hv 8 rotary table quotation

STM 8" Horizontal/Vertical Rotary and Dividing Table, MT3 Center Sleeve - HV-8 - 326505 This HV Type Rotary Table is so designed as to permit machining operations at a higher dimension than that of RT Type Rotary tables .

1.Our Tables are made of high density Meehanite and use "HEIDENHAIN" electronic equipment to inspect angle to assure the excellent quality and durableness.

3.Worm is hardened and ground. The ratio is 90:1. The work table is graduated a full 360° so that one turn of the handle moves the table through 4°. Micro collar is graduated in steps of 1"min. And vernier scale makes settings down to 10 seconds possible.

4.These Rotary Tables are popular for their excellent performance, practical design and reasonable cost. They are widely used for circular cutting work, angle setting, boring, spot-facing and similar work.

1.Our Tables are made of high density Meehanite and use "HEIDENHAIN" electronic equipment to inspect angle to assure the excellent quality and durableness.

3.Worm is hardened and ground. The ratio is 90:1. The work table is graduated a full 360° so that one turn of the handle moves the table through 4°. Micro collar is graduated in steps of 1"min. And vernier scale makes settings down to 10 seconds possible.

4.These Rotary Tables are popular for their excellent performance, practical design and reasonable cost. They are widely used for circular cutting work, angle setting, boring, spot-facing and similar work.

A rotary desk is the revolving plate at the rig"s drill ground that turns the drill string in a clockwise course. The rotary table surrounds the 4 or six-sided kelly bushing and kelly force to which the drill string is hooked up, moving the strength from the rig"s force device to the drill string and bit.

The rotary table hyperlinks the rig"s strength deliver to the drill string, it may be described as a capture. most rigs have a rotary desk due to the fact the top mover for the drill string, however, top strength structures that permit continuous rotation of the drill string have changed the rotary desk, the kelly bushing and the kelly strain in a few rigs, because of changes in trenchless construction requirements.

The rotary force table is familiar in pinnacle-pressure rigs, that is, those who have their pressure motor at the top of the rig. Drill string sections are first linked to the bottom hole assembly. As drill string sections bypass into the bore, extra sections of drill string are connected to the pinnacle strain motor and to sections inside the bore, constructing the drill string from the top. the ones sections of drill string screw collectively the usage of a clockwise movement. The rotary desk -- which turns clockwise -- is used to tighten the segments of the drill string.

This is an accurate designed table for milling, boring and other machine tools. This table allows indexing, facing and other work to be carried out rapidly with extreme precision. Tiliting range 0-90 degrees from horizontal to vertical position, 1 rotation of handle equals 3 degrees, 5 minutes tilting reading.

