram and turret into oneunit to prevent vibration.• Column, knee and table are constructed with extra wide ways andtaper gibs for maximum rigidity.• All operation controls are at the operator"s fingertips;graduated dials are extra large for easy reading.• Anti-friction bearings are used throughout the machine.• Worm and gear controls are used for angular settings of head.• Wick feed lubrication distributes oil to all spindle bearings andmoving parts by means of a flush system.6

Ao MIN.12MAX./~oor 45"DB}-------- C -------1SPECIFICATIONS in inches MODEL 9BR2J MODEL 12BR2JTABLE LENGTHS 32 36 42 48 32 36 42 48LONGITUDINAL TRAVEL - manual 20 24 30 36 20 24 30 36LONGITUDINAL TRAVEL - power feed 16 1 /2 20 1 /2 26 1 /2 - 16 1 /2 20 1 /2 26 1 /2 -CROSS TRAVEL-­9 9 9 9 12 12 12 12VERTICAL TRAVEL OF KNEE 16 16 16 16 16 16 16 16A OVERALL HEIGHT-­82 3 / 16 823116 82 3 / 16 823116 82 3 /16 82 3 / 16 82 3 / 16 82 3 / 16B OVERALL DEPTH 58% 58% 58% 58% 63 63 63 63C OVERALL WIDTH 65 1 /2 69 1 /2 75 1 /2 811/2 65Y2 69 1 /2 75 1 /2 811/2DEFGMIN. DISTANCE 0 0 0 0 0 0 0 0MAX. DISTANCE 18Y2 18Y2 18 1 /2 18 1 /2 18 1 /2 18 1 /2 18 1 /2 18 12MIN. DISTANCE 0 0 0 0 0 0 0 0MAX. DISTANCE 12 12 12 12 12 12 12 12MIN. DISTANCE 6% 6% 6% 6% 6% 6% 6% 6%MAX. DISTANCE 18% 18% 18% 18% 18% 18% 18% 18%MIN. DISTANCE 8%. 8% 8% 8% 8% 8% 8% 8%MAX. DISTANCE 20% 20% 20% 20% 20% 20% 20% 20%oMODEL "2J" VARIABLE SPEED HEAD SPINDLE - R 8 taperSPINDLE SPEEDS - infinitely variable from 60 to 4200 R.P.M. COLLET CAPACITY - %POWER FEED per spindle revolution - .0015 .003 .006 QUILL TRAVEL - 57

modelBRJ1 h.p.turret millerBridgeport"s Model BRJ is aheavy-medium duty machineequipped with a model "J" milling,drilling and boring head asstandard equipment.However, with the use of acombination of Bridgeport headattachments, the capacity ofthe machine includes right anglemilling, drilling and boringas well as vertical. Profiling, slotting,cherrying, flycutting and jig boringcan also be accomplished.Angles in all planes are set throughworm gear controls. Ram typeconstruction permits movement ofhead over the ta ble withoutrechecking the squareness of thespindle.In and out movement of the ram,through rack and pinion, iseffortless. The rear end of the ramhas a regular swivel adapter formounting additional heads, givingangular settings in both verticaland horizontal planes.FEATURES• Expanding dovetail locks ram and turret into oneunit to prevent vibration.• Column, knee and table are constructed with extra wide ways andtaper gibs for maximum rigidity.• All operation controls are at the operator"s fingertips;graduated dials are extra large for easy reading.• Anti·friction bearings are used throughout the machine.• Worm and gear controls are used for angular settings of head.• Wick feed lubrication distributes oil to all spindle bearings andmoving parts by means of a flush system.8

