howard turner rotary table price

BADGER 1250(Ref#4418) Similar to Midway - Manufactured 1987 - 2  available - excellent condition, 5 x 6 duplex mud pump, 7.5" fixed rotary table, chain pulldown, rod box, pipe slide, winch, kelly, kelly bushing, handling tools, Mounted on Ford 9000 tandem axle with Detroit 8V92  Price on Request

BADGER 1250(Ref#6983N) Manufactured 1980, Spicer PTO, mounted on 2001 International with N14 Cummins engine, all new hydraulics, Gardner Denver 5x6 mud pump, 667 GD air compressor, 2000 DSM table, mechanical clutches, hydraulic pulldown, 2 rear hydraulic leveling jacks, 200" of new 2 7/8" x 20" drill pipe, all tools  Price:  $165,000

BADGER 1250(Ref#8508R)  Manufactured 1980, Leroi air compressor, Failing 5 x 6 mud pump, foam tank with injection pump, fixed rotary table, fluted kelly, hydrauluic pulldown, mounted on 1979 tandem axle International truck with 290 Cummins engine, 4 leveling jacks, 400" of drill pipe, mud pit, sitting and needs some work  Price:  $80,000

BADGER 1250(Ref#2019N)  Manufactured 1980, 1000 drawworks, Spicer PTO, mounted on 1980 International Paystar 5000 with all wheel drive, with DT466 diesel engine, 13 speed transmission, 35" mast, 5 x 6 Gardner Denver mud pump, LeRoi 50S2 air compressor, 8-1/2" Speedstar stationary rotary table, hydraulic pulldown, mechanical clutches, 2 hydraulic leveling jacks, breakout tongs, tools, 300" of 3-1/2" x 20" flush joint drill pipe, good condition  Price:  $145,000

JOY2500 DRILLING RIG(Ref#14157R)  Double drum drawworks with air clutches, 17-1/2" rotary table, Gardner Denver 5 x 10" duplex mud pump, mounted on 5 axle Mack Cabover chassis, currently being refurbished  Price:  $325,000

WESTERNGEOPHYSICAL EXPLORATION RIG(Ref#12981)  mounted on single axle truck with Ford 350 rebuilt gas engine, PTO, 5 x 6 mud pump, no compressor, 400" 15" drill pipe, 18" bit, Failing tower, 1 collar, 3 hydraulic jacks, 5-1/4" table  Price:  $30,000

WESTERN GEOPHYSICAL 1000(Ref#7240T)  Manufactured 1954, 1200 gear gase, mounted on 2 wheel drive 1964 Ford F600 2-ton truck, 330 V8 gas engine, 5-1/4" stationary table, hydraulic drawworks, 140" of 15" x 2-3/8 Mayhew pipe, 18" kelly, 3-1/4" round kelly drive, pulldown, 3 line machine  Price:  $29,500

SHOPBUILT GEO RIG(Ref#13488)  mounted on Mack Midliner, PTO, 23" fluted kelly, 5 x 6 Gardner Denver mud pump, rebuilt drawworks, clutches and brakes, new pins and bushings, rebuilt table and PTO, 4 stabilizing cylinders w/hydraulic locks, new hydraulic valves, pump lines and tank, 200" of 2-3/8" Mayhew pipe Price on Request

DAVEYM8W DRILL RIG(Ref#2884Na)  Manufactured 1976, mounted on Louisville Ford truck with 54 gas Ford engine, 5 and 4 transmission, new clutch, 38,000# rear, 26-1/2" Kelly bar 4" round, King swivel, 35" tower, 7-1/2" sliding table, 671 Detroit diesel deck engine, 500 cfm/125 psi Davey air compressor rebuilt with less than 2000 hours, water injection system hydraulically operated, 100" of 4" x 20" flush wall drill pipe, can drill to 900", can hold 300" steel PRICE:  $35,000