_Unknown100-CNC1000 LR1000E1000XP1060V1350E1350XP160-CNC1600XP1654 DCM2060 AHR2460 AHR401S24R372500 LR60-CNC750 LR760E760XP800 A 400800 A 600800 A1000800 HD850VA- 56 plusA- 56 plus + APCA- 56TA- 56T + APCA- 6030A- 6040A- 60TA- 7030A- 7040A- 72 plusA- 72TA- 80A- 85A- 90A-110A-110SA-12030A-12040A-130A-140A-160A 5630A 7040A1- 3TA1- 5TA10A12040A2- 5HA2- 5TA2- 7HA3-10HA6AA1165AA1365AA1480AA1565AA1680AA1880AA1890AA2090AA2590AA965ACC 42 SA-iQACC 52 DXACC 52 SAACC 63 DXACC 63 SAACC 64 CAACC 64 CA-iQACC 64 CA2ACC 64 DXACC 65 DXACC 66 CAACC 66 CA-iQACC 84 CAACC 84 CA-iQACC 84 CA2ACC 84 DXACC104 CAACC104 CA-iQACC104 CA2ACC105 DXACC106 CAACC106 CA-iQACC106 CA2AcerADT-450ADT-510ADT-A600ADT-S600AeromatAF- 510AF- 610AF- 650AF- 760AF- 860AF-1000AF-1060AF-1250AF-1400AF-1460Alpha Center V 9LAlpha Center V11LAlpha Center V15LAM 250AM 400AQ1050AQ1265AQ1465AQ1650AQ1665AQ850ASMC-510PASMC-610PAT- 510AV- 510LAV- 610AV- 610LAV- 650AV- 850LAV- 860AV-1000AV-1000LAV-1060AV-1200LAV-1250AV-1300LAV-1460AV-1600LAV-70SAV-97AV-M8AVMC-BMV 660AVMC-BMV 820AVMC-BMV1000AVMC-BMV1600B 1000B 520B 800B 818 IIIB1224 IIIB1640 IIIB2440 IIIB2460 IIIB5B5ACB5AC-WBG 1000BLITZ 30BM- 850BM-1020BM-1200BM-1400BM-1460BM-1600BM-430HBM-460HBM-460TBM-560HBM-560TBM-600HBM-660HBMV 35+ (Gaurav+)BMV 45+ (Agni+)BMV 50BMV 51 (Vayu)BMV 60+ (Chakra+)BMV 65BMV 70 (Astra)BT-280BT-360DBT-380BT-400SBT-450BTC-550BTC-550APCBV- 60BV- 80BV-100BVM 5700BX 40iC 1050C 800 comapctC 860C50-1800CEGA II-542CEGA SS-300Challenger+Chandra+ / Surya+CM-1CM-15CM-20CMX 600VCMX 800VCMX1100VCNC M-128CNC PRO-407CNC PRO-407LCNC PRO-607CNC PRO-607LCNV- 850CNV-1050CNV-1100CNV-1300Compact DrillCompact MillCPV- 550CPV- 750CPV- 850BCPV- 900CPV-1050BCPV-1100CPV-1100BCPV-1200BCPV-1300CPV-1400BCQV- 900CQV-1100CQV-1300CREATOR 100 (round)CREATOR InfinityCS 1200CS 1200 PCS  600CTR 3VCTR 5VCU 2007CU 3007CV- 6 / CVM- 6CV- 7A / CVM- 7ACV- 9A APCCV- 9A / CVM- 9ACV-11A / CVM-11ACV-14B / CVM-14BCV-16B / CVM-16BD21LiB5D21MiB5D21MiB5 ADVD21SiB5DC-45Delta Center T6Delta Center V 6LDelta Center V10LDhruva 3050 HEDhruva 3070 HEDhruva 4050 HEDhruva 4070 HEDM- 800DM- 800GDM-1000DM-1200DM-1200GDM-1400DM-1600DM 42VDM 42VLDM 43VCDM 43VCDDM 52VLDM 65V/40DM(DT)-1DM(DT)-2DM1007DM2016DM3220DMC 650VDMC 850VDMC-909DMC-912DMC-915DMC1150VDMC1450VDMF 180DMF 260DMN-500LDMN-600LDMP 500 2SPDMP 570/50-2SPDNM 4000DNM  400aDNM  400HSDNM 4500DNM 500HSDNM 5700DNM 5700 LDNM 650HSDNM 6700DNM 6700 LDNM 6700 XLDNM 750 IIDouble Column V1613HSDr. Schneider (unspecified)Drill Tap CenterDT 360DDT 400DDT 420DT 420ADT40DTC-400 XLDTC-400 XL-LDV- 800DV- 9A APCDV- 9A / DVM- 9ADV-1000DV-1100DV-11A / DVM-11ADV-1200DV-1300DV-1400DV-1600DV30TDVM 500 IIDVM 650 IIDZ08 FXDZ08 WDZ12 FXDZ12 WDZ15 FXDZ15 SDZ15 WDZ18 FXDZ18 WDZ18 W MAGNUME 1000CE 1100E-216E-422E 850EBM-1000ECO850ecoLine 10ecoLine 15EH 610EH 760EH1000EL 850EM1620LEM2033LEM2040LEMC-1000EMC-1200EMC-1400EMC-2240AEMCOMILL 1200EMCOMILL 1800EMCOMILL 350EMCOMILL 750EOS M 100 (round)EOS M 290EOS M 300-4EOS M 400EOS M 400-4ESAGON linearEV450TEV450T APCEX 10EX-F 1280EXL MillF3F400 (VM)F410DF5F500/50F500/PlusF500DF500VMF510BF550MF600BF600DF650(PLUS/50)F650VMF660MF750BF8F850F960BFB127FD 840 CNCFJV-200 IIFJV-250FLEX MillFM-45FM 50VFMG-1632CNCFNE 30 P (N)FNE 40 P (N)FNE 50 P (N)for M function only (limited at Fanuc a4is/5000)!Forte 65 Single 1320Forte 65 Single 700FP100AFP55LXFSG-B818CNCFSG-C1224CNCFSG-H818CNCFTC-1320VFV-1500AFV-1600(A)FV 50TFV 56(T)(A) / NXV560AFV 56T-APCFV 850SFV 85AFV 965FV102AFV102A-APCFV1050SFV1165FV125AFV1265SFV1365FV1480FV1565FV1680FV1890FV2090FVP-1300(A)FZ08 FXFZ08 MPFZ08 SFZ08 WFZ12 FXFZ12 MTFZ12 SFZ12 WFZ15 FXFZ15 MPFZ15 SFZ15 WFZ18 FXFZ18 SFZ18 S WEEHLFZ18 WFZ18 W MAGNUMFZ18 W WEEHLG 5G 700G1000G500G996GENOS M460-VEGENOS M560-VGF6GMB-2616 CNCGMB-4020 CNCGMT-4000GMT-500MDGMT-500MSGMT-600GMV-2 CNCGMV-3 CNCGMV-4 CNCGMV 6550GMV 8550GS 1000/3GS 600E/3GS 800/3GV- 650LGV- 880LGV-1060LGV-1060LBSGV-1060LSGX 1000GX 1300GX 1600GX 300GX 480GX 510GX 600GX 710GX1000GX1300 (-40)GX1300 (-50)GX1600 (-40)GX1600 (-50)H 7H10H12H1224 IIIH1640 IIIH2440 IIIH2460 IIIH818 IIIHC-435HC-548EXHC-658 IIHC-878HCMC 1100HCMC 1270 #40HCMC 1270 #50HCMC 1370HE- 500LHE- 630LHE- 800LHE-1000LHF3016HF4020HHV 2-MillHHV 3-MillHIT-360DHIT-400HIT-400LHM2010HPC-30Vb-2AQCHQM-1060HQM-1260HQM-1480HQM-1680HS-500HS664 VHSM- 500HSM- 600HSM-1000HSM-1000LHSM 330HSM 510HSTC 3035HSTC 3050HSTC 3070HSTC 4050HSTC 4070HV- 800LHV-1000LHV-1200LHV-1400LHV-1600LAHV-32A-APCHV-40AHV4.5AHV5.5AHV50HV6AHV70i 30 Vi-CUT4000i-CUT400M/Ti-CUT400TDi-CUT4500i-CUT450TIQ300J600JE600JE800JET- 32JET- 32+APCJET- 40JET-1000JRK Mill 10K Mill 8K2X 10K2X 20K2X 8KA-24 / VMM-24KA-32 / VMM-32KA-40 / VMM-40KF4600KF4600CKF5600KF5600CKF6700KF6700CKM-450KM-460KM-520Kmill 10Kmill 8KN-40VaKN-40VbKPC-30aKPC-30bKrypton 5Krypton 6KT-360DKT-420KT-420(A)KT-420(AL)KT-420(L)KT-420DHKX 10L- 660L- 800L- 860L 1000L-1060L 1400L 1600L 2000L 850L2 TableLasertec 12 slmLasertec 30 slmLasertech 45 ShapeLCV 400DLeitz Infinity 