Ao MIN.12MAX./~7, ,~~ E: G---+---ioB C -----------1SPECIFICATIONS in inches MODEL 9BRJ MODEL 12BRJTABLE LENGTHS 32 36 42 48 32 36 42 48LONGITUDINAL TRAVEL - manual 20 24 30 36 20 24 30 36LONGITUDINAL TRAVEL - power feed 16 1 /2 20 1 /2 26 1 /2 ­ 16 1 /2 20 1 /2 26 1 /2 ­-_.CROSS TRAVEL 9 9 9 9 12 12 12 12VERTICAL TRAVEL OF KNEE 16 16 16 16 16 16 16 16A OVERALL HEIGHT 71"7/ 16 777/16 777/16 777/16 777/16 777/16 777/16 777/16B OVERALL DEPTH 58% 58% 58% 58% 63 63 63 63C OVERALL WIDTH 65 1 /2 69 1 /2 75112 811/2 65 1 /2 69 1 /2 75 1 /2 8Il!2DEFGMIN. DISTANCE 0 0 0 O. 0 0 0 0MAX. DISTANCE 18 1 /2 18 1 /2 18112 18112 18 1 /2 18 1 /2 18112 18 1 /2MIN. DISTANCE 0 0 0 0 0 0 0 0MAX. DISTANCE 12 12 12 12 12 12 12 12MIN. DISTANCE 6% 6% 6% 6% 6% 6% 6% 6%MAX. DISTANCE 18% 18% 18% 18% 18% 18% 18% 18%MIN. DISTANCE 8% 8% 8% 8% 8% 8% 8% 8%MAX. DISTANCE 20% 20% 20% 20% 20% 20% 20% 20%MODEL "J" HEAD SPINDLE - R-8 taperSPEEDS, R.P.M. - 80 135 210 325 660 1115 1750 2720 COLLET CAPACITY - %POWER FEED per spindle revolution - .0015 .003 .006 QUILL TRAVEL - 59

modelBRM"/2 h.p.turret millerBridgeport"s Model BRM turret milleris a medium-light duty machinewhich has a thousand and oneapplications in machine shops, jobshops, experimental labs,maintenance and repair shops, andeven home workshops.This machine is a Basic Bridgeport"chassis" equipped with a Model"M" Master milling head, which hasall the accuracy and advantagesof the larger "J" head except that itis rated at 1/2 H.P., and does nothave power down feed to quill.In addition to vertical and horizontalmilling, this machine can handle alltypes of machining operationsincluding drilling, boring, jig boring,cherrying, shaping, flycutting,profiling and slotting.FEATURES• Column, knee and table are constructed with extra wide ways andtaper gibs for maximum rigidity.• Anti-friction bearings are used throughout.• Convenient location of all controls makes for less operatorfatigue, faster production.• Ram moves in and out easily through rack and pinion.• Worm and gear controls are used for angular settings of head.• Table, knee and saddle locks located in front of machinefor convenience.10

----~---j/~/45°Ao MIN.12 MAX.o~--------B---------.{t--------C----------JSPECIFICATIONS in inches MODEL 9BRM MODEL 12BRMTABLE LENGTHS 32 36 42 48 32 36 42 48LONGITUDINAL TRAVEL - manual 20 24 30 36 20 24 30 36LONGITUDINAL TRAVEL - power feed 16Y2 20Y2 26 1 /2 - 16Y2 20Y2 26 1 /2 -CROSS TRAVEL 9 9 9 9 12 12 12 12-_. --­VERTICAL TRAVEL OF KNEE 16 16 16 16 16 16 16 16A OVERALL HEIGHT 75 75 75 75 75 75 75 75B OVERALL DEPTH 58% 58% 58% 58% 63 63 63 63C OVERALL WI DTH 65 1 /2 69 1 /2 75V2 8l1/2 65 1 /2 69 1 /2 75 1 /2 8l1/2-0MIN. DISTANCE V2 V2 1/2 1/2 1/2 1/2 Y2 1/2MAX. DISTANCE 20 1 4 20 1 4 20 1 / 4 20 1 4 20 1 4 20 1 4 20 1 ,4 20 1 ,4- -MIN. DISTANCE 0 0 0 0 0 0 0E0._­MAX. DISTANCE 12 12 12 12 12 12 12 12-­MIN. DISTANCE 7 1 /2 7V2 7V2 7V2 7V2 7 1 /2 7V2 7 1 /2FGMAX. DISTANCE 19 19 19 19 19 19 19 19--­MIN. DISTANCE 8 8 8 8 8 8 8 8MAX. DISTANCE 20 20 20 20 20 20 20 20MODEL "M" HEAD SPINDLE - No.2 Morse Taper;7 B&S Taper; or B-3 TaperSPEEDS, 1200 R.P.M. MOTOR 275 425 700 1050 2100 4250 COLLET CAPACITY - VB - 112SPEEDS, 3600 R.P.M. MOTOR 950 1350 2200 3250 6500 12000 QUILL TRAVEL - 3V211

