crane safety valve made in china

2023-05-21 21:22:12

In addition, there is a range of WRAS approved Public Health Valves for hot and cold water systems that includes thermal circulation valves that assist in preventing Legionnaires" Disease, as well as a range of pressure reducing valves.

The Crane Fluid Systems ProBalance range offers a wide variety of Flow Management Systems and Static Balancing Valves, providing the ultimate in accuracy and reliability.

crane safety valve made in china

Other Valves & Manifolds└ Valves & Manifolds└ Hydraulics, Pneumatics, Pumps & Plumbing└ Business & IndustrialAll CategoriesAntiquesArtBabyBooks & MagazinesBusiness & IndustrialCameras & PhotoCell Phones & AccessoriesClothing, Shoes & AccessoriesCoins & Paper MoneyCollectiblesComputers/Tablets & NetworkingConsumer ElectronicsCraftsDolls & BearsMovies & TVEntertainment MemorabiliaGift Cards & CouponsHealth & BeautyHome & GardenJewelry & WatchesMusicMusical Instruments & GearPet SuppliesPottery & GlassReal EstateSpecialty ServicesSporting GoodsSports Mem, Cards & Fan ShopStampsTickets & ExperiencesToys & HobbiesTravelVideo Games & ConsolesEverything Else

crane safety valve made in china

Globe valves are ideal for throttling service. Their flow characteristics permit accurate and repeatable flow control. However, caution must be exercised to avoid extremely close throttling when pressure drop exceeds 20%. Globe Valves are split into two parts separated by a vertically positioned bore. The valve opens by unscrewing a plug that sits in the opening.

crane safety valve made in china

5800 Suzhou (Manufacturing) Crane Fluid & Gas (Suzhou) Ltd. 1 Runsheng Road Shengpu Sip Jiangsu Province 215126 Suzhou China Tel: +86 5126 28615 0088 Ningjin (Manufacturing) 8 Youji Street Ningjin 00863195856825 China Hebei Tel: +86 319 5802730 INTERNATIONAL Headquarters Manufacturing Distribution Centre Sales Office INTRODUCTION 3TECHNICAL HELPLINE: +44 (0)1473 277400 E: enquiries@cranefs.com W: www.cranefs.com

Crane Building Services & Utilities forms part of the Process Flow Technologies Group within Crane Co., which was founded in 1855, and is now a multi-industry manufacturer that generated net sales of $2.9bn in 2020.

In 1906, James E. Bennett set up a business in London as a coppersmith. He soon recognised a growing interest in the trade for the latest American pipe fittings and valves, and turned his attention to importing. Amongst the products he introduced to the British industry were those of Crane Co., a thriving American Company founded in the mid-19th century.

Crane soon realised that a manufacturing unit in the UK would help expand their international business. In 1919, Crane Co. purchased the assets of the English Company and changed its name to Crane-Bennett Limited with the intention of manufacturing valves and fittings in the UK.

Today, the Company forms part of Crane Building Services & Utilities, which was created as a result of Crane Ltd acquiring Viking Johnson, Helden and WASK in 2003 and Hattersley in 2004. The most recent acquisition was Delta Fluid Products in 2008. Each of these companies has a long and distinguished history: • Crane Limited founded in Ipswich in 1919

The name Crane speaks of who we are, what we stand for and how our customers perceive us: a company with history and tradition, but also a company that is innovative, quality-minded and one which acts with integrity, still holding to the resolution of its founder.

Crane Co. was founded on the 5th July 1855 by Richard Teller Crane who made the following resolution: “I am resolved to conduct my business in the strictest honesty and fairness; to avoid all deception and trickery; to deal fairly with both customers and competitors; to be liberal and just towards employees; and to put my whole mind upon the business.”

INTRODUCTION Every effort has been made to ensure that the information contained in this publication is accurate at the time of publishing. Crane Ltd assumes no responsibility or liability for typographical errors or omissions or for any misinterpretation of the information within the publication and reserves the right to change without notice.

In 1906 James E. Bennett set up a business in London as a Coppersmith. He soon recognised a growing interest in the trade for the latest American pipe fittings and valves, and turned his attention to importing. Amongst the products he introduced to the British industry were those of Crane Co., a thriving American Company founded in the mid-19th century.

Now, for more than 100 years, Crane Fluid Systems has manufactured a range of valves and pipe fittings for the Building Services industry, and is developing a range of next generation balancing solutions. The product portfolio comprises a full range of traditional valves: ball, butterfly, check, gate, globe and radiator valves as well as strainers and drain cocks.

In addition, there is a range of WRAS approved Public Health Valves for hot and cold water systems that includes thermal circulation valves that assist in preventing Legionnaires’ Disease, as well as a range of pressure reducing valves.

The Crane Fluid Systems ProBalance range offers a wide variety of Flow Management Systems and Static Balancing Valves, providing the ultimate in accuracy and reliability.

LOCATION: Hong Kong CLIENT: Walt Disney Company CONTRACTOR: Tozen HK Ltd SPECIFICATION: General valves LEISURE CASE STUDY : BUILDING SERVICES Valid as of 100521

7TECHNICAL HELPLINE: +44 (0)1473 277400 E: enquiries@cranefs.com W: www.cranefs.com CRANE FLUID SYSTEMS PRODUCT RANGE GENERAL VALVESINTRODUCTION Our Heritage 4 About us 5 Building Services Brands 159 Crane BS&U International Locations 2 Radiator Valves Air Vents / De-Aerators Ball Valves Globe Valves 12 14 Gate Valves 73 102 120 Check Valves 47 Draw-Off Cocks / Drain Taps 69 Strainers 134 Butterfly Valves Export Butterfly Valves 23 37 Valid as of 300921 Typical Kv Values 154 GENERAL INFORMATION Quality Assurance 155 Case Study Index 157 Figure Number Index 158 Flange Tables 144

BALL VALVES 8 TECHNICAL HELPLINE: +44 (0)1473 277400 E: enquiries@cranefs.com W: www.cranefs.com INTRODUCTION Every effort has been made to ensure that the information contained in this publication is accurate at the time of publishing. Crane Ltd assumes no responsibility or liability for typographical errors or omissions or for any misinterpretation of the information within the publication and reserves the right to change without notice. QUICK SELECTION GUIDE For full product specifications please refer to the CFS website: www.cranefs.com

9TECHNICAL HELPLINE: +44 (0)1473 277400 E: enquiries@cranefs.com W: www.cranefs.com INTRODUCTION QUICK SELECTION GUIDE Every effort has been made to ensure that the information contained in this publication is accurate at the time of publishing. Crane Ltd assumes no responsibility or liability for typographical errors or omissions or for any misinterpretation of the information within the publication and reserves the right to change without notice.

For full product specifications please refer to the CFS website: www.cranefs.com Iron & Steel Application Valve Type End Connection Body Material PN10 PN16 PN20 PN25 Class 125 Class 150 Class 300 Air / Gas 5Bar Isolation Gate Flanged Cast Iron FM57, FM124, FM125 FM63, FM82, FM124, FM125 F53, F58, F84 Cast Steel 47XU-F 33XU-F Isolation & Regulation Globe Flanged Cast Iron FM369 FM369 F372 Cast Steel 143XU 151XU Butterfly Flanged Ductile Iron F611, F612, F614, F615, F626, F627, F628, F629, F631, F632, F621, F622, F624, F625, FM700, FM701 DM638, DM639, FM638, FM639 F611, F612, F626, F627, F621, F622 FA725, FA700, FA701 Regulate pressure PRV Flanged Ductile Iron DM1716 DM1716 DM1725 DM1725 Prevent backflow Check Flanged Cast Iron DM1716 DM1725 DM1725 Cast Steel FM469, FM492 F493 147XU 159XU Ductile Iron FM463 FM463 FM466 FM466 FA463 Remove debris Strainers Flanged Ductile Iron FM276 FM278 F277 Valid as of 140921

Crane Fluid Systems’ Dominators – Probalance balancing valves have been installed in the 60,335 capacity home of Arsenal Football Club, the Emirates Stadium.

The Dominator, which is part of Crane FS ProBalance range, is a compact, prefabricated unit that combines a control valve, flow measurement device, bypass valve, strainer and drain, ready for simple and fast on-site connection to fan coils and other terminal units.

BALL VALVES 12 TECHNICAL HELPLINE: +44 (0)1473 277400 E: enquiries@cranefs.com W: www.cranefs.com GENERAL VALVES Offering an efficient performance, the Crane Fluid System Air Vents remove inevitable and potentially dangerous air trapped in the system. Designed to simplify the venting process, for single or multi-boiler and calorifier installations, the range offers savings in time and costs.