DAVEY M8 DRILL RIG(Ref#2884Nd)  Manufactured 1975, mounted on tandem axle Ford Louiville truck with 534 gas engine, 5 x 4 transmission, leveling jacks, 38,000# rear, good tires, 671 Detroit diesel engine, 500 cfm/125 psi Davey air compressor, rod box, 7-1/2” fixed table, 32-1/2’ x 4-1/2” Kelly bar, runs 4” drill string, 46’ one piece mast (can be reduced), work platform, holds 300’ drill pipe, 300’ of 4” x 20’ drill pipe, slips, 8-3/4” bit, 5-7/8” sub PRICE:  $35,000

DAVEY MA8R(Ref#11076Tb)  Manufactured 1965, 871 Detroit diesel engine (rebuitl 7-8 years ago), 350 Cummins truck engine, 500/250 air compressor, 20 gpm Bean water injection, mounted on 1966 Mack V83, retractable table, 500" of 3-1/2" drill pipe  Price:  $70,000

DAVEY M8(Ref#12376RB) with 600" of drill pipe (400" brand new) and White flatbed water truck, 1500 gallon tank, also 800cfm portable air compressor  Price:  $55,000

DAVEY M-8(Ref#14212Ra)  Detroit 671 diesel engine on deck, 8" table, 4" kelly, mounted on 1981 Mack with 300 Mack engine, 200" of 3-1/2" drill steel  Price on request

DAVEY M8(Ref#14212Rb)  Detroit 671 diesel engine on deck, 8" table, 4" kelly, monted on 1986 Ford with Cat 3208 engine, 200" of 3-1/2" drill steel  Price on Request

DAVEY M8AR(Ref#1696T)  Manufactured 1974, 500 cfm/100 psi piston air compressor, Detroit 671 deck engine, water injection, retractable 4- speed 8" table, mounted on 1974 White truck with Cummins 350, off road tires 75%, 500" of 4-1/2 x 20" Davey rods, 6" and 8" tools, 30" x 4-1/2" fluted kelly, currently working  Price:  $29,500

DAVEY M8(Ref#2884Npartsrig)  Parts rig, missing swivel and drawworks, air compressor bad, Manufactured 1970, 6-1/4” table, mounted on Ford Louisville truck with gas engine, 100’ steel, sub and bit  Price:  $13,500

DAVEY M8A(Ref#6123RB)  Manufactured 1958, 300/100 air, 4" kelly, rotary drive, Detroit diesel deck engine, mounted on 1969 Chevy tandem axle truck, 400" pipe  Price:  $37,500

DAVEY M8(Ref#671Na)  Davey 500/120 air compressor, Gardner Denver 3-1/2 x 5 air driven mud pump (can be unmounted from rig and used as stand alone unit), 671 Detroit diesel deck engine, Gardner Denver injection pump, 23" kelly bar, 7-1/2 rotary table, mounted on Ford tandem axle truck with gas engine  Price:  $75,000

DAVEY M8A(Ref#9240R)  Manufactured 1969, 8V71 Detroit on deck, 7-1/2" retractable table, rig does not start, mounted on 1969 Chevy C70 tandem axle truck, gas wengine, no mud pump, 490/250 air compressor  Price:  $37,500

DAVEY M8A(Ref#6569T)  mounted on 1964 International 190 truck, 471 Detroit engine, 6 cyl compressor, 28" kelly bar, 34" tower, sliding table, wrenches (hand made), 200" of 4" x 20" drill pipe  Price:$14,500

DAVEY DRILLING RIG(Ref#10682T)  500/125 Davey air compressor, 7-1/2” fixed table, 32-1/2 x 4-1/2” kelly bar, 46’ one piece mast (can be reduced), 671 Detroit deck engine with 5 x 4 transmission, mounted on 1978 Ford 900 tandem axle truck with 534 gas engine, leveling jacks, 38,000# rear, rod box (holds 300’ of pipe), slips, work platform, 200’ of 2-7/8” drill pipe, runs 4” drill pipe  PRICE:  $37,500

EWBANKM-100(Ref#3942Na) Manufactured 1980, 2000" depth capacity, Triple drum, 58" x 70,000# derrick, 18" rotary table, 8V71 Detroit diesel, 4-1/4" x 39" kelly, KG50 King swivel, 4 lines ¾" line, mounted on 3 axle trailer.