Chrome Plated Ways -(Optional Feature)To maintain as far as possible the inherent accuracyand sensitivity of Bridgeport Millers, theexclusive feature of chrome plated ways is offered tousers of our machines.For a modest cost, Bridgeport can supply machineswhose ways are chrome plated at the points ofmaximum wear:• Back of Knee• Column Knee Gib• Top of Knee• Top of Saddle• Saddle Table GibChrome plate on these parts places a hard wearresistant surface on the paths of vertical, longitudinaland cross travel.A .002 deposit is made to assure ample wear life,an ideal lubricating surface and the lowest possibleco-efficient of friction. Hardness exceeds RockwellC-70. The chrome plate becomes an integral partof the base casting and does not set up anystresses or strains.To provide our customers, large or small with the mostversatile and flexible turret millers, Bridgeport hasdesigned and developed six working heads.These heads are supplied in a range of powers andcapabilities to handle most of the machining operationsrequired in any machine shop.All head models can be mounted on the front end of theram where they can be moved or swiveled to cover allplanes and angles in the spectrum.Models M, T and E can be mounted on the rearend of the ram and can beswung around to operate over the table.FEATURES COMMON TO ALL BRIDGEPORT HEADS• Self-contained, can be mounted on other machines.• Spindles are chrome nickel alloy, heat treatedand ground.• Spindle housings of high grade semi-steel castings.• Spindle bearings precision preloaded, accurately spacedfor maximum radial and thrust capacity.• Oil cup provides lubrication to all spindle bearings.• Dynamically balanced V belt pulleys proportioned forlong belt life, positive traction.• Simple adjustment of belt tension throughpivotally mounted motors.12

The Model "2J" 11/2 h.p. Variable Speed Drivecombines the accuracy and versatility of the wellknown model "J" with infinitely variablespindle speeds of 60 to 4200 RPM.It is equipped with power down-feed and up-feed.Angular positioning is obtained through anintegral worm and gear.The Model "2J" is designed for continuousduty in the vertical position, but can be modifiedfor continuous horizontal operation.Extreme sensitivity is provided by acounterbalanced quill and spindle.model2J1 "/2 h.p. variable speedmilling, drillingand boring headFEATURES• Infinitely variable spindle speeds of 60 to 4200 RPM.• Separate manual feed provides for rapid movement of quill,lever operated; slow movement by means of a hand wheel.• Positive quill lock.• Micrometer depth stop graduated in thousandths.• Equipped with reversible switch for right 1------8-------1 f-----C----Ior left hand operation.• Spindle drive is back geared for maximum use ofpower.• Positive two way power feed tripping mechanism.SPECIFICATIONS in inchesA OVERALL HEIGHT - 32B OVERALL DEPTH - 21% AC OVERALL WIDTH - 18POWER FEED per spindle rev. - .0015 .003 .006SPINDLE -R-8 taperCOLLET CAPACITY - %QUILL TRAVEL - 5SPINDLE SPEEDS infinitely variable from 60 to4200 RPM.Back Gear - 60 to 500 RPMDirect Drive - 500 to 4200 RPM14

The Model "J" is the workhorse of Bridgeport"s line ofheads. It has a combination of power and accuracyunmatched in any other make.It is equipped with power down-feed and up-feed.Angular positioning is obtained through anintegral worm and gear.The Model "J" is designed for continuous duty inthe vertical position, but can be modified forcontinuous horizontal operation.Extreme sensitivity is provided by acounterbalanced quill and spindle.modelJ1 h.p. milling, drillingand boring head-----8-------jI------C--------lFEATURES• Separate manual feed provides for rapid movementof quill, lever operated; slow movement by meansof a hand wheel.• Positive quill lock.• Micrometer depth stop graduated in thousandths.• Equipped with reversible switch for rightor left hand operation.• Spindle drive is back geared for maximum use ofpower.• Positive two way power feed tripping mechanism.SPECIFICATIONS in inchesA OVERALL HEIGHT - 27 1 4AB OVERALL DEPTH 19C OVERALL WIDTH 18POWER FEED per spindle rev. - .0015 .003 .006l7"12ISPINDLE -R-8 taperCOLLET CAPACITY - %QUILL TRAVEL - 5SPEEDS, 1800 R.P.M. MOTOR80 135 210 325 660 1115 1750 2720SPEEDS, 3600 R.P.M. MOTOR160 270 440 660 1320 2200 3600 544015

modelT"/2 h.p. cherrying headModel "T" cherrying head was designed and engineeredto meet the need for an economical method ofeliminating the time consuming hand work in die sinking.Small die work can be done effectively with the "TO,head mounted on a Bridgeport Turret Miller.This head has an oscillating quill which can move anordinary die sinking cutter through a circular path eitherconvex or concave to perform both rough and finishedcherrying operations. Radius is adjustable from 0 to 1%".A quill lock is supplied to lock the quill in a fixedposition when conventional milling work is called for.This head ca n be operated at right angles to bothcross and longitudinal travel of the table.SPECIFICATIONS in inchesA OVERALL HEIGHT - 27%AB OVERALL DEPTH20C OVERALL WIDTH 17%SPINDLENO.2 Morse Taper; 7 B&S Taper; or B·3 TaperCOLLET CAPACITY -V2SPEEDS, R.P.M.275 425 700 1050 2100 425016

