drilling rig rotary table components supplier

Cameron rotary tables range from 27 1/2 in to 60 1/2 in and feature a large oil capacity that adds to the unit"s durability. The rotary table includes a forged-steel fabricated housing and a heat-treated forged-steel turntable. Each rotary table is supplied with spiral-bevel, induction-hardened gears and two independent ratchet-type locks, with lever access from the top to lock the table in position.

Explore the various drilling rig parts rotary table products available for wholesale at Alibaba.com. Get a drilling rig parts rotary table for drilling water wells, water exploration holes, geological exploration, coal mines, and other kinds of mining. Some drilling rig parts rotary table options use caterpillar tread to move. Others use rubber tires, while others require a separate means of transport. Caterpillar tread propulsion can climb up to 25 degrees inclination. Some products in the range are capable of drilling over 200 meters, while others are only used for open-pit mining with depths of around 3 meters. Drilling can be done vertically downwards, horizontally, or in a slanting direction. Drilling speed depends on the power of the machine and the general hardness of the surface. The hole diameter can vary from 90mm to 200mm.

drilling rig parts rotary table options also include an air compressor, a mud pump, drilling rods of various sizes, connectors, and a drilling tower. Drilling is done using drill bits of various shapes, sizes, and compositions. You can choose between diamond bits, alloy ring-shaped bits, 3-wing alloy bits, PDC bits, and hammer bits. Each drill bit uses different drilling methods, including rotary, percussion, blast hole, and core drilling.

Smaller products have a lifting power of around 25 kilonewtons and weigh about 2,500kgs. They’re ideal for small-scale drillings such as farms and homes. Larger ones are faster with more power, making them ideal for commercial use. Browse through Alibaba.com and find a drilling rig parts rotary table that’s ideal for your work scope. Buy mine drilling rigs for your wholesale business at competitive prices. Chinese wholesalers provide you with customization options and great after-sales services.

Rotary Tables - 37-1/2 IN. ROTARIES, FG-2A, 500 TON, 14 IN. - 2-3/8 IN. PIPE SIZES USE FOR TRIPPING AND CASING RUNNING. OPTIONAL HPCD AVAILABLE. ALL FG SERIES TOOLS ARE HYDRAULICALLY ACT... More Info

Rotary Tables - 49-1/2 IN. ROTARIES, FG-3A, 750/500 TON, 20 IN. - 2-3/8 IN. PIPE SIZES USE FOR TRIPPING AND CASING RUNNING. OPTIONAL HPCD AVAILABLE. ALL FG SERIES TOOLS ARE HYDRAULICALLY... More Info

Rotary Tables - DEN-CON 49-1/2 IN. HMB BUSHING, 750 TON RATING, AVAILABLE WITH A VARIETY OF INSERT BOWLS INCLUDING CONVENTIONAL API BOWLS, 500 TON BOWLS AND 750 TON BOWLS. More Info

Rotary Tables - 37-1/2 IN. - 49-1/2 IN. ROTARIES, FG-6B, 350 TON, 8-5/8 IN. & SMALLER WORKOVER RISER. PURPOSE BUILT POWER SLIP FOR HANDLING WORKOVER RISER WITH UMBILICALS. IDEAL FOR RENT... More Info

Rotary Tables - POWER SLIPS ARE AVAILABLE FOR 27-1/2 IN., 37-1/2 IN. & 49-1/2 IN. ROTARY TABLES. RATED CAPACITIES FROM 350 TONS TO 750 TONS. 27-1/2 IN. ROTARIES, FG-5A, 350 TON, 9-5/8 IN... More Info

Rotary Tables - ADAPTER RINGS - 750 TON - SOLID & SPLIT RINGS - DEN-CON 60-1/2 IN. X 49-1/2 IN. ADAPTER RINGS. ADAPTER RING OUTSIDE CONFIGURATION AND INSIDE CONFIGURATION CAN BE DONE FOR... More Info

Rotary Tables - ADAPTER RINGS - 750 TON - SOLID & SPLIT RINGS - DEN-CON 49-1/2 IN. X 37-1/2 IN. ADAPTER RINGS. ADAPTER RING OUTSIDE CONFIGURATION AND INSIDE CONFIGURATION CAN BE DONE FOR... More Info

This website is using a security service to protect itself from online attacks. The action you just performed triggered the security solution. There are several actions that could trigger this block including submitting a certain word or phrase, a SQL command or malformed data.

