excitron rotary table pricelist

2023-05-21 21:22:12

Use these rotary tables for all kinds of heavy machining and precision turning, capable as a 4th axis. Great for ultra-precise applications such as laboratory, production part rotation, inspection, indexing to precise angles, laser marking, angular testing and measurements. The intelligent programmable controller is integrated with motor--no messy wires.

Robust as a stand-alone unit with several modes to automate your rotation and indexing, and can be controlled by other CNC controllers. Excellent repeatability due to the ground worm gears. The table top center bearing is extremely precise: concentricity error is less than .0004 inches, typically as small as .0002 inches. This gives you ultra center positioning, and makes your parts very round.

Includes NEW DRO Digital Readout display, mounted on motor, no wires. See where your table top is positioned, makes your operation incredibly wonderful! Gives you instant display of Position (steps and decimal degrees), Voltage, temperature, number of cycles, RPM, encoder status, gear ratio, steps/rev, steps/degree, and current Motion Profile. You can connect a smart phone or PC, using the USB adapter we give you. 2 nice methods:

excitron rotary table pricelist

Includes NEW DRO Digital Readout display, mounted on Base, no wires. See where your table top is positioned, makes your operation incredibly wonderful! Gives you instant display of Position (steps and decimal degrees), Voltage, temperature, number of cycles, RPM, encoder status, gear ratio, steps/rev, steps/degree, and current Motion Profile. You can connect a smart phone or PC, using the USB adapter we give you. 2 nice methods:

excitron rotary table pricelist

The problem is in the equipment being too delicate to handle. He may have cutting edge technology. But, his asking price for this equipment is not worth the support that he gives, which is very little, if any... He makes claims that he has the very best! But, for the support he offers is not worth the money you pay. I had purchased five(5) motors from his company Excitron.com, for approximately $5,000.00. Once, he received the monies, and had sent the motors. You were pretty much on your own, after that! There"s very little support if any! He says "All is F. O. B. To which you are responsible for." He will not take responsibility for his actions on the flaws of his equipment, he would rather spend time building a list on all the things you had said, and correcting you on all the miss spellings you had made, and/or second guesses you on your thoughts or grammar, then lays blame on you!

Update: I had dismantle all of Excitron"s motors from my CNC machine. Two of the motors were attached to turntables. And, had to discard one turntable. The other had to be modified, and refitted. All motors have been replaced with inexpensive motors shipped in from China! They work very efficiently, and have had 90% savings in costs! Unfortunately, this has been a very expensive lesson for me, and now, I have no use for Excitron motors...

excitron rotary table pricelist

Excitron excels in designs using their stepper motors and integrated controllers. They make it as simple as possible for you to create your own robotic automatic machine or product.Integrated Motors and Controllers

Excitron"s precision motorized rotary tables for heavy duty machine work, rotating platforms, rotary actuators, and robotic positioning are great for low speed, huge torque, massive loads, and excellent angular positioning.

Excitron excels in designs using their stepper motors and integrated controllers. They make it as simple as possible for you to create your own robotic automatic machine or product.

excitron rotary table pricelist

Stelron RD-1-24P-90-RH-LK-M Position Index Table T170691 - Semiconductor & PCB Equip. Racks, Mounts, & Patch Panels. Signals & Source Generators. STEP MOTORS. Power Supplies. Electric/Motors/Breakers/Power. Tool & Machine Components. Warranty Information.

Metal Work Table w Rack Organizer 57 X 23 X 63 IN T186405 - Radiation Testers. Tool & Machine Components. STEP MOTORS. Reference Number. Warranty Information. Product Information. Network Analyzers. Electric/Motors/Breakers/Power.

Tsudakoma RC-500 Rotary Table - 43.0000 x51.0000 x28.0000. Reference Number. Made In Japan. Warranty Information. Product Information. STEP MOTORS. Electric/Motors/Breakers/Power. Racks, Mounts, & Patch Panels.

HV6" precision Horizontal & Vertical 3 slot Rotary Table USA Rahistools - 6" precision Horizontal & Vertical 3 slot Rotary Table ISO9001 Part#TSL150 New. PRECISION 3 slot ROTARY TABLE /HORIZONTAL&VERTICAL - NEW. Graduated 360 degree around its circumference and driven by precision gear with 1:90 reduction ratio.

CDS 315 Large Industrial Indexing and Transfer Table 12 Positions/Stops - Tool & Machine Components. STEP MOTORS. Reference Number. 230/460 V. Checked out OK. Warranty Information. Product Information. Logic Analyzers.

3"" 80 mm Rotary Table With 65mm 3 Jaw Chuck & Back Plate + T-nuts-Ship From USA - 3"/ 80 MM SMALL MILLING ROTARY TABLE WITH 65 MM 3 JAW CHUCK & BACK PLATE + FIXING TNUTS BOLTS (WITH 65 MM 3 JAW SELF CENTERING). THE ROTARY TABLE AND CHUCK ASSEMBLY CAN BE MOUNTED BOTH HORIZONTALLY & VERTICALLY.

Sopap TS7 200-2-300-3-D Rotating Indexing Table 2 Positions T91592 - This is a used item and has been checked for basic functionaly. 18.0000 x14.0000 x12.0000. Reference Number. Warranty Information. Product Information. STEP MOTORS. Electric/Motors/Breakers/Power. Racks, Mounts, & Patch Panels.

4"" 100mm Tilting Rotary Table With Chuck, Back Plate & T-nuts - Ship From USA - PRECISION QUALITY 4"/ 100 MM TILTING MILLING INDEXING ROTARY TABLE WITH SMALL CHUCK, BACK PLATE & FIXING T NUTS BOLTS. PRECISION QUALITY 4" /100 MM TILTING ROTARY MILLING INDEXING ROTARY TABLE. SUPPLIED WITH A 65 MM 3 JAWS SELF CENTERING SMALL CHUCK WITH BACK PLATE & FIXING T NUTS BOLTS.

Edmunds CGC-5791, DG-6843 Table Top Unit T79586 - Semiconductor & PCB Equip. Racks, Mounts, & Patch Panels. Tool & Machine Components. Signals & Source Generators. STEP MOTORS. Reference Number. Warranty Information. Product Information.

16DFF-20244L2-HR2W1 CNC Index Table - Semiconductor & PCB Equip. Racks, Mounts, & Patch Panels. STEP MOTORS. Power Supplies. Electric/Motors/Breakers/Power. Tool & Machine Components. Reference Number. Warranty Information.

Nice! Yuasa 12" Horizontal Rotary Table - #550-112 - Made in Japan by Yuasa International. This is a 12" Horizontal Rotary Table. Table Rotation: 360 degrees. Table Height: 5.31". Center Bore: #4 Morse Taper.

Clean! Yuasa 10" Horizontal / Vertical Rotary Table - #550-050 - Made in Japan by Yuasa International. This is a 10" Horizontal / Vertical Rotary Table. Swing: 13". Table Height in Horizontal Position: 4.53". Center Height in Vertical Position: 6.50". Table Rotation: 360 degrees.

Tilting Rotary Table 4 Slots 3" Inches 75mm for Milling Metalworking USA FULFILL - ROTARY TABLE 3" (4 SLOTS) TILTING. Table tilts up to90 degree and can be used anywhere in between and locked. The table is graduated0-360 degree in5 degree divisions.

M6 14 Pcs Clamping Kit Set Suitable For Rotary Table Hv4 & Hv6 - These Clamping Kits is used with our Rotary Tables to clamp on the Machine Table. BLOCK SIZE :-. Length Of Block : 1-1/2". Hole Of Clamp : 5/16". Width Of Block : 1". Height Of Block : 1". These are Polished and Ground from all the Sides.

4th 5th Rotary Axis CNC Dividing Head A/B/C Axle 10:1 Harmonic Reducer Gearbox - Rotary Axis CNC Dividing Head. The 4th axis engraving machine, the 5th axis. The fifth axis (C axis) reduction ratio: 10: 1 (86 NEMA 34 two phase 4-wire 2A stepper motor). The fourth axis (A axis) reduction ratio: 10: 1 (86 NEMA 34 two phase 4-wire 4.5A stepper motor).

3"/ 80 Mm Rotary Table + 65 Mm 3 Jaw Chuck & Back Plate + T Nuts (Usa Fulfilled) - 3"/ 80 MM SMALL MILLING ROTARY TABLE WITH 65 MM 3 JAW CHUCK & BACK PLATE + FIXING TNUTS BOLTS (WITH 65 MM 3 JAW SELF CENTERING). THE ROTARY TABLE AND CHUCK ASSEMBLY CAN BE MOUNTED BOTH HORIZONTALLY & VERTICALLY.

4"/ 100 Mm Tilting Rotary Table + Small Chuck, Back Plate & T Nuts-Usa Fulfilled - PRECISION QUALITY 4" /100 MM TILTING ROTARY MILLING INDEXING ROTARY TABLE. 4"/ (100 MM) Tilting Rotary Table:-. SUPPLIED WITH A 65 MM 3 JAWS SELF CENTERING SMALL CHUCK WITH BACK PLATE & FIXING T NUTS BOLTS.