12.10.6Leitz PMM-C 12.10.6Leitz PMM-C 12.10.7Leitz PMM-C 12.10.7 UltraLeitz PMM-C 16.12.10Leitz PMM-C 16.12.7Leitz PMM-C 24.12.10Leitz PMM-C 24.12.7Leitz PMM-C 24.16.10Leitz PMM-C 24.16.7Leitz PMM-C 8.10.6Leitz PMM-Xi 12.10.6Leitz PMM-Xi 16.12.10Leitz PMM-Xi 16.12.7Leitz PMM-Xi 24.12.10Leitz PMM-Xi 24.12.7Leitz PMM-Xi 24.16.10Leitz PMM-Xi 24.16.7Leitz PMM-Xi 8.10.6Leitz Reference HP 10.7.6Leitz Reference HP 12.9.7Leitz Reference HP 15.12.9Leitz Reference HP 15.9.7Leitz Reference HP 20.9.7Leitz Reference HP 22.12.9Leitz Reference HP 30.12.10Leitz Reference HP 30.15.10Leitz Reference HP 40.12.10Leitz Reference HP 45.12.10Leitz Reference HP 5.4.3Leitz Reference HP 7.7.5Leitz Reference Xe 10.7.6Leitz Reference Xe 7.55Leitz Reference Xi 10.7.6Leitz Reference Xi 12.9.7Leitz Reference Xi 15.9.7Leitz Reference Xi 20.9.7Leitz Reference Xi 22.12.10Leitz Reference Xi 26.15.14Leitz Reference Xi 30.12.10Leitz Reference Xi 30.15.10Leitz Reference Xi 33.15.14Leitz Reference Xi 40.12.10Leitz Reference Xi 45.12.10Leitz Reference Xi 5.4.3Leitz Reference Xi 7.7.5Leitz (unspecified)LG 1000LG-1280LG 1370LG 500LG 800LH 65LH 87LH108LMC-1000LMV-760 APCLMV-800 APCLV- 60LV- 600LLV- 80LV- 800LLV-100LV-1000LLV-500LV 85LV 85APCLV105LV116LV117LV126LV137LV147LV159LV500LV500BLV500DLVA- 600LM- 860M-1100M-1320M-1600M-1600LM LINE FACTORY LPSM LINE FACTORY MHSM-One 10M-One 10 APCM-One 11M-One 20M-One 40M-One 6M-One 6 APCM-One 60M-One 8M-One 8 APCM-One 80M1M1 cusingM2 cusingM2 cusing MultilaserM400M450M500M550M700M800MA-550VMA-650VMAC-V 1EMAC-V 40MAC-Y520MacroMacro-IMacro-LMacro-SMacro-SKMax Mill 5037Max Mill+ 6055Max Mill++ 7055Max Mill++ 7075Max Mill++ 8055Max Mill++ 8075MaxdrillMB-10QMB-1207MB-14QMB-46VA/BMB-56VA/BMB-66VA/BMB20MC-1050PBMC-30MC 324MC 324 TWINMC 331MC 331 TWINMC 332MC 332 TWINMC 337MC 337 TWINMC 338MC 338 TWINMC-40MC-45MC-500PMC 524MC 524 TWINMC 532MC 532 TWINMC 533MC 533 TWINMC 536MC 536 TWINMC 537MC 537 TWINMC 538MC 538 TWINMC-60MC-800PMCFV 1060MCFV 1260MCFV 1680MCV- 600MCV- 720MCV- 800MCV- 860MCV- 86BAMCV- M5MCV- M7MCV- M8MCV-1000MCV 1000 PowerMCV 1000 RapidMCV 1000 SpeedMCV 1000 SprintMCV 1016 BaseLineMCV 1016 QuickMCV-1020AMCV-1060MCV-116BAMCV-1200MCV-1250MCV-1250BMCV 1270 PowerMCV 1270 RapidMCV 1270 SpeedMCV 1270 SprintMCV-127BA/GAMCV-1300iSMCV-1400MCV-1450MCV-1450BMCV-1500iMCV-1600BMCV 300MCV 380TDMCV 400MCV 500MCV 5000MCV 550MCV 660MCV 750 RapidMCV  750 SpeedMCV 750 SprintMCV 754 BaseLineMCV  754 QuickMCV 