baso pilot safety valve price

The H15 Series pilot valves provide safe lighting and complete shutoff of pilot and main burner gas in the event that the flame heating the thermocouple is extinguished. They are designed for standing pilot applications and can be used with natural gas and Liquefied Petroleum (LP) gas, at pressures up to 0.5 psi. Typical applications include commercial cooking equipment, heaters, kilns, dishwashing equipment, industrial ovens, and similar applications.

High pressure design allows use on gas pressures up to 25 PSI. Pilot gas is taken from within the control. Gas will pass to both pilot and main burner when reset button is depressed (H19RA 3/8" threads). Gas will not pass to the main burner equipped with flow interupter (H19LA 3/8" threads or the H19NA 1/4" threads) when reset button is depressed. Loss of signal from thermocouple shuts off both main and pilot burners. For complete specs on these Baso Valves, download the PDF below.

1 Safety Valve * Pilot Safety Valve. 1 . 100% Shutoff. 740000 BTU @ 1 Drop. Max Inlet 1/2 PSI reset Button Allows Gas Flow To Pilot When Depressed. Use With 30Mv Thermo- Couple.

Gas Safety ValvesThese valves automatically control main gas flow. Our automatic pilot valves shut off both the main and pilot gases. Pilot gas is tapped from the main line within the control. Gas will flow only to the pilot burner when the reset button is depressed. The manual pilot valve stop can be adjusted for maximum pilot flow.

Pilot BurnersThese “J Series” combination pilot burners are universal replacement pilot burners and are supplied in three models. Mounting brackets on all four sides of each burner permit adaptation to almost any application. We also offer pilot burner fittings (R Series) and replacement flame sensors and inlet fittings (Y Series).

3/4 Safety Valve * Pilot Safety Valve. 3/4 . 100% ShuT0Ff. 402000 BTU @ 1 Drop. Max Inlet Press 1/2 PSI. Reset Button Allows Gas To Flow to The Pilot Burner When Depressed. Use With 30Mv Thermocouple. 1/2 & 3/8 Bushing