modelc"/3 h.p. milling headModel "C" is a light duty milling head which givesaccurate performance in materials up to tool steel.This versatile unit will take cuts up to W".The B·3 collets furnished allow the use of double endmills.f4----8----1A--_/r5VaISPECIFICATIONS in inchesA OVERALL HEIGHT - 26B OVERALL DEPTHC OVERALL WIDTH 8%SPINDLE - B-3COLLET CAPACITY - 1/2SPEEDS, R.P.M.465 675 1000 1500 2140 425019

Shaping Tool SetFor use with Model E head. Consists ofseven shaped tools and threestandard tool bit holders.modelE"/3 h.p. verticalshaping head-"1":. .The model "E" vertical shaping head can perform alimitless variety of shapes using only standard tool bitholders and tools.It ca n be placed in a plane at right angles to thetable, or any vertical or compound angle desired.Strokes from zero to 4" can be dialed inincrements of 1/8 ".This head can be mounted on the rear end of theram of Bridgeport"s BRJ or BRM machine, to be readywhen a shaping job comes up.SPECIFICATIONS in inchesA OVERALL HEIGHT - 20 1 0/16B OVERALL DEPTH 177116C OVERALL WI DTHSTROKE - 4STROKES PER MINUTE70 100 145 205 295 4202"1aMIN.6"1aMAX.j20

The world"s NO.1 Miller didn"t get its reputation by beingthrown together. It takes time to build a Bridgeport right,and we don"t build them any other way. Why?Because every part must be accurate to Bridgeport"sstandard. Every part must be inspected and many arehand fitted. Without this special care the Bridgeportwould be just another miller. A Bridgeport is worth itswait in time, money and performance.

Each of the four attachments shown is an integralunit in itself. Cutter spindle and driving spindle aremounted in their own anti-friction bearings.Mounting on proper head is quick and simple.The attachments slip easily on the quill of the head.Driving spindle or shaft is tightened first; thenthe right-angle attachment clamping screw is tightenedto hold the unit firmly to the quill.No.1right-angle attachmentsfor model M headThese 90° attachments are designed to increase evenfurther the capacity and flexibility of theBridgeport equipped with a Model HM" milling head.They are used for horizontal milling, drilling, boringand reaming on light or awkward jobs.No.1 and 2 attachments are ideal for milling outpockets and cavities and for rough and finishmachining of small or unusual pieces.No.2SPECIFICATIONS in inchesA---;No.1 No.2 -2.563­A 3% 3%B 5Y16 6Y2C 1%2 2%2BD 3% 110/16E Ira 30/16COLLET NO. B-2 N-2COLLET CAPACITY 1/16 - 1/2 Y16- 1 4ESPEED REDUCTION 2 to 1 2 to 1M IN. WORKING SPACE 4 2%No.1No.224

To supplement the right-angle attachments listedelsewhere, Bridgeport has developed theQuillmaster attachment for use with the models M,T and J heads.The spindle housing swivels on a plane which is at a45 0 angle to the Quillmaster"s axis. This allows the"business end" of the Quillmaster to operate in anycompound angle from vertical to horizontal.Any corner with a small radius can be finish milled orcherried to a degree of sharpness not possible bya ny other method.For tool and die work the Quillmaster is a must.Moreover, its high speed allows the use ofsmall end mills.1/8" spring collet and 0/16" solid end mill holderavailable with the Quillmaster in addition to the 0/16"spring collet furnished.Type JAfor modelJ headQuillmaster attachmentfor models M, T and J headsType MAfor modelsM and T headsSPECIFICATIONS in inchesMAJAA 20/16 3% DB 9 9C 10/16 10/160 414 414BCOLLET CAPACITY - 3/1626