850MCV-M11MCV1000MCV1100MCV1400MCV1600MCV300MCV350MCV400MCV450MCV700 NMCV700 N/50MDV55MDV75ME- 655ME- 855ME-1055ME-1060ME-1260MEGA SS-400MEGA SS-400/600Meister G3Meister V3MF-46VA/BMFP 080MFP 125MFP 160microCut 250 SmicroCut 320microCut 520MIKRON HPM 1200 HDMIKRON HPM 600 HDMIKRON HSM 500MIKRON HSM 700MIKRON MILL S 500MIKRON MILL S 600MIKRON MILL S 800MIKRON VCE 1000 ProMIKRON VCE 1200 ProMIKRON VCE 1400 ProMIKRON VCE 1600 ProMIKRON VCE  600 ProMIKRON VCE  800 ProMill Tap 10Mill Tap 20MILLAC 44V IIMILLAC 44V II APCMILLAC 561V IIMILLAC 761V IImillGrind 10millGrind 15Milltap 700Mini CenterMini Mill 560 HDMitutoyo (unspecified)MK 603SMlab cusing 200RMM18MM3017MMV 2000MMV 3200MMV 4200MMV 5200MMV 6200Mora (unspedified)MP-46VMP 6500MSG-618PC-NCMSG-618PC-NCLMSG-818PC-NCMSG-818PC-NCLMT- 800PMT-1400MT-1600MT-30VMT-40VMTV-460 VMCMTV-655/60multiLine 10multiLine 15MV- 64PMV- 650MV- 850MV- 86PMV-1050MV-1050 plusMV-107PMV 154MV 154APCMV 184MV 204MV 205MV 214MV 215MV 234MV 80MV110MVD- 850MVD-1050MVP- 650MVP- 850MVP-1050MVP 8MVP10MVP13MVY130MVY150Mycenter-2XD "Sparkchanger"Mycenter-3XDMyCenter 3XGMyCenter 3XG "Sparkchanger"MyCenter 3XiF "Sparkchanger"Mycenter-3XiGMycenter-3XiG "Sparkchanger"Mycenter-4XD#40Mycenter-4XD#50Mycenter-4XiDMycenter-4XiF#40Mycenter-4XiF#50Mynx 5400 IIMynx 6500 IIMynx 7500 IIMynx 9500(N)FP66A(G)NBP-1000(A)NBP-1100(A)NBP-1300(A)NEXUS 430A II HSNEXUS 430B II HSNEXUS 530C II DMNEXUS 530C II HSNEXUS 700D IINSV 6NSV 66ANSV 9NSV102A(AM)NSV15NSV156ANTV158A(B)NV 4000 DCGNVD 4000 DCGNVD 5000 a1ANVD 5000 a1BNVD 6000 DCGNVM-1166NVX 5060 2. GenerationNVX 5080 2. GenerationNVX 5100 2. GenerationNVX 7000NX 5500 IINX 6500 IINXV1020A (AM)NXV1380ANXV1680ANXV1680BOGP (unspecified)Opitv (unspecified)PC460PC460 HSCPC500PC700PCV-30PCV 400PHS-680PHS-812PHS-912PHS-912 P1PHS-912 P2PHS-916PHS-916 P1PHS-916 P2Picomax 56Picomax 56LPicomax 75Picomax 95PL-1224PL-1632PLANOMAT HP 408PLANOMAT HP 412PLANOMAT HP 608PLANOMAT HP 612PM 150PM 250Power Center V11Power Center V18powerLine 10powerLine 15Precious M 080 (round)Pro 1000Pro 800Pro.E3Pro.E4Pro.E5Pro.E6PROFIMAT MC 607PROFIMAT MC 610PROFIMAT MT 408PROFIMAT MT 412PROFIMAT MT 608PROFIMAT MT 612PROKOS XTPS 65PS 95PS105PX 10PX 20PX 30PX 40Q100Q120Q140Q80QMC- 500QMC- 600QMC- 850QMC-1050QMP-23AQMP-23A-APCQMP-30AQMP-32AQMP-32A-APCQMP-40AQP1620-LQP2033QP2033-LQP2040QP2040-LQP2440-LQP2443QP2560-LQV117QV137QV147QV159QVM-610AllR- 4530R- 5030R- 5140R- 5630R- 600R- 6030R- 6040R-12030R-12040R.Plus-800R450SR4530R46 CNC 1000R46 CNC 600R46 CNC 