This website is using a security service to protect itself from online attacks. The action you just performed triggered the security solution. There are several actions that could trigger this block including submitting a certain word or phrase, a SQL command or malformed data.

Welcome to Pickett Oilfield’s rotary tables web page. Our company has been in the oil & gas drilling equipment industry for over 38 years, supplying new and used rotary tables and rotary equipment to customers in practically every producing region in the world. We are here to serve all your drilling equipment needs – if you don’t see it on this site, just give us a call or email. We can get it, if you need it!

Pickett Oilfield, LLC offers prospective buyers and extensive selection of quality new and used oil & gas drilling equipment, including rotary tables to choose from at competitive prices. Browse our inventory of rotary tables and rotary table drilling components for sale at competitive rates.

EC Tool’s drilling gear includes roller chains, draw-works, and many other items. We are happy to help you find the exact item you need, right down to the model. You can also request custom-made swivels, rotary table drawings, and more.

EC Tool specializes in the manufacturing and sales of oilfield drilling equipment and drilling rig packages. We supply the full line from SCR drive rigs to conventional and fast-moving rigs (truck-mounted, trailer-mounted, and skidding), drilling equipment, and rig accessories and parts.

A drillingmast is a construction over a well hole it supports the drilling equipment and all keep it lifted into and out of the well hole. ARK Drilling provides  variety of design, engineering, and manufacturing services for water and geothermal  drilling rigs masts.

Mast is one of the most important component of a rig. It must be stronger than components on board like drawwork. When we desing our masts we calculate static and hook loads for long term operation safety of drilling staff and rig. Our MS60 & MS50 & MS40 rigs masts are same which is max load capacity 70 ton and its made by 100*100*6mm square profile steel. Why we manufacture same mast for various capacity of these our drilling rigs. Its our priority safety of drilling staff and rig while and trouble at drilling operation like stuck the drill pipe. If a mast of rig is is very strong it gives confident to drilling crew.

This website is using a security service to protect itself from online attacks. The action you just performed triggered the security solution. There are several actions that could trigger this block including submitting a certain word or phrase, a SQL command or malformed data.

Supplying drill rig replacement parts has been the specialty of Drilling Supply and Manufacturing (DSM) since it first opened its doors in 1977. Today, it is not only known as a supplier of essential replacement parts, it is also known as a drill rig manufacturer and rebuilder.

“We manufacture and sell parts for Gardner-Denver, Mayhew, Midway and Badger drill rigs, and make custom parts for many other rigs,” Ken Young, DSM general manager, claims. Starting with 12 acres of land and just 3,750 square feet of building space in Austin, Texas, the company has grown to fill three buildings totaling 300,000 square feet. “We still have room to grow,” Ken adds, “but not much.”

In 1977, Young came to Austin to join forces with Palmer and Stanley Martin (father and son) to form DSM. Ken had been a partner and manager of the Midway Supply & Manufacturing in Odessa, Texas, (the manufacturer of Midway Drill Rigs) until he sold out in 1974. As a condition of the sale, he remained with Midway for three years after the change in ownership. At this point in his life, Ken considered a number of options in the drilling business before moving to Austin and forming a partnership with the Martin’s.