AIR VENTS/DE-AERATORS Fig. No. PN Rating End Connections Size Range Cap Type Shutoff Valve D2003† 10 Threaded 3/8 - 1/2" Standard No D2003† 10 Threaded 3/4 - 1" Hygroscopic No D2004† 10 Threaded 1/2" Standard Yes † WRAS approved product D2003 Vaild as of 100521

FIG NUMBER SIZE/ THREAD (inch) D (mm) H/H1 (mm) A (mm) WEIGHT (kg) D2003 3/8 46 70.50 10.50 0.146 1/2 46 70.50 10.50 0.157 3/4 46 70.50 10.50 0.154 1 46 73.50 13.50 0.190 D2004 1/2 46 88 10.50 0.190 Shut-Off Valve base NOTE D2004 version with Shut-Off Valve base allows the Automatic Air Vent to be removed without draining the system D2003 D2004 WITH SHUT-OFF VALVE 1/2" FIG. D2003 D2004 DN 3/8" 1/2" 3/4" 1" A A D2004 with Shut-Off Valve 1/2" D2003 3/8" - 1/2" D2003 D2004 WITH SHUT-OFF A A D2003 D2004 WITH SHUT-OFF VALVE FIG. D2003 D2004 A A A DN DN D D2003 D2004 WITH SHUT-OFF VALVE FIG. D2003 D2004 A A D H H1 A

The Crane Fluid System Series of ball valves consists of compact, lightweight units which are easy to install and operate. Their robust construction ensures a long, trouble-free service life. They offer full flow with minimum turbulence in the open position and bubble tight closure in the closed position. Only a quarter-turn is required to fully open or close the valve.

BALL VALVES Valid as of 020222 APPLICATION Model Size Range Pressure Rating End Connections Operation Body material WRAS approval CHW Potable Water LTHW MTHW HTHW Air Gas

Multiple operating handle options (Clockwise from top right), quarter turn lever, extended stem lever, T-Handle & lockshield. Rubberised handle for grip and to provide a level of thermal isolation to the user. Featuring the Crane brand as a reassurance of quality.

15TECHNICAL HELPLINE: +44 (0)1473 277400 E: enquiries@cranefs.com W: www.cranefs.com GENERAL VALVES BALL VALVES Available in different taper thread optionsBS EN 10226-2 or ANSI B1.20.1 Loctite 648 is used on the main joint threads to

• D171 Ball Valves are light, compact units which are easy to install and operate, yet their robust construction ensures long, trouble free service life.

• Extension stem (EXS) to enable valve operation whilst the valve and associated pipework is surrounded with insulation or if the valve is in a hard to access area.

GENERAL VALVES Every effort has been made to ensure that the information contained in this publication is accurate at the time of publishing. Crane Ltd assumes no responsibility or liability for typographical errors or omissions or for any misinterpretation of the information within the publication and reserves the right to change without notice.

add suffix AT to denote American Thread) OPERATOR: Lever SPECIFICATION: Quarter Turn, Tight Shut-Off. This Valve Is Not Suitable For Use On Group 1 Gases Or Unstable Fluids, as defined by the Pressure Equipment Directive 2014/68/EU.*

Crane D171 Ball Valves are light, compact units which are easy to install and operate, yet their robust construction ensures long, trouble free service life. In addition the D171T and D171LS are WRAS approved for use on hot and cold water systems up to 85°C.

PRESSURE RATING: PN25 TEMPERATURE OPERATING RANGE: -10 to 186°C UK END CONNECTION: Taper threaded to BS EN 10226-2 (ISO 7-1) formerly BS 21 US END CONNECTION: ANSI B1.20.1 (please add suffix AT to denote American Thread) OPERATOR: T-Handle / Allen Key SPECIFICATION: Quarter Turn, Tight Shut-off. This valve is not suitable for use on Group 1 gases or unstable fluids, as defined by the Pressure Equipment Directive 2014/68/EU.*

D171LS Lockshield Bronze Ball Valve D171T T-Handle Bronze Ball Valve * See page 159 for more information Vaild as of 011021 SIZE (inch) WEIGHT (kg) L (mm) B (mm) H (T) (mm) H (LS) (mm) L1 (T) (mm) L1 (LS) (mm) KV 3/8 0.13 46 10.0 31 38 11 1/2 0.20 57 14.0 42 50 55 35 20 3/4 0.41 67 18.1 43 51 55 35 47 1 0.64 77 24.1 53 58 83 39 77 1-1/4 1.07 91 31.0 58 63 83 39 141 1-1/2 1.57 103 39.0 73 76 108 46 198 2 2.83 122 50.0 80 84 108 46 338

• Extension stem (EXS) to enable valve operation whilst the valve and associated pipework is surrounded with insulation or if the valve is in a hard to access area.

D171ATH D171ALS PRESSURE RATING: PN25 TEMPERATURE OPERATING RANGE: -10 to 120°C UK END CONNECTION: Taper threaded to BS EN 10226-2 (ISO 7-1) formerly BS 21 US END CONNECTION: ANSI B1.20.1:1983 (please add suffix AT to denote American Thread) OPERATOR: T-Handle / Spanner or Socket SPECIFICATION: Quarter Turn Materials Dimensions & Weights Pressure/Temperature Ratings Threaded Intermediate pressure ratings shall be determined by interpolation. TEMPERATURE (°C) -10 to 100 120 PRESSURE (BAR) 25 21.8 PN25 D171ALS Threaded DZR Ball Valve with Lockshield D171ATH Threaded DZR Ball Valve with T-Handle Vaild as of 011021 SIZE (inch) WEIGHT (ATH) (kg) WEIGHT (ALS) (kg) L (mm) B (mm) H (ATH) (mm) H (ALS) (mm) L1 (ATH) (mm) L1 (ALS) (mm) KV 1/2 0.181 0.208 58.9 15.0 39.8 41.8 50 29.6 31 3/4 0.278 0.304 66.9 20.0 43.3 45.3 50 29.6 45 1 0.481 0.517 80.4 25.0 54.2 57.7 55 36.4 63 1-1/4 0.753 0.803 94.0 32.0 62 67.5 82 43.4 102 1-1/2 1.057 1.107 102.0 39.5 67.8 73.3 82 43.4 375 2 1.788 1.851 124.0 50.0 80.5 86.5 110 48 420

BALL VALVES 20 TECHNICAL HELPLINE: +44 (0)1473 277400 E: enquiries@cranefs.com W: www.cranefs.com GENERAL VALVES Every effort has been made to ensure that the information contained in this publication is accurate at the time of publishing. Crane Ltd assumes no responsibility or liability for typographical errors or omissions or for any misinterpretation of the information within the publication and reserves the right to change without notice. BALL VALVES

Crane Fluid Systems valves have been used throughout the HVAC systems, and importantly in the Ski Eqypt ski dome – keeping the air conditioning fully functional.

CONTRACTOR: ORASCOM DISTRIBUTOR: Omega SPECIFICATION: Butterfly valves, ball valves, gate valves, globe valves, DRVs, strainers CASE STUDY : BUILDING SERVICES Valid as of 100521

Crane Fluid System butterfly valves are compact quarter turn valves. The body is elastomer lined providing a resilient bubble tight shut off. The valves are supplied in wafer or lugged variants and may be lever or gearbox operated. Linings are EPDM or Nitrile rubber depending on the intended service conditions. Primarily recommended for on off service, they may also be used for non-critical throttling applications. Only a quarter turn is needed to fully open or close the valve.

CFS also offer a range of high performance butterfly valves, developed for high integrity shut-off and regulation duties. This range is ideal where increased pressure and elevated temperature specifications are outside the normal operating parameters of concentric disc valves. The CFS high performance valves have enhanced features to provide impeccable performance and reliability.

F614 Figure Number Size Range Ductile Iron Semi Lugged Fully Lugged Aluminium Bronze Stainless Steel Stainless Steel WRAS Approved EPDM EPDM Nitrile Lever Gearbox PN10 PN16 PN25 ANSI Class 125 ANSI Class 150 CHW Potable Water LTHW MTHW Gas BODY BODY STYLE DISC SHAFT LINER OPERATOR RATING APPLICATION † WRAS approved BUTTERFLY VALVES

B16.1 Class 125. Valves may be used for flow regulation. Valve design conforms to BS EN 593. Face to face conforms to BS EN 558. MEDIUM: Suitable for Group 2 liquids as defined by the Pressure Equipment Directive 2014/68/EU* WRAS approved valves.