800R5030R510R560R6040RDX 10RDX 20RenAM 500RenAM 500QRH-20 (Y-500)RH-20 (Y-600)RH-30 (X-1500)RH-30 (X-1700)RH-35 (X-2000)RH-35 (X-2500)RH20RH30RMV 500 APCRMV 700 APCRMV500-APCRMV500TRMV700-APCRMX- 5RMX-50VRX 10RX 20RXP 400RXP 500RXP 501RXP 801RXU 1001S- 500S-3030S-6040S-8(S)MINIMILL (EDU)(S)MINIMILL2S-plus 10S-plus 8S3030S33 APCS500S5000S6040SF 55SF 87SIRIUS-UL+SIRIUS-UM+SIRIUS-UXSIRIUS-UZSLM 125SLM 280 2.0SLM 280 Production LineSLM 500 (HL)SLM 800SM 400DHSMART 430ASMART 530CSMART ISMART IISpeedio F600X1Speedio R450X1Speedio R450X2Speedio R650X1Speedio R650X2Speedio S1000X1Speedio S300X1Speedio S500X1Speedio S700X1SR2SR3Steel CNC 11.7Steel CNC 13.7STP-1428STP-1834STP-1A618STP-2A618STP-618C IISTP-618MStudio 1 CNC MillStudio 5 CNC MillStudio 8 CNC MillSuper WinnerSV- 550SV- 710SV- 850SV-1000SV-1020SV-1100SV-1300SV-1500SV-2414S-FSV-2414S-MSV-2414SE-FSV-2414SE-MSV-2414SX-FSV-2414SX-MSV-33SV-33+APCSV-33HSV-41SV-41+APCSV-41HSV-4328STSV-4328SXSV-48SV-48HSV-5128STSV-5128SXSV 550SV-6332SXSV 760SV 815SV 85SV105SV1050SV1150SV116SV126SV1300SV1350SV1630SVG-4323SVG-4323ASVL-2416S-FSVL-2416S-MSVL-2416SE-FSVL-2416SE-MSVL-2416SX-FSVL-2416SX-MSVL-3320S-FSVL-3320S-MSVL-3320SE-FSVL-3320SE-MSVL-3320SX-FSVL-3320SX-MSVL-4020S-FSVL-4020S-MSVL-4020SE-FSVL-4020SE-MSVL-4020SX-FSVL-4020SX-MSVL-4525SE-FSVL-4525SX-FSVM 4100SX 10SX 4SX 6SX-7050 S36BSX 8T 3600DT 4000/HPT 4000 HST 4000LT500T700Tachyon 4Tachyon 5Tachyon 7TC- 510TC- 710TC- 710 plusTC-1200TC-40VTC300RTC500RTC700RTD- 510TD- 710TD 300TD 500ATD 700TECHSTER 104TECHSTER 105TECHSTER 106TECHSTER 125TECHSTER 126TM-1(P)TM-2(P)TM-3(P)TMV-510AllTMV-510CIITMV-710ATMV-710CTP 510TP 510-APCTR-45ETR-510TR-51ETR-563STR-56STR-600TR-700TRAK 2OPTRAK DPM SX2PTRAK DPM SX3PTRAK DPM SX5PTRAK K3 EMXTRAK K3 SXTRAK K3 SX-3TRAK LPMTruPrint 1000 (round)TruPrint 3000 (round)TruPrint 5000 (round)TS-45TV-1600LTV-500TV-700TV116BTV116B-APCTV146A(B)TV158BTVMC330TVT324LTVT324M1TVT324STW- 31-MCOTW- 40-LTW- 40-MCOTW- 50-MCOTW-4021-LTW-4025TWH-6031-MCO #40TWH-6031-MCO #50TWL-18TWL-24TWL-40TZ15 STZ15 WU3 620 CompactU3 630 AdvancedU4 1520 CompactU4 1530 AdvancedUH430LUH650LUPZ 525 NC IIV 100LV-12iPV-16V-20SV-22iF/iRV-24V-30iF/iRV-30MV-30SV-32V-32AF/ARV-32iF/iRV-40iLV-42AF/ARV-42iF/iRV 480V 480 APCV 50V-50LV-52AF/ARV 6V-60iV-60SV 610BV 70V 710V 760BV 760LV 7AV 80V 9V.Plus-550V.Plus-800V10V100V1000V1000BV11V110V110THV110y-12THV12V120V120DV13V130V130y-12THV1320V140V140DV15V160V160DV175PV182V2V2.5V21i-RV21i-SV22V22 GRAPHITEV220PV232FV2A-XPV3V3 