EWBANKS 50(Ref#13911Ra)  4 x 5 mud pump, mounted on 1978 International single axle truk, Cat 3208 engine, PTO, 5-1/4" stationary rotary table, no air, square kelly, mud pan, pipe rack, 200" pipe  Price:  $37,500

SEISMIC MODEL 10 DRILLING RIG(Ref#4188T) Rotary table drive, Gardner Denver 5 x 6 FG-41 mud pump, Ingersoll Rand Type 40 air cooled air compressor, munted on 1979 GMC Brigadier J9500 tandem axle truck, 30’ x 9’ x 11’ (10’ with Kelly and lights removed)  Price:  $41,000

REVERSE CIRCULATION ROTARY DRILL RIG(Ref#8095T)  Manufactured 1982, double drum drawworks, 1” main line, 1” laydown line,-1/2” tail out line, depth sounding line.  75’ x 100,000# derrick (new 2010), 6 cylinder Cat deck engine, (spare rebuilt engine in crate), 24” hydraulically driven removable rotary table, 15’ x 12’ x 8’ custom fabricated substrcuture with guard rails, pipe and accessories  Price:  $210,000

CUSTOM BUILT 80,000# ROTARY DRILLING RIG(Ref#8354T)  Built 2017, 65" x 80,000# mast, 3 drum DSM drawworks, Allison transmission for drawworks, 20" Howard Turner rotary table (hydraulically retractable), hydraulic table drive mounted on Cotta transmission (all new hydraulic pumps), mounted on Peterbilt truck with 350 hp Detroit 6V92T, Road Ranger 9 speed gear box, air twin disc clutches  Price:  $775,000

CHICAGOPNEUMATIC RT-2000(Ref#11290)  Manufactured 1979, mounted on Ford 8000 tandem axle truck with Cat 3208 diesel engine, 40" x 60,000# hydraulically raised mast, 10-1/2" rotary table,  5 x 10 Gardner Denver mud pump, drillers and helpers work platform, chain pulldown, kelly and kelly bushing, hydraulic leveling jacks, rod box, hook/block, trailer and  500" of 4-1/2" drill pipe (10" and 20")  Located South Pacific  Price:  $95,000

CHICAGO PNEUMATIC RT-1800(Ref#2272N)  Manufactured 1981, 825/250 GHH air compressor, 50" mast, 35" kelly, 5-1/2 x 8 mud pump, 10" retractable table, air clutches, chain pulldown, breakout tong, 5" x 35" fluted kelly, mounted on Crane Carrier with 400 hp Cummins engine,  PTO, 3 leveling jacks     PRICE:  $155,000

CHICAGO PNEUMATIC RT-1800(Ref#14013R)  Manufactured 1979, combination top head/table drive, 750/250 air compressor, 6 x 9 mud pump, hydraulic rotary table, Detroit 60 (550 hp) engine (recently rebuilt), PTO, mounted on Crane Carrier   Price:  $140,000

CHICAGO PNEUMATIC RT-1800(Ref#15149T)  Manufactured 1978, drawworks recently rebuilt, 10" CP table (rebuit), 5-1/4" x 28 fluted kelly, 50" derrick with racking board (will stand 40" in derrick), mounted on Crane Carrier 400 Cummins engine, PTO (rebuilt), ready to work.  Gardner Denver 5 x 10 mud pump mounted on trailer.  PRICE:  90,000

CHICAGO PNEUMATIC RT-1800(Ref#11586T)  Manufactured 1978, 5-1/2 x 8 mud pump, mounted on Crane Carrier with Cummins 400 engine, PTO, 200" of 3-1/2" pipe, 7" drill collars, 22" retracted table drive

HOWARDTURNER M2000(Ref#14336N)  triple drum drawworks, Gaso 5 x 10 mud pump, 12" Brewster table, 50" derrick, 6 part line, McKissick block, mounted on Kenworth chassis, 4 hydraulic jacks  Currently dismantled

HOWARD TURNER 1500(Ref#5883)  Manufactured 1968, 671 Detroit on deck, 24" kelly, 10" retractable table, 2" swivel, mounted on International single axle truck with gas engine   Price:  $40,000