Dimensions & Weights PN16 Vaild as of 081220 Pressure/Temperature Ratings MAX TEMPERATURE (°C) -10 to 100 PRESSURE (BAR) 16 F621 Intermediate pressure ratings shall be determined by interpolation. WRAS approved -10 to 80˚C 50 2.4 109 246 72 43 32 212.5 100 52.9 98 DN50 PN16 / 2” CL125 65 3.3 131.5 278.5 82 46 32 212.5 120 64.6 167 DN65 PN16 / 2.1/2” CL125 80 3.6 134 294 95 46 32 212.5 127 79 258 DN80 PN16 / 3” CL125 100 4.5 163 343 115 52 32 212.5 156 104.4 512 DN100 PN16 / 4” CL125 125 6.3 169 359 125 56 32 212.5 190 123.5 872 DN125 PN16 / 5” CL125 150 8.4 179 392 142 56 40 245 212 155.8 1,347 DN150 PN16 / 6” CL125 200 13.4 224 465 170 60 40 378 268 202.7 2,675 DN200 PN16 / 8” CL125 SIZE (mm) WEIGHT (kg) A (mm) A1 (mm) B (mm) C (mm) D (mm) E (mm) F (mm) G (mm) Kv FLANGE SLOTS TO SUIT *Kv coefficient denotes valves in fully open position Materials PART MATERIAL Body Ductile Iron ASTM A536 64-45-12 (Epoxy Paint) Disc Aluminium Bronze C954 ASTM B148 Liner EPDM (WRAS Approved) Temp. -10 to 100°C (80°C WRAS) Shaft Stainless Steel Type 410 Taper Pin Stainless Steel Type 410 O-Ring Buna-N Bushing PTFE Lever Aluminium Alloy (Epoxy Paint)

BALL VALVES 25 TECHNICAL HELPLINE: +44 (0)1473 277400 E: enquiries@cranefs.com W: www.cranefs.com GENERAL VALVES Every effort has been made to ensure that the information contained in this publication is accurate at the time of publishing. Crane Ltd assumes no responsibility or liability for typographical errors or omissions or for any misinterpretation of the information within the publication and reserves the right to change without notice. BUTTERFLY VALVES

F622 F622 PRESSURE RATING: PN16 / ANSI CLASS 125 TEST PRESSURES: Shell: 24 Bar Seat: 17.6 Bar SPECIFICATION: Gearbox operated epoxy coated Ductile Iron Body. Semi-lugged. Aluminium Bronze disc. EPDM liner. To suit flange connections BS EN 1092-2 PN10 or PN16 and ANSI B16.1 Class 125. Valves may be used for flow regulation. Valve design conforms to BS EN 593. Face to face conforms to BS EN 558. MEDIUM: Suitable for Group 2 liquids as defined by the Pressure Equipment Directive 2014/68/EU* WRAS approved valves.

Dimensions & Weights PN16 Vaild as of 100521 50 7.1 109 72 43 32 157 150 52.9 45 54 39 98 DN50 PN16 / 2” CL125 65 7.9 131.5 82 46 32 157 150 64.6 45 54 39 167 DN65 PN16 / 2.1/2” CL125 80 8.2 134 95 46 32 157 150 79 45 54 39 258 DN80 PN16 / 3” CL125 100 9.1 163 115 52 32 157 150 104.4 45 54 39 512 DN100 PN16 / 4” CL125 125 10.9 169 125 56 32 157 150 123.5 45 54 39 872 DN125 PN16 / 5” CL125 150 12.7 179 142 56 40 157 150 155.8 45 54 39 1,347 DN150 PN16 / 6” CL125 200 19.6 224 170 60 40 238 150 202.7 45 54 39 2,675 DN200 PN16 / 8” CL125 250 38.8 264 215 68 40 238 300 250.7 63 81 41.5 4,555 DN250 PN16 / 8” CL125 300 54.0 299 240 78 40 223.5 300 301.9 78 81 38.3 7,037 DN300 PN16 / 12” CL125 SIZE (mm) WEIGHT (kg) A (mm) B (mm) C (mm) D (mm) E (mm) F (mm) G (mm) H (mm) h (mm) M (mm) Kv FLANGE SLOTS TO SUIT DN50 PICTURED *Kv coefficient denotes valves in fully open position Datasheet_Views_F612_F622_F627_F626B 24.01.19.PDF 1 29/07/2019 15:38 Datasheet_Views_F612_F622_F627_F626B 24.01.19.PDF 1 29/07/2019 15:38 Datasheet_Views_F612_F622_F627_F626B 24.01.19.PDF 1 29/07/2019 15:38 Pressure/Temperature Ratings Intermediate pressure ratings shall be determined by interpolation. WRAS approved -10 to 80˚C MAX TEMPERATURE (°C) -10 to 100 PRESSURE (BAR) 16 F622 Materials PART MATERIAL Body Ductile Iron ASTM A536 64-45-12 (Epoxy Paint) Disc Aluminium Bronze C954 ASTM B148 Liner EPDM (WRAS approved) Temp. -10 to 100°C (80°C WRAS) Shaft Stainless Steel Type 410 Taper Pin Stainless Steel Type 410 O-Ring Buna-N Bushing PTFE Gearbox Cast Iron

• WRAS approved for potable water applications -10 to 80°C • Robust, ductile iron valve body for long life service • Valve body fully-lugged to fit PN16 or ANSI Class 125 flanges • The anti-blow out stem design provides a safe and secure operation • Integrated notch plate for a more compact design and aluminium lever to reduce risk of corrosion • Fully bonded epoxy paint system for superior corrosion resistance • Suitable for applications where Level 3 C3 (Medium) corrosion protection is required • Maintenance free valve design, reducing downtime • Suitable for a wide temperature range -10°C to100°C F624 F624 PRESSURE RATING: PN16 TEST PRESSURES: Shell: 24 Bar Seat: 17.6 Bar SPECIFICATION: Lever operated epoxy coated Ductile Iron Body. Fully-lugged. Aluminium Bronze disc. EPDM liner. To suit flange connections BS EN 1092-2 PN16. Valves may be used for flow regulation. Valve design conforms to BS EN 593. Face to face conforms to BS EN 558. MEDIUM: Suitable for Group 2 liquids as defined by the Pressure Equipment Directive 2014/68/EU* WRAS approved valves.

BALL VALVES 27 TECHNICAL HELPLINE: +44 (0)1473 277400 E: enquiries@cranefs.com W: www.cranefs.com GENERAL VALVES Every effort has been made to ensure that the information contained in this publication is accurate at the time of publishing. Crane Ltd assumes no responsibility or liability for typographical errors or omissions or for any misinterpretation of the information within the publication and reserves the right to change without notice. 50 8.3 109 72 43 32 157 150 52.9 45 54 39 98 4- M16x2.0 65 8.7 131.5 82 46 32 157 150 64.6 45 54 39 167 4- M16x2.0 80 9.7 134 90 46 32 157 150 79 45 54 39 258 8- M16x2.0 100 11.2 163 108 52 32 157 150 104.4 45 54 39 512 8- M16x2.0 125 13.9 169 125 56 32 157 150 123.5 45 54 39 872 8- M16x2.0 150 15.8 179 142 56 40 157 150 155.8 45 54 39 1,347 8- M20x2.5 200 23.0 224 165 60 40 238 150 202.7 45 54 39 2,675 12- M20x2.5 250 44.9 264 215 68 40 238 300 250.7 63 81 41.5 4,555 12- M24x3.0 300 64.2 299 240 78 40 223.5 300 301.9 78 81 38.3 7,037 12- M24x3.0 SIZE (mm) WEIGHT (kg) A (mm) B (mm) C (mm) D (mm) E (mm) F (mm) G (mm) H (mm) h (mm) M

Iron Body. Semilugged. Aluminium Bronze disc. EPDM liner. To suit flange connections BS EN 1092-2 PN16. Valves may be used for flow regulation. Valve design conforms to BS EN 593. Face to face conforms to BS EN 558. MEDIUM: Suitable for Group 2 liquids as defined by the Pressure Equipment Directive 2014/68/EU* WRAS approved valves.

F611 / F626 F611 DN50 PICTURED PRESSURE RATING: PN16 / CLASS 125 TEST PRESSURES: Shell: 24 Bar Seat: 17.6 Bar SPECIFICATION: Lever operated epoxy coated Ductile Iron Body. Semi-lugged. Aluminium Bronze disc. EPDM or Nitrile liner. To suit flange connections BS EN 1092-2 PN10 or PN16 and ANSI B16.1 Class 125. Valves may be used for flow regulation. Valve design conforms to BS EN 593. Face to face conforms to BS EN 558. MEDIUM: F611 - Suitable for Group 1 and 2 gases and Group 1 and 2 liquids as defined by the Pressure Equipment Directive 2014/68/EU.* F626 - Suitable for Group 2 liquids as defined by the Pressure Equipment Directive 2014/68/EU.*

Dimensions & Weights PN16 Vaild as of 081220 50 2.4 109 246 72 43 32 212.5 100 52.9 98 DN50 PN16 / 2” CL125 65 3.3 131.5 278.5 82 46 32 212.5 120 64.6 167 DN65 PN16 / 2.1/2” CL125 80 3.6 134 294 95 46 32 212.5 127 79 258 DN80 PN16 / 3” CL125 100 4.5 163 343 115 52 32 212.5 156 104.4 512 DN100 PN16 / 4” CL125 125 6.3 169 359 125 56 32 212.5 190 123.5 872 DN125 PN16 / 5” CL125 150 8.4 179 392 142 56 40 245 212 155.8 1,347 DN150 PN16 / 6” CL125 200 13.4 224 465 170 60 40 378 268 202.7 2,675 DN200 PN16 / 8” CL125 SIZE (mm) WEIGHT (kg) A (mm) A1 (mm) B (mm) C (mm) D (mm) E (mm) F (mm) G (mm) Kv FLANGE SLOTS TO SUIT *Kv coefficient denotes valves in fully open position Materials PART

