hv 8 rotary table pricelist

The vertical & horizontal rotary table is one of the main accessories of milling machine. As a precision work positioning device, it is widely used for indexing drilling, milling, circumferential cutting, boring and so on.

Our amazing rotary table is made from HT200 casting with high quality. It has already passed the ISO9001 quality system certification. They are are very popular on the market for their superior performance, excellent design and reasonable cost. They are definitely your best choice!

Our rotary table is both vertical and horizontal with two functions. When the vertical position of the table is used together with the tail part, it is also possible to complete circle cutting, indexing drilling, milling and more complicated work.

It"s not difficult for you to adjust the rotary table milling machine. What you should to do is just adjust the handle to the position where you want. Because the precise scale is marked on the dial.

If you purchase our product, we are going to give you a free wrench, 2 positioning keys and screws. When you install the vertical & horizontal rotary table, these accessories will bring you a lot of conveniences.

1.Our Tables are made of high density Meehanite and use "HEIDENHAIN" electronic equipment to inspect angle to assure the excellent quality and durableness.

3.Worm is hardened and ground. The ratio is 90:1. The work table is graduated a full 360° so that one turn of the handle moves the table through 4°. Micro collar is graduated in steps of 1"min. And vernier scale makes settings down to 10 seconds possible.

4.These Rotary Tables are popular for their excellent performance, practical design and reasonable cost. They are widely used for circular cutting work, angle setting, boring, spot-facing and similar work.

Horizontal and vertical fastening. Manufactured from cast-iron. Table has a diameter of 200mm, and it rotates 360 °. Rotation accuracy 0.015 mm. Takes load up to 80kg depending on the type. Transmission ratio 90:1, one hand wheel turn gives 4° on the table. Lying-down height of 105 mm. Cone MT3. Weight 26 kg. Available accessories are dividing plate and tip rest, and then rotary table can be used as dividing machine.

In 1987, Metal - Kovis d.o.o. started as a small company with distribution of used machines and tools. With dignified work and with emphasis on quality and customer satisfaction, Metal - Kovis d.o.o. soon became the leading company in the region for the distribution of used machines.

PM carries the HV-8 with 4 t-slots, but lead time is 4 months out. Another company has the 3 t-slot version. It appears the 10-inch and larger tables has 6 t-slots.

I don"t have any experience with a rotary table. I"ve watched enough setup videos to get a good idea of what it takes to set one up for concentricity. I don"t have a lathe to turn any sort of spindle to aid in the setting up process, but mastering setup is good learning. The reason for looking into a rotary table is that I am planning to make a quill collar for the PM-833T to install a Z-axis DRO eventually. Besides, a rotary table is a necessary accessories for the mill.