60 psi safety valve manufacturer

Air compressor tank safety valve. This valve is rated to 60 psi and has a maximum CFM discharge rating of 59cfm. This valve utilizes 1/4" NPT Male threads.

Brand new, certified 1/4" male NPT 60 PSI Industrial air compressor / tank pressure safety relief valve. Also known as a "Pop Off" or "Blow Off" valve. This relief valve is manufactured in the United States and is stamped with "UV" & "NB" symbols. The relief pressure of this valve is set at 60 PSI and is accurate within + or - 3% of the set pressure.

• This valve will relieve 59 SCFM• Valve Inlet Threads: 1/4" Male NPT (measures about 1/2" in diameter)• Total Valve Length: 1-3/4"• Installation Wrench Size: 11/16"• Features a silicone rubber soft seat relief valve to prevent leaks•Max temperature: 250° F• Solid Brass Construction• Top quality made in the U.S.A• Manufactured by Conrader

•Relief Valves ASME Approved •Help ensure safe operation of your compressor system by guarding against tank over pressure by quickly releasing excess pressure •Machined from brass bar stock •Silicon rubber soft seal to ensure a tight, leak-free seal •Manual pull ring allows for testing and system pressure relief •ASME/National Board Approval & Canadian Registration

60 Psi Pop Off Valve. We have hundreds of different parts and accessories for your truck, mixer and/or fleet. If you need help locating a certain part or accessory please don"t hesitate to contact our parts team at 507.374.2239.

... -start valve with Series MX2 air treatment units without the need for additional connection interfaces. The soft-start valve is positioned upstream of the safety valves, ...

Two hands safety valve, which allows a safety use of two hands pneumatic controls (for example two push-button 3/2 N.C. to a certain distance) excluding false signals in case of push-button ...

The SI2 safety valve prevents the allowed operating pressure from being exceeded by more than 10%. If, after opening, the adjusted response pressure falls ...

... stainless steel full-lift clean service safety valve designed to AD Merkblatt A2 and TRD 421 standards and suitable for pure steam, vapour and inert gases.

Insert style flow control valves are comprised of a precision orifice in parallel with a check valve, combined into a single component. Each is designed for easy installation into metal housings using ...

Press-in style flow control valves are comprised of a precision flow orifice in parallel with a check valve, combined into a single component. Each part is designed for easy installation into plastic ...

If you have been searching for a safety release valve that you can use to reduce short-term pressure surges successfully and diminish the effects of gas leaks, this is the product for you. With a pe of ...

... have been type tested as well. These pressure regulators have safety valves which will slam shut in the event of emergencies, such as the gas reaching too high a pressure level. The valve ...

This product has hydraulically actuated class A gas safety valves to EN 161 used for automatic shut-off. It shuts off when unstimulated for gas and air, or even biologically produced methane. It has AISi ...

The S 104 Safety Shut Off valve is mainly used to avoid any damage to components as well as to avoid too high or too low pressure in the gas train. This could cause high financial losses and/or injured ...

The S50 Safety Shut Off valve is mainly used to avoid any damage to components as well as to avoid too high or too low pressure in the gas train. This could cause high financial losses and/or injured ...

The S100 Safety Shut Off valve is mainly used to avoid any damage to components as well as to avoid too high or too low pressure in the gas train. This could cause high financial losses and/or injured ...

... Pressure Safety Valve + Rupture Disk is protected and may be utilized autonomously as essential security gadgets or in conjunction. There are 3 possible combinations. The first combinations ...

Excavator pipe-rupture valves prevent uncontrolled cylinder movement in the event that a pipe or hose bursts. The ESV valve fulfills all of the requirements of the ISO 8643 and EN 474-5 standards for ...

Material: Body- CF8M; Valve Seat- CF8M Métal Seat, PTFE Soft Seat available Orifice Size: fc"(15mm), 3/4M(20mm), l"(25mm), l1/4,’(32mm)I ltë”(40mm), ...

The Safety valves from ATOS are designed to guarantee protection for application on various devices, especially those that monitor spool position. They are also recommended for hydraulic ...