BALL VALVES 29 TECHNICAL HELPLINE: +44 (0)1473 277400 E: enquiries@cranefs.com W: www.cranefs.com GENERAL VALVES Every effort has been made to ensure that the information contained in this publication is accurate at the time of publishing. Crane Ltd assumes no responsibility or liability for typographical errors or omissions or for any misinterpretation of the information within the publication and reserves the right to change without notice. BUTTERFLY VALVES

PN16 Vaild as of 081220 50 2.1 7.1 109 72 43 32 157 150 52.9 45 54 39 98 DN50 PN16 / 2” CL125 65 3.0 7.9 131.5 82 46 32 157 150 64.6 45 54 39 167 DN65 PN16 / 2.1/2” CL125 80 3.2 8.2 134 95 46 32 157 150 79 45 54 39 258 DN80 PN16 / 3” CL125 100 4.2 9.1 163 115 52 32 157 150 104.4 45 54 39 512 DN100 PN16 / 4” CL125 125 6.0 10.9 169 125 56 32 157 150 123.5 45 54 39 872 DN125 PN16 / 5” CL125 150 7.8 12.7 179 142 56 40 157 150 155.8 45 54 39 1,347 DN150 PN16 / 6” CL125 200 12.7 19.6 224 170 60 40 238 150 202.7 45 54 39 2,675 DN200 PN16 / 8” CL125 250 28.4 38.8 264 215 68 40 238 300 250.7 63 81 41.5 4,555 DN250 PN16 / 8” CL125 300 41.0 54.0 299 240 78 40 223.5 300 301.9 78 81 38.3 7,037 DN300 PN16 / 12” CL125 350 34.2 56.2 368 264 78 223.5 300 334 78 81 46.5 6,003 DN350 PN16 / 14” 400 62.4 88.4 400 305 86 277 450 390 78 81 39 8,885 DN400 PN16 / 16” 450 80.2 110.0 422 317 105 325 450 441 185 160 120 10,419 DN450 PN16 / 18” 500 120.5 160.5 479 352 130 325 450 492 185 160 120 13,613 DN500 PN16 / 20” 600 210 260.0 562 444 154 340 450 597 185 160 126 17,801 DN600 PN16 / 24” SIZE (mm) WEIGHT (kg) WEIGHT (kg) A (mm) B (mm) C (mm) D (mm) E (mm) F (mm) G (mm) H (mm) h (mm) M (mm) Kv FLANGE SLOTS TO SUIT BARESHAFT VALVE GEARBOX OPERATED DN50 PICTURED *Kv coefficient denotes valves in fully open position Datasheet_Views_F612_F622_F627_F626B 24.01.19.PDF 1 29/07/2019 15:38Datasheet_Views_F612_F622_F627_F626B 24.01.19.PDF 1 29/07/2019 15:38Datasheet_Views_F612_F622_F627_F626B 24.01.19.PDF 1 29/07/2019 15:38

Benefits • Robust, ductile iron valve body for long life service • Valve body fully lugged to fit PN16 or ANSI Class 125 flanges • The anti-blow out stem design provides a safe and secure operation • Integrated notch plate for a more compact design and aluminium lever to reduce risk of corrosion • Fully bonded epoxy paint system for superior corrosion resistance • Suitable for applications

corrosion protection is required • Maintenance free valve design, reducing downtime • Suitable for a wide temperature range -10°C to 130°C F614 / F628 F614 PRESSURE RATING: PN16 TEST PRESSURES: Shell: 24 Bar Seat: 17.6 Bar SPECIFICATION: Lever operated epoxy coated Ductile Iron Body. Fully lugged. Aluminium Bronze disc. EPDM or Nitrile liner. To suit flange connections BS EN 1092-2 PN16. Valves may be used for flow regulation. Valve design conforms to BS EN 593. Face to face conforms to BS EN 558. MEDIUM: F614 - Suitable for Group 1 and 2 gases and Group 1 and 2 liquids as defined by the Pressure Equipment Directive 2014/68/EU.* F628 - Suitable for Group 2 liquids as defined by the Pressure Equipment Directive 2014/68/EU.*

MAX TEMPERATURE (°C) -10 to 90 -10 to 130 PRESSURE (BAR) 16 15.7 F614 F628 Intermediate pressure ratings shall be determined by interpolation. BUTTERFLY VALVES

BALL VALVES 31 TECHNICAL HELPLINE: +44 (0)1473 277400 E: enquiries@cranefs.com W: www.cranefs.com GENERAL VALVES Every effort has been made to ensure that the information contained in this publication is accurate at the time of publishing. Crane Ltd assumes no responsibility or liability for typographical errors or omissions or for any misinterpretation of the information within the publication and reserves the right to change without notice. 50 3.3 8.3 109 72 43 32 157 150 52.9 45 54 39 98 4- M16x2.0 65 3.8 8.7 131.5 82 46 32 157 150 64.6 45 54 39 167 4- M16x2.0 80 4.7 9.7 134 90 46 32 157 150 79 45 54 39 258 8- M16x2.0 100 6.2 11.2 163 108 52 32 157 150 104.4 45 54 39 512 8- M16x2.0 125 8.9 13.9 169 125 56 32 157 150 123.5 45 54 39 872 8- M16x2.0 150 11.0 15.8 179 142 56 40 157 150 155.8 45 54 39 1,347 8- M20x2.5 200 16.1 23.0 224 165 60 40 238 150 202.7 45 54 39 2,675 12- M20x2.5 250 34.5 44.9 264 215 68 40 238 300 250.7 63 81 41.5 4,555 12- M24x3.0 300 51.2 64.2 299 240 78 40 223.5 300 301.9 78 81 38.3 7,037 12- M24x3.0 350 62.9 226.0 368 264 78 223.5 300 334 78 81 46.5 6,003 12- M24x3.0 400 97.8 277.0 400 299 86 277 450 390 78 81 39 8,885 16- M27x3.0 450 109.7 277.0 422 317.5 105 325 450 441 185 160 120 10,419 16- M27x3.0 500 175.5 332.0 479 352.5 130 325 450 492 185 160 120 13,613 20- M30x3.5 600 287.3 357.0 562 444 154 340 450 597 185 160 126 17,801 20- M33x3.5 SIZE (mm) WEIGHT (kg) WEIGHT (kg) A (mm) B (mm) C (mm) D (mm) E (mm) F (mm) G (mm) H (mm) h (mm) M (mm) Kv N-THREAD BARESHAFT VALVE GEARBOX OPERATED BUTTERFLY VALVES

• Robust, ductile iron valve body for long life service • Valve body fully-lugged for secure installation • The anti-blow out stem design provides a safe and secure operation • Fully bonded epoxy paint system for superior corrosion resistance • Suitable for applications where Level 3 C3 (Medium) corrosion protection is required • Maintenance free valve design, reducing downtime • Suitable for a wide temperature range -10°C to 130°C F615 / F629 / F628B F625 PRESSURE RATING: PN16 TEST PRESSURES: Shell: 24 Bar Seat: 17.6 Bar SPECIFICATION: Gearbox operated epoxy coated Ductile Iron Body. Semilugged. Aluminium Bronze disc. EPDM liner. To suit flange connections BS EN 1092-2 PN16. Valves may be used for flow regulation. Valve design conforms to BS EN 593. Face to face conforms to BS EN 300.

Every effort has been made to ensure that the information contained in this publication is accurate at the time of publishing. Crane Ltd assumes no responsibility or liability for typographical errors or omissions or for any misinterpretation of the information within the publication and reserves the right to change without notice. 32TECHNICAL HELPLINE: +44 (0)1473 277400 E: enquiries@cranefs.com W: www.cranefs.com GENERAL VALVES BUTTERFLY VALVES B A H a° N-M 8 4 3 1 6 5 9 2 7 ØD C L 11 10 12 04 PN25 DI DNXX XXXX L1 B A L ØDD a°L2 N-M 8 4 3 1 6 5 9 2 7 10 12 ØD C 04 XXXX DI PN25 DNXX FM639 DM639 Butterfly Double Regulating Valves Features

Benefits • Robust, ductile Iron valve bodies for long service life • Stainless Steel discs as standard • Suitable for wide temperature range -10°C to 120°C • Fully lugged for secure installation • Rated to PN25 • Lever and Gearbox operator options • A Double Regulating Valve allows for a stop position to be set and fixed. The valve can then be closed and re-opend to the same stop position to maintain commissioned flow rates. DM638 & DM639 Materials NO. PART MATERIAL SPECIFICATION 1 Body DI (EN-GJS-400-15) ASTM A536 65-45-12 2 Disc Stainless Steel 304 ASTM A351 CF8 3 Shaft Stainless Steel 431 ASTM A276 431 4 Short Bushing Aluminum Bronze ASTM B148-952A 5 Seat EPDM 6 Long Bushing Aluminum Bronze ASTM B148-952A 7 Long Bushing Aluminum Bronze ASTM B148-952A 8 ‘O’ Ring NBR 9 Pin Stainless Steel 431 ASTM A276 431 10 Top Cap (DM638) Carbon Steel ASTM A194 Gr. 2H 10 Hand Wheel (DM639) 11 Bolt Carbon Steel ASTM A194 Gr. 2H 12 Lever (DM638) Malleable Iron ASTM Gr. 32510 12 Gear Box (DM639) Cast Iron EN-GJL-250

SIZE (DN) WEIGHT (KG) A (mm) B (mm) C (mm) ØD (mm) N-M (mm) ØDD (mm) L1 L2 a° Kv* 50 5.0 138 65 43 125 4-M16 150 173.5 249 45° 40 65 7.0 153 83 46 145 8-M16 150 173.5 264 22.5° 110 80 6.6 155 88 46 160 8-M16 150 173.5 266 22.5° 253 100 10.5 178 105.5 52 190 8-M20 150 173.5 289 22.5° 440 125 14.0 193 123 56 220 8-M24 150 173.5 304 22.5° 586 150 15.6 210 135 56 250 8-M24 150 173.5 321 22.5° 1213 200 28.6 240 172 60 310 12-M24 300 237 436 15° 2625 250 40.9 285.4 202 68 370 12-M27 300 237 481.5 15° 5294 300 58.2 315 234.5 78 430 16-M27 300 229.5 524 11.25° 9209 PRESSURE/TEMPERATURE RATING: 25 Bar From -10˚c To 120˚c MEDIUM: Group 2 Liquids FLANGES: Fully Lugged to BS EN1092-2 FACE TO FACE: BS EN 558 DESIGN STANDARD: BS EN 593: 2009 TEST AND INSPECTION STANDARD: BS EN 12266-1 MOUNTING FLANGE: ISO 5211-2001 PN25 Vaild as of 140921 *Kv data denotes valves at fully open position

BALL VALVES 33 TECHNICAL HELPLINE: +44 (0)1473 277400 E: enquiries@cranefs.com W: www.cranefs.com GENERAL VALVES Every effort has been made to ensure that the information contained in this publication is accurate at the time of publishing. Crane Ltd assumes no responsibility or liability for typographical errors or omissions or for any misinterpretation of the information within the publication and reserves the right to change without notice. DN700 - DN1200 DN1400 - DN1800 FM700 / FM701 & FM700B

SIZE (DN) A (mm) B (mm) C (mm) D (mm) E (mm) F (mm) G (mm) H (mm) I (mm) J (mm) K (mm) L (mm) M (mm) N (mm) P (mm) FLANGE THICKNESS WEIGHT (kg) Gearbox Bareshaft FLOW (kv) DN700 N/A 20-Ø37 7.5 840 4-M33 537 629 18 110 165 4-Ø40 910 398 397 883 39.5 350 310 42818 DN800 N/A 20-Ø41 7.5 950 4-M36 596 666 20 110 190 4-Ø40 1025 500 417 971 43 450 410 33086 DN900 N/A 24-Ø41 6.43 1050 4-M36 656 720 20 110 203 4-Ø42 1125 500 450 1032 46.5 605 550 75688 DN1000 2-Ø40 24-Ø44 6.43 1170 4-M39 720 800 22 130 216 4-Ø45 1255 500 470 1109 50 810 740 103584 DN1200 2-Ø46 28-Ø50 5.625 1390 4-M45 864 942 28 130 254 N/A 1485 600 491 1327 57 1270 1130 133210 DN1400 2-Ø48 32-Ø44 5 1590 4-M39 1014 1000 40 180 279 N/A 1675 600 491 1385 46 1645 1510 152700 DN1600 2-Ø50 36-Ø50 4.5 1820 4-M45 1071 1155 40 180 318 N/A 1915 500 571 1685 49 3540 3200 175700 DN1800 2-Ø50 40-Ø50 4.09 2020 4-M45 1178 1300 45 200 356 N/A 2115 500 665 1853 52 5900 5310 211060 ØD P 6 10 1 4 14 ØL 9 ØE ØB 11 2 F 12 7 ØA 3 15 13 C° 8 ØM 5 N 16 J H G PN10 DI ØD P 6 10 1 4 14 ØL 9 ØE ØB 11 2 F 12 7 ØA 3 15 13 C° 8 ØM 5 N 16 J H G PN10 DI PRESSURE RATING: DN700 - DN1200 PN16, DN1400 - DN1800 PN10 TEMPERATURE RATING: -20°C to 120°C FACE TO FACE DIMENSIONS: BS EN 558: 2011 Series 20 END CONNECTIONS: Flanges to BS EN 1092 PN10 and PN16 ACTUATOR MOUNTING FLANGES: ISO 5211: 2001 OPERATORS: Gearbox - FM700 - (Disc SS 316) / FM701 (Disc SS 304) BARESHAFT VALVE OPTIONS: FM700B MEDIUM: Manufactured to BS EN 593: 2009. Complies with Pressure Equipment Directive 2014/68/EU. Features & Benefits • Suitable for Gearbox or Actuator operation • Rugged construction: Ductile Iron Body for all sizes • Stainless Steel disc as standard • Epoxy paint coated as standard • Low operating torques • Metric flange and hole pattern PN16 PN10 Vaild as of 140921 FM700 BUTTERFLY VALVES

ØD P 6 10 1 4 14 ØL 9 ØE ØB 11 2 F 12 7 ØA 3 15 13 C° 8 ØM 5 N 16 J H G PN10 DI ØD P 6 10 1 4 14 ØL 9 ØE ØB 11 2 F 12 7 ØA 3 15 13 C° 8 ØM 5 N 16 J H G PN10 DI SIZE (inch) A (mm) B (mm) C (mm) D (mm) E (mm) F (mm) G (mm) H (mm) I (mm) J (mm) K (mm) L (mm) M (mm) N (mm) P (mm) FLANGE THICKNESS WEIGHT (kg) Gearbox Bareshaft FLOW (kv) 26" N/A 20-Ø35 7.5 806.5 4-1.25-7 485 565 14 110 165 N/A 870 600 346 913 39.5 307 270 37300 28" N/A 24-Ø35 6.43 863.6 4-1.25-7 537 629 18 110 165 4-Ø40 927 398 397 883 39.5 380 340 42818 30" N/A 24-Ø35 6.43 914.4 4-1.25-7 565 660 18 110 165 4-Ø40 984 500 417 965 43 410 370 63513 32" N/A 24-Ø41 6.43 977.9 4-1.5-6 596 666 20 110 190 4-Ø40 1060 500 417 971 43 490 450 33086 34" N/A 28-Ø41 5.625 1028.7 4-1.5-6 633 720 20 110 200 4-Ø40 1111 500 450 1032 45 585 530 52300 36" N/A 28-Ø41 5.625 1085.9 4-1.5-6 656 720 20 110 203 4-Ø42 1168 500 450 1032 46.5 665 610 75688 38" N/A 28-Ø41 5.625 1149.4 4-1.5-6 675 708 22 110 200 4-Ø44 1238 600 450 1070 50 745 690 91500 40" 2-Ø40 32-Ø41 5 1200.1 4-1.5-6 720 800 22 130 216 4-Ø45 1289 500 470 1109 50 830 760 103584 42" N/A 32-Ø41 5 1257.3 4-1.5-6 772 850 22 130 251 4-Ø47 1346 500 470 1159 53.5 1070 1000 101638 48" 2-Ø46 40-Ø41 4.1 1422.4 4-1.5-6 864 942 28 130 254 N/A 1511 600 491 1327 57 1300 1160 133210 56" 2-Ø48 44-Ø47.8 3.75 1651 4-1.75-5 1014 1000 40 180 279 N/A 1746 600 491 1385 46 1676 1550 152700 PRESSURE RATING: 26" - 56" ANSI CLASS 150 TEMPERATURE RATING: -20°C to 120°C FACE TO FACE DIMENSIONS: BS EN 558: 2011 Series 20 END CONNECTIONS: ASME B16.47A ACTUATOR MOUNTING FLANGES: ISO 5211: 2001 OPERATORS: Gearbox - FA700 (Disc SS 316) / FA701 (Disc SS 304) BARESHAFT VALVE OPTIONS: FA700B MEDIUM: Manufactured to BS EN 593: 2009. Complies with Pressure Equipment Directive 2014/68/EU.Equipment Directive 2014/68/EU. Features & Benefits • Suitable for Gearbox or Actuator operation • Rugged construction: Ductile Iron Body for all sizes • Stainless Steel disc as standard • Epoxy paint coated as standard • Low operating torques • ANSI flange and hole pattern 26" – 56" Vaild as of 140921 FA700 BUTTERFLY VALVES

BALL VALVES 35 TECHNICAL HELPLINE: +44 (0)1473 277400 E: enquiries@cranefs.com W: www.cranefs.com GENERAL VALVES Every effort has been made to ensure that the information contained in this publication is accurate at the time of publishing. Crane Ltd assumes no responsibility or liability for typographical errors or omissions or for any misinterpretation of the information within the publication and reserves the right to change without notice. Large Diameter Butterfly Valve Features & Benefits • Suitable for Gearbox or Actuator operation • Rugged construction: ductile Iron Body for all sizes • Stainless Steel disc as standard • Epoxy paint coated as standard • Low operating torques • Double regulating feature on gearboxes • ANSI flange and hole pattern FA725G

Materials Dimensions & Weights Kv Values NO. PART MATERIAL SPECIFICATION 1 Key Carbon Steel ASTM A29 1045 2 Screw Carbon Steel ASTM A194 Gr.2H 3 Short Bushing PTFE 4 O’ Ring NBR 5 Upper Shaft Stainless Steel ASTM A276 420 6 Body Ductile Iron EN-GJS-400-15 7 Long Bushing PTFE 8 Seat + Backing Ring EPDM + Aluminium 9 Disc Stainless Steel ASTM A351 CF8M 10 Pin Stainless Steel ASTM A276 431 11 Lower Shaft Stainless Steel ASTM A276 420 12 Bearing High Carbon Steel ASTM A295 52100 13 Lower adjusting shim Carbon Steel ASTM A36 14 Screw Carbon Steel ASTM A194 Gr. 2H 15 Lower Gland Carbon Steel EN-GJS-400-15 16 Gearbox Cast Iron SIZE (inch) A (mm) B (mm) C (mm) D (mm) E (mm) F (mm) G (mm) H (mm) I (mm) J (mm) K (mm) L (mm) M (mm) N (mm) P (mm) FLANGE THICKNESS WEIGHT (kg) Gearbox Bareshaft FLOW (kv) 26" N/A 20-Ø35 7.5 806.5 4-1.25-7 510 565 14 110 165 N/A 870 400 301 868 39.5 490 410 37300 28" N/A 24-Ø35 6.43 863.6 4-1.25-7 537 629 18 110 165 4-Ø40 927 400 301 957 39.5 548 468 42818 30" N/A 24-Ø35 6.43 914.4 4-1.25-7 565 660 20 110 165 4-Ø40 984 400 355 1017 43 647 550 63513 32" N/A 24-Ø41 6.43 977.9 4-1.5-6 596 666 20 110 190 4-Ø40 1060 400 355 1023 43 725 628 33086 34" N/A 28-Ø41 5.625 1028.7 4-1.5-6 633 720 20 110 200 4-Ø40 1111 400 355 1077 45 852 755 52300 36" N/A 28-Ø41 5.625 1085.9 4-1.5-6 656 720 20 110 203 4-Ø42 1168 400 355 1077 46.5 972 875 75688 SIZE (inch) DISC POSITION ( ˚ ) 10 20 30 40 50 60 70 80 90 26" 20 1050 220 4850 8600 14300 22600 33900 37300 28" 31 1568 3148 5740 8650 12931 19695 30187 42818 30" 32 1799 3811 8257 14714 24347 38531 57798 63513 32" 39 2065 4144 7557 11927 17830 27157 41621 33086 34" 150 2300 5000 9200 14500 22800 36100 55000 52300 36" 225 2638 5821 11020 17490 28113 45413 68854 75688 PRESSURE RATING: 26"-36" PN16 TEMPERATURE RATING: -20°C to 120°C FACE TO FACE DIMENSIONS: BS EN 558: 2011 Series 20 END CONNECTIONS: ASME B16.47A ACTUATOR MOUNTING FLANGES: ISO 5211: 2001 OPERATORS: Gearbox MEDIUM: Manufactured to BS EN 593: 2009. Complies with Pressure Equipment Directive 2014/68/EU. PN16 Vaild as of 100521 FA725 ØD P 6 10 1 4 14 ØL 9 ØE ØB 11 2 F 12 7 ØA 3 15 13 C° 8 ØM 5 N 16 J H G DNXXXX PN10 DI ØD P 6 10 1 4 14 ØL 9 ØE ØB 11 2 F 12 7 ØA 3 15 13 C° 8 ØM 5 N 16 J H G DNXXXX PN10 DI BUTTERFLY VALVES

Every effort has been made to ensure that the information contained in this publication is accurate at the time of publishing. Crane Ltd assumes no responsibility or liability for typographical errors or omissions or for any misinterpretation of the information within the publication and reserves the right to change without notice. 36TECHNICAL HELPLINE: +44 (0)1473 277400 E: enquiries@cranefs.com W: www.cranefs.com GENERAL VALVES Large Diameter Butterfly Valve Features & Benefits • Suitable for Gearbox or Actuator operation • Rugged construction: Ductile Iron Body for all sizes • Stainless Steel disc as standard • Epoxy paint coated as standard • Low operating torques • Double regulating features on gearboxes • Metric flange and hole pattern FM725G

Materials Dimensions & Weights Kv Values NO. PART MATERIAL SPECIFICATION 1 Key Carbon Steel ASTM A29 1045 2 Screw Carbon Steel ASTM A194 Gr.2H 3 Short Bushing PTFE 4 O’ Ring NBR 5 Upper Shaft Stainless Steel ASTM A276 420 6 Body Ductile Iron EN-GJS-400-15 7 Long Bushing PTFE 8 Seat + Backing Ring EPDM + Aluminium 9 Disc Stainless Steel ASTM A351 CF8M 10 Pin Stainless Steel ASTM A276 431 11 Lower Shaft Stainless Steel ASTM A276 420 12 Bearing High Carbon Steel ASTM A295 52100 13 Lower adjusting shim Carbon Steel ASTM A36 14 Screw Carbon Steel ASTM A194 Gr. 2H 15 Lower Gland Carbon Steel EN-GJS-400-15 16 Gearbox Cast Iron SIZE (DN) A (mm) B (mm) C (mm) D (mm) E (mm) F (mm) G (mm) H (mm) I (mm) J (mm) K (mm) L (mm) M (mm) N (mm) P (mm) FLANGE THICKNESS WEIGHT (kg) Gearbox Bareshaft FLOW (kv) DN700 N/A 20-Ø37 7.5 840 4-M33 537 629 18 110 165 4-Ø40 910 400 301 957 39.5 548 468 42818 DN800 N/A 20-Ø41 7.5 950 4-M36 596 666 20 110 190 4-Ø40 1025 400 355 1023 43 725 628 33086 DN900 N/A 24-Ø41 6.43 1050 4-M36 656 720 20 110 203 4-Ø42 1125 400 355 1077 46.5 972 875 75688 SIZE (mm) DISC POSITION ( ˚ ) 10 20 30 40 50 60 70 80 90 700 31 1568 3148 5740 8650 12931 19695 30187 42818 800 39 2065 4144 7557 11927 17830 27157 41621 33086 900 225 2638 5821 11020 17490 28113 45413 68854 75688 PRESSURE RATING: DN700 - DN900 PN16 TEMPERATURE RATING: -20°C to 120°C FACE TO FACE DIMENSIONS: BS EN 558: 2011 Series 20 END CONNECTIONS: Flanges to BS EN 1092 PN16 ACTUATOR MOUNTING FLANGES: ISO 5211: 2001 OPERATORS: Gearbox MEDIUM: Manufactured to BS EN 593: 2009. Complies with Pressure Equipment Directive 2014/68/EU. PN16 Vaild as of 081220 FM725 ØD P 6 10 1 4 14 ØL 9 ØE ØB 11 2 F 12 7 ØA 3 15 13 C° 8 ØM 5 N 16 J H G DNXXXX PN10 DI ØD P 6 10 1 4 14 ØL 9 ØE ØB 11 2 F 12 7 ØA 3 15 13 C° 8 ØM 5 N 16 J H G DNXXXX PN10 DI BUTTERFLY VALVES

Dimensions & Weights SPECIFICATION: End connections compatible with BS EN1092-2 PN16 & ANSI B16.1 Class 125 flanges. TEST PRESSURES: (Hydrostatic) SHELL: 24 bar SEAT: 17.6 bar PN16 / ANSI 125 SIZE (mm) WEIGHT (kg) H2 H1 L H L1 ØE Kv 50 2.6 141 61 43 32 216 52.9 133 65 3.0 153 72 46 32 216 64.7 227 80 3.4 161 87 46 32 216 79.1 349 100 4.9 179 106 52 32 265 104.4 694 125 6.3 193 123 56 32 265 123.3 1181 150 7.3 204 137 56 32 265 155.6 1825 200 12.2 247 174 60 45 374 202.5 2503 DUCTILE IRON DISC F646L F641L STAINLESS STEEL DISC F656L F651L ALUMINIUM BRONZE DISC F676L F671L EPDM LINER NITRILE LINER TEMPERATURE (°C) -10 to 120 -10 to 82 PRESSURE (BAR) 16 16 F646L/F656L/F676L F641L/F651L/F671L Vaild as of 081220 L1 L H2 H1 H E DN100 153 52.9 174DN200 247 DN125 32 56 Size 106 32 LEVER WT. Kg 179 46 DN150 32 61 H 204 141 60 45 137 32 L1 87 56 161 52 H1 32 43 155.6 H2 46 123.3 DN50 123 ØE 104.4 DN65 193 202.5 79.1 L DN80 32 72 64.7 694 133 227 2503 349 1825 KV 1181 SEMI LUGGED LEVER 265 2.6 3.0 265 265 216 12.2 216 3.4 374 216 7.3 6.3 4.9 L1 L H2 H1 H E DN100 153 52.9 174DN200 247 DN125 32 56 Size 106 32 LEVER WT. Kg 179 46 DN150 32 61 H 204 141 60 45 137 32 L1 87 56 161 52 H1 32 43 155.6 H2 46 123.3 DN50 123 ØE 104.4 DN65 193 202.5 79.1 L DN80 32 72 64.7 694 133 227 2503 349 1825 KV 1181 SEMI LUGGED LEVER 265 2.6 3.0 265 265 216 12.2 216 3.4 374 216 7.3 6.3 4.9 L1 E L H1 H2 H EXPORT BUTTERFLY VALVES

BALL VALVES 39 TECHNICAL HELPLINE: +44 (0)1473 277400 E: enquiries@cranefs.com W: www.cranefs.com GENERAL VALVES Every effort has been made to ensure that the information contained in this publication is accurate at the time of publishing. Crane Ltd assumes no responsibility or liability for typographical errors or omissions or for any misinterpretation of the information within the publication and reserves the right to change without notice. H DD L1 H1 L E H2 37.0 82.0 48.0 11.5 20.1 45 DN100 153 7.8 285 300 145 52.9 174DN200 255 DN600 BARESHAFT WT.Kg 36.0 247 DN125 327.4 56 300 157 250.5 330375 24.7 7.0 154 157 440.5 367 Size 106 127 145 157 DN400 32 64 GEARBOX WT. Kg 310 179 46 157 DN150 207.0 64 32 61 68 DD 236 254 157 H 82443 280 57.0 204 141 60 145 23645 137 32 114 301.6 389.5 DN450 104.0 2.1 78 L1 301 592.7 317.5 48 157.0 87 2.5 56 157 246 DN300 26.0 134.0 1612.9 52 145 H1 DN500 11.3 100.0 64 32 4.2 43 400 300 300 237 246 155.6 H2 45324 5.6 46 145 300237 123.3 17.3DN250 DN50 123 78 380 145 489.7 ØE 104.4 340 253 425 6.6 DN65 19310.5 202.5 333.6 79.1 L 505 209 75.0 DN350 DN80 32 72 9.1 102 64.7 694 133 24125 227 12041 2503 18449 6736 349 1825 8135 KV 1181 3876 14121 SEMI LUGGED GEARBOX Semi-Lugged Wafer Pattern Gearbox Operated Butterfly Valves Features & Benefits • Universal Pattern - Valves are suitable for use with flanges conforming to BS EN 1092-2 PN16 or ANSI B16.1 Class 125 • Valve to BS EN593 • Ductile Iron, Stainless Steel, Aluminium Bronze Disc Options • EPDM and Nitrile Seat Liner Options • 420 Stainless Steel Shafts for superior strength F646G / F641G / F656G / F651G / F676G / F671G F646G Pressure/Temperature Ratings PRESSURE RATING: PN16 & ANSI Class 125 END CONNECTION: Semi-Lugged OPERATOR: Gearbox OTHER: Bare shaft options available (Fig No. F646B / F641B / F656B / F651B / F676B / F671B) Please contact us for bare shaft top works details

WEIGHT (kg) SIZE (mm) BARESHAFT GEARBOX H2 H1 L H L1 ØE DD Kv 50 2.1 7.0 141 61 43 32 157 52.9 145 133 65 2.5 7.4 153 72 46 32 157 64.7 145 227 80 2.9 7.8 161 87 46 32 157 79.1 145 349 100 4.2 9.1 179 106 52 32 157 104.4 145 694 125 5.6 10.5 193 123 56 32 157 123.3 145 1181 150 6.6 11.5 204 137 56 32 157 155.6 145 1825 200 11.3 20.1 247 174 60 45 236 202.5 300 2503 250 17.3 26.0 280 209 68 45 236 250.5 300 3876 300 24.7 36.0 324 253 78 45 237 301.6 300 6736 350 37.0 48.0 310 255 78 48 237 333.6 300 8135 400 57.0 82.0 340 317.5 102 64 246 389.5 300 12041 450 75.0 100.0 375 330 114 64 246 440.5 380 14121 500 104.0 134.0 425 367 127 64 254 489.7 285 18449 600 157.0 207.0 505 443 154 82 301 592.7 400 24125 Valid as of 081220 L1 DD E L H1 H2 H EXPORT BUTTERFLY VALVES

• Valves are suitable for use with flanges conforming to BS EN 1092-2 PN16 • Valve to BS EN593 • Ductile Iron, Stainless Steel, Aluminium Bronze Disc Options • EPDM and Nitrile Seat Liner Options • 420 Stainless Steel Shafts for superior strength F648L / F644L / F658L / F654L / F678L / F674L PRESSURE RATING: PN16 END CONNECTION: Fully Lugged OPERATOR: Trigger Lever OTHER: Bare shaft options available (Fig No. F648B / F658B / F644B / F654B / F678B / F674B) Please contact us for bare shaft top works details

Dimensions & Weights SPECIFICATION: End connections compatible with BS EN1092-2 PN16 flanges. TEST PRESSURES: (Hydrostatic) SHELL: 24 bar SEAT: 17.6 bar PN16 SIZE (mm) WEIGHT (kg) H2 H1 L H L1 ØE Kv 50 3.5 141 61 43 32 216 52.9 133 65 3.9 153 72 46 32 216 64.7 227 80 5.2 161 87 46 32 216 79.1 349 100 7.3 179 106 52 32 265 104.4 694 125 9.8 193 123 56 32 265 123.3 1181 150 10.7 204 137 56 32 265 155.6 1825 200 18.3 247 174 60 45 374 202.5 2503 Valve

Pressure/Temperature Ratings TEMPERATURE (°C) -10 to 120 -10 to 82 PRESSURE (BAR) 16 16 F648L/F658L/F678L F644L/F654L/F674L Valid as of 081220 H2 H1 H L E L1 DN100 153 52.9 174DN200 247 DN125 32 56 Size 106 32 LEVER WT. Kg 179 46 DN150 32 61 H 204 141 60 45 137 32 L1 87 56 161 52 H1 32 43 155.6 H2 46 123.3 DN50 123 ØE 104.4 DN65 193 202.5 79.1 L DN80 32 72 64.7 694 133 227 2503 349 1825 KV 1181 FULLY LUGGED / LEVER 265 265 265 216 216 374 216 18.3 9.8 10.7 7.3 3.5 5.2 3.9 L1 E L H1 H2 H F648L EXPORT BUTTERFLY VALVES

BALL VALVES 41 TECHNICAL HELPLINE: +44 (0)1473 277400 E: enquiries@cranefs.com W: www.cranefs.com GENERAL VALVES Every effort has been made to ensure that the information contained in this publication is accurate at the time of publishing. Crane Ltd assumes no responsibility or liability for typographical errors or omissions or for any misinterpretation of the information within the publication and reserves the right to change without notice. EXPORT BUTTERFLY VALVES

DUCTILE IRON DISC F648G F644G STAINLESS STEEL DISC F658G F654G ALUMINIUM BRONZE DISC F678G F674G EPDM LINER NITRILE LINER Fully Lugged Gearbox Operated Butterfly Valves F648G / F644G / F658G / F654G / F678G / F674G F648G PRESSURE RATING: PN16 END CONNECTION: Fully Lugged OPERATOR: Gearbox OTHER: Bare shaft options available (Fig No. F648B / F644B / F658B / F654B / F678B / F674B) Please contact us for bare shaft top works details

BALL VALVES 43 TECHNICAL HELPLINE: +44 (0)1473 277400 E: enquiries@cranefs.com W: www.cranefs.com GENERAL VALVES Every effort has been made to ensure that the information contained in this publication is accurate at the time of publishing. Crane Ltd assumes no responsibility or liability for typographical errors or omissions or for any misinterpretation of the information within the publication and reserves the right to change without notice.