Bellpony NPO12 Rotary Index Table w HC-MF23 AC Servo Motor T190398 - Semiconductor & PCB Equip. Racks, Mounts, & Patch Panels. STEP MOTORS. Power Supplies. Electric/Motors/Breakers/Power. Tool & Machine Components. Reference Number. 1.5 amp 3ac.

Mitsubishi HG-MR23 AC Servo Motor w Bellpony Rotary T193263 - STEP MOTORS. 14.0000 x11.0000 x7.0000. Reference Number. Warranty Information. Product Information. Tool & Machine Components. Electric/Motors/Breakers/Power. Racks, Mounts, & Patch Panels.

Mitsubishi HC-MFS23 011801 AC Servo Motor w / Bellpony Rotary Gear T175335 - STEP MOTORS. 10.0000 x14.0000 x7.0000. Reference Number. 3AC 120V 1.5A 3000R/Min. Warranty Information. Product Information. Tool & Machine Components. Electric/Motors/Breakers/Power.

3-piece non-scratching plastic jaws for 80mm Rotary Axis Chuck for rings - I make these jaw sets in the following colors If no color is specified, I will send out one of the above colors.

3-piece non-scratching plastic jaws for 80mm Rotary Axis Chuck - I make these jaw sets in the following colors If no color is specified, I will send out one of the above colors.

Walter type RTS 400 GA Rotary Table indexing tilting. 15.75" Table Diameter - Walter type Rts 400 GA Rotary Table indexing tilting. Excellent condition. Used in inspection department, includes Parallels. Will ship freight. About 600 lbs.

1 SIDED INDEX PLATE 1 - 1/4"x 6-1/4" dividing head indexer rotary table spacer. - 1 SIDED INDEX PLATE 1 - 1/4" x 6-1/4" dividing head indexer rotary table spacer 15,18,20,23,27,31,37,41,47 Message me to combine shipping on multiple purchases. Shelf 7

2 SIDED INDEX PLATE 1 - 1/8" x 5" dividing head indexer rotary table spacer. - 2 SIDED INDEX PLATE 1 - 1/8" x 5" dividing head indexer rotary table spacer. 21,23,27,29,31,33 Shelf 6 Message me to combine shipping on multiple purchases.

2 SIDED INDEX PLATE 1 - 1/8" x 5 dividing head indexer rotary table spacer - 2 SIDED INDEX PLATE 1 - 1/8" x 5 dividing head indexer rotary table spacer. Some wear. 37,39,41,43,47,49 Shelf 5 Message me to combine shipping on multiple purchases.

2 SIDED INDEX PLATE 1" x 4-7/8" dividing head indexer rotary table spacer. - 2 SIDED INDEX PLATE 1" x 4-7/8" dividing head indexer rotary table spacer.. 21,23,27,29,31,33 Shelf 4 Message me to combine shipping on multiple purchases.

2 SIDED INDEX PLATE 1" x 4-7/8" dividing head indexer rotary table spacer - 2 SIDED INDEX PLATE 1" x 5" dividing head indexer rotary table spacer. 37,39,41,43,47,49 Shelf 3

2 SIDED INDEX PLATE 1 - 1/8" x 5 dividing head indexer rotary table spacer - 2 SIDED INDEX PLATE 1 - 1/8" x 5 dividing head indexer rotary table spacer. 37,39,41,43,47,49 One side shows wear at 37 & 39 Shelf 2

2 SIDED INDEX PLATE 1 - 1/8" x 5" dividing head indexer rotary table spacer. - 2 SIDED INDEX PLATE 1 - 1/8" x 5" dividing head indexer rotary table spacer.. 21,23,27,29,31,33 Shelf 1 Message me to combine shipping on multiple purchases.

Three Chuck Rotary Worktable 69/80/100 Fixture Gripper Co2 Fiber Marking Machine - Application: Fiber & Co2 Laser Marking Machine. Application 2: Ring Marking / Cup Marking. Motor: Cloudray Nema 23 Motor. Model Number: D69A/D80A Type.

Milling Indexing 4"/ 100 Rotary Table M6 Clamp Kit & Small Chuck (Usa Fulfilled) - MILLING INDEXING 4"/ 100 ROTARY TABLE M6 CLAMP KIT & SMALL CHUCK. Quality Tool Set of 4" Regular Rotary Table with a (65 mm 3 jaws Self Centering Chuck) and (70 mm 4 jaw Independent chuck) with Back Plate & fixings T nut Bolts & M6 clamp kit.

4"/ 100 Rotary Table + M6 Clamp Kit & Small Chuck (Usa Fulfilled) - Quality Tool Set of 4" Regular Rotary Table with a 70 mm 4 Jaws Independent Chuck or 65mm 3 Jaws Self Centering chuck or 65mm 4 Jaws Self Centering chuck with Back Plate & fixings T nut Bolts & M6 clamp kit.

Tailstock Suitable For Rotary Tables 4" & 6" - New Hv4 & Hv6 - IT IS USED ON OUR HV4 & HV6 ROTARY TABLE. THESE ARE ADJUSTABLE FOR DIFFERENT HEIGHTS & HAVING FINE FEED CENTER POINT AND THE CENTER TIP IS HARDENS AND GROUND. Custom Policy Hurry Up !

Milling Indexing 4"/ 100 Rotary Table With M6 Clamp Kit & Chuck (Usa Fulfilled) - INDEXING 4"/ 100 ROTARY TABLE WITH M6 CLAMP KIT & CHUCK. Quality Tool Set of 4" Regular Rotary Table with a 65mm 3 jaw self centering chuck and 70 mm 4 Jaws Independent Chuck with Back Plate & fixing T-nut Bolts & M6 clamp kit.

Rotary Table 3" / 80 mm Horizontal & Vertical Model Precision High Quality - Rotary Table 3" / 80 mm Horizontal & Vertical Model Precision High Quality MINI ROTARY TABLE 3" / 75MM - HORIZONTAL & VERTICAL. NEW 3" / 75 MM ROTARY TABLE. Operates in the Horizontal or Vertical position.

Camco 663RAD24H32-270 Rotary Table Indexer T178011 - 18.0000 x18.0000 x10.0000. Reference Number. Warranty Information. Product Information. STEP MOTORS. Electric/Motors/Breakers/Power. Racks, Mounts, & Patch Panels. Networking & Communications.

Camco 902RDM-32H32-180 Rotary Indexing Table 32 Positions T174567 - 28.0000 x28.0000 x14.0000. Reference Number. Tested Good. Warranty Information. Product Information. STEP MOTORS. Electric/Motors/Breakers/Power. Racks, Mounts, & Patch Panels.

Camco R-250 Indexing Rotating Table 32 Stations Ratio 40:1 T122599 - 26.0000 x24.0000 x14.0000. Reference Number. Warranty Information. Product Information. STEP MOTORS. Electric/Motors/Breakers/Power. Racks, Mounts, & Patch Panels. Networking & Communications.

30-Position Rotating Indexing Table 34 In Dia - Signals & Source Generators. STEP MOTORS. Power Supplies. 3-1/2" spacing between each position. Electric/Motors/Breakers/Power. 1 turn gear/position. This is a used item and has been checked for basic functionaly.

Autorotor T 25 02 300 2 Position Rotating Indexing Table T96178 - Hard to rotate input shaft. Bot shafts are 24 mm. Signals & Source Generators. STEP MOTORS. Power Supplies. Electric/Motors/Breakers/Power. This is a used item and has been checked for basic functionaly.

Camco R250 Rotary Index Drive Table 32 Positions T176773 - Semiconductor & PCB Equip. Racks, Mounts, & Patch Panels. Tool & Machine Components. STEP MOTORS. Power Supplies. Electric/Motors/Breakers/Power. Tested Good. Warranty Information.

PCI100T3120MSR15 0200569 4 Stations Indexer Rotating Table for Toyo Jamco - 14.0000 x14.0000 x18.0000. Reference Number. Unit was manually tested and turns properly. Warranty Information. Product Information. STEP MOTORS. Electric/Motors/Breakers/Power. Racks, Mounts, & Patch Panels.

Manifold Indexing 12-270 Sx-90 Rotating Table T10812 - Physical Condition : Fair (Item shows heavy wear). This is a used item and has been checked for basic functionaly. 40.0000 x40.0000 x27.0000. Reference Number. Warranty Information. Product Information.

Ferguson, Flex-In-Line 9628510-001-1, 1X02 140, R200 Rotary Index, Indexing Tabl - Semiconductor & PCB Equip. Racks, Mounts, & Patch Panels. STEP MOTORS. Power Supplies. Electric/Motors/Breakers/Power. Tool & Machine Components. Reference Number. Warranty Information.

I&J Fisnar RT-Flex II Rotary Dispensing Table - I&J Fisnar RT-Flex II Rotary Dispensing TableGreat ConditionEverything that is pictured will be included.Local pickup is preferred. We are Located in South Gate, CA.Shipping available at the expense of the buyer.Shipped items are packaged to ensure they reach their destination with zero damage.Please feel free to ask any questions regarding this item/shipping. We will respond as soon as possible.Thank you!

