robertshaw safety valve supplier

Robertshaw® has been creating and implementing innovative solutions throughout its history. Robertshaw continues to develop ground-breaking solutions that make products more effective, more efficient, and more attainable.

The Robertshaw® TS Series Thermomagnetic Safety Valve is a control used to cut off the flow of gas to the burner in the event of a pilot outage. The magnet assembly is energized by voltage generated by a thermocouple that is heated by the pilot flame. When this flame is extinguished, the thermocouple voltage decreases until a spring overcomes the magnetic force and closes off both the pilot and main gas. This control can be used for commercial and residential ovens, infrared heaters, chicken and pig brooders, recreational vehicle gas appliances and many more applications requiring automatic safety valves.

The Robertshaw® 1720 Series Thermomagnetic Safety Valve is a control used to cut off the flow of gas to the burner in the event of a pilot outage. The magnet assembly is energized by voltage generated by a thermocouple that is heated by the pilot flame. When this flame is extinguished, the thermocouple voltage decreases until a spring overcomes the magnetic force and closes off both the pilot and main gas. This control can be used for commercial and residential ovens, infrared heaters, chicken and pig brooders, recreational vehicle gas appliances and many more applications requiring automatic safety valves.

The Robertshaw 1720 Series Thermomagnetic Safety Valve is a control used to cut off the flow of gas to the burner in the event of a pilot outage. The magnet assembly is energized by voltage generated by a thermocouple that is heated by the pilot flame. When this flame is extinguished, the thermocouple voltage decreases until a spring overcomes the magnetic force and closes off both the pilot and main gas. This control can be used for commercial and residential ovens, infrared heaters, chicken and pig brooders, recreational vehicle gas appliances and many more applications requiring automatic safety valves.

The Robertshaw 700 series 24 volt combination gas valves offer replacement flexibility. With capacities ranging to 720000 BTU, 3-position outlets and multi-positional capability, these combination gas valves offer unlimited replacement possibilities. The 24 volt Uni-Kit models are suitable for either natural or LP gas. The valve is factory set at 3.5 Inch WC natural gas. A regulator cover plate is included to convert to LP gas. Reliability, performance, flexibility and ease of installation and service in one compact control. Models that have a safety magnet have a notched or slotted magnet for applications requiring the use of an ECO energy cut-off switch. The automatic pilot safety valve is separate from the gas cock and provides gas shutoff in case of pilot outage. Valves can be mounted in any position except upside down.

Robertshaw Controls Combination Gas Valve, Series: 700, 1/2 x 3/4 Inch Size, FNPT, 240000 BTU/hr Capacity, 1/2 psi, -40 to 175 deg F, 24 VAC at 50/60 Hz, 0.2 amp, Natural, LP Gas, 1/4 Inch Tube Pilot Gas Connection, 3-1/2 Inch WC Natural Regulator Adjustment

Robertshaw 1/2" FPT Natural Gas Safety Valve , 3-3/4" Width, 3-1/2" WC, 1/4" CCT Pilot Out Only , 24 VAC/ 12 VDC, Red and Blue Wires , 300,000 BTU, Screw In Type Thermopile , With Slotted Thermopile Magnet , 7/16"-27 Brass Thermopile Holding Nut , 3/8"-38 Thread For Magnet , 750 MV, 500MV Underload , 1/2" x 38" Reducer Bushings