TTV33V332FV33iV33i GRAPHITEV3A-XPV3EC MAXIMILLV4V4.5V43V4A-XPV5V5.5V56iV6V60V700V76DV77(40 Taper)V77(50 Taper)V77 GRAPHITEV85V85TVA-500VA-500L3VA-500MVA-750L3VB-1400AVB53VC 1150VC 1650VC 3600VC 430VC 450VC 510VC-608VC-610VC-711VC 750VC-Primos 400 SGVC-Primos 400 SG APCVC0852VC1052VC1200VC15VC51Vcenter- 55Vcenter- 70Vcenter- 85A/B/CVcenter-102A/B/CVcenter-102EVcenter-110Vcenter-130Vcenter-145Vcenter-165Vcenter-A 72Vcenter-A 85Vcenter-A110Vcenter-A130Vcenter-P 76Vcenter-P106Vcenter-P136VCM-1050VCN-430AVCN-530(535)CVD 510VDF 1200VDF 1500VDF 850AVDL 1000VDL 1200VDL 1200PVDL 1300VDL 1400AVDL  600AVDL  800VDR 1000VE-1020L3VE-1500L3Versa 823VERTEX 55 IIVERTEX 75 IIVESTA-1000+VESTA-1050BVESTA-1300BVESTA 500TVESTA 610DVESTA 660VESTA 850BVF-1VF-1YTVF-2(SS)VF-2(SS)YTVF-3(SS)VF-3(SS)YTVF-4(SS)VF-5/40(50)XTVF-5/(SS)(40)(50)VF-500VF-6/(SS)(40)(50)VF-700VF-Mill 2317 DuoVF-Mill 3025 DuoVF-Mill 3317 DuoVF-Mill 4025 DuoVF-Mill ECO 1000VF-Mill ECO 1100VF-Mill ECO 1155 StrongVF-Mill ECO 1300VF-Mill ECO 1500VF-Mill ECO 1890 StrongVF-Mill ECO 600VF-Mill ECO 900VF-Mill ECO MiniVF-Mill HP 1165VF-Mill HP 1365VF-Mill HP 760VF-Mill HS 1600 DuoVF-Mill HS 650 DuoVF-Rapid Tap 48.12VF1000VF650VFP-1000(A)VH- 650VH- 650L/L3VH- 850VH- 850L/L3VH-1010VH 510VH 610VH 850VH1000VH1100VH1300VHG 850VHG1000VHG1104/VHG1105VHG1304/VHG1305VK-1060VL 550VL 610VL 850VL1000VL1200VL1300VL1600VL30VL50VM 10HSiVM 10iVM 1260VM-2VM 20iVM-3VM 30iVM-350VM 43RVM-45S(A)VM 510DVM 53RVM 5400VM-6VM 601DVM 601DSVM 6500VM 702H/SVM 702HL/SLVM 750VM 760VM 76RVM 802TVM 903H/SVM 903HL/SLVM 903VVM 905TVM1000VM1103H/SVM1103HL/SLVM1204HA/SAVM1207BVM1304H/SVM1506H/SVM1706H/SVM1806H/SVM2515VM3018VM3018ILVM4020VM4222ILVM5020VM5025ILVM5025XPVM6030ILVM6030XPVM660RVMC- 850VMC- 850+APCVMC- 855VMC- 966VMC 1000VMC 1000 (HS)VMC 1000BVMC 1000LVMC 1000MVMC-1050+APCVMC 1050-DMVMC 1050-PVMC 1060-DMVMC 1060 HSVMC 1060-PVMC 1100VMC-1160VMC 1200BVMC 1200LVMC 1200MVMC 1250VMC 1260-DMVMC 1260-PVMC-1270VMC 1300VMC-1300-2H (NO.40)VMC-1300+APCVMC 1300 (ISO 50)VMC-1300 (NO.40)VMC-1300HD (NO.50)VMC 1300LVMC-1370VMC 1400VMC 1400LVMC-1470VMC-1490VMC 1500BVMC 1500LVMC 1510 HDVMC 1570VMC 1580VMC 1600VMC-1600+APCVMC 1600BVMC 1600FVMC 1600LVMC-1688VMC-1690VMC-1724VMC-1824VMC-1832VMC-2015 HS-IIVMC 2016VMC-2040LVMC-2060LVMC-2240XLVMC 2414 EVMC 2418VMC-2443VMC-2451VMC-2520 R-IIVMC-3016LVMC 3018 EVMC-3320 R-IIVMC-3320BVMC 400MVMC 4020VMC-4020 B-IIVMC 4020 EVMC-4220BVMC 430VMC-4324B 50 TaperVMC-4729BVMC 500LVMC 500MVMC 