CAREY(Ref#11065)  Wheatly 6 x 6 mud pump, 2" x 21" kelly, non-retractable rotary table w/4-1/2" opening, mounted on 1996 Forl L8000 truck with dieselengine, PTO, 300" of 14" drill pipe  Price on Request

FOREMOSTMOBILE B57(Ref#6222R) Manufactured 1983, with top drive, set up for mud rotary, PTO, mounted on 1983 International with Cat engine, new rear tires, new main master cylinder, new exhaust, new kelly hose, new pulleys and pulley sheaves, all new cable, 2" diaphragm mud pump, 145/100 piston air compressor, cathead, mud pit, 300" of new Mayhew Jr. drill pipe, new drill collar, new 8" claw bit, working daily, ready to go    PRICE:  $44,500

SHOP BUILT MUD ROTARY DRILLING RIG(Ref#7785T)  Built approx 2007, 150’ – 200’ depth capacity, rig has heavy duty railroad winch cable for up and down drilling operations or for pulling pumps, 3” centrifugal mud pump, IR 40 cfm developmental air compressor, pump and compressor run off Handona gas engines, boom will handle 10’ or 20’ rods, mounted on 1998 Ford 700 2 wheel drive truck, 7 ltr propane engine, (2) tanks (40 and 80 gal), drilling, hydraulics and truck run on propane, 500 gal water tank, pipe rack, compact rig.  Includes approx 120’ of 1-1/4” x 10’ rods, bits for 1-1/4”, 2” and 4” wells,  Price:  $30,000

SHOP BUILT MUD ROTARY RIG(Ref#8355T)  Similar to Failing 1250), 6 x 6 mud pump, mechanical clutches, hydraulic pulldown, 4-1/2" square kelly, 9" stationary table, mounted on Mack truck (Mid 1970"s) with Mack diesel engine, PTO, breakout tongs, pipe rack, 2 rear mechanical jacks, 300" of 3-1/2" x 15" drill pipe  Price:  $54,500

SHOP BUILT ROTARY RIG(Ref#1900N)  mounted on 1988 Ford LN8000 truck with 8.3 Cummins engine, 5 x 6 Gardner Denver mud pump, 5-1/4" retractable table, double drum drawworks, 18" x 3" square kelly, mechanical clutches, hydraulic pulldown, breakout wrench, 400" of 15" x 2-7/8" pipe, stabilizer,

SHOP BUILT COMBINATION RIG(Ref#10457T)  Tophead/rotary, PTO, mounted on 1986 International with DT466 engine, double trans, retractable rotary table, 2 rear hydraulic leveling jacks  Price on Request

SHOP BUILT COMBINATION CABLE/MUD ROTARY RIG(Ref#2458Na)  Isuzu diesel deck engine, mounted on 1998 GMC Topdick with Cat diesel engine, Wheatley 4 x 5 mud pump, LeRoi developmental air compressor, mud mixer, walking beam, stabilizer, hammer, bits, subs, etc., 4 hyd leveling jacks, 200" of 2-3/8" x 10" N rods, some tools   PRICE:  $70,000

SHOP BUILT RIG(Ref#13816)  Built to Speedstar specs, 32" mast, 5 x 6 mud pump, developmental air compressor, mounted on 1971 Ford F600 with new 330 gas engine, 600" of 2-7/8" bottleneck rod, 5-1/4" retract table 3 speeds, 3 speed Ramsey transmission, 12000# winch, has been sitting for several years (but was running when parked)  Price:  $20,000

SHOP BUILT MUD ROTARY RIG(Ref#4668T)  Built 1986, approx 540’ depth, double drum (shop build with triple clutch on each side), Gardner Denver 5 x 8 mud pump, 2” DSM swivel, 8-1/2” retractable table, trailer mounted, 46’ mast mechanically raised, 4” square kelly, 420" of 2-7/8" drill pipe  Price:  $47,500

SHOP BUILT 6000’ DRILLING RIG(Ref#2918Ta)  Trailer mounted, Cat 550 hp engine, 17-1/2” Oilwell rotary table, 7 x 14” mud pump with Cat engine, 4-1/2” kelly

