certified safety valve repair price

As your full-service partner, we offer setting and testing services to verify valve performance and validate conformance with stringent ASME and military specifications. This certification testing provides an extra layer of safety and ensures added confidence and peace of mind.

At our state-of-the-art test facilities in California and Virginia, we can conduct functional testing on all types and sizes of pressure relief valves. Please contact us to discuss your specific testing requirements. Our capabilities include but are not limited to:

Air service relief valves in accordance with ASME Section VIII, MIL-V-22549, MIL-V-20065C and ASTM F1508. Sizes 1/4″ – 8″, Pressures 3 PSIG – 6000 PSIG

Liquid service relief valves in accordance with ASME Section VIII, MIL-V-24332, MIL-V-20065C and ASTM F1508. Sizes 1/4″ – 8″, Pressures 3 PSIG – 1500 PSIG

Steam service relief valves in accordance with ASME Section I and Section VIII, ASTM F 1508 and MIL-V-20065, Revisions C & D. Sizes 1/4″ – 8″, Pressures 3 PSIG – 2000 PSIG

Dante Valve offers valve repair services for its commercial/industrial valves. The following repair guidelines have been implemented as of May 1, 2019:

Valves with a new purchase value of $600 or less are not economically feasible to repair. In this situation, customers will be offered a new valve, rather than a repair.

The valve to be repaired will be evaluated for warranty repair. If found to be a warranty repair, the valve will be repaired at no cost to the customer. If found not to be a warranty repair, the valve will be evaluated for repair or returned to the customer.

Repair evaluations will be billed at our standard hourly rate. If the customer chooses to have Dante Valve complete the repair work, the evaluation charge will be waived.

Shipment: All products and/or services covered by the quotation are sold F.O.B. either our plant in Linden, NJ or the manufacturer"s plant for the parts and/or valves required, unless otherwise indicated. The risk of loss or damage in transit will be upon the purchaser. The products will be prepared for shipment in a manner prescribed by us or the manufacturer and shipped by any public carrier which we deem satisfactory, unless the purchaser provides other specific shipping instructions when placing orders. Any date provided by us for completion of work or for shipment is intended as an estimate only and is not to be deemed a term of the quotation. Shipping charges shall be pre-paid and billed at the time of shipment.

Warranties and Limitations: We warrant only that our products will conform to their description herein and that at the time of sale our products will be free from defects on workmanship and material. The name and reputation of Certified Valve Repair stands prudently behind every valve or piece of equipment we recondition. We are valve repair specialists, if at any time, in any way, a valve or piece of equipment that we have repaired fails to provide complete satisfaction, please bring the matter to our attention. Every repaired valve, pump, instrument, or equipment when used in accordance with the manufacturer and our recommendations is guaranteed to be free from defective workmanship and material. We will repair or replace without charge, F.O.B. our plant any repaired unit which our own examination proves to be defective within a period stated by our firm at the time of delivery. We assume no responsibility for incidental damage or expense. Authorization is required before returned articles will be accepted.

Taxes: Any sales, use/excise taxes and applicable state and local taxes, required to be collected by Certified shall be added to quoted prices and billed at time of invoicing, unless the purchaser provides us with a tax exemption certificate acceptable to the relevant taxing authorities.

SVI Industrial offers both shop and field diagnostic and control valve repair services. By utilizing “Bench Mark” diagnostic equipment, we can input your control valve’s configuration information, run baseline tests, then provide detailed documentation that will show the valve’s performance. This information can be used to determine if your control valve needs minor instrumentation calibrations or possibly a major overhaul.

We can work independently or with your reliability engineers to establish a database of your safety relief devices throughout your plant. You can count on our experience and knowledge to establish a recommended frequency of safety valve testing and repairs of your safety valves, that meet your corporate requirements and requirements set by your state inspector and insurance auditor based on “best practices” from the National Board.

SVI Industrial holds three “VR” certificates from the National Board of Boiler and Pressure Inspectors authorizing our technicians to repair, set and certify safety pressure valves inline, on our customer’s site and at any of our shop locations for both ASME Section I and VIII code stamped safety valves. Our skilled valve technicians will evaluate the condition of your safety valve, make the proper recommendations and work diligently to get your safety valves tested, repaired and set to the correct specifications and back in-line as quickly as possible in order to minimize interruption of your daily operations.