600VMC-6030 B-IIVMC 610LVMC 610L/SVMC 640-DMVMC 640-PVMC 650 (HS)VMC 650BVMC 650EVMC 700BVMC 700PVMC 710LVMC 800 (HS)VMC 800MVMC 8035VMC 850-DMVMC 850 nvuVMC 850-PVMC 850BVMC 850EVMC 850LVMC 850L/SVMC 850PVMC 860VMC1000BVMC1000PVMC1020L/SVMC1100BVMC1100PVMC1300BVMC1300PVMC1300SVMC1600BVMC1600PVMC1600SVMM- 137+ / VMC- 137+VMM-116A / VMC-116AVMP-23(A)VMP-23A-APCVMP-30(A)VMP-32(A)VMP-32A-APCVMP-40(A)VMP-45(A)VMP-50(A)VMX 24HSiVMX 24iVMX 30HSiVMX 30iVMX 42HSiVMX 42iVMX 50iVMX 60iVMX 64iVMX 84iVP- 6VP- 8VP-10VP-1100VP-1500VP 400VP 500 2APCVP 600VP9000VQ1060VQ650VR4325XPVS-652VT500VTC-200B IIVTC-200C IIVTC-300C IIVTC-40aVTC-40bVTC-530VTC-560/25VTC-760VTC-800(820)/20SRVTG-1065/1065L3VTG-1165/1165L3VTG-1365/1365L3VTG-1565/1565L3VTH- 855L3VTH-1055L3VTJ-1480VTJ-1680VTP-1061VTP-1261VTT- 540VTW- 540 APCVU- 5VU50AVU65AVX- 660VX 10VX-1000VX 12VX 15VX-1500VX 6VX 6500 C/GVX 8VY2221PVY2232PVY232FVY332FWE30VEWE30VE APCWerth (unspecified)WINSTARWINSTAR SPWV108A (B)X LINE 2000RXC 4000DA-2SPXP-24XP-32XP-45XR 1000XR 1300XR 1600XR 760XR1000XR1300XR1600XV 1060XV 1270XV 1370XV 1485XV 1570XV 1670XV 1690XV 450XV 610XV 710XV 850YBM  640VYBM 9150VYBM  950VYMC  430Zeiss (unspecified)ZX-1060 S36BZX-1060 T15ZX-1060 W24B85010001500

A wide variety of hv rotary table options are available to you, such as manufacturing plant, machinery repair shops and energy & mining.You can also choose from 1 year, 6 months and 1.5 years hv rotary table,As well as from not available, {2}, and {3}. and whether hv rotary table is bearing, gear, or motor.

A wide variety of hv rotary tables options are available to you, such as manufacturing plant, machinery repair shops and energy & mining.You can also choose from 1 year, 6 months and 1.5 years hv rotary tables,As well as from not available, {2}, and {3}. and whether hv rotary tables is bearing, gear, or motor.

This page is the page of Rotary Table Outer Diameter 152mm and others sold by AS ONE CORPORATION. AXEL GLOBAL is a website that lists more than 1.5 million products that are used in a wide range of fields, including Research and Development, Production,Semiconductor, Medicine, Nursing care, and Food sanitation.

TSL vertical&horizontalrotary table is one of the main accessories of milling machine, it is used for index boring, milling, circle cutting, spot facing and boring hole etc on the milling machine. The rotary table in vertical with working together can be used on complex work for circle index boring and milling.