SHOP BUILT ROTARY RIG(Ref#2111T)  Drills to 1500 – 2000", trailer mounted, 16" Brewster stationary table, (1) Waukesha gas engine, (1) diesel engine, some tools Price: $45,000

SHOP BUILT MUD ROTARY RIG  (Similar to Speedstar 1500)(Ref#5150T)  (2) Perkins 1000 Series deck engines freshly reman and not used since, 4 x 3 x 13 centrifugal mud pump, no air, 8-1/2" stationary table, mounted on Volvo with Cat diesel engine, mechanical clutches, 2 mechanical jacks in rear, no kelly, no pulldown, no pipe avaialble  Price:  $100,000

SHOP BUILT MUD ROTARY RIG  (Similar to Speedstar 1500)(Ref#5151T)  (2) Perkins 1000 Series deck engines, 5 x 8 Gardner Denver mud pump, no air, mounted on Kenworth truck with Cat diesel engine, mechanical clutches, no table, no kelly, no pulldown, 2 mechanical jacks in rear, no pipe  Price:  $137,500

SHOP BUILT ROTARY RIG(Ref#9442R) mounted on International with diesel engine, 7" stationary table, 23" Kelly, air clutches, no pulldown, 4x3 centrifugal mud pump with 453 Detroit engine, 2 hydraulic leveling jacks, currently drilling, ready to go

MUD ROTARY RIG(Ref#4964Na)  3 x 4 mud pump, no air, 4 cyl diesel deck engine, 17" kelly, 10" retractable table, pulldown, air clutches, mounted on 1980 Ford Detroit engine, 4 hydraulic jacks, 400" of 3-1/2" x 15" drill pipe, small hydraulic winch, large hydraulic winch  Price:  $30,000

SHOP BUILT MUD ROTARY RIG(Ref#10782Ra)  Built 1995, 3 x 4 mud pump, 7-1/2" table, (2) 527 Chevy gas deck engines, mounted on 1995 Kodiak single axle with 3115 Cat, 600" depth, rod box, 300" of 20" Mayhew pipe  Price:  $57,000

Revolve sells parts for Howard Turner rotary tables. We also rebuild all types of rotary tables and are able to offer winter seals that are made of a rubber compound engineered for Canadian winter temperatures.

We manufacture parts for the most common types of top drives and rotary heads used on truck and track mounted drilling rigs. Our replacement quills are engineered and certified and all replacement parts are manufactured to the same or higher specifications as OEM parts. We also offer the service to rebuild top drives completely and can include re-certification to CAODC and OH&S standards.

AugerBoostersBucket RigCableCompressorsMiscellaneousMud Grout PumpsParts ToolingPump HoistRotaryRotary A-BRotary CRotary DRotary E-FRotary GRotary H-IRotary J-LRotary MRotary P-QRotary RRotary SRotary T-ZSeismicSoldSteelTruckWater Truck Keyword:

2008, HTB; Model:2500; Compressor:N/A; Mud Pump:See Below; Engine:165 HP 6-Cylinder John Deere Diesel; Mounted On:Trailer; Truck Engine Make:N/A; Tools/Options:HTB 2500 Year: 2008: PRICE REDUCED Double Drums/Double Brake Banks on each Drum, Has Triple 16" HC Clutches with 18" Air Bags over the Plates. HT 12" Retractable Rotary Table, 55" Free Standing HTB Derrick, Rig is on 4-Lines and has been Pull Tested at 80,000#. Diesel Engine with 4-Speed Transmission. Rotary has a 5-Speed Transmission, 4 Leveling Jacks (8"X36), Spinning Chain, Hydraulic Wireline Unit and Counter (Halliburton), Near New 3" HD DSM Swivel on Tracks, Track Run by Air. All 3" Plumbing with Oilfield Hoses, Small Sub, Mats, 140 bbl. Mud System with Shaker and Desander Cones, 150 kW CAT Generator and Controls, 10,000 Gallon Water Tank with Water System, (2) Continental Emsco D-375 Pumps with 500 HP CAT Engines, Air Clutches, Guards, Rod Oilers. 3,500" of 3.5" IF Drill Pipe and (6) 6" Collars. Drill Pipe Handler that is on a Float, Carries 55 Joints of Pipe and (2) Drill Collars. Hydraulically Run, Plugs into Rig. Doghouse and Fuel Tank Mounted on Float, Living Quarters for Crew with 6 kW Generator and Water & Sewer System.. Condition:

1979, Ingersoll Rand; Model:TH-60; Compressor:750/250; Mud Pump:Gardner Denver 5X6; Engine:PTO; Mounted On:1979 International Paystar 5000; Truck Engine Make:Detroit 8-92T Silver; Tires:Near New; Condition:SOLD; Tools/Options:Ingersoll Rand TH-60 Year: 1979: SOLD 2nd Owner, Deep Hole Package 32,500# Pullback, Bean 18 GPM Injection Pump with Oil Injection, Standard 34" Mast, 9-Rod Carousel, 3.5" IR Drill rods. Detroit Engine was a Factory Rebuilt Exchange in 2005/6, Square Tube Tower always bolted when up. Upgraded with Near New 11R 22.5 Rear Wheels and Tires, New 425/55 R22.5 Super Single Steering Wheels and Tires. 2-Speed Gear-Matic 35 Casing Winch Line is 18,000# Bare Drum, 3-Speed Pullback and 2-Speed Rotation. High Speed Spindle Rotation is 240 rpm @ 2,500 ft./lb. Torque, Low Speed 120 rpm @ 5,000 ft./lb. Nice Straight Operator Platforms and an Added Lower Table Hinge. 75 Gallon Highway Fuel Tank and a 180 Gallon Off Road Fuel Tank with DOT Approved Connections. New Pullback Cables 6 Months Ago. Was working daily - no help available. Parts Manual Available. Approx. 1,000 of 3.5" X 20" IR Long Flat Drill Pipe with 2-3/8" Threads available for an extra cost. O.D. measures a little over 3-15/32", Good Condition is Available for an Extra Cost. May be a few 15"ers. SOLD

1985, Ingersoll Rand; Model:TH-60 Long Tower; Compressor:IR 750/250 - Rebuilt; Engine:PTO; Mounted On:1985 GMC General; Truck Engine Make:8V92T 475 HP; Condition:Good PRICE REDUCED; Tools/Options:Ingersoll Rand TH-60 Long Tower Year: 1985 : PRICE REDUCED One Owner. 7-Rod Carousel, Rod Box Holds 13 Rods, Rig is Set Up to Run 4.5" X 2-7/8" IF Drill Rod. Approx. Hours since Replaced New/Rebuilt: Motor: New - 4,000 Hrs., Trans: New - 3,600 Hrs., Compressor: Rebuilt - 3,500 Hrs., Cooler: New - 2,750 Hrs., Cotta Box: Rebuilt - 600 Hrs., Slide Box: Rebuilt - 250 Hrs., Main Pump: Rebuilt - 2,000 Hrs., Sundstrand Rotation: Rebuilt - 2,500 Hrs., Rotary Head Motors: - 500 Hrs., Water Injection Pump: CAT 1010, King Swivel: K-15 - 250 Hrs., Hammer Oiler, Additional Mud Piping. Truck has a 13-Speed Transmission, 20,000# Front Axle, 46,000# Rear Axle, Rear Tires 95%, Front Float Tires 98%. TH60 Manual Available, Rods Available. Also Available - (1) Slide Box that needs Rebuilt, (1) IR 750/250 Compressor End that needs Rebuilt.

1982, Ingersoll Rand; Model:T4W DH; Compressor:900/350; Engine:Detroit 12V71TT; Mounted On:CCC; Truck Engine Make:Diesel; Condition:Working Daily; Tools/Options:Ingersoll Rand T4W DH Year: 1982: 70,000# Pullback, Worm Gear Power Head with Two Motors, CAT 3 Piston Water Injection Pump, Hammer Lubricator, Two Winches, 7X4 Carousel, 18" Table Opening. Rebuilt Top Swivel, New Seals Pressed into Rotary Head, New Rotary Head Oil, Newly Rebuilt Undercarriage, Rebuilt Hendrickson Suspension, Multiple Cylinder Rebuilds, Multiple Hoses Replaced. 2,000" of 4.5" X 25" Drill Pipe available for an Extra Cost.