Vintage Small National Rotary Table Machinist Tool Jig Fixture - USED, OLD ROTARY TABLE. THE TABLE HAS GOOD RESPONSE TO THE TURNING OF THE HANDLE. THE GEAR CAN BE RETRACTED. THE AREA FOR RETRACTING THE GEAR NEEDS TO BE OILED. NO CRACKS OR REPAIRS. THERE ARE SCUFFS, SCRATCHES AND WEAR FROM USE.

Yuasa 550-048 8" Horizontal & Vertical Rotary Table - YUASA 550-048 8" HORIZONTAL & VERTICAL ROTARY TABLE. Everything that is pictured will be included.Local pickup is preferred. We are Located in South Gate, CA.Shipping available at the expense of the buyer.Shipped items are packaged to ensure they reach their destination with zero damage.Please feel free to ask any questions regarding this item/shipping. We will respond as soon as possible.Thank you!

Rotation Axis Fiber Laser Marking Machine Rotary Chuck Rotary Shaft Driver 80mm - 80mm Rotation Axis for Fiber Laser Marking Machine Rotary Chuck Rotating Shaft (With Driver). - Size: Chuck Size 80MM. 1X 80mm Rotating Shaft. Mainly used for laser marking machine,laser welding machine,laser engraving machine.You can also mark cigarette holders,pens,bearings,hardware,etc.

New 4" Inches (100 mm) Tilting Rotary Table (4 Slots) for Milling, Metalworking - Rotary Table Tilting 4"/100 mm 4 Slots. The Rotary Table can be tilting upto 90 degrees. Table surface has 4 Radial T Slots for 8mm T Nuts. Winding Handle is Graduated 0 – 10 in 5 min divisions. This relatively low height increases the working capacity for machines.

KALANJARI 4" Inch Precision Tilting RotaryTable 4 Slots for Milling Metalworking - ROTARY TABLE 4" (4 SLOTS) TILTING. · · Table tilts up to90 degree and can be used anywhere in between and locked. MADE IN INDIA.

4" Inch Precision Tilting Rotary Table 4 Slots 100mm for Milling Metalworking - ROTARY TABLE 4" (4 SLOTS) TILTING. · · Table tilts up to90 degree and can be used anywhere in between and locked. The table is graduated0-360 degree in5 degree divisions. MADE IN INDIA.

Tilting Rotary Table 4 Slots 100mm, 4" Inch Precision for Milling Metalworking - ROTARY TABLE 4" (4 SLOTS) TILTING. · · Table tilts up to90 degree and can be used anywhere in between and locked. The table is graduated0-360 degree in5 degree divisions. MADE IN INDIA.

KALANJARI 3" Inch Precision Tilting RotaryTable 4 Slots 75mm for Milling Machine - ROTARY TABLE 3" (4 SLOTS) TILTING. GOOD QUALITY WITH BEST PRICE. Table tilts up to90 degree and can be used anywhere in between and locked. MADE IN INDIA. Overall Height :2-3/8 ″ (60 mm).

3" Inch Precision Tilting Rotary Table 4 Slots 75mm for Milling Machine - ROTARY TABLE 3" (4 SLOTS) TILTING. Table tilts up to90 degree and can be used anywhere in between and locked. The table is graduated0-360 degree in5 degree divisions. GOOD QUALITY WITH BEST PRICE. MADE IN INDIA.

Tilting Rotary Table 4 Slots 75mm, 3" Inch Precision for Milling Machine - ROTARY TABLE 3" (4 SLOTS) TILTING. Table tilts up to90 degree and can be used anywhere in between and locked. The table is graduated0-360 degree in5 degree divisions. GOOD QUALITY WITH BEST PRICE. MADE IN INDIA.

100 mm / 4" Inches Horizontal Vertical Rotary Table 4 Slots for Milling Machine - 100mm 4 Milling Slots. Rotary Tables 4 ″ (100 mm). Vertical Center Height 2-1/16 ″ (Approx. Hand Wheel can be set to zero. Hand Wheel graduated in 10 min divisions. GOOD QUALITY WITH BEST PRICE. Can be used both Horizontally & Vertically. ).

KALANJARI Horizontal & Vertical Rotary Table Table 4" Inch 100mm 4 Milling Slots - 100mm 4 Milling Slots. Rotary Tables 4 ″ (100 mm). Vertical Center Height 2-1/16 ″ (Approx. Hand Wheel can be set to zero. Hand Wheel graduated in 10 min divisions. MADE IN INDIA. Can be used both Horizontally & Vertically. ).

Horizontal Vertical Rotary Table 4" Inches (100 mm) 4 Slots for Milling Machine - 100mm 4 Milling Slots. Rotary Tables 4 ″ (100 mm). Vertical Center Height 2-1/16 ″ (Approx. Hand Wheel can be set to zero. Hand Wheel graduated in 10 min divisions. GOOD QUALITY WITH BEST PRICE. Can be used both Horizontally & Vertically. ).

KALANJARI 3” Inch Rotary Table 80mm Horizontal & Vertical Low Profile - 3" ROTARY TABLE HORIZONTAL / VERTICAL WITH 4 MILLING SLOTS. Can be used in bothHorizontal & Vertical position. Table Dia. :3-1/8" (80 mm). Table Slots :4. Table Height :1-5/8" (44mm). GOOD QUALITY WITH BEST PRICE.

3” Inch Rotary Table 80mm Horizontal & Vertical Low Profile With 4 Milling Slots - 3" ROTARY TABLE HORIZONTAL / VERTICAL WITH 4 MILLING SLOTS. Table Slots :4. Can be used in bothHorizontal & Vertical position. Table Dia. :3-1/8" (80 mm). Table Height :1-5/8" (44mm). GOOD QUALITY WITH BEST PRICE.

Horizontal & Vertical Low Profile With 4 Milling Slots, 3” Inch Rotary Table - 3" ROTARY TABLE HORIZONTAL / VERTICAL WITH 4 MILLING SLOTS. Table Slots :4. Can be used in bothHorizontal & Vertical position. Table Dia. :3-1/8" (80 mm). Table Height :1-5/8" (44mm). GOOD QUALITY WITH BEST PRICE.

BACK PLATE FOR ROTARY TABLESDIA 125 MM- RECESS 95 MM-USA Fulfilled - RECESS IS 95 MM. 3 x 8 MM THREADED DRILLS TO MOUNT A 3 JAW CHUCK & M8 COUNTER BORED TO ATTACHED THE BACK PLATE WITH THE ROTARY TABLE"S T SLOT. SUPPLIED WITH 3 X T NUTS + BOLTS AS PER BACK PLATE "S SIZE.

Industrial 80 mm Stepping Laser Rotation Axis Shaft Engraver Attachment Fixture - Drive Mode:Stepping. 80mm Laser Rotation Axis F/ Fiber Laser Marking Machine Engraving Rotary Shaft. 80mm Rotation Axis Fiber Rotary Chuck Rotary Shaft for Laser Marking Machine. Mainly used for laser marking machine,laser welding machine,laser engraving machine.You can also mark cigarette holders,pens,bearings,hardware,etc.

80 mm Rotation Shaft Stepping Driver Fiber Laser Marking Machine Rotation Axis - 80mm Laser Rotation Axis F/ Fiber Laser Marking Machine Engraving Rotary Shaft. Drive Mode:Stepping. 80mm Rotaion Axis Fiber Rotary Chuck Rotary Shaft for Laser Marking Machine. Mainly used for laser marking machine,laser welding machine,laser engraving machine.You can also mark cigarette holders,pens,bearings,hardware,etc.

Manufacturing 80mm Laser Machine Rotary Engraver Attachment Laser Rotation Axis - 80mm Rotaion Axis Fiber Rotary Chuck Rotary Shaft for Laser Marking Machine. 80mm Laser Rotaion Axis Shaft Fiber Laser Marking Machine Engraving Rotating Fixture (With Stepping Driver). - Size: Chuck Size 80MM.

Fiber Laser Marking Machine 80mm Rotation Axis Rotary Chuck Rotary Shaft Driver - 80mm Rotation Axis for Fiber Laser Marking Machine Rotary Chuck Rotating Shaft (With Driver). - Size: Chuck Size 80MM. 1X 80mm Rotating Shaft. Mainly used for laser marking machine,laser welding machine,laser engraving machine.You can also mark cigarette holders,pens,bearings,hardware,etc.

34” diameter Rotary Indexer welding positioner unable to test parts/repair C93 - Best guess maybe 1500-2000 lbs. Appears to be hydraulic drive maybe. Has electricity. Condition of table surface is good. Does not appear to be beat up.

Rotary Table 3" inch 80mm & Suitable Single Bolt Tailstock 65mm chuck& Backplate - 3 Jaw Self Centering Chuck 65MM. These are adjustable for different heights & also having fine feed center point and the center tip is hardened and Ground. It is made up of good grade of cast iron. Table Dia.