We are a turnkey service provider with the capability to service, repair or replace your welded in-line steam safety valves, including pipe prep, welding, removal and heat treating. SVI Industrial is your one-stop source for all of your industrial safety valve repair and other maintenance needs.

Tired of keeping track of your valve inventory’s annual certification records? We offer complete management of your safety relief valves. With an inventory of repair parts and in stock relief valves of all sizes, we can respond to any customer emergency. We offer annual certification services as well as repair of all major brands, including Kunkle, Conbraco, Consolidated, Dresser, Apollo and more.

We also provide on-site electronic testing of your safety valves while your plant operates as an option. IVI is cognizant of the need to complete safety valve projects within a designated time frame. We pride ourselves on meeting critical deadlines during outages/shutdowns. We attribute this success to the planning of the projects and attention to detail by our project managers. In addition, IVI can provide technical support and maintenance coordination for all your valve repairs - during outages as well - and will have you back online with the least amount of downtime. This ensures that you will attain an extensive reduction in operating costs resulting in greater profits.

IVI is a VR certified safety valve repair facility, approved by the National Board of Boiler and Pressure Vessel Inspectors as a VR certificate holder (stamp 179). We certify pressure relief valves in the shop and in the field for sections V and UV. We also perform on-site testing (while the plant operates) providing documented reports for all valves tested. We are also certified to administer special process conversions regarding machining, welding, heat treating, and N.D.T. (non-destructive testing) with our VR certificate.

With our VR stamp, we repair all types of pressure relief valves such as Consolidated, Crosby, Kunkle, Farris, Spence, Anderson Greenwood, and numerous other O.E.M. safety and pressure relief valves.

Safety valves are used in a variety of industrial applications to include air/gas, vapor, steam, and liquid service, among many more. These pressure relief valves are critical to the safe operation of our customer’s equipment and provide—as their name implies—a safety measure that can reduce the number of risks that can threaten both your personnel and facilities.

Millennium Power Services’ safety valve technicians will get your valves tested, repaired, and quickly set to the exact specifications. We serve as your knowledge partner and will also evaluate the repair condition of every valve and make recommendations as needed to help you make the best decisions.

Extreme Force Valve has the authority to use the VR Stamp. Our accepted quality system meets the standards established by the National Board. Our VR Stamp signifies that our quality system complies with the boards requirements for proper repair of ASME code section I and VIII valves that have been NB capacity tested

The T/O mark signifies that our valves meet all the requirements for in service testing and certifications of pressure relief valves, providing they pass all testing required and no repairs are needed. Only minor set pressure adjustments are allowed. There is no need to disassemble a valve that operates properly.

Safety valves are used in a variety of applications, including air/gas, vapor, steam and liquid service.  Flotech has been approved by the National Board of Boiler and Pressure Vessel Inspectors to perform safety and relief valve testing, repair and certification.

Our valve experts will focus on getting your valves tested, repaired and quickly set to the exact specifications.  We evaluate the repair condition of every valve and will recommend the right solution to manage your maintenance program.

We have a 3,000 ft2 staffed facility with factory trained technicians and engineers to service and repair a wide variety of measurement, process control and gas detection equipment. Our technicians are able to perform service on site or in our workshops and are available to respond to most urgencies on a 24 hour, round the clock, basis.

Our technicians are trained and certified by Vega Americas Inc for the commissioning and diagnosis of all level measuring instruments for the provinces of Ontario, Quebec and the Maritimes. Whether for a radar, a level reading by pressure or commissioning of a nuclear product for level, density or weight on a conveyor our technicians will be able to support you.

Our technicians also have Yokogawa Corporation of America certification for the commissioning and diagnosis of all pressure, flow, temperature, controllers, data logging, lasers and many other measuring instruments. We are certified for the provinces of Ontario, Quebec and the Maritimes.

NBBI administers three accreditation programs for organizations that perform repairs and alterations on pressure equipment (R, VR, NR) and one program for organizations that test pressure relief valves (T/O).

