conbraco safety valve brands

2 Customer Service 1-704-841-6000 Table of Contents PRODUCTS Valve Selection Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 10 Series. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-6 10-322 / 10-512 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-8 10-600 Series ....

About Conbraco www.apollovalves.com 3 American-made, over 80 years strong American Lubricator and Brass Co. and Sterling & Skinner Manufacturing Co., two established Detroit-based manufacturers of brass valves and fittings, merged in 1928. They adopted a new name, Consolidated Brass Company, and Conbraco Industries was born. Now 80 years later, from its headquarters near Charlotte, N.C., Conbraco operates more than one million square feet of ISO 9001:2000 certified manufacturing and warehousing space at four Carolinas facilities. Reflecting its commitment to vertically integrated...

www.apollovalves.com 5 10-408 10-418 10 Series Brass/bronze safety relief valves protect ASME Section IV hot water heating boilers and hydronic heating systems. High capacity design features corrosion resistant construction. Brass, satin or polished chrome finishes available. ASME Section IV Inlet Size 3/4" - Outlet - 3/4” & 1" Set Pressure 20-150 psi Maximum temperature service: 250°F Applications: Ideal for use with hot water boilers and hydronic heating systems. Features • Pressures from 20 to 150 psig • Registered in all Canadian provinces and territories, CRN #0G8547.5C • Stainless...

www.apollovalves.com 7 Section VIII Pressure Vessels National Board capacity-certified safety valves; brass body with optional satin or polished chrome finish. Protects against excess pressure from thermal expansion and steam caused by failure of Btu input controls. ASME Section VIII Sizes 1/2" and 3/4" Set pressures 15 to 60 psig@312°F max National Board Certified Capacity Applications: Ideally suited for OEM applications such as steam carpet and jewelry cleaners, autoclaves, sterilizers, commercial pressure cookers, steam jacketed kettles, dental equipment, coffee makers and similar...

12 Customer Service 1-704-841-6000 12-200 Series Low Pressure Steam Heating Boiler Safety Valves Medium capacity safety valves protect ASME Section IV low pressure steam heating boilers. Cast bronze, full nozzle design features PTFE faced elastomer soft seating for dependable operation. ASME Section IV Sizes 2, 2-1/2" and 3" Set pressures 5-15 psi Applications: Medium and large commercial and industrial steam heating and processing boilers. Features • All bronze construction • PTFE-coated O-ring seat seal • 3/8" NPT side tapping for drain • Rust-proofed steel spring • Top guided, high...

www.apollovalves.com 13 ASME Section IV bronze safety valves protect small to medium low pressure steam heating boilers. Three design configurations feature top guiding and raised seating area for extended service life. Available top and side discharge models. ASME Section IV Sizes 3/4"-1-1/2" Set pressure 5 to 15 psi Applications: Low pressure steam heating and supply boilers. Features • Flat seat, PTFE faced disc for positive seal • Standard set pressure of 15 psig • Positive drainage of condensate from seat area • No. 13-101 is top outlet discharge • Registered in all Canadian provinces...

Set Pressure psig Suffix 5 -03 6 -04 8 -05 10 -06 12 -07 15 -08 14 Customer Service 1-704-841-6000 ASME Section IV Set pressures from 5 to 15 psig. Sizes 2", 2-1/2" and 3". Applications: The 14 Series is an ASME Section IV high capacity steam safety valve for use with medium and large size commercial and industrial heating boilers. Features • One piece body, all bronze construction • Rust proofed steel spring • Chrome plated seat, PTFE coated disc • PTFE coated EPDM O-ring for positive seal • 3/8" NPT side tapping for drain connection • Valves are capacity certified by the National Board at...

16 Customer Service 1-704-841-6000 Model Size Dimensions(in./mm.) Wt./Ea Number (in./mm.) A B C (lbs./kg.) 14-X05 2 x 2 3 6-1/2 3-1/8 8.4 50M x 50F 76 165 79 3.81 14-X06 2-1/2 x 2-1/2 3-1/2 7-5/8 3-1/2 12.5 65M x 65F 89 194 89 5.7 14-X07 3 x 3 4-1/8 8-3/4 3-7/8 17.0 80M x 80F 105 222 98 7.7 Dimensions and Weights High volume air relief valves designed for low pressure air and gas service. Rugged bronze construction features elastomer soft seating and TFE coated discs for dependable operation. Non-ASME code air and gas service Inlet sizes 2”, 2 1/2” and 3” Set pressures 4 to 22 psig @ 400°F...