Honghua; Model:HH-ZJ40DBS; Compressor:None; Mud Pump:See Below; Engine:See Below; Condition:Purchased 5 years ago Never Used; Tools/Options:Honghua HH-ZJ40DBS: Two Drills Available, Purchased 5 Years ago and Never Used, Turned on or Tested. Was part of a set of four, Two have been sold and they were Tested and Worked Perfectly. Each Rig comes with 8 CAT Generators. Helicopter Transportable Rig with 3,000 Kg Loads, Drilling Depth Capacity of 12,000". 146" Mast, Static Hook Load Capacity 716,800#, 6-Pulley with Perforating Cable Crown Block Maximum Load Capacity 716,800#, Monkey Board Capable of DP 5" Range II with Fall Protection Harness System and IR Man Rider Winch, 320 Ton Rotary Table Beam, Height of Drill Floor is 25", Prepared to Receive Walker System Removable by Pins, Moveable in Two Axis. Pin Drive Type Rotary Table with Opening Diameter of 27-1/2" Maximum Rotary Speed of 220 RPM and Maximum Static Load of 1,000,000#. Disc Brake Type Drawworks actuated by 2 Electric Motors with Minimum 870 HP each and Bit Feeder System. Emergency Shutdown Installed in the Doghouse. YM-16 Cathead, 6-Sheave Traveling Block with Maximum Static Load Capacity of 790,000#. Hook Built to API Spec 8C with Maximum Load Capacity of 790,000#. US Warranty/US Bearings. Includes BOP"s 3-1/2" - 4-1/2" IF, DP Elevator 3-1/2" - 5", Pipe Spinner, Manual Slips and Automatic Slips, Casing Spiders, Side Door, Elevators, Aux. Elevators, Slips, Tong, Mud Saver. 8 Sets of CAT Generators 455 kW/60Hz/480V with Soundproof Enclosures, 2 Sets of Cooltech Generators Rated at 200 KVA, SL450 Swivel with Max. Static Load of 1,000,000# Max. Dynamic Load of 630,000# and Max. Rotary Speed of 300 RPM. Kelly Spinner Made by International with Max. Torque of 1,80 ft lbs. and Max. Speed of 150 RPM. Model ST80C NOV with Tubular OD Range of 4-1/24" to 8-1/2" and Drill Pipe Range of 3.5" to 5/5". Type C Drill Pipe tongs with Jaws from 2-7/8" to 5", Type DB with Jaws from 5" to 9-1/2", Type B Casing Tongs from 3-3/8" to 12-3/4" and Hydraulic Drill Pipe Power Tong Made by ECKEL with Hydraulic Backup. 3 Sets of Blowout Preventers, BOP Accumulator, Choke Manifold. 3-Sets of Heli-Transportation Triplex Single-Acting Piston Type Mud Pumps, 6.5" X 9", 3 Sets of Shale Shakers, Mud Cleaner, Degasser, Decanter Centrifuge, 13 Sets of Mud Tanks, Cargo Handling System. Siemens Mud Pits Volume Sensors, WOB Indicator, Torque Indicator, Tong Torque Gauge, Mud Pump Indicators, Bit Tracking System, Digital Drilling Recorded, NOV Deviation Survey Double Recorder, Honeywell Gas Detection System. Diesel Fuel Reserve of 190 bbl. Water Treatment System for Filtering, Purification, Chlorination and PH Control for Daily Water Consumption for the Camps. No Drill Pipe Included.. Condition:

1980, Model:HT-2000; Mud Pump:8X6 Mission; Engine:Detroit 6V53; Mounted On:Trailer; Condition:Ready to Drill; Tools/Options:HT 2000 Year: 1980: All Mechanical, Table Drive Rotary Rig, 18" Table, Mast is approx. 45", Kelly 35", Includes approx., 820" of 4.5" Bottleneck Drill Pipe, Drill Collars, Bits, Hole Openers. More Pipe available. Deck Engine Rebuilt in 2000