2-1/2" Self Centering 4 Jaw Chuck With Backplate For 3" & 4" Rotary Table - 65mm SELF CENTERING CHUCK 4 JAW THREADED M14 X 1 WITH BACKPLATE. SET INCLUDES : 4 JAW 65mm CHUCK + BACKPLATE + T NUTS & BOLTS. Self Centering Chuck 4Jaw With Outer Dia.2-1/2" (65mm). Body is made of graded cast iron.

65Mm Self Centering 4 Jaw Chuck With Backplate For 3" & 4" Rotary Table - 65mm SELF CENTERING CHUCK 4 JAW THREADED M14 X 1 WITH BACKPLATE. SET INCLUDES : 4 JAW 65mm CHUCK + BACKPLATE + T NUTS & BOLTS. Self Centering Chuck 4Jaw With Outer Dia.2-1/2" (65mm). Body is made of graded cast iron.

2 1/2" 65Mm Self Centering 4 Jaw Chuck With Backplate For 3" & 4" Rotary Table - 65mm SELF CENTERING CHUCK 4 JAW THREADED M14 X 1 WITH BACKPLATE. SET INCLUDES : 4 JAW 65mm CHUCK + BACKPLATE + T NUTS & BOLTS. Self Centering Chuck 4Jaw With Outer Dia.2-1/2" (65mm). Body is made of graded cast iron.

3 Jaw Self Centering Chuck 2 1/2" With Backplate For 3" & 4" Rotary Table - 65mm SELF CENTERING CHUCK 3 JAW THREADED M14 X 1 WITH BACKPLATE. SET INCLUDES : 3 JAW 65mm CHUCK + BACKPLATE + T NUTS & BOLTS. Self Centering Chuck3 Jaw With Outer Dia.2-1/2" (65mm). Body is made of graded cast iron.

3 Jaw Self Centering Lathe Chuck 2" 50Mm With Backplate For 3" & 4" Rotary Table - 50mm SELF CENTERING CHUCK 3 JAW THREADED M14 X 1 WITH BACKPLATE. SET INCLUDES : 3 JAW 50mm CHUCK + BACKPLATE + T NUTS & BOLTS. Self Centering Chuck3 Jaw With Outer Dia.2" (50mm). Body is made of graded cast iron.

Kalanjari 2" / 50Mm , 3 Jaw Chuck With Backplate For 3" & 4" Rotary Table - 50mm SELF CENTERING CHUCK 3 JAW THREADED M14 X 1 WITH BACKPLATE. SET INCLUDES : 3 JAW 50mm CHUCK + BACKPLATE + T NUTS & BOLTS. Self Centering Chuck3 Jaw With Outer Dia.2" (50mm). Body is made of graded cast iron.

Kalanjari 2- 1/2" , 3 Jaw Chuck With Backplate For 3" & 4" Rotary Table - 65mm SELF CENTERING CHUCK 3 JAW THREADED M14 X 1 WITH BACKPLATE. SET INCLUDES : 3 JAW 65mm CHUCK + BACKPLATE + T NUTS & BOLTS. Self Centering Chuck3 Jaw With Outer Dia.2-1/2" (65mm). Body is made of graded cast iron.

2 1/2" 65Mm Self Centering 3 Jaw Chuck With Backplate For 3" & 4" Rotary Table - 65mm SELF CENTERING CHUCK 3 JAW THREADED M14 X 1 WITH BACKPLATE. SET INCLUDES : 3 JAW 65mm CHUCK + BACKPLATE + T NUTS & BOLTS. Self Centering Chuck3 Jaw With Outer Dia.2-1/2" (65mm). Body is made of graded cast iron.

Monport Rotary Axis 80mm 3 Jaw Rotary Attachment for Fiber Laser Engraver Marker - 1-year warranty on the rotary roller axis. Rotary Axis 1. Find the "Rotary Switch" on the back of the machine box. Chuck Size: 3.15" (80 mm). If you do not receive our reply within 48 hours, pls. FDA Approved & CE Certified.

Rotary Table 3”-80 mm Horizontal - Vertical Milling Metalworking.. H.Q. - Milling : Milling curved profiles and angled faces relative to a centre line. The versatile units can also be used on drilling, boring or slotting machines permitting an even greater range of operations.

Vertex 6" Super Indexing Fixture (3900-2318) - Super 6" Rotary Indexing Fixture ~ Made in Taiwan ~ Designed for milling, drilling, jig boring, and many other shop applications. ~ Hardened and ground 24 position index plate with 15° increments. ~ 360° satin chrome graduated ring with a 10 second adjustable vernier plate insures accurate readings. ~ Each unit is equipped with 6 masking plates for fast and simple indexing of 2, 3, 4, 6, 8 and 12 divisions. ~ Complete with a 3-jaw chuck and faceplate. ~ Maximum individual spacing error is 25 seconds. ~ Squareness (table base to chuck 90°) is 0.0008". ~ Base parallelism from face to face is 0.0004". ~ Mounting flange concentricity is 0.0008". ~ Chuck concentricity is 0.0005". ~ Center hole is 1-23/32".

Vertex 12" Horizontal/Vertical Rotary Table (3900-2332) - 10" Horizontal/Vertical Rotary Table - Vertex # HV-12. Overall Horizontal Height: 5.3". Overall Vertical Height: 15.3". Vertical Center Height: 7.7". Horizontal load capacity is 264 lbs. Vertical load capacity is 132 lbs.

Vertex Adjustable Tailstock (3900-2409) - Also works with the Vertex 10" Swing Dividing Head. Vertex # TS2. Center height is 4.5 TO 5.7". AIR, POWER & HAND TOOLS. Get It Quick!

ADVANTAGE PLUS Carbide Lathe Tool Set, 5/16 In, 16N205 - Item : Lathe Tool Bit Set. Accessory Type : Lathe Tool Bit Set. Product Type : Lathe Tool Bit Set. Lathe Tool Bit Set, Number of Pieces 11. Cutting Direction : Right and Left Hand. Application : Suitable For Machining A Wide Range Of Ferrous And Non-ferrous Materials.

CNC 4th A Rotary Axis Harmonic Drive Reducer Waterproof Motor With ER32 Chuck - CNC 4th A Rotary axis Harmonic drive reducer waterproof motor with ER32 chuck Speed reducing ratio 50:1 for milling machine. Chuck: ER32 chuck. Stepper motor: two-phase stepper motor 57. Rotary Axis Harmonic Drive Reducer.

KOCT-DEX RU100DF042702 Indexing Table 4 Stations M0050 - 24.0000 x20.0000 x16.0000. Reference Number. Tested Good. This is a used item and has been checked for basic functionality. Warranty Information. Product Information. STEP MOTORS. Electric/Motors/Breakers/Power.

Weiss TC 120G Rotary Indexing Table 2 Positions Speed d w/ AZKA 56L-4T Motor - STEP MOTORS. Station 2 Speed D Weight 22kg;. Reference Number. Warranty Information. Product Information. Tool & Machine Components. Electric/Motors/Breakers/Power. Racks, Mounts, & Patch Panels.

Ferguson Ed200-6-200 R Rotary Indexer Drive Table Intermittor - MANUFACTUER: FERGUSON. MODEL OF FERGUSON REDUCER ON UNIT: R200, RATIO: 30.1. SALES ORDER NUMBER: 9518783-001-1. MO/YEAR: 3/95.

1 Box Of Misc. Haas 5C Indexing Parts, Cables, Controls, Rotary Tables, As Is - (1) Box of Misc. Haas 5C indexing parts. See photos for contents. Box Weight w/ contents: 270 lbs. SOLD AS IS.

80mm Chuck Laser Axis Rotary Attachment Shaft For Laser Marking Engraver Machine - Size : Chuck Size 80MM. ✔ 1x 80mm Rotating Shaft. ★ Mainly used for laser marking machine,laser welding machine,laser engraving machine.You can also mark cigarette holders,pens,bearings,hardware,etc.

80mm Chuck Laser Rotation Axis Rotary Attachment for Fiber Laser Marking Machine - 80mm Laser Rotaion Axis Shaft Fiber Laser Marking Machine Engraving Rotating Fixture (With Stepping Driver). - Size: Chuck Size 80MM. 1X 80mm Rotating Shaft. Mainly used for laser marking machine,laser welding machine,laser engraving machine.You can also mark cigarette holders,pens,bearings,hardware,etc.

80mm Laser Axis Rotary Chuck Shaft Attachment for Laser Marking Engraver Machine - 80mm Laser Rotaion Axis Shaft Fiber Laser Marking Machine Engraving Rotating Fixture (With Stepping Driver). - Size: Chuck Size 80MM. 1X 80mm Rotating Shaft. Mainly used for laser marking machine,laser welding machine,laser engraving machine.You can also mark cigarette holders,pens,bearings,hardware,etc.

80mm Laser Rotation Axis Shaft Rotary Attachment for Fiber Laser Marking Machine - 80mm Laser Rotaion Axis Shaft Fiber Laser Marking Machine Engraving Rotating Fixture (With Stepping Driver). - Size: Chuck Size 80MM. 1X 80mm Rotating Shaft. Mainly used for laser marking machine,laser welding machine,laser engraving machine.You can also mark cigarette holders,pens,bearings,hardware,etc.