www.apollovalves.com 17 Model Size Dimensions(in./mm.) Wt./Ea Number (in./mm.) A B C (lbs./kg.) 14-605 2 x 2 3 6-1/2 3-1/8 8.4 50M x 50F 76 165 79 3.81 14-606 2-1/2 x 2-1/2 3-1/2 7-5/8 3-1/2 11.8 65M x 65F 89 194 89 5.4 14-607 3 x 3 4-1/8 8-3/4 3-7/8 16.3 80M x 80F 105 222 98 7.4 Dimensions and Weights 14-600 14-600 Series Vacuum Relief Valves Model Numbering System 14-600 Series Vacuum Relief Valves EXAMPLES: 14-607-V14 3" Vacuum relief valve set at 14 Hg" Connect vacuum source here B A C 14 6 05 V12 Series Body / Cap Style Inlet Number and Service Connection Relief Pressure 14 6 = Vacuum...

The use of a drip pan elbow is highly recommended for steam service safety valves. When attached to a safety valve outlet, these elbows collect and remove condensate as well as isolate the valve from discharge piping stresses. Elbows through 4" feature female NPT threads and connect to the valve outlet by means of a close nipple. The 6" and 8" elbows have integral 125# ANSI B16.1 flanges and bolt directly to the valve outlet. Sizes: 3/4" through 8", flanged and threaded models. Material: Gray iron ASTM A126 class B. Finish: Black phosphate or black paint coating.

High volume air relief valves designed for low pressure air and gas service. Rugged bronze construction features elastomer soft seating and TFE coated discs for dependable operation. Non-ASME code air and gas service. Inlet sizes 2", 2 1/2" and 3". Set pressures 4 to 22 psig @ 400°F. max.

To achieve topmost performance and maximum service life, it is necessary to maintain a proper pressure margin between the set pressure of the safety relief valve and the operating pressure of the equipment. The minimum recommended operating pressure margin for this type of safety relief valve is 10 psi or 25% of the operating pressure, whichever is greater.

Versatile safety relief valve available in bronze, carbon steel or all stainless steel construction, suitable for a wide range of steam, air, gas, and liquid applications. High capacity full nozzle design is available with metal to metal, PCTFE or elastomer O-ring seating. Short tuned blowdown and backpressure tight body minimizes fugitive emissions and product losses in the event of valve operation.

ASME Section VIII design certified Safety Valve to protect portable steam vessel applications such as autoclaves, sterilizers and pressure cookers against excess pressure build-up. Made from proven ASTM grade Brass with optional decorative chrome finish.

Medium capacity safety valves protect ASME Section IV low pressure steam heating boilers. Cast bronze, full nozzle design features PTFE faced elastomer soft seating for dependable operation.

Applications: The 14 Series is an ASME Section IV high capacity steam safety valve for use with medium and large size commercial and industrial heating boilers.

High flow vacuum relief valves feature one piece cast bronze bodies, Teflon coated discs and elastomer soft seating provide accurate and dependable operation. Ideal for use with high volume vacuum systems, bulk hauling tanks and trailers, powdered solids/bulk handling and pneumatic conveying equipment.

The Apollo® Model VR Vacuum Relief valve is designed to automatically vent a system should a vacuum occur. It prevents siphoning of water from the system and/or tank collapse.

Safety Relief Valves, ASME HV Sec IV, 3/4" The Apollo® RVW62 is an ASME Section IV capacity certified bronze safety relief valve for protection of hot water heating boilers, swimming pool heaters and similar equipment.

Economical relief valves for general purpose non-code overpressure protection and bypass relief applications. Applications include liquid bypass or thermal expansion relief of well pumps, tanks, fire protection systems and all types of water or liquid piping systems. Not intended for steam service.

Adjustable relief valves protect equipment by providing low volume liquid relief or bypass control. Excess volume may be discharged back to the low pressure source. Ideal for agricultural sprayers and simple commercial or industrial pressurized systems.

Calibrated pressure relief valve allows for in-line pressure adjustments without the need for a pressure gauge. Provides static overpressure protection for liquid filled systems such as well pumps, tanks, fire protection systems.

ASME Section IV and CSA capacity certified bronze "uni-body" Safety Relief Valve for protection of hot water boilers, systems and similar equipment. This valve prevents excessive thermal expansion buildup in plumbing systems, tank applications or tankless water heaters.

Bronze automatic temperature and pressure relief valves used for protection of hot water heaters and storage tanks. Protects against elevated temperature and pressure.

The Apollo® TPC bronze automatic temperature and pressure relief valves are used for protection of high capacity commercial hot water heaters and storage tanks.

ASME Section IV Safety Relief Valve for protection of small hot water heating boilers and hydronic heating systems. Made from proven ASTM grade Brass and Bronze materials with decorative chrome finish.