Palmer Martin began his career in the drilling business in 1945 and opened his own machine shop, Martin Machine Corp., in 1963. From 1963 to 1977, Palmer manufactured parts for Midway Supply & Manufacturing, where he dealt with Ken Young. Palmer’s son, Stanley Martin, began helping out at the family machine shop at the age of 13 and is today the general shop manager and consulting engineer for the company. “Designing drill rig parts and components is not an easy task, “Stanley notes.

DSM is active in the drill rig manufacturing business today, making and marketing the DSM Bob Cat 1000W, 1500W, and other custom rigs. DSM also manufactures rotary tables, Drawworks, PTOs, floating subs, slips, fishing tools and swivels.

“We do a lot of drill collar and cross-over sub work, too,” Ken says. “We make most of the parts right here in our own shop using special lathes and equipment. We make all of our own kelly bushing and slips. We have our own sand-casting molds, but have the casting done outside.”

Skilled employees are a key component of DSM’s success. “We employ a number of former drillers at DSM,” Ken explains. “Drillers make some of the best mechanics and parts people. They understand the needs of our customers whey they call needing replacement parts in a hurry. Parts people have to know a lot about drill rigs in order to locate the problem area and match up the parts for rigs of a given manufacturer and year model,” he adds. Ken’s son, Randy, is DSM’s parts manager. He’s also involved in outside sales.

In 1986, DSM dedicated a complete hydraulic parts and repair shop – DSM Fluid Power – to serve the needs of drill rig owners and operations. This shop maintains the largest hydraulic test equipment in central Texas.

On Dec. 12, 1991, DSM purchased the Mayhew/Gardner-Denver Water Well Division from Cooper Industries, which included all blueprints, patent rights and molds.

A rotary table is a mechanical device on a drilling rig that provides clockwise (as viewed from above) rotational force to the drill string to facilitate the process of drilling a borehole.

Most rotary tables are chain driven. These chains resemble very large bicycle chains. The chains require constant oiling to prevent burning and seizing.

Rotary Locks - Virtually all rotary tables are equipped with a rotary lock. Engaging the lock can either prevent the rotary from turning in one particular direction, or from turning at all. This is commonly used by crews in lieu of using a second pair of tongs to makeup or break out pipe.

The rotary bushings are located at the center of the rotary table. These can generally be removed in two separate pieces to facilitate large items, i.e. drill bits, to pass through the rotary table. The large gap in the center of the rotary bushings is referred to as the "bowl" due to its appearance. The bowl is where the slips are set to hold up the drill string during connections and pipe trips as well as the point the drill string passes through the floor into the wellbore. The rotary bushings connect to the kelly bushings to actually induce the spin required for drilling

Xi"an KINGWELL OILFIELD MACHINERY Co., Ltd. (KINGWELL)is a highly reputable supplier for oilfield equipment and services to Oil & Gas industries and provides complete solutions.

With over 10 years developing, we were developed from the beginning drilling service to manufacture factory who produce OCTG, DST tools and Solid control products.