Bridgeport"s QRA attachment is a further expansionof the advantages of the Quillmaster. By providing aright-angle attachment for the Quillmaster, we havegiven the tool and die ma ker the last word inconvenience and flexibility.The QRA itself can operate in a confined space or holeonly 2 inches in diameter, and can operate effectivelywithin 1/2 inch of the wall of the workpiece. Itoperates with equal ease on the inside or outside ofirregularly shaped pieces or castings and is moreaccurate and sensitive than a dentist"s drill.The QRA attachment is a self contained unit,containing permanently lubricated bearingsand gear housing.QRA attachmentfor typesMA andJAQuillmasterSPECIFICATIONS in inchesA 1C 1%D 1COLLET CAPACITY - 0/16MINIMUM WORKING SPACE - 2Typical applications for the Quillmaster and the QRA attachment:27

l­ImeasuringattachmentThe Bridgeport measuring attachment is designedto provide the utmost accuracy in the coordinatelocation of holes. Its precision has been proven morethan satisfactory in a multiplicity of toolroom jobsall over the world.Accuracy is controlled entirely by end measures,inside micrometers and dial indicators.In use, the table and saddle are located separatelyby combinations of end measure for even inches, aninside micrometer for fractions of an inch, and a dialindicator reading for ten thousandths of an inch.When extremely precise operations are beingperformed, the conventional table and saddle locksare not used. Clamping is done by special reedtype clamps which do not transfer stresses tothese members.29

,,""11""""""--==-=====-=====--- --------OIMrNSIONS REAO 11"1 f(NTI-iSopticalmeasuringsystemThe Bridgeport Optical System is a quick, accurate,dependable method of locating machine worktables without danger of wear and consequentinaccuracy.In the Bridgeport system, no mechanical contact isinvolved, and there are no parts to be handled.Mathematical calculations are not required becausewith the Bridgeport Optical Measuring Systemfigures are read on the scale exactly as they appearon the working drawing. The operator is required onlyto read a single line which appears on an accuratescale calibrated every .010". Vernier estimatesare eliminated.Installation is quick and easy with the majority ofmounting holes already in place on standardBridgeport millers.Operation is trouble-free. Both the scale and theunit are sealed against foreign matter, andthe scales are permanently covered with glass.Distortion-free clamps keep sliding membersin position.FEATURES• Easily accessible setting knob.• Jump-proof table clamp.• Automatic light switch.• Catch fork system of direct digit reading.• Set up adjustment for even inches.• Sensitive parts sealed and protected.• Neoprene chip guard provided.SPECIFICATIONS in inchesLONGITUDINAL TRAVEL - 20CROSS TRAVEL - 9 or 12MAGNIFICATION - 17xREADING ACCURACY - .0001, directLATERAL ADJUSTMENT - 130

The coolant system for Bridgeportmachines is enclosed within thecolumn of the machine, using the baseas an oil or coolant reservoir. Coolantis supplied to the work piece or tablethrough a flexible hose and nozzle,and floods the working area through aflushing system. Bridgeport"s coolantsystem can be installed on newmachines or on those already in usevery easily through a door in thecolumn of the machine. In the lattercase it is supplied as a completepackage ready for field mounting.coolant systemsSpraymist Coolant Systems ...Spraymist directs a pressurizedmist of coolant where the toolcontacts the work and heat isgenerated. Heat is instantaneouslydissipated as the mist evaporates.Work finishes are improved, rejectsreduced ... no splash or spill onmachine, operator or floor.Spraymist makes possible operationof machines at higher speeds andfeeds for increased production.lubrication systemMetered Lubrication ...This lubricating system develops apressurized flow of oil that produces auniform film of lubricant on everybearing surface. The amount of oilsupplied to all bearings is preciselycontrolled to meet specificrequirements. This one-shotLubricating System can accuratelydeliver minute quantities of oil to onebearing ... while delivering muchgreater amounts to another. Theprecision operation of the systemassures proper lubrication with aminimum volume of oil.31

power feed unitThe power feed unit can easily beinstalled on any Bridgeport TurretMiller to give a selection of 12longitudinal table feeds from 9/16" to9Y16" per minute in geometricprogression. This unit is compact andself·contained, and can be mounted onexisting machines easily and quickly.The feed box is equipped with anoverload release which disengages thefeed when the tool is under unduestress. Once the load is released, thepower unit resumes operation. Thepower unit can be used on all tablesexcept the 48/1 model.----­ B -------110SPECIFICATIONS in inchesA OVERALL HEIGHT - 13 1 /2B OVERALL DEPTH 11%C OVERALL WI DTH 19VsFEEDS per minute9/16 % 151i.6 111

iser blocksBridgeport millers can be provided withriser blocks to extend the height rangeof the machines by either 4 or 7 inchesto accommodate unusually large pieces,or to raise the overall working area ofthe machine. These blocks are easilymounted to the column of the machinewith fou r bolts .• •cross travel stopThis is an adjustable attachment whichis used to limit the amount of travel ofthe saddle to predetermined distances.It can be mounted on either side of theknee and set at selected settings toobtain a positive stop. It can bemounted easily and quickly by tappingtwo holes each in the saddle andthe knee.This surface shouldbe parallel withtravel of sadd IeTap two%-16 holesin kneeAttachment may be mountedon either side of knee33

10"plainsine tableTo set, for example, 111/2° anglewith 10" Sine Table (Plain or Comb.)find sine of 111/2°, which is .19937.Multiply .19937 by 10 in simply movingdecimal point one step to the right.Result: Dim. B = 1.9937.Use gageblocks or similar tool 1.9937and place under Sine Bar of tablegiving a correct setting of 111/2°.SPECIFICATIONS in inchesWORKING SURFACE-111/2 x 12SHIPPING WEIGHT-80 Ibs.Specify 10" Plain Sine Tablewhen ordering.35

The 5" Sine Table is constructed withthe same features as the 10".It is a very rugged and sturdy set-updevice, still light enough to be handledvery easily by one man.5" combination sine table5"plain sine tableSPECIFICATIONS in inchesCombinationPlainWORKING SURFACE Horiz. 5 x 7 63;"ax 7WORKING SURFACE Vert. 3Y2 x 7SHIPPING WEIGHT 351bs. 301bs.Specify 5" Combination or 5" Plain Sine Table whenordering.To set, for example, 9 045" angle with5" Sine Table (Plain or Comb.) findsine of 9 045" which is .16935. Multiply.16935 by 5. Result: Dim. B = .84675.Use gage-blocks or similar tool .84675and place under Sine Bar of tablegiving a correct setting of 9 0 45".36

Bridgeport rotary tables are ruggedenough for the heaviest type ofproduction work, yet sensitive enoughfor precision tool work. Two models, 12and 15" diameters, will accommodatemost jobs found in the average shop.Table is of minimum height - 4 1 4" - topermit maximum tool clearance.Accuracy is within 30 seconds of arcthrough a complete rotation of thetable which is graduated each degree.An adjustable dial on the hand wheelreads directly to each minute. AVernier plate permits direct readingto within 5 seconds.rotary tablesSPECIFICATIONS in inchesRT-12RT-15A 4 1 4 4 1 4B 14 17C 1% 1%t---JI­ AC- l­i-­0 4 1 4 5%E % %MJ - ~ KF 7 9 /16 9 1 /16G 13 1 lfl6 14lfl6H 4% 4%57"a 5%J 12 15K 117"a 147"al 1 1 4 114M 8% 10GEAR RATIO 90:1HGr- -,l r-- -nIVN 1 1Right AngleMountingBracketHorizontal MountingRight Angle Mounting Bracketwith Dividing Attachment with Dividing Attachment and Dividing AttachmentTail Stock with Centers38

For hydraulic duplicating or wherever one or moreparts must be made from a single master, Bridgeporthas developed a 12" tandem rotary table. Thesetables can be flush mounted in tandem and driven bya hydraulic motor. Number of units is limited onlyby the capacity of the motor used. A commonshaft drives all tables, with the same accuracyobtained as with the regular model - 30 seconds ofarc through a complete rotation.These tandem tables are ideal for cam work or onoddly shaped pieces and will accommodate any partwhich can be rotated without interference.tandem rotary tablesSPECIFICATIONS in inchesMODELTRT-12r----B-----IAB12V8C 1%D2V2E %F 4%JG 12H 5J 111/ 8Kf-----B-------I-------------­ K --------------,~LM 6N 1GEAR RATIO 90:139

quick change toolsBridgeport, known the world over for accuracy andeconomy, introduces an improved system of quick changetools. One holder accommodates adapters for straightand taper shank drills, boring tools, reamers, end mills,flycutters, chucks and straight shank cutting tools.Bridgeport quick change tools are manufacturedto the same high standards which distinguishBridgeport Millers. They are available in a range ofsizes to handle most of the jobs found in a productionshop. See your Bridgeport Dealer for prices andcomplete specifications.• One holder accommodates all tool adapters.• Repetitive accuracy of spindle assured.• Machine flexibility increased.• Down time for tool change eliminated.• Tools can be hand tightened, wrench locked.• Solid taper fit eliminates tool chatter and drift.• Quick Change Holder of alloy steel,heat treated and ground.40

