danfoss ps40 safety valve quotation

If you are looking for Danfoss USA Product Store and catalog - which enables you to purchase our products - then please select the USA Product Store button.

With the SFA 10 and DSV 10 change-over valve, Danfoss is widening its range of highly reliable safety valves designed to industrial standards. The new safety valves with their lower capacity and higher pressure range up to 65 bar provide more flexibility in system design. The SFA 10 can now be used in C02 applications on the low-pressure site as well as in low-charge ammonia systems. Furthermore, the spring housing is designed for reliability, increased lifetime, and to have no sudden reliefs below set pressure.

At Mittal Chambers, Secunderabad, Telangana, “Anvik Industrial Controls” is an entity that is instrumental in the business of wholesaling and trading optimum quality products. Since 1999, we are working as a partnership based entity, engrossed in shipping a top-notch quality spectrum of Brazed Plate Heat Exchanger, Industrial Control Valve, Pressure Switch, Solenoid Valve, Oil Separator, Filter Dryer, Strainer Housing Ammonia and many more. By preserving an enthusiastic approach towards quality, our business has been able to undergo in the competitive industries. Moreover to this, our knowledgeable professionals who are devoted to their work are assisting us in every sphere whether its logistics, quality testing or packaging.

The SFVL safety valves are backpressure dependent pressure relief valves. These are designed for protection of vessels and other components against excessive pressure. These valves are recommended as an external and internal safety relief valve in refrigeration plants.

These valves are manufactured according to strict quality demands and safety requirements for refrigeration installations, as specifi ed in many markets and comply with ASHRAE Addendum15C-2000. These valves are manufactured in accordance with the ASME Quality Control Procedures and stamped with the UV symbol. They are certifi ed by the United States National Board of Boiler & Pressure Vessel Inspectors and are stamped with the NB symbol

All relief valves come with an installation tag and cable wire. Each valve’s identifi cation tag has information regarding the catalogue number, month and year of manufacture, set pressure, inlet pipe size and capacity for AIR in units of SCFM. The tag is fastened with drive rivets for security.

Relief valves are subject to 100% factory testing through three separate test sequences to verify quality and set pressure before being factory sealed for security.

The Danfoss SFVL safety valves are back-pressure dependent pressure relief valves. These are designed for protection of vessels and other components against excessive pressure. These valves are recommended as an external and internal safety relief valve in refrigeration plants. These valves are manufactured according to strict quality demands and safety requirements for refrigeration installations, as specified in many markets and comply with ASHRAE Addendum15C-2000. These valves are manufactured in accordance with the ASME Quality Control Procedures and stamped with the UV symbol. They are certified by the United States National Board of Boiler & Pressure Vessel Inspectors and are stamped with the NB symbol.

A set of radiator thermostats. RAE 5054 thermostatic element for RA connection with liquid filling, limitation of Min/Max settings, temp. limits 8-28 °C and RA-FN 15 valve without preset, for two-pipe systems, straight DN15/kvs 0.90 and RLV-S 15 shut-off valve DN15, straight, kvs 2.2

A set of radiator thermostats. RAE 5054 thermostatic element for RA connection with liquid filling, limitation of Min/Max settings, temp. limits 8-28 °C and RA-FN 15 valve without preset, for two-pipe systems, straight DN15/kvs 0.90 and RLV-S 15 shut-off valve DN15, straight, kvs 2.2

A set of radiator thermostats. RAE 5054 thermostatic element for RA connection with liquid filling, limitation of Min/Max settings, temp. limits 8-28 °C and RA-N 15 valve with preset, for two-pipe systems, corner DN15/kvs 0.90

A set of radiator thermostats. RAE 5054 thermostatic element for RA connection with liquid filling, limitation of Min/Max settings, