consolidated 1811 safety valve quotation

A variety of pressure/temperature classes, orifice sizes and inlet/outlet combinations provide a flexible selection of safety valves to meet industrial needs at the lowest cost.

Low spindle bearing point and concentric spindle loading virtually eliminate the natural tendency for the disc to assume a horizontal position during the opening and closing cycle of the valve.

The mechanical flexibility of the Thermodisc allows the system pressure to assist in sealing the contact surface between the valve seat and Thermodisc.

Dual ring adjustments allow fine tuning of the safety valve performance characteristics needed to meet the steam system conditions that vary at each installation. A sharp, clean opening assures long valve seat life and reduced maintenance costs. Consistent opening and closing pressures contribute to efficient steam system operation.

Relief valves are often the last point of protection against dangerous events, so they must be dependable and ready to operate under high pressure situations. With Consolidated’s 140+ years of dedicated Pressure Relief Valve (PRV) engineering and manufacturing expertise under their belt, they know pressure relief valves and offer a wide range of safety relief valve and safety valve styles, sizes, options and configurations for all kinds of applications, environments and media.

Consolidated works closely with customers and regulatory organizations to configure, engineer and manufacture safety valves that can help maintain safer operating conditions in a full range of environments, to name a few:

Features: Consolidated Maxiflow® high pressure safety valves are premium products used on a majority of power generating stations worldwide to protect boilers from overpressure conditions.

Maxiflow valves are high capacity, Thermodisc® seat, spring loaded safety valves designed for sub critical steam service of 3000 psig at 1200 degrees F, and also for supercritical steam service of 4500 psig at 1050 degrees F. All valves in this series are produced to exceed AME requirements to minimize steam losses.

Features: Consolidated Electromatic relief valves provide manual or automatic overpressure control by the plant operator. These electrically actuated safety devices are utilized on superheated and saturated steam applications at sub critical and supercritical pressures to 4500 psig.

Use of Electromatic relief valves provides the plant operator with a control system that can instantaneously open or close a pressure relief valve on a distantly located header or drum. This advantage results in the capability of accurately balancing boiler operations at peak load conditions, while extending operating life of super heater safety valves.

Features: Consolidated type 2700 safety valves are high capacity, spring loaded valves designed specifically for the co-generation, independent power production and industrial boiler markets. Consolidated’s well known Thermodisc Seat design provides leak tight operation at 94% of the valve’s set pressure. The valves are available in ANSI 900 and 2500 classes at temperatures up to 1050 degrees F. The 2700 is approved for ASME Code Section I and VIII applications.

Features: Consolidated 3900 series pilot operated valves are utilized for the process and general industrial market with inlet sizes ranging from 1″ to 8″. Pressure range is from 15 psig through 3750 psig.

Consolidated pilot operated valves are available in pop type non-flowing, and modulating type flowing and non-flowing designs to meet the most rigorous requirements of the process and gas transmission industries. This product line complies with ASME Code Section VIII.

Features: Consolidated 1900 series steel flanged safety relief valves are designed for gas, vapor, steam and liquid service. Pressure classes range from ANSI 150 to 2500, with temperature ratings up to 1000 degrees Fahrenheit.

Valves are available as standard with bellows for back pressure compensation as well as various soft seating materials for maximum seat tightness. Designs for H2S service are also standard. All 1900 series valves are provided with stainless steel internal parts, and are built to meet ASME Code Section VIII requirements.

Features: Consolidated safety relief valves are designed for general service applications. Sometimes referred to as “portable,” this valve series also may be supplied with flanged or other connections. Valves are closed bonnet, spring loaded with connections from 1/2′ to 2′.

The 1990/1982 series is available up to 800 degrees F with a pressure limit of 8500 psig. Specific models are supplied for H2S as well as all stainless steel construction. Valves comply with ASME Code Section VIII.

You can review the price and details of the Dresser Consolidated Model: 1811MB-0-3X1-22 SAFETY VALVE product with Dresser Consolidated, product code Model: 1811MB-0-3X1-22 below. To get a quotation, fill in the online quotation form.

Safety Relief Valves............................................................................................................................................................................................4

Type 1900-UM Safety Relief Valve.........................................................................................................................................................5

Type 1900 Safety Relief Valve..................................................................................................................................................................6

Type 19000 Safety Relief Valve................................................................................................................................................................7

Type 1982 Safety Relief Valve..................................................................................................................................................................7

Type 2900 Pilot Operated Safety Relief Valve...................................................................................................................................8

Type 3900 Pilot Operated Safety Relief Valve...................................................................................................................................8

Type 4900 Pilot Operated Safety Relief Valve...................................................................................................................................9

Safety Valves.......................................................................................................................................................................................................10

Safety Valve........................................................................................................................................................11

Type 2700 Safety Valve.............................................................................................................................................................................11

Type 1811 Safety Valve.............................................................................................................................................................................12

Type 1511 Safety Valve.............................................................................................................................................................................12

Type 1541-3, 1543-3 Safety Valve........................................................................................................................................................13

Type 2478 Safety Valve.............................................................................................................................................................................13

Type 1900/P Pilot Operated Safety Relief Valve............................................................................................................................14

Type 2900-40 Pilot Operated Safety Relief Valve..........................................................................................................................14

Ball Valve......................................................................................................................................................15

Over the years we have refined our products so that our customers only have top quality options. Our service offerings are custom-fit to our customer’s individual needs. Our technicians and engineers are some of the most experienced and educated industrial experts available. We never compromise on safety and your satisfaction is our only goal.