HOLDERquick change toolsCAT. NO.QJ-H for all quick change adaptersKEY WRENCHCAT. NO.QJ-50 for quick change holderKEY INCLUDED WITH HOLDERSTRAIGHT SHANK ADAPTERSCAT. NO. SHANK DIAM. CAT. NO.QJ-2 Va" QJ-I0QJ-3 0/16" QJ-llQJ-4 IA" QJ-12QJ-6 %" QJ-13QJ-8 \12" QJ-14SHANK DIAM.o/a"lY16"%"10/16""l"a"BORING HEAD ADAPTERCAT. NO.QJ-21 for #1 Bridgeport Boring HeadQJ-22 for #2 Bridgeport Boring HeadJACOBS CHUCK ADAPTERSCAT. NO. SIZE CAT. NO. SIZEQJ-23 #0 Taper QJ-28 #4 TaperQJ-24 #1 Taper QJ-29 #5 TaperQJ.25 #2 Taper QJ-30 #6 TaperQJ-26 #2 Short Taper QJ-31 #33 TaperQJ·27 #3 TaperTAPER SHANK ADAPTERSCAT. NO.QJ-33QJ-34QJ-35QJ-36TAPER SHANK#1 Morse#2 Morse#7 B&S#5 B&SFLYCUTTER ADAPTERCAT. NO.QJ-37 for both #3 and #4 Bridgeport FlycuttersSHELL MILL ADAPTERSCAT. NO. SIZE ARBORQJ-38 %"QJ-39\1/"CUTTING TOOLS NOT INCLUDED

Iboring headsBoring heads increase the flexibility of BridgeportMillers to include all types of boring jobs within therange Of the unit. Heads have a graduated dialfor direct reading of adjustment in thousandths.NO.1 Head accommodates %" diameter boring toolsand is adjustable from zero reading to %".NO.2 Head accommodates %" diameter borings toolsand is adjustable from zero reading to W".Boring head shanksSpecial shanks as illustrated are available forboth models of Bridgeport Boring Heads.All heads are supplied with necessary wrenches,mounting block and metal container. Boring headshanks are available in a variety of tapers.SPECIFICATIONS in inchesNo.1No.2A 2 1 4 3%B 114 1%C % H"16D Adjustment % V2E Size Tool Taken % %AD,oor/"\""" ,_,, ,,,,I \ ,1...~ "". ­ I"42

- - - - - - -----------------~...,-colletsfor Bridgeportattachments~--~~~~\Io...-__-===::::\:::::=~JI"R-B COLLETFor use with Model J and R heads, NO.3 Right-AngleAttachment. Holds tools from 1/8 through %"B-3 COLLETFor use with Model C and T heads. Holds tools from1/16 through 1/2".l" 10° Fill IY32~~~~~~(===]---r.3~ d~10·32 THO.N-2 COLLETFor use with Bridgeport No.2 Right-AngleAttachment. Holds tools from 1/16 through l/.t".NO. 7 B&S COLLETFor use with Model M and T heads. Holds toolsfrom 1/16 through V2".%·16 THO.B-2 COLLETFor use with No.1 Right·Angle Attachment. Holdstools from 1/16 through V2".NO, 2 MORSE COLLETFor use with Model M and T heads. Holds tools fromVI6 through 1/ 2".1.250"ll6·20 THO.NO. 16-S COLLETFor Model R milling head (old style). Holds tools fromV8 through %"43

shell mill arborsfor Shell End Mills..These arbors are for usewith the Model J head andare furnished withWrench for No.1 No.1 takes Shell Mills from 11,4 to 1 1 / 2 Bridgeport"s R-8 taper.Wrench for No.2 No.2 takes Shell Mills from 1% to 2Wrench for No.3 No.3 takes Shell Mills from 2114 to 2%threaded arborsfor Shell Mills or Milling Cutters with threaded holesThese arbors are supplied in two sizes, either left orright hand thread for angle milling cutters withthreaded holes. Smaller arbor ta kes 114" cutters;larger arbor ta kes 1%" cutters.47

