bialetti safety valve replacement quotation

Been using my Vigano stovetop coffee pot on an electric stove for about 6 years. When I first got it I meticulously filled it to just below the safety valve yet was still scared to death of the thing blowing up if I left it too long on the hot ring. Immediately it began to glub and blub Id take it from the hot ring and stand back until it became quiescent.

That was then! I gradually discovered that as long as one does not too strenuously tamp the coffee in the basket (an unnecessary step in any case), filling the base to above the valve and leaving the pot on a low, low setting after it has "perked", is perfectly safe and gives me several cups of HOT coffee instead of one hot and the rest increasingly cooler.

PART NUMBERS & MANUFACTURERS REFERENCE: Many of the parts on sale are supplied by the original equipment manufacturers (OEM) whilst others are offered as suitable replacements or alternatives. Any references made to specific manufacturers and OEM part numbers are for guidance and identification purposes only and does not imply that any parts supplied are purchased direct from the OEM. Parts supplied as alternatives may differ from the OEM"s exact specifications.

The devil is in the details. It is often the smallest things, the particularities, that make all the difference. This is also the case in regards to the preparation of a good coffee, a ritual in which all the steps and every single component play a fundamental role. Among all, one of the most important elements is the Moka valve. Often ignored, it is vital not only for the quality of the coffee, but also for the safety of those who prepare it.

The valve was born with the invention of the Moka Express in 1933. It is a safety valve positioned on the bottom chamber. To better understand the importance of the valve and its use, we need to take a step back and illustrate step by step

This is where the valve of the Moka comes into play. It must open when the pressure is too high. By doing so, it allows the steam to escape regularly, without causing any damage. In short, the Moka’s safety valve provides security. Hence, it should only intervene when the coffee maker is used under abnormal operating conditions.

A long-standing and debated question: how far can you fill the bottom chamber for a state-of-the-art coffee? The Moka valve can come in handy to answer this dilemma. Another important role of the valve is that it acts as a "measuring cup". Its position on the bottom chamber is not accidental. Rather, it indicates to those who prepare the coffee the correct amount of water to use. The only exception is for some special coffee pots that are already equipped with a measuring cup. Ideally the water should reach just below the safety valve.

The Moka valve, therefore, is not a decoration or a mere design element. Rather, it is a very important component for the correct functioning of the coffee maker. It guarantees safety and plays a part in the making of an excellent coffee.

Consequently, it is necessary to keep it clean and maintain it regularly. For example, using tap water to make coffee brings with it the risk of limescale deposits obstructing the hole in the valve. The resulting danger is that it could get clogged.

We have seen that one can simply use hot water to clean the Moka valve. To avoid limescale obstructions, simply move the piston that comes out of the valve along its axis when washing it. To ensure the Moka functions correctly, it is recommended to repeat this checkup periodically.

The moka pot is a stove-top or electric coffee maker that brews coffee by passing boiling water pressurized by steam through ground coffee. Named after the Yemeni city of Mocha, it was invented by Italian engineer Alfonso Bialetti in 1933 and quickly became one of the staples of Italian culture.Bialetti Industries continues to produce the same model under the trade name "Moka Express".

The boiler (marked A in the diagram) is filled with water almost up to the safety release valve (some models have an etched water level sign) and the funnel-shaped metal filter (B) is inserted. Italians generally do not preheat the water used, though established baristas such as James Hoffmann and Tristan Stephenson recommend using preheated water in the base.

A gasket ensures a tightly closed unit and allows for pressure to safely build up in the lower section, where a safety valve provides a necessary release in case this pressure should get too high.

Moka pots require periodic replacement of the rubber seal and the filters, and a check that the safety release valve is not blocked. When the rubber seal is new, it might alter the coffee taste, so a couple of "dry runs" can be made, without coffee or with used coffee grounds to "prime" it. It is an urban myth that leaving coffee stains in a moka pot is preferable – the rancid coffee should be scrubbed out of all parts of the pot. Moka pots are generally not dishwasher safe.

The moka pot comes in various sizes based on the number of 50 ml (2 imp fl oz; 2 US fl oz) espresso cups they produce. The following table are the standard sizes for the Bialetti Moka Express.

A few companies have introduced variations to the Moka pot design. One such design has incorporated a weighted valve called Cremator or Cremavent as a pressure regulator on top of the nozzle that allows pressure to build up inside the water tank in a manner similar to a pressure cooker. As pressure builds up more quickly in this method (since there is much less leakage of vapour) compared to the standard moka pot, it reaches the level required for water to rise through the ground coffee in a shorter time. The result is coffee brewed at a higher pressure and temperature than the standard pot, making it more similar to espresso and therefore with more visible crema.

Sorry, I wasn"t clear. I mean the pressure relief valve that is screwed into the side of the lower chamber. On all of my moka pots, this valve now leaks, so the pot never builds sufficient pressure to function.

I found a similar but slightly larger valve at MSC online, and was able to drill out and re-tap the hole in one of my aluminium moka pots to fit this valve with an o-ring. So that one is repaired. However, drilling out and retapping my stainless steel moka pots will be harder, and I am hoping to find the correct valve as used by Bialetti.

Edit: the valve I found is this one https://www.mscdirect.com/product/details/03244811 1/8" thread, 15-25 psi, $2.44. But it isn"t quite the correct thread to replace the original valve.

The safety valve is an important safety feature of your Bialetti pot.  If steam or pressure is being regularly released from the safety valve, do not ignore as your pot may be blocked, or have a faulty safety valve.

To check for a blockage, disassemble your pot by removing the ring and filter, and cleaning inside the column of the upper chamber. Then check the funnel to ensure it is not bent nor restricting the flow of water. Finally, located in the middle of the safety valve is a small piston, move the small piston in a circular motion to remove any clogging within the valve potentially caused by lime scale or other sediment.

Should after these actions the safety valve continues to activate, cease using your pot immediately and return to your authorised Bialetti stockistfor checking/servicing.

The size of your Bialetti stovetop depends on how much coffee you like to drink in any one sitting, how strong you like it and how many people join you. When Bialetti says "2 cup", that is to say your stovetop will produce "two espresso cups" of coffee. An espresso cup of coffee generally amounts to approximately 30mls.

You must not underfill the water in the base or put too little coffee in the filter to try and achieve a lesser quantity of coffee output because this will affect the pressure and effectiveness of your stovetop. Therefore, when you purchase your Bialetti make sure you are buying the correct size for your typical use. In many Italian household"s, there are a couple of sizes in the cupboard to accommodate everyday use, versus when guests are around.

Often in New Zealand, people like to drink their coffee with milk and often quite strong (like a classic Flat White). If you were to make a Flat White with a Bialetti stovetop, it would take approximately "2 cups" of coffee, and added milk from a Tuttocrema.