Drawing DD H H1 L1 L E H2 45 DN100 285 300 145 52.9 174DN200 260 DN600 BARESHAFT WT.Kg DN125 32 56 300 157 250.5 330 154 157 440.5 367 Size 106 127 145 157 DN400 32 64 GEARBOX WT. Kg 46 157 DN150 64 32 61 68 DD 236 254 157 H 82443 60 145 23645 137 32 114 301.6 389.5 DN450 78 L1 301 592.7 317.5 48 87 56 157 246 DN300 52 145 H1 DN500 64 32 43 400 300 300 237 246 155.6 H2 45 46 145 300237 123.3 DN250 DN50 123 78 380 145 489.7 ØE 104.4 253 DN65 202.5 333.6 79.1 L 209 DN350 DN80 32 72 102 64.7 694 133 24125 227 12041 2503 18449 6736 349 1825 8135 KV 1181 3876 14121 FULLY LUGGED GEARBOX 247 7.9 4.7 14.0 280 310 3.4 161 34.0 193 11.5 63.0 140.0 8.3 6.6 170.0 14.9 324 179 204 52.0 340 17.4 106.0 10.0 26.2 220.0 3.0 9.1 34.0 9.6 141 81.0 505 131.0 25.0 425 375 46.0 106.0 153 270.0 L1 DD E L H1 H2 H EXPORT BUTTERFLY VALVES

LOCATION: Doha, Qatar CLIENT: Kempenski CONSULTANT: Arab Engineering Bureau CONTRACTOR: CDC Construction Development Company CHANNEL PARTNER: AlRiyadh Trading & Contracting SPECIFICATION: Crane FS Balancing Valves and a wide selection of General Valves and Strainers. CASE STUDY : BUILDING SERVICES

Fitted with fan coils and chilled beams, Crane Fluid System’s Dominator has been installed throughout the build. The Dominator is a compact prefabricated unit which combines essential control components and connecting pipework which is ready for a simple and fast on-site connection to the terminal units. The Dominator allows the Rail House to control and measure flow around the building and is ideal for flushing and isolation.

Crane Fluid Systems provided a range of General Valves to the extension of The Lyric Hammersmith Theatre in London. The new £16.5 million building is changing the landscape of Hammersmith with a new drama, dance, film and TV recording studios; a 60-seat cinema; and a new bar and café. As well as this large extension to the west of the theatre, the existing building will undergo its first major facelift in 30 years.

LOCATION: Hammersmith, London CLIENT: Lyric Theatre CONTRACTOR: Mace Plus DISTRIBUTOR: Pipe - Greenford SPECIFICATION: General valves CASE STUDY : BUILDING SERVICES

Check valves permit flow in one direction only, and close automatically if flow reverses. They are entirely automatic in action, depending upon pressure and velocity of flow within the line to perform their functions of opening and closing. Most Crane Fluid System swing check valves can be installed in horizontal or vertical upward flow piping. Lift check valves must be used in horizontal lines only.

Swing check valves, having 6 diameters of straight lengths of pipe upstream and 3 diameters downstream, are suitable for velocities up to 3 metres/second. If the valve is situated such that turbulent flow enters the valve, the velocity should not exceed 2 metres/second.

Horizontal lift check valves are primarily used for air, gas and steam services whilst swing check valves are most suitable for water and other liquids.

Compressed air service requires a horizontal lift check valve with a nitrile rubber facing on the disc and fitted with a recoil spring. The valve should always be installed as far away from the compressor as possible.

When selecting valves, reference to codes of practice and other mandatory specifications should be made which may preclude certain types for specific applications.

Double check valves are designed to prevent contamination of water caused by back syphonage, back flow and cross connection in supplies such as those to hose taps, cisterns, stand pipes, showers and basins.

48TECHNICAL HELPLINE: +44 (0)1473 277400 E: enquiries@cranefs.com W: www.cranefs.com GENERAL VALVES CHECK VALVES Valid as of 140921 APPLICATION Model Size Range Pressure Rating Type of Operation Body material WRAS approval CHW Potable Water LTHW MTHW MTHW D104 1/2" - 2" PN20 Vertical Lift Bronze 4 4 4 4 D116 1/2" - 3" PN32 Vertical Lift Bronze 4 4 4 4 D138 3/8" - 3" PN25 Swing Bronze 4 4 4 4 D140 1/2" - 3" PN25 Swing Bronze 4 4 4 D140W 3/4" - 2" PN25 Swing Bronze 4 4 4 4 4 D142 1/4" - 3" PN32 Swing Bronze 4 4 4 4 D220W 1/2" - 2" PN16 In-Line Double Check DZR Brass 4 4 4 4 4 D220CW 15 - 28 mm PN16 In-Line Double Check DZR Brass 4 4 4 4 4 Copper

BALL VALVES 49 TECHNICAL HELPLINE: +44 (0)1473 277400 E: enquiries@cranefs.com W: www.cranefs.com GENERAL VALVES Every effort has been made to ensure that the information contained in this publication is accurate at the time of publishing. Crane Ltd assumes no responsibility or liability for typographical errors or omissions or for any misinterpretation of the information within the publication and reserves the right to change without notice. CHECK VALVES Bronze

• Check valves permit flow in one direction only and close automatically if flow reverses • Entirely automatic in action, depending upon pressure and velocity of flow within the line to perform their functions of opening and closing • Lift Check Valves should only be used in horizontal pipe runs D104 D104

PN20 Valid as of 140921 NO. PART MATERIAL SIZES 1 Body Bronze BS EN 1982 CC491K All 2 Cap Brass BS EN 12164 CW614N 1/2 only 2 Cap Bronze BS EN 1982 CC491K 3/4 - 2 3 Disc Bronze BS EN 1982 CC491K 1 - 2 3 Disc Brass BS EN 12164 CW614N 1/2 & 3/4 4 ID Plate Aluminium All 5 Drive Pin Steel - Electro Brassed All Materials PRESSURE RATING: PN20 TEMPERATURE OPERATING RANGE: -10 to 180°C UK END CONNECTION: BS 21 Taper US END CONNECTION: ANSI B1.20.1 OPERATOR: Lift Check Valve SPECIFICATION: Valves are manufactured in accordance with BS 5154. Disc is spherical shaped guided in the cap. Body seat is integral. This valve is not suitable for use on Group 1 gases or unstable fluids, as defined by the Pressure Equipment Directive 2014/68/EU.* * See page 159 for more information Dimensions

SPECIFICATION: Valves are manufactured in accordance with BS 5154 PN32 for Series B ratings. The design incorporates a disc holder which is guided in the seat bore and the cap. The body seat is integral of the semi-crown type. Sizes 1/4” to 2” have a

PN32 Vaild as of 081220 PRESSURE RATING: PN32 TEMPERATURE OPERATING RANGE: -10 to 198°C UK END CONNECTION: BS 21 Taper US END CONNECTION: ANSI B1.20.1 OPERATOR: Lift Check Valve

BALL VALVES 51 TECHNICAL HELPLINE: +44 (0)1473 277400 E: enquiries@cranefs.com W: www.cranefs.com GENERAL VALVES Every effort has been made to ensure that the information contained in this publication is accurate at the time of publishing. Crane Ltd assumes no responsibility or liability for typographical errors or omissions or for any misinterpretation of the information within the publication and reserves the right to change without notice. CHECK VALVES Vaild as of 030221 Bronze

• Check valves permit flow in one direction only and close automatically if flow reverses • Horizontal swing pattern • Robust and high quality bronze body. D135 D135 PN20 PRESSURE RATING: PN20 TEMPERATURE OPERATING RANGE: -10 to 180 °C UK END CONNECTION: Taper threaded to BS EN 10226-2 (ISO 7-1) formerly BS 21 US END CONNECTION: ANSI B1.20.1 (please add suffix AT to denote American Thread) SPECIFICATION: Bronze Check Valve, Metal seated, with body and cap to BSEN1982 CC491K, SS 316 hinge pin, PN20 rating in accordance with BS5154. This valve falls under SEP category and suitable for use on Group 1 & 2 Liquids and Group 2 Gas, as defined by the Pressure Equipment Directive 2014/68/EU.* * See page 159 for more information Dimensions

Valves are manufactured in accordance with BS5154:1991 PN25 for Series B ratings. This valve is not suitable for use on Group 1 gases or unstable fluids, as defined by the Pressure Equipment Directive 2014/68/EU.*

SPECIFICATION: Bronze Swing Check Valve, Screwed Cap, in accordance with BS 5154:1991, PN25 rated. Valve Body, Cap and hinge to Bronze to BS EN 1982 CC491K. Nitrile Rubber coated Brass and Bronze disc. BSI Kitemark approved.

MSS SP80 CONFORMANCE: D140 complies with MSS SP 80, however, valve markings and threaded ends confirms with BS EN 12288:2010 only. D140.AT complies with threaded ends as well. The Valve is suitable for use in group 2 gases, group 1 and group 2 liquids, as defined by the Pressure Equipment Directive 2014/68/EU.*

BALL VALVES 53 TECHNICAL HELPLINE: +44 (0)1473 277400 E: enquiries@cranefs.com W: www.cranefs.com GENERAL VALVES Every effort has been made to ensure that the information contained in this publication is accurate at the time of publishing. Crane Ltd assumes no responsibility or liability for typographical errors or omissions or for any misinterpretation of the information within the publication and reserves the right to change without notice.

D140 D140 PN25 PRESSURE RATING: PN25 TEMPERATURE OPERATING RANGE: -10 To 100°c UK END CONNECTION: Taper threaded to BS EN 10226-2 (ISO 7-1) formerly BS 21 US END CONNECTION: ANSI B1.20.1 (please add suffix AT to denote American Thread) OPERATOR: Swing Type Check Valve

MSS S

crane safety valve made in china

You Might Also Be Interested In