ASME Section IV capacity certified bronze safety relief valve for protection of hot water heating boilers, systems and similar equipment. It can be Pre-set to any pressure ranging between 20 to 80 psig (1.4 to 5.5 bar) at 250�F (121�C) max

ASME Section IV capacity certified bronze safety relief valve for protection of hot water heating boilers, systems and similar equipment. It can be pre-set to any pressure ranging from 15 to 160 psig (1 to 11 bar) at 250�F (121�C) max.

ASME Section VIII design certified Safety Valve to protect portable steam vessel applications such as autoclaves, sterilizers and pressure cookers against excess pressure build-up. Made from proven ASTMgrade Brass with optional decorative chrome finish.

ASME Section I & VIII air and steam capacity certified safety valve for overpressure protection of steam power boilers, deaerators, accumulators, pressure reducing stations and pressure piping systems.

Medium capacity safety valves protect ASME Section IV low pressure steam heatingboilers. Cast bronze, full nozzle design features PTFE faced elastomer soft seatingfor dependable operation.

The Apollo� 13 Series bronze low pressure steam safety valve is designed to meet ASME Section IV code requirements for protection of steam heating boilers, systems and similar equipment.

The Apollo� 13 Series bronze low pressure steam safety valve is designed to meet ASME Section IV code requirements for protection of steam heating boilers, systems and similar equipment.

The Apollo� 14 Series is a 100% American Made Bronze Safety Relief Valve for protection of steam boilers, low pressure, high volume blowers, compressors and vacuum systems.

ASME Section I and VIII capacity certified safety valve for overpressure protection of steam power boilers, systems, pressure vessels, piping and similar equipment. Suitable for steam, air and non-hazardous gases.

ASME Section I/Section VIII capacity certified safety valve for overpressure protection of steam power boilers, steam and air systems, pressure vessels, piping and similar equipment. Compact and economic design ideal for OEM applications.

ASME Section VIII capacity certified safety relief valve for overpressure protection of steam, air/gas and liquid systems, pressure vessels, piping and similar equipment.

Drip Pan Elbows connect to the safety valveoutlet and direct steam discharge into the discharge piping, allowing condensate to drain away. Isolates the valve from piping stresses.Highly recommended in steam service.

ASME Section I & VIII air and steam capacity certified safety valve for overpressure protection of steam power boilers, deaerators, accumulators, pressure reducing stations and pressure piping systems.

High volume air relief valves designed for low pressure air and gas service. Ruggedbronze construction features elastomer soft seating and TFE coated discs fordependable operation.

ASME Section VIII capacity certified relief valve foroverpressure protection of compressors, intercoolers,dryers, receivers, control and instrument air lines andsimilar equipment.

ASME Section I and VIII capacity certified safety valve for overpressure protection of steam power boilers, systems, pressure vessels, piping and similar equipment. Suitable for steam, air and non-hazardous gases.

ASME Section I/Section VIII capacity certified safety valve for overpressure protection of steam power boilers, steam and air systems, pressure vessels, piping and similar equipment. Compact and economic design ideal for OEM applications.

ASME Section VIII capacity certified safety relief valve for overpressure protection of steam, air/gas and liquid systems, pressure vessels, piping and similar equipment.

High flow vacuum relief valves feature one piece cast bronze bodies, Teflon coated discs and elastomer soft seating provide accurate and dependable operation. Ideal for use with high volume vacuum systems, bulk hauling tanks and trailers, powdered solids/bulk handling and pneumatic conveying equipment.

The Apollo� Model VR Vacuum Relief valve is designed to automatically vent a system should avacuum occur. It prevents siphoning of water from the system and/or tank collapse.

We’ve got your back. Let us find the exact part you’re looking for in our 100,000 sq. ft. warehouse stocked with 35,000 ready-to-ship valves from the world’s most renowned brands. We’ll put our decades of experiencing cross-referencing valves to work fast. Just give us a call.

Apollo® Valves Safety Relief Valve, Series: 19 Series, 1-1/4 x 1-1/2 in Nominal, MNPT x FNPT Connection, 130 psig, 3724 lb/hr Flow Rate, Steam Media, Lift Lever Actuator, Brass Trim, PTFE Softgoods, Bronze Body, -60 to 406 deg F, 11 in Height, Domestic/Import: Domestic

ASME Section IV capacity certified bronze safety relief valve for protection of hot water heating boilers, systems and similar equipment. It can be pre-set to any pressure ranging from 15 to 160 psig (1 to 11 bar) at 250°F (121°C) max.

ASME Section IV capacity certified bronze safety relief valve for protection of hot water heating boilers, systems and similar equipment. It can be Pre-set to any pressure ranging between 20 to 80 psig (1.4 to 5.5 bar) at 250°F (121°C) max.