80mm Chuck Laser Rotation Axis Rotary Shaft for Laser Marking Engraving Machine - Size:Chuck Size 80mm. Mainly Used for Laser Marking Machine, Laser Welding Machine, Laser Engraving Machine. you Can Also Mark Cigarette Holders, Pens, Bearings, Hardware,etc. - Function:General Purpose for Marking.

80mm Chuck Laser Axis Rotary Attachment Shaft For Laser Marking Engraver Machine - Size:Chuck Size 80mm. Mainly Used for Laser Marking Machine,Laser Welding Machine,Laser Engraving Machine.you Can Also Mark Cigarette Holders,Pens,Bearings,Hardware,Etc. - Function:General Purpose for Marking.

80mm Rotation Laser Axis Rotary Chuck Attachment for Fiber Laser Marking Machine - 80mm Laser Rotaion Axis Shaft Fiber Laser Marking Machine Engraving Rotating Fixture (With Stepping Driver). - Size: Chuck Size 80MM. 1X 80mm Rotating Shaft. Mainly used for laser marking machine,laser welding machine,laser engraving machine.You can also mark cigarette holders,pens,bearings,hardware,etc.

80mm Laser Rotation Axis Rotary Chuck For Fiber Laser Marking Engraving Machine - Size:Chuck Size 80mm. Mainly used for laser marking machine,laser welding machine,laser engraving machine.You can also mark cigarette holders,pens,bearings,hardware,etc. In this way,the work platform not only requires high precision and high production efficiency,but also has"flexibility",that is,flexible and versatile,and can quickly adapt to changes in processed parts.

80mm Laser Axis Rotary Shaft Rotation Attachment for Engraving Marking Machine - Mainly used for laser marking machine,laser welding machine,laser engraving machine.You can also mark cigarette holders,pens,bearings,hardware,etc. - Size:Chuck Size 80mm. - Function:General Purpose for Marking.

80mm Chuck Laser Rotating Axis Rotary Shaft w/ Driver for Laser Marking Machine - Size:Chuck Size 80mm. Mainly used for laser marking machine,laser welding machine,laser engraving machine.You can also mark cigarette holders,pens,bearings,hardware,etc. 1x80mm Rotating Shaft. - Function:General Purpose for Marking.

80mm Laser Rotation Axis Fiber Laser Marking Machine Rotary Chuck Shaft Driver - Size:Chuck Size 80mm. Mainly used for laser marking machine,laser welding machine,laser engraving machine.You can also mark cigarette holders,pens,bearings,hardware,etc. In this way,the work platform not only requires high precision and high production efficiency,but also has"flexibility",that is,flexible and versatile,and can quickly adapt to changes in processed parts.

Clean! Craftsman 8" Horizontal X&Y Axis Cross Slide Rotary Table - This is an 8" Horizontal X & Y Axis Cross Slide Rotary Table. Made in the USA by Craftsman. X & Y Axis Travels: 4". Table Rotation: 360 degrees. Table Height: 5-1/2".

80mm Laser Rotary Chuck Jaws, opens to 4" (101mm) in diameter - This is a custom set of jaws that fit most 80mm laser rotaries and can handle cups, mugs, tumblers, and other cylindrical objects up to 4" (101mm) in diameter.Color may be different than what is pictured, rotary not included.

48" X 48" Lucas Rectangular Manual-Indexing T-Slotted Rotary Table - #29908 - 48" x 48" LUCAS SQUARE MANUAL-INDEXING. T-SLOTTED ROTARY TABLE. EQUIPPED WITH.

30" X 36" Lucas Rectangular Manual-Indexing T-Slotted Rotary Table - #29909 - INDEXING T-SLOTTED ROTARY TABLE. 30" x 36" LUCAS RECTANGULAR MANUAL. EQUIPPED WITH CATALOG SPECIFICATIONS.

25" X 36" Lucas Rectangular Manual-Indexing T-Sloted Rotary Table - #29910 - INDEXING T-SLOTTED ROTARY TABLE. 25" x 36" LUCAS RECTANGULAR MANUAL. EQUIPPED WITH CATALOG SPECIFICATIONS.

Rotary Table Tilting 4 Slots 3" Inches 75mm for Milling Metalworking USA ACTOOLS - Situated at the industrial hub of India we specialize in providing complete tooling solutions. Our Advice :Check with ACTOOLS before you buy from anywhere else. Rotary Tables 3″ (Tilting):-. Type: Tilting.

80mm Rotation Axis Fiber Laser Marking Machine Rotary Chuck Rotary Shaft Driver - 80mm Rotaion Axis Fiber Rotary Chuck Rotary Shaft for Laser Marking Machine. 80mm Laser Rotaion Axis Shaft Fiber Laser Marking Machine Engraving Rotating Fixture (With Stepping Driver). - Size: Chuck Size 80MM.

80MM Laser Marking Machine Rotary Axis Stepping Driver Engraving Rotary Shaft ax - 80mm Laser Rotaion Axis Shaft Fiber Laser Marking Machine Engraving Rotating Fixture (With Stepping Driver). 80mm Rotaion Axis Fiber Rotary Chuck Rotary Shaft for Laser Marking Machine. - Drive Mode: Stepping.

65MM Height High Performance CNC Tailstock Fits CNC Rotary Machines Hot Sale - Features： Center height: 65MM Telescopic stroke: 45MM Top: use Mo-type 2 top Accessories: with axial locking wrench (pictured) Weight: 2.5KG.

Small 2-3/4" Rotary Table For Watchmakers, Engineering Tool Usa Fulfilled - SMALL 2-3/4" ROTARY TABLE FOR WATCHMAKERS, JEWELRY, MILLING,ENGINEERING TOOL. USA FULFILLED ROTARY TABLE :-.

65MM Wood Lathe Alive Tailstock For 4 Axis Rotary Router Machines Axis Engrave - Features： Center height: 65MM Telescopic stroke: 45MM Top: use Mo-type 2 top Accessories: with axial locking wrench (pictured) Weight: 2.5KG.

65mm Rotary Axis Live Center Tail-Stock MT2 for CNC Router A 4th Axis Tailstock - Features： Center height: 65MM Telescopic stroke: 45MM Top: use Mo-type 2 top Accessories: with axial locking wrench (pictured) Weight: 2.5KG.

NEW 65mm 4th Axis Tailstock For CNC Rotary Metalwork With Axial Locking Wrench - Features： Center height: 65MM Telescopic stroke: 45MM Top: use Mo-type 2 top Accessories: with axial locking wrench (pictured) Weight: 2.5KG.

65mm, MT2 Tail-Stock Rotary Axis Live Center For CNC A 4th Axis Router Tailstock - Features： Center height: 65MM Telescopic stroke: 45MM Top: use Mo-type 2 top Accessories: with axial locking wrench (pictured) Weight: 2.5KG.

BS-0 TS-1 Rotary Table Lathe Adjustable! Tailstock! 5" 6" HV4 HV6 - Compatible with HV4, HV6, BS-0, and other rotary tables! Includes all you see in pictures.

YTS-DEX RU110DF042702RS3 11DF 4 Position/Stops Indexing Table M0660 - Signals & Source Generators. STEP MOTORS. Power Supplies. Electric/Motors/Breakers/Power. Reference Number. Warranty Information. Product Information. Tool & Machine Components.

Camco 902RDM-32H32-180 Rotary Indexing Table 32 Positions T174568 - Fair Physical Condition. 28.0000 x28.0000 x14.0000. Reference Number. Tested Good. Warranty Information. Product Information. STEP MOTORS. Electric/Motors/Breakers/Power.

Weiss TC 500T Rotary Indexing Table 16 Positions Speed i - STEP MOTORS. Station 16 Speed i weight 345kg;. Reference Number. Warranty Information. Product Information. Tool & Machine Components. Electric/Motors/Breakers/Power. Racks, Mounts, & Patch Panels.

Stelron/Baldor RD-1-12P-270-RH-LK-M Rotating Index Table 12 Pos with Motor T1257 - Semiconductor & PCB Equip. Racks, Mounts, & Patch Panels. STEP MOTORS. Power Supplies. 8" 3/4 diam with 48CZ. 33 H.P Motor PM3327P. Electric/Motors/Breakers/Power. Tool & Machine Components. Warranty Information.

Weiss TC 320T Indexing Table T117462 - 23.0000 x23.0000 x2.0000. Reference Number. S/N: TC327970. Warranty Information. Product Information. STEP MOTORS. Electric/Motors/Breakers/Power. Racks, Mounts, & Patch Panels.

Weiss TC 120G 2 Position Fixed Station Rotary Index Table - Semiconductor & PCB Equip. Racks, Mounts, & Patch Panels. Signals & Source Generators. STEP MOTORS. Power Supplies. Electric/Motors/Breakers/Power. Tool & Machine Components. Product Information.