Accreditation involves thorough evaluation of an organization’s quality system manual and requires a demonstration of its ability to implement the system. Authorized repair organizations are issued an NBBI stamp that is applied to the equipment nameplate. The stamp signifies strict repair and/or alteration requirements have been met and verified by an NBBI Commissioned Inspector.

Our rigorous training and real-world experience means you get experienced, knowledgeable factory-certified technicians who are dedicated to serving your needs 24 / 7 / 365.

The Mec-Tric Repair Shop is an ASME (American Society of Mechanical Engineers) and National Board certified repair shop. Our certifications include Section I (boiler code) and Section VIII (pressure vessel code). We are authorized in these sections for Air, Steam, Water, and Vapor.

Mec-Tric Control Company is authorized to assemble and repair safety valves by the National Board and A.S.M.E Code Section I and Section VIII for Air, Steam, Liquid, and Vapor.

Mec-Tric Control Company is the representative for the most well known regulator, the Spence regulator. Being a manufacturers representative gives Mec-Tric an advantage over other repair facilities. We repair regulators to like new condition and inventory many sizes and types.

We also repair and assemble Control Valves giving the same attention as our Safety Valve and Regulator programs. Mec-Tric calibrates the valve to receive pneumatic signals as well as electro-pneumatic signals.

We also provide in place testing at your facility or factory to minimize down time. Mec-Tric’s in place testing equipment allows for diagnosis of valves operating correctly and repair of valves not meeting specifications. This helps eliminate customer down time and limits the amount of valves customers must maintain in stock.

We also offer our “ANSI” shop, repairing and selling rebuilt pumps, ball valves, orbits and gate valves. Our on-site service utilizes four mobile units and one emergency unit.

We also recognize the importance of safety and training. The Mercer Valve Repair Division has an extensive training program to ensure that only qualified technicians are working on our customer’s valves.

Mercer Valve began its valve repair business in 1986, under the direction of Wesley L. Taylor. We became “VR” certified in 1986. In the fall of 1989, Glen Quillin became the Valve Repair Manager where he brought fifteen years of oil and gas industry experience to Mercer’s team. Since then, the Repair Division has grown from a two-man shop to 21 employees.

Allied Valve is the industry leader in valve sales, service, and distribution. Driven by three key principles – safety, reliability, and quality – Allied Valve is a leading supplier of pressure relief valves, control valves, rupture discs, conservation vents, flame arresters, blanket gas regulators, back pressure valves, actuation, and valve services in the upper Midwest. Helping your business meet tight production schedules and reduce downtime with 24/7/365 services delivered on-time, on-site, and in-person, Allied Valve is your trusted partner to keep your business running seamlessly.

Our factory-trained, OEM-certified technicians deliver time-tested solutions that reduce downtime and costs while maintaining the integrity of your safety program. With locations in IA, IL, IN, MN, ND, OH, and WI, our 100+ certified service technicians are at your service. We operate five Consolidated Green Tag Centers, two authorized Kunkle Assemblers plants, and five Masoneilan™ Authorized Repair Center (MARC™), dedicated to providing quality products.

Aeon PEC proudly offers a wide range of shop and field services for all your Control Valve, Safety Valve and Actuation needs. As a National Board Certified relief valve repair and assembly shop, Aeon PEC has been servicing our customer’s needs for over 18 years. Aeon PEC’s Certified Technicians are ready to assemble, repair and test your valves for almost any application to ensure your downtime costs are minimized. Aeon PEC’s mobile valve trailers and crane trucks serves a wide area which includes Arkansas, Louisiana, Texas, Oklahoma and New Mexico.

Have you struggled with finding your valve test or repair reports, have a nameplate missing, or the paperwork is just faded? Aeon PEC offers a web-based repository for all your valve testing and VR reports, accessible 24/7 via our website. Each client receives their secure log-in and password and they can access their account via our website. You’ll always know your records are safe and retrievable when they’re needed.

Large OEM repair part inventory for major relief valve manufacturers including: Leser, AGCO, Crosby, Taylor, Farris, Mercer, Hydroseal, Conbraco, Consolidated, etc