stub arborsFor use with the Model J head, these arbors are for usein applications where the use of slitting saws, side millsor alternate tooth milling cutters are required. On gangjobs, it is suggested that the Bridgeport designed ArborSupport be used to obtain maximum rigidity. Arbors areheat treated and ground. Spacers are ground paralleland square with the bore of the spacer. All arborsare provided with wrench flats on the shoulders tofacilitate mounting or removal of arbor nut.SPACERS for use with Bridgeport Stub Arbors.SPECIFICATIONS in inches1.0. lengththreaddirectionA B C DSA-82 V2 %SA-83 V2 %6SAR-8 Right 6 V2 1% 2%2SA-I02 % 1/2SAL-8 Left 6 1/2 1% 2%2SA·I03 % 14SAR·lO Right 60/16 % 1% 31132 SA-124 % 2SAL-IO Left 6 5 1i6 % 1%31132 SA-122 % %SA-123 % 5/16SAR-12 Right 6% % 2 1 /8 1%2SA-144 ~8 2SAL-12 Left 6% % 2 1 /8 1%2SA-142 % %SAR-14 Right 6~8 1"8 2 1 4 1%2 SA-143 % 5/16SAL-14 Left 6% % 21;4 1%2 SA-164 1 2SA-162 1 %SAR-16 Right T%6 1 2 1 /2 1 11 132SA-163 1 51i6SAL-16 Left 70/16 1 2V2 llV32SA-204 114 2SAR-20 Right 70/16 114 2% 1 1 %2 SA-202 1 1 4 %SAL-20 Left 70/16 1 1 4 2% 1 15 /32 SA-203 1 1 4 %48t.949IG"----------­ --­R-8 TAPER16"-51"B

arbors____________ A_12501-:--c-­SPACERS for use with Bridgeport Arbors.SPECIFICATIONS in inchesI.D.lengthth readdirectionA B C DSAR-12-P Right 14 29 /32 % 9%2 1/2SAL-12-P Left 14 2 %2 % 9%2 1/2SAR-14-P Right 15 1 /32 1"8 9 13 / 32 lV16SAL-14-P Left 15 1 /32 1"8 9 13 / 32 1V16SAR-16-P Right 15%2 1 9 17 / 32 1V16SAL-16-P Left 15%2 1 9 1 1"32 11/ 16SAR-20-P Right 15 1 %2 114 9 2 V32 1V16SAL-20-P Left 15 1 %2 114 9 2 V32 1V16SA-124SA-122SA-123SA-144SA-142SA-143SA-164SA-162SA-163SA-204SA-202SA-203% 2% %% o/i61"8 21"8 %1"8 0/161 21 %1 5/ 161l,4 2114 %114 %fly cuttersThese cutters are designed for Bridgeport"s Model Jhead. Used with a NO.3 Shell Mill Holders theywill accommodate 0/16" square tool bits, singly or inpairs. Tool bits may be set at 5 degrees positiverake, 5 degrees negative rake or at zero rake. Theyare inserted in diametrically opposed broachedholes. Bodies are made of mild steel.SPECIFICATIONS in inchesFC 3FC 40­0/1.CU,tQJe0 sA 1% 1%B 3 4C 2% 3%pO0 SON49

hold down bolt and nut setThis handy set is in great demand by machinistswho operate Bridgeports. Set No. TNS-500 iscompact and comes in a sturdy metalcontainer with notched holes to allow mounting on ornear the machine.SPECIFICATIONS in inchesamount part thread lengthTN-l 4 STUD 1/2 - 13 3TN-2 4 STUD 1/2 - 13 4TN-3 4 STUD 1/2 - 13 5TN-4 4 STUD 1/2 - 13 6TN-5 4 STUD 1/2 - 13 7TN-6 4 STUD Y2 - 13 8TN-? 4 FLANGE NUT 1/2 - 13TN-8 4 NUT COUPLERS Y2 - 13TN-9 4 "T" SLOT NUT 1/2 - 13 11"16TN-lO 1 HOLDERTN-l2 4 STRAP CLAMPsize% x 1%6~lo/W~50

The VH-15 with a 15" (381mm) diameter platter is the largest rotary we offer. With a 8.5" center height it’s perfect for swinging large diameter parts up to just under 17" without the need of a riser. The motor is mounted vertically to reduce the footprint on your machine table. The spindle and worm both have two bearings to grant strong front and back support. The worm wheel is helically cut and throated for greater surface contact between the wheel and worm. The greater surface contact provides longevity and maintains the accuracy of the rotary over time. There is an optional 15" manual 3-Jaw chuck and adapter plate available as well as a manual or pneumatic tailstock with matching center height.

The Index Designs VH-15 is a true 4th-axis rotary table that comescomplete with compatible servo motor, and 9" extension cables ready to plug into you 4th-axis ready CNC machine.

For machines that are not 4th-axis ready: Add 4th-axis kit for each rotary table. Kit includes all parts necessary to make CNC machine 4th-axis ready. Prices vary by machine. Call for quote. Does not include installation.