Product&Reapir: Crown block(TC225 TC250 TC315 TC450 TC585), Travelling block(YC225 YC250 YC315 YC350 YC450 YC450S YC585), Hook(DG225 DG250 DG315 DG350 DG450 DG585 DG675), Rotary table(ZP175 ZP205 ZP275 ZP375 ZP975AS ZP495), Swivel(SL225 SL250 SL450 SL585), Drawworks(JC20 JC30 JC40 JC50 JC70B JC90DB), Mud pump (F-500 F-800 F-1000 F-1300 F-1600 F-1600HL F-2200 F-2200HL 3NB500C,3NB1000C 3NB1300C 3NB1600 SL3NB-1000 SL3NB-1300A SL3NB-1600A),BOP(FH,FZ,Cameron,Shaffer), Control System for Surface Mounted BOP Stacks(FKQ,FKDQ),Disc brake (PS,PSZ, DBS), Bladder accumulator (NXQ), Drilling rig(ZJ40/2250DZ ZJ50/3150DZ ZJ70/4500DZ ZJ90/6750DZ), Workover rig (XJ40,XJ60, XJ80,XJ100,XJ12,ZJ15,ZJ20,ZJ3,XJ350, XJ450, XJ550,XJ650,XJ750), BPM Top drive((DQ120BSC, DQ90BSD, DQ90BSC, DQ80BSC, DQ70BSD, DQ70BSE, DQ70BSC, DQ50BC, DQ40BC, DQ40BSG, DQ40BCQ, DQ40YR, DQ30Y) Make: Bomco, Lanzhou LS,LSPE, SJ Petro, RG Petro, Sichuan Honghua, CPTDC, Beijing BPM, Shanghai Shenkai, Kingdream, CCDC, SJS Serva, DFXK, LS-NOV, Beijing PSK, Gold basin, Renqiu Boke,Guangdong Dongsu.(Guangshi), XBSY.,Tiehu, Rongsheng (HBRS), TSC. Replacements:Mission magnum/Halco centrifugal pump, Cameron FC gate valve,Cameron R check valve, Demco mud valveE( 3K&5K ), Demco butterfly valve,BJ varco handling tools (SDXL, SDML, SDS,DCS,SSC,SSD,YT, HYC, LYT, MP,MYT, MG, RGG, HGG, MGG, TA, SJ), MI SWACO / Mongoose / Derrick / /Brandt / King cobra shale shaker screen (FLC2000,FLC503,Derrick 626), M/D & OTECO Gauge(Type F,Type D,Model 6,Model 7,Model 8), Twin disc,WPT, Eaton clutch & friction disc, National (10-P-130,12-P-160 ,14-P-220 ,8-P-80 ,9-P-100), Gardner denver (PZ-7,PZ-8,PZ-9,PZ-10,PZ-11), EMSCO FB1600.International Brand: Moog, CCS, ATOS, Rexroth, Eaton, Flowrox, Italvibras, Martin, Norgren, Parker, Siemens, Vickers, 3M.Standard:API Spec 4F, API Spec 6A,API Spec 6D,API Spec 600, API Spec 7K, API Spec 8A, API Spec 8C,API Spec 16A, API Spec 16C, API Spec 16D

Depending on the size of your drilling pipes, Forum offers clamp types C, T, CXL and AMP to ensure a perfect fit while making-up or breaking-out the string.

NOV Rotary Table RST375，RST495，RST605 ,37.5 Inch Rotary Tables,12 Inch Rotary Tables,17.5 Inch Rotary Tables,20.5 Inch Rotary Tables,23 Inch Rotary Tables,27.5 Inch Rotary Tables,49.5 Inch Rotary Tables

The rotary motion and power are transmitted through the kelly bushing and the kelly to the drill string. Almost all rigs today have a rotary table, either as primary or as a support system for rotating the drillstring.

dhparts.com provide drilling equipment including all types of driving drilling rigs and components (1000HP up to 3000 HP), relating to 1,000-7,000 meters mechanical driving, DC driving, frequency conversion and compound driving. Other models of drilling rigs are as follow :

The equipment and components include Drilling Rigs Crown Block Line Lock Sub Structure VFD House Mud Circulating System Derrick Lift Group Generator House Draw Works Line Drawing/Casting Machine,Sub Driller＇s House,Tool HouseDerrick Traveling Block Driller＇s Contrlo Room Normal sized(traveling beam)Pumping Unit Rotary Table F Series Mud Pump Oil Production Machinery Equipment Wellhead Tools Oil field piping system Truck-Mounted Drilling Rig & Workover rig which fromBomco,Baoji oilfield,Lanzhou LS,NANYANG RG PETRO,SICHUAN HONGHUA,SJ PETRO,SHANGHAI SHENKAI,BEIJING BPMF,PSK,GOLD BASIN,DONGSU,RENQIU BOKE,and products meet API 6A,16A,16C,16D,7K,8C,7-1,4F,6D etc.