2008, Howard Turner; Model:3KDD 5KDD MUSTANG; Mud Pump:Auxiliary GD FZ-FXZ; Engine:CAT C7 260 HP; Mounted On:50" Tandem Trailer; Tires:11R 24.5; Condition:Excellent; Tools/Options:Howard Turner 3KDD 5KDD Mustang (2008): Allison Transmission, Drawworks has PO3-10 Twin Dish Clutches, 8X28 Brakes (2 per drum), 14" Drums, Leabus for 3/4" Cable, 25,000# Single Line Pull, 40,000# Double 120 Chain. 62" X 6" X 3" Mast, 150,000#, Crown has Two 18" Sheaves, Four 15" Sheaves, Six 5" Sheaves, Two 8" Sheaves Winch Line, One Anker Dead Line & Load Cell for 3.4" and 1/2" Cable. 12" Howard Turner Rotary Table, Howard Turner 3" Water Course Swivel, HTB 100 Ton Blocks, Mud Lines, Jib Winch, Water Cooled CAT Engine, Hydraulics: 20 GPM, 2000 psi, PTO Driven from Allison Transmission, 40 Gallon Reservoir. Six Leveling Jacks (37,500# Max.), 40" Stroke, 240 Gallon Fuel Tanks. Optional Equipment: Racking Board, Rig Lights, Catheads, Slips, Tongs, Derrick Climber, Weight Indicator, Hand Rails, Wire Line Units, Welder-Generator, Breakout Cylinder, Snub Lines.

1974, Ingersoll Rand; Model:T4; Compressor:600-150/250 Rotary Vein Rebuilt 2011/12; Mud Pump:None; Engine:PTO; Mounted On:CCC; Truck Engine Make:Detroit 318; Condition:Truck Caught Fire; Tools/Options:Ingersoll Rand T4 (1974): Truck was on fire but rig runs per owner. Rotary Vein Compressor, that was rebuilt 2011/12. Present Owner Owned it since 1980, Only Drilled 8 Wells. Table plate comes out allowing for about a 22" opening. Includes approx. 150" of 5.5" O.D. X 25" Drill Rod.

1979, IDECO ; Model:BIR 7515 800 HP; Compressor:Sullair 125/100; Mud Pump:(2) GD PZ-7; Engine:(2) CAT 3406-C; Mounted On:6-Axle 60 Ton Carrier; Truck Engine Make:CAT; Tools/Options:Ideco BIR 7515 800 HP: 2-Motor 10-Line Drawworks Rated @ 750 HP, powered by 2 CAT 3406-C Diesel Engines & Allison Transmission. 50,000# Main Drum with 1-1/8" LeBus Grooved Sleeve - water cooled. National Swivel, 5-1/4" X 40" Kelly, Foster Spinner, 23" Ideco Table, Martin Decker Weight Indicator, Parmac Hydromatic Auxiliary Brake, 1-1/8" National Deadline Anchor, Koomey Crown Saver, 117" Ideco Kwik-Lift, Telescoping Derrick Rated @ 358,00# w/ 10-Lines, Mechanical, (6) Crown Sheaves, Internally Guyed, Hydraulic Make-up Cathead Rated @ 30,000 ft. lb., Single Line Pull Torque, Hydraulic Break-out Cathead Rated @ 40,000 ft. lb. Single Line Pull, Ideco Sub-Structure. Traveling Block hold 3,500" of 1-1/8" Drill Line, (2) Braden Winches - 12,000# & 10,000# Plus a Man-Rider Winch. Includes: Well Control Equipment, Blow Out Preventers, Casing Stabbing Board, Mud Tanks, Shale Shakers, Desander, Desilter, Mixer, Degasser, All Pipie & Handling Equipment including 9,500" (300 Jts.) 4-1/2" X 32" Range II Drill Rod, Mud Pumps are equipped with Pulsation Dampeners, Pressure Relief Valves, Hoses, Riser, Flowline & H2O Tanks and are Powered by a CAT 550 HP. Rig isequipped with Rig Lighting, External Communication System, Lincoln Welder, Matting, Survey Equipment, Doghouses, Catwalk, Pipe Boats, Complete with all Instrumentation including ADMS System. Rig is Rated @ 3,000 Meters (9,840") with 4-1/2" Drill Rod.