4th axis rotary table Consultation - This listing is for a consultation to see if a Tsudakoma 4th axis could be a good fit for you. No physical goods included

Camco 601RDMSH24-270 Indexer, Indexing Drive Table 8 Stations Pos 30:1 180SM M23 - Tool & Machine Components. STEP MOTORS. This is a used item and has been checked for basic functionality. Reference Number. In very good physical & working condition. Warranty Information. Product Information.

CAMCO Rotary Indexer Indexing Table 8 Position M2277 - Signals & Source Generators. STEP MOTORS. Power Supplies. Electric/Motors/Breakers/Power. Reference Number. Unit in great shape and checked out OK. This is a used item and has been checked for basic functionality.

YTS-DEX RU110DFO42702RS3 4 Position Indexing Table M0682 - Signals & Source Generators. STEP MOTORS. Power Supplies. Electric/Motors/Breakers/Power. Reference Number. 220/380 V. 1425 RPM. Tested OK. Warranty Information.

KOCT-DEX RU110DFO42702RS3 4 Position Indexing Table M0681 - Signals & Source Generators. STEP MOTORS. Power Supplies. Electric/Motors/Breakers/Power. Reference Number. 220/380 V. 1425 RPM. 3.32/1.92 A. Tested OK. Warranty Information.

Camco HR107 901RDM1-2H32-270 8 Position Rotary Indexing Table 12 In T177518 - Signals & Source Generators. STEP MOTORS. Power Supplies. Electric/Motors/Breakers/Power. 90 VDC Motor. 8 Positions. Warranty Information. Product Information.

Weiss TC 220T 5.5AZKA 63L-4T Rotary Indexer Table 2 station T166847 - Signals & Source Generators. Reference Number. Warranty Information. Product Information. STEP MOTORS. Electric/Motors/Breakers/Power. Racks, Mounts, & Patch Panels. Networking & Communications.

Weiss TC 150T Rotary Indexer Table 4 Station T166846 - Signals & Source Generators. Reference Number. Warranty Information. Product Information. STEP MOTORS. Electric/Motors/Breakers/Power. Racks, Mounts, & Patch Panels. Networking & Communications.

Haas T5C4 4-Postion 5-Axis Rotary Trunnion MINT!!!!! - We tried to use it a few years ago, and it the modules wouldn’t align. We have not used it since we got it back. It is still wrapped up from the factory. It is “new” by almost any standard.

Rotary Table 4" 100 mm Horizontal And Vertical With 65 mm 3 Jaw Chuck Backplate - KIT INCLUDES : ROTARY TABLE + CHUCK + BACKPLATE + T-NUTS . 3 Jaw Self Centering Chuck (65mm) Dia. M14X1 Threaded :-. 65mm Self Centering Chuck 3 Jaw. Rotary Table Dia.: 4" (100mm). Rotary Tables 4″ (100mm) : -.

MultifunctionWorktable Milling Working Cross Table Milling Machine Compound D... - Get the most value for your money with Milling Working Table ! 1 6350 Milling Working Table, 1 accessories box, 1 manual. ★Mini multifunctional working table 6350,The table is suitable for mini drill and drill bracket series.

Rotary Table 3"Inch 80mm Horizontal And Vertical + Chuck All Sizes Combo - Rotary Tables 3″ (80mm):-. Rotary Table 3" ( 80 MM ):-. -Operates in the Horizontal or Vertical position. Simple to operate, they allow easy work handling and have many varied applications including.

Kerney Trecker Model H Dividing Head Disks 1, 2, 3, 4, 5, 6, & 7 See details - This is a set of the 7 discs listed on the division table of the Kerney Trecker Model H Dividing Head (K & T). Discs are 1/4" thick. Disk #3 has pin holes 20, 19, 18, 17, 16, & 15. Disk #7 has pin holes 99, 89, 79, 69, 59, & 48.

TILTING TABLE FOR MILLING MACHINE- (4" x 5" /100 x 125 mm) -USA FULFILLED - TILTING TABLE FOR MILLING MACHINE-ENGINEERING MACHINE TOOLS (4" x 5" /100 x 125 mm). HIGH GRAIN CASTE IRON TILTING TABLE FOR MILLING MACHINE. (USA FULFILLED). SIZE 4" X 5"/ 100 X 125 MM. FEATURES TO TILT 45- 0-45 DEGREES.

Allenair Model 725-EC-6 Rotary Indexer Pneumatic 6 Position W/Valve - Allenair Pneumatic Rotary Indexer. 6 Position Rotary Indexer. Includes 12VDC Solenoid Valve. Model 725-EC-6.

BestEquip Dividing Plate Set 4"/100MM Indexing Head Rotary Table 3 x Index Pl... - BestEquip Dividing Plate Set 4"/100MM Indexing Head Rotary Table 3 x Index Plates for Milling Machine for Rotary Tables in Model HV-3/4/5/6. Related Accessories: The indexing plate set includes 3pcs Index Plate, 1pcs Crank Handle, 3pcs Screw, 1pcs Sector and 1pcs U Washer, perfect to use with indexing head.

Klutch Mill Digital Rotary Table - This 4in. Klutch Mill Digital Rotary Table with handwheel rotation DRO can be used in the horizontal or vertical position. Graduated with a 360 scale and features a rotational accuracy of 10 second.

For Laser Welding Machine Laser Engraving Machine 80mm Laser Rotary Shaft Axis - 80mm Rotaion Axis Fiber Rotary Chuck Rotary Shaft for Laser Marking Machine. 80mm Laser Rotation Axis F/ Fiber Laser Marking Machine Engraving Rotary Shaft. ❖ Size:Chuck Size 80MM. ★ Mainly used for laser marking machine,laser welding machine,laser engraving machine.You can also mark cigarette holders,pens,bearings,hardware,etc.

4" Inch Rotary Table High Precision Horizontal & Vertical 4 Milling Slots - 4" Rotary Table 100mm Horizontal Vertical With 4 Slots For Milling. Can be used in both horizontal & vertical position. Table Slots:4. Table Dia. : 4" (100mm). Table Height : 2-1/16" (52mm). Table graduated in360 Degrees.

Horizontal & Vertical Rotary Table Table 4" Inch 100mm 4 Milling Slots - 4" Rotary Table 100mm Horizontal Vertical With 4 Slots For Milling. Table Dia. Can be used in both horizontal & vertical position. Table Slots:4. Table Height : 2-1/16" (52mm). Table graduated in360 Degrees.

4” Inch Adjustable ROTARY TABLE 100mm Horizontal Vertical With 4 Milling Slots - 4" Rotary Table 100mm Horizontal Vertical With 4 Slots For Milling. Table Dia. Can be used in both horizontal & vertical position. Table Slots:4. Table Height : 2-1/16" (52mm). Table graduated in360 Degrees.

Indexing Plate Set Dividing Plates Set For HV4 And HV6 Rotary Tables - Dividing Plates set for HV4 and HV6 Rotary Table. Fit to our HV4 and HV6 Rotary Table. Plate 1 – 15, 16, 17, 18, 19, 20. Plate 2 – 21, 23, 27, 29, 31, 33. Plate 3 – 37, 39, 41, 43, 47, 49.

Tilting Rotary Table 4 Slots 3" Inches 75mm for Milling Metalworking - ROTARY TABLE 3" (4 SLOTS) TILTING. Table tilts up to90 degree and can be used anywhere in between and locked. The table is graduated0-360 degree in5 degree divisions.

MT2 Axis Live Center Tailstock & Axial Locking Wrench Pneumatic Rotary Thimble - Features： Center height: 65MM Telescopic stroke: 45MM Top: use Mo-type 2 top Accessories: with axial locking wrench (pictured) Weight: 2.5KG Our Gauranteen: 1.We Provide you with the verious ways of shipping,you can choose the best way to ship to you. 2.If the items unfortunately don"t work,or work badly,we have our engineers to serve you the professional help,otherwise we have many convinient ways to return the items.Plz pay attention to our Returning policy. 3.If you don"t receive our items,plz feel free to contact US,we will deal it as soon as possible. 4.If you meet any other questions,Plz feel free to contact US. 5.For all problems,We will deal it in 1 day noramally(except Vacational days),not more than 3 days. .

4” 100mm Rotary Table + 65mm 3 Jaw Self Centering Chuck + Back Plate - 65mm Self Centering Chuck 3 Jaw. Table Dia.: 4" (100mm). Back plate is made in a manner that it fits 3” as well as 4” rotary table - both 3 slots & 4 slots respectively. Table Slots: 4.

4" Inch Tilting Rotary Table 4 Slot 100mm With 3 Jaw 65mm Lathe Chuck Backplate - Rotary Tables Tilting 4″ (100 mm). Self Centering Chuck3 Jaw With Outer Dia.2-1/2" (65mm). Body is made of graded cast iron. Table surface has4 Radial T Slots for8mm T Nuts. Jaws are made of tool steel, hardened & ground.

