adjustable safety valve manufacturer

Distributor of hydraulic press safety, quick opening safety, rotary and safety valves. Amerigear®, Boston Gear®, Carlisle®, DeMag®, Desch® and IMI Norgren®, pneumatic, double action, quick release and flow control valves also provided. Repair and preventative maintenance services are offered. Value added services such as custom barcoding, CAD capabilities, OEM assembly, plant surveys and third party logistics are also available. Serves the metal processing, metal service center, paper mill and paper converting, canning, grinding, commercial laundry, marine, oil and gas and material handling industries. Vendor managed inventory (VMI) programs available. Kanban delivery.

HiP relief valves are now available with CE marking. These products will proudly be marked with the CE symbol, signifying they comply with the stringent requirements of the Pressure Equipment Directive (PED). To order, add -CE to your relief valve part number.

Standard W60 Adapter:The ‘standard’ adaptor is used on all models of short and long stroke W60 Series valves. Machined from SS 316L bar with a thick cross-section, the adaptor adds strength to the valve body and provides alignment for the stem. The outer perimeter seals to the valve body with an o-ring that is located forward to the product zone to minimize crevices. The product stem passes through the adaptor and is sealed to the adaptor with an o-ring. A Teflon® bearing guides the stem and takes up the mechanical loading imparted by hydraulic forces. This increases the service life of the stem seal. Adaptors are made in 1"-6" (25mm -152mm) sizes.

W80 Adapter: This adaptor is used to convert a ‘standard’ W60 series valve to a W80. The outer perimeter seals to the valve body with an o-ring that is located forward to the product zone to minimize crevices. The product stem passes through the adaptor and is sealed in the upper part and the lower part of the adaptor with o-rings. The space between the o-rings is flushed with a suitable liquid or steam. The Teflon® bearing is located in the flushed chamber. Adaptors are made in 1"-6" (25mm - 152mm) sizes. For vacuum-rated, extended shelf-life (ESL) applications, the W80A adaptor adds steam trace to the adapter-to-valve body connection.

Wiping Stem Seal Adapter: For high-risk and hard to clean product applications, the wiping stem seal fills the gap between the product zone and the traditional o-ring stem seal. The adaptor is a two-piece design to allow easy inspection or replacement of the wiping stem seal. The outer perimeter seals to the valve body with an o-ring that is located forward to the product zone to minimize crevices. A Teflon® bearing is used to guide and support the valve stem.

FPPI Adjustable Pressure Relief Valves: Used in "grid" type and residential sprinkler systems or when pressure relief is required. Adjustable from 75 to 175 PSI*.

At iPolymer, we offer a wide-range of plastic valve products that also include pressure relief valve options to accommodate the requirements of industrial and commercial customers. The PTFE fully adjustable pressure relief valve we offer is one of our premier valve products.

Pressure relief valves, also referred to as safety relief valves, are triggered to open at a designated pressure and expel fluid until the pressure reduces to an acceptable level. In its operating condition, this pressure relief valve is typically closed until upstream pressures increase to a predetermined set pressure. When that set pressure is reached, the valve opens, and continues to open wider, enabling additional flow as the pressure increases. The valve starts to close again when the upstream pressure drops to a few PSI below the set pressure.

A 100-percent pure PTFE Valve Body and Valve Plug are used in the manufacture of the iPolymer Pressure Relief Valve (PRV). The single O-ring design enables the user to choose EP, Viton, or Kalrez (FFKM eq.) according to the flowing media. The PRV we offer is factory-configured for a pressure between 10 psi and 90 psi.

Within the above-mentioned pressure range, this PTFE pressure relief valve is fully adjustable by the means of a simple adjustment to the upper Socket Hex Adjustment Screw and then a simple lock-in-place with the associated locking nut. The three upper housing and lower base configuration options available with our PRV are: Polyvinylidene Fluoride (PVDF), Polypropylene (PP), and Anodized Aluminum (AA).

For additional information about the adjustable PTFE pressure relief valve options we offer, call us today at 949.458.3731, complete our contact form, or request a free quote through our website.

Adjustablepressure relief valves, as their name suggests, are mechanisms whose primary objective is to relieve (or perform what we call a by-pass) pressure, but in a fully controlled way. If we talk about a pressure and temperature relief valve, you will also consider the latter.

As we talk about an adjustable pressure relief valve, the pressure threshold that will mark what the release point can be adjusted can be adjusted by the pressure exerted by the spring. Usually, this is achieved by a screw that goes through it and that must be tightened or loosened as desired.

SRVH valves come equipped with springs coresponding to thier colored band. Pressure ranges varry as follows: Color Pressure Designator

Superlok tube fittings and valves have been designed and manufactured under the strictest material management, high precision machining and the best process technology. They provide a reliable, leak proof seal under severe conditions and can contribute to productivity improvement because of the superior machined surfaces on the inner surface of each tube fitting and valve.

Standard materials include 316 stainless steel bodies and seat glands. Relief Valve – Manual Adjustable IN: 2x 1/4″ NPT Female OUT: 1/4″ NPT Female – From 1000 Psi to 10000 Psi working pressure

Adjustable Safety Valve - Air compressor safety valve is adjustable for protection of overpressure devices. | Stainless Steel Fittings for Medical and Semiconductor Sectors Manufacturer | CHIBIN Machine Co., Ltd.

Based in Taiwan since 1980, CHIBIN Machine Co., Ltd. has been a stainless steel pipe fittings manufacturer. Their main pipe and tube fitting products, include Adjustable Safety Valve, tube fittings, compression fittings, rapid pneumatic fittings, push-in pneumatic fittings, hydraulic fittings, high pressure pipe fittings, quick couplings, nozzle and needle valves, which are specialized in medical and semiconductor sectors.

Industry leading pressure and safety relief valve designs with over 140 years of technical and application expertise providing custom engineered solutions for O&G, Refining, Chemical, Petrochemical, Process and Power applications. Our designs meet global and local codes and standards (API 526; ASME Section I, IV & VIII; EN ISO 4126; PED & more). Gain insight into the performance of your pressure relief valves with wireless monitoring.