tsudakoma rotary table parts made in china

The graphs below show the required indexing time which includes the time for the control command for the machine tools. This information helps you examine the cycle time of your process with the the NC rotary tables. Table rotation speed and acceleration and deceleration constants may differ depending on the model of the the NC rotary tables. If any data other than that shown below is required, please ask us.

FANUC αi type servo motors are specified for each NC table model in the specifications table. The table below shows other servo motors, which have equivalent capacity to those of FANUC αi motors.

Note 2: The motors shown above are classified according to motor torque capacity. The motor which is suitable for your machines depends on the specifications of your machine NC controllers. Contact the machine manufacturer about motor selection.

After adding four-axis or five axis rotary table on the machine tool, multi axis machining can be realized, which can improve the machining efficiency and yield. With the improvement of manufacturing automation in China, the demand for rotary table increases significantly.

Now, I will introduce the situation of several rotary table brands in China. We will divide them into four categories: Europe andAmerica, Japan, Taiwan and Chinese brands.

Japan: Fanuc, Nikken, Tsudakoma, Kitagawa and Sankyo are major brands. They are mainly configured on machine tools of some Japanese brands. Some factories will also be equipped with them  when machining precision parts. Fanuc has the largest market share with, because robodrill is most widely used in 3C industry in china, so many factories are equipped with its DDR

Taiwan: TJR, Detron and GSA are the main brands, as well as DEX, Autocam and HW. These rotary tables are not only configured on Chinese brand machine tools, but also sold to end customers. Their precision is not high and their service life is not long, but they can meet the requirements when machining parts with low precision. Some users will consider these brands when their budget is limited. Among these brands, TJR has the best sales volume, with an annual sales volume of more than 10000 sets, because they have the most complete distribution network, complete models and cheap prices.Most importantl

China: there are many locally four-axis brands in China, such as Gutia,Silvercnc, Blue tech, CP and Deshu. The product quality of these brands is comparable to that of Taiwan. Due to more favorable prices and fast delivery, they have occupied the market of most Taiwan brands. The four axis of Chinese brands mainly adopt roller cam structure or harmonic structure. The wear resistance of roller cam is better than that of worm gear, with long service life and good accuracy retention. The price of harmonic reducer rotary table is low, which is suitable for 3C industry. These two structures meet the needs of the market and have been recognized by customers.

With over 37 years of experience we are the exclusive importer, national distributor and service center for Tsudakoma rotary tables, Alberti angle heads & live tools, Romai angle heads, tool presetters and swiss tools.

Our 25,000-square-foot facility features a completely equipped machine shop, state-of-the-art inspection equipment, a product demonstration showroom, and a multi-million dollar new product and spare parts inventory.

Fourth- and fifth-axis rotary tables bring added flexibility to conventional three-axis VMCs. At IMTS, Koma Precisionintroduced the Tsudakoma RG series of rotary tables that uses a ball-drive system for table rotation.

The Third-Party Rotary provision provides access to the rotary parameters in the Haas control, allowing you to use a third-party single- or two-axis rotary table on your Haas machine. The option supports full simultaneous machining up to 5 axes, and is compatible with Dynamic Work Offsets and Tool Center Point Control. It is the responsibility of the customer and the third-party manufacturer to troubleshoot and fine tune the different parameters. Requires the purchase of the 4th-Axis Drive option to operate a single-axis rotary, or the purchase of both 4th- and 5th-Axis Drive options to operate a two-axis rotary.

Different types of wholesale tsudakoma manufacturers are ideal for other sewing projects. Single needle machines and sewing machines with an embroidery module or combined sewing machines are available through manufacturers and suppliers. Multi-needle professional machines have between 4 and 10 needles, and it depends on what suits your needs. You can choose from different machines for your next project. Some machines are for sewing, and some are for embroidery work. If you have a sewing machine and want something essential for mending garments, this machine is perfect for you.

tsudakoma manufacturers products are available with several options to choose from; before choosing a device, it"s essential to know what you what in a machine. The number of options has its features. Before selecting a machine, it is necessary to understand your requirements for machines. To understand your needs, it"s essential you know what features you require. The machines are an excellent source for all types of embroidery equipment. If you"re interested in finding a solution for your embroidery or sewing business, contact the listed manufactures and sellers for future correspondence. Request a price quote from a wholesaler for machine specifications. Buy a machine at a great price with Alibaba.com, including accessories and thread and sewing needles. Find industrial machines with competitive prices at Alibaba.com.

Alibaba.com has incredible savings for tsudakoma manufacturers as well as new and used machines. Suppliers and manufacturers have products ranging from simple to high-end. Browse the inventory and contact us for what information you would like to see.