Rotary Table 4" 100mm Horizontal And Vertical With 65mm 3 Jaw Chuck & Backplate - 4" (100mm) Rotary Table + 3 Jaw (65mm) Self Centering Chuck + Back Plate. KIT INCLUDES : ROTARY TABLE + CHUCK + BACKPLATE + T-NUTS . 3 Jaw Self Centering Chuck (65mm) Dia. M14X1 Threaded. 65mm Self Centering Chuck 3 Jaw.

4" Inch Precision Tilting Rotary Table HV 4 Slot 100mm With Vise Round Vice - ROUND VISE 4"(100mm) SPECIFICATION. Round Vise Jaw Width: 3-1/8" (79mm). Round Vise Jaw Depth: 13/16" (20.5mm). Rotary Tables Tilting 4″ (100 mm). Round Vise Jaw Opening: 1-9/16" (40mm). Round Vise Height: 1-1/4" (33mm).

Rotary Table 4"100mm Horizontal And Vertical With 65mm 4 Jaw Chuck & Backplate - 4" (100mm) Rotary Table + 4 Jaw (65mm) Self Centering Chuck + Back Plate. KIT INCLUDES : ROTARY TABLE + CHUCK + BACKPLATE + T-NUTS . 4 Jaw Self Centering Chuck 2.55" (65mm) Dia M14X1 Threaded. 65mm Self Centering Chuck 4 Jaw.

4" Inch Precision Tilting Rotary Table 4 Slots 100mm for Milling Metalworking - Rotary Tables Tilting 4″ (100 mm). Table surface has4 Radial T Slots for8mm T Nuts. This relatively low height increases the working capacity for machines. 2-13/16" (71mm) overall height in flat position.

4" 100mm Rotary Table With 4" Round Vise Vice Fixing T Nuts METALWORKING MILLING - 4" (100mm) ROTARY MILLING TABLE WITH 4"(100mm) ROUND VISE. ROUND VISE 4"(100mm) SPECIFICATION. Round Vise Jaw Width: 3-1/8" (79mm). Round Vise Jaw Depth: 13/16" (20.5mm). Round Vise Jaw Opening: 1-9/16" (40mm).

Rotary Table 3" 75mm Horizontal And Vertical With 65mm 3 Jaw Chuck & Backplate - 3" (75mm) Rotary Table + 3 Jaw (65mm) Self Centering Chuck + Back Plate. KIT INCLUDES : ROTARY TABLE + CHUCK + BACKPLATE + T-NUTS . 3 Jaw Self Centering Chuck (65mm) Dia. M14X1 Threaded. 65mm Self Centering Chuck 3 Jaw.

3" Inch Precision Tilting Rotary Table HV 4 Slot 75mm With 80mm Vise Round Vice - Vise / Vice Jaw Width:2-7/16" (62mm). Vise / Vice Jaw Depth:3/4" (19mm). Vise / Vice Jaw Opening:1-5/8" (27mm). ROTARY TABLE 3" (4 SLOTS) TILTING. Vise / Vice Height:1-1/4" (31mm). Fits our3" (80mm) & 4" (100mm) Rotary Tables perfectly.

3” Inch Precision Rotary Table 80mm HV With 4 Milling Slots & Suitable Backplate - 3" ROTARY TABLE H/V WITH 4 MILLING SLOTS & BACKPLATE. KIT INCLUDES : ROTARY TABLE + BACKPLATE + T-NUTS . Table Slots :4. Table Dia. :3-1/8" (80 mm). Table Height :1-5/8" (44mm). Can be used in bothHorizontal & Vertical position.

3” Inch Rotary Table 80mm H/V Low Profile Having 4 Milling Slots With Backplate - 3" ROTARY TABLE H/V WITH 4 MILLING SLOTS & BACKPLATE. KIT INCLUDES : ROTARY TABLE + BACKPLATE + T-NUTS . Table Slots :4. Table Dia. :3-1/8" (80 mm). Table Height :1-5/8" (44mm). Can be used in bothHorizontal & Vertical position.

Secondhand Rotary Axis 80mm 3Jaw Rotary Attachment Fiber Laser Engraver Markers - Secondhand features With the connected 4 pin aviation plug, you can hook up this chuck rotary axis to a wide range of OMTech fiber laser engraving machines and start marking rings, cans, pens, pipes, and more!

Bison-Bial 6" Type 5859 Horizontal/Vertical Low Profile Rotary Table - Whether scroll, independent or collet, these chucks have been replacing their competitors for the last 30 years without sacrificing production. Rigid, low profile, compact design provides for three types of dividing.

X‑Axis Linear Stage Manual Twist Fine‑Tune Platform Sliding Table Aluminum Alloy - Fine‑tuning X‑axis sliding table have stable structure, excellent performance and long service life. Pitch: 1.5mm. Feature: 1. The main body adopt aluminum alloy, light weight and strong, friction‑resistant, quiet, scratch‑resistant, drop‑proof and corrosion‑resistant.

X-Axis Linear Stage Dovetail Groove Screw Drive Platform Sliding Table XSLC90 - Corresponding for MISUMI Model: XSLC90. Sliding Table Material: Aluminum alloy sliding table. Type: X-Axis Sliding Table Straightness (um): 30. Parallelism of Sliding Table (um): 30. Feature: 1. The main body is made of aluminum alloy material, wear‑resistant and durable, provide product engineering drawings for your convenience.

Sliding Table Thin X‑Axis Aluminum Alloy Platform Manual Displacement Platform - Feature: 1. The main body of the sliding table is made of aluminum alloy, which is light in weight, quiet and resistant to friction. Sliding Table Material: Aluminum Alloy. Item Type: Sliding Table.

3” Inch Precision Rotary Table 80mm HV Low Profile 4 Milling Slots And Backplate - 3" ROTARY TABLE H/V WITH 4 MILLING SLOTS & BACKPLATE. KIT INCLUDES : ROTARY TABLE + BACKPLATE + T-NUTS . Table Slots :4. Table Dia. :3-1/8" (80 mm). Table Height :1-5/8" (44mm). Can be used in bothHorizontal & Vertical position.

Rotary Table 3" 80mm H/V With 4 Bolting Slot For Milling Metalworking Premium - 3" ROTARY TABLE HORIZONTAL / VERTICAL WITH 4 MILLING SLOTS. Table Dia. :3-1/8" (80 mm). Table Slots :4. Table Height :1-5/8" (44mm).

Rotary Table 3" 80mm Precision for Milling Machine Horizontal & Vertical 4 Slots - 3" ROTARY TABLE HORIZONTAL / VERTICAL WITH 4 MILLING SLOTS. Table Slots :4. Can be used in bothHorizontal & Vertical position. Table Dia. :3-1/8" (80 mm). Table Height :1-5/8" (44mm).

3" ROTARY TABLE HORIZONTAL / VERTICAL WITH 4 MILLING SLOTS DESCRIPTION Table - 3" ROTARY TABLE HORIZONTAL / VERTICAL WITH 4 MILLING SLOTS. Table Slots :4. Can be used in bothHorizontal & Vertical position. Table Dia. :3-1/8" (80 mm). Table Height :1-5/8" (44mm).

3 Jaw Self Centering Lathe Chuck 2" 50Mm With Backplate For 3" & 4" Rotary Table - Supplied With Backplate and T-Nuts . 3 JAW SELF CENTERING CHUCK. Chuck Dia.2" (50mm). Body is made of graded cast iron. Jaws are made of tool steel, hardened & ground.

100mm 4" ROUND VICE FOR VERTICAL SLIDE ROTARY TABLE VICE CAST IRON - 4"(100mm) ROUND VISE. ROUND VISE 4"(100mm) SPECIFICATION. Round Vise Jaw Width: 3-1/8" (79mm). Round Vise Jaw Depth: 13/16" (20.5mm). Round Vise Jaw Opening: 1-9/16" (40mm). Round Vise Height: 1-1/4" (33mm).

ROTARY ROUND VICE 3" 80mm Vise Has Horizontal And Vertical Vee In Moving Jaw - Round Vise 3"(80mm) For 3" Rotary Table Supplied With T nuts. Vise Jaw Width: 2.44" (62mm). Vise Jaw Depth: 0.74" (19mm). Vise Jaw Opening: 1.6" (27mm). Vise Height: 1.22" (31mm). The moving jaw has V-grooves to hold Round objects.

3" 80mm Rotary Table Round Vice Suitable For 3" & 4" Rotary Table With T nuts - Round Vise 3"(80mm) For 3" Rotary Table Supplied With T nuts. Fits our 3" (80mm) & 4" (100mm) Rotary Tables perfectly. Vise Jaw Width: 2.44" (62mm). Vise Jaw Depth: 0.74" (19mm). Vise Jaw Opening: 1.6" (27mm).

CNC Laser Chuck Rotation Axis Shaft Fiber Laser Marking Rotary Fixture 80MM New - 80mm Laser Rotaion Axis Shaft Fiber Laser Marking Machine Engraving Rotating Fixture (With Stepping Driver） Product Description: 1) In mechanical processing,multi-variety and small batch processing account for about 80%.In this way,the work platform not only requires high precision and high production efficiency,but also has"flexibility",that is,flexible and versatile,and can quickly adapt to changes in processed parts. 2) This work platform can better solve the problems of complex,precise,small batch and variable parts processing.It has the advantages of strong adaptability,high processing accuracy,stable quality and high production efficiency.It is a flexible and effective work platform. 3) The CNC precision worktable adopts ball screw and linear guide rail pair transmission.

X-Axis Linear Stage Dovetail Groove Long Stroke Fine-Tune Platform Sliding Table - Rail Type: Dovetail groove type. Moving Direction: X axis 1 direction. Length: Approx. 200mm / 7.9in Moving Stroke: ± Approx. 90mm / 3.5in. Drive Mode: Manually rotate the knob to advance the gear drive (gear + rack).

CNC Planetary Gear 4th Rotary Axis Dividing Head 65 100mm Chuck CNC A Axis Speed - CNC planetary gear 4th rotary axis dividing head 65 100mm chuck CNC A axis Speed reducing ratio 10:1 for Laser marking machine. CNC Planetary Gear 4th Rotary. Attribute 1: 4th axis (None chuck). Attribute 2: 4th axis (None chuck) + Drive.

Brown & Sharpe 20" Rotary Table We will ship! - Brown & Sharpe 20" Rotary Table We will skid and load this table for free buyer arranges freight and sends bill of lading shipping from our dock table moves freely needs to be cleaned

16" Rotary w/ Indexing Dividing Attachment Table - 16" Rotary w/ Indexing Dividing Attachment Table. I cannot figure out what brand this is but I"m continuing to look if anybody out there recognizes it please comment. Table seems to be in good condition moves freely no damage to any of the handles I will skid and load this table free of charge buyer sends bill of lading shipping from my dock high Warehouse

4"" Tilting Rotary Table with 65mm 3 jaw Self Centering Chuck & Back Plate USA - 4" 100mm Horizontal Vertical Tilting Rotary Table:-. 3 Jaw Self Centering Chuck (65mm) Dia. M14X1 Threaded. 65mm Self Centering Chuck 3 Jaw. Horizontal & Vertical Rotary Table 4" Table height 66 mm in flat position.

80mm Rotation Axis Rotary Chuck Rotary Shaft Driver Fiber Laser Marking Machines - Fiber Laser Marking Machine 80mm Rotation Axis Rotary Chuck Rotary Shaft Driver. 80mm Rotation Axis for Fiber Laser Marking Machine Rotary Chuck Rotating Shaft (With Driver). - Size: Chuck Size 80MM. 1X 80mm Rotating Shaft.

80mm Rotation Axis Fiber Laser Marking Device Rotary Chuck Rotary Shaft Driver - ▶Specifications: ❖ Size:Chuck Size 80MM ❖ Positioning Accuracy:0.1 ❖ Drive Mode:Stepping ❖ Function:General Purpose for Marking ❖ Material:Aluminum Plate+Steel.

80mm Rotation Axis Fiber Laser Marking Machine/ Rotary Shaft Driver Rotary Chuck - 80mm Rotaion Axis Fiber Rotary Chuck Rotary Shaft for Laser Marking Machine. 80mm Laser Rotation Axis F/ Fiber Laser Marking Machine Engraving Rotary Shaft. ❖ Size:Chuck Size 80MM. ✔ 1x 80mm Rotating Shaft.

CNC Precision 80mm Laser Rotation Axis Shaft Fits Fiber Laser Marking Machine - 80mm Laser Rotation Axis F/ Fiber Laser Marking Machine Engraving Rotary Shaft. ❖ Size:Chuck Size 80MM. ✔ 1x 80mm Rotating Shaft. ★ Mainly used for laser marking machine,laser welding machine,laser engraving machine.You can also mark cigarette holders,pens,bearings,hardware,etc.

80mm Rotation Shaft Engraving Rotary Shaft Axis For Fiber Laser Marking Machine - 80mm Rotaion Axis Fiber Rotary Chuck Rotary Shaft for Laser Marking Machine. 80mm Laser Rotaion Axis Shaft Fiber Laser Marking Machine Engraving Rotating Fixture (With Stepping Driver). - Size: Chuck Size 80MM.

80mm Rotating Shaft Stepping Drive Mode Fiber Laser Marking Machine Rotary Axis - 80mm Rotaion Axis Fiber Rotary Chuck Rotary Shaft for Laser Marking Machine. 80mm Laser Rotation Axis F/ Fiber Laser Marking Machine Engraving Rotary Shaft. ❖ Drive Mode:Stepping. ✔ 1x 80mm Rotating Shaft.

80mm Rotation Axis For Fiber Laser Marking Machine Engraving Rotary Shaft Axis - 80mm Rotaion Axis Fiber Rotary Chuck Rotary Shaft for Laser Marking Machine. ❖ Size:Chuck Size 80MM. ✔ 1x 80mm Rotating Shaft. ★ Mainly used for laser marking machine,laser welding machine,laser engraving machine.You can also mark cigarette holders,pens,bearings,hardware,etc.

CNC Steel 80 mm Rotating Shaft Fiber Laser Marking Machine Laser Rotation Axis - 80mm Laser Rotation Axis F/ Fiber Laser Marking Machine Engraving Rotary Shaft. 80mm Rotaion Axis Fiber Rotary Chuck Rotary Shaft for Laser Marking Machine. ★ Mainly used for laser marking machine,laser welding machine,laser engraving machine.You can also mark cigarette holders,pens,bearings,hardware,etc.

Aluminum Plate 80 mm Laser Marking Welding Machine Rotating Shaft Rotation Axis - 80mm Laser Rotation Axis F/ Fiber Laser Marking Machine Engraving Rotary Shaft. 80mm Rotaion Axis Fiber Rotary Chuck Rotary Shaft for Laser Marking Machine. ★ Mainly used for laser marking machine,laser welding machine,laser engraving machine.You can also mark cigarette holders,pens,bearings,hardware,etc.

80mm Stepping Driver Rotation Axis Engraving Marking Machine Rotary Shaft Chuck - Rotaion Axis Engraving Marking Machine Rotary Shaft Chuck Stepping Driver 80mm. 80mm Laser Rotaion Axis Shaft Fiber Laser Marking Machine Engraving Rotating Fixture (With Stepping Driver). - Drive Mode: Stepping.

SOPAP TSa 400-12-300-2-D Rotating Indexing Table M0471 - 30.0000 x30.0000 x20.0000. Reference Number. w/ MGM BA 80B4 motor. Warranty Information. Product Information. STEP MOTORS. Electric/Motors/Breakers/Power. Racks, Mounts, & Patch Panels.

Camco 425RD8H32-120 Rotary Intex Drive 8 Position Station Stops M2376 - Tool & Machine Components. Signals & Source Generators. STEP MOTORS. Power Supplies. Electric/Motors/Breakers/Power. This is a used item and has been checked for basic functionality. Warranty Information.

SOPAP TSA-400-5-300-7-D Rotary Indexer Table T149942 - 24.0000 x14.0000 x10.0000. Reference Number. Warranty Information. Product Information. STEP MOTORS. Electric/Motors/Breakers/Power. Racks, Mounts, & Patch Panels. Networking & Communications.

Weiss TC 220T Rotary Index Table 7 Positions Speed f w out Motor - Semiconductor & PCB Equip. Racks, Mounts, & Patch Panels. STEP MOTORS. Power Supplies. 7 Station, F Speed, 44kg Weight;. Electric/Motors/Breakers/Power. Tool & Machine Components. Warranty Information.

WEISS TC 500T Rotary Index Table 16 Positions 50 mm 24x21x11 - Overall dims 24x21x11 In. Semiconductor & PCB Equip. Racks, Mounts, & Patch Panels. STEP MOTORS. Power Supplies. Electric/Motors/Breakers/Power. Input shaft 28 mm. Tool & Machine Components.

Weiss TC 500T Rotary Indexing Table 16 Positions T120457 - 33.0000 x30.0000 x32.0000. Reference Number. Orange base not included. Connection box is broken and missing the fan cover. Motor is running, but the clutch is not working. Motor is 230/460 V. For parts or repair- This item is being sold as is, as pictured.

Weiss TC 500T Rotary Index Table 16 Positions T90077 - Semiconductor & PCB Equip. 17 Positions 500mm table. Racks, Mounts, & Patch Panels. STEP MOTORS. Power Supplies. Electric/Motors/Breakers/Power. Tool & Machine Components. Overall Dims: 24" x 21" x 11".

Weiss TC 500T Rotary Index Table 16 Positions T90076 - Semiconductor & PCB Equip. 16 Positions 500mm table. Racks, Mounts, & Patch Panels. STEP MOTORS. Power Supplies. Electric/Motors/Breakers/Power. Tool & Machine Components. Overall Dims: 24" x 21" x 11".

Camco 902RDM0H32-360 RH Industrial Rotary Index Drive Assembly T89267 - Semiconductor & PCB Equip. Continuous rotary table. Racks, Mounts, & Patch Panels. Tool & M

excitron rotary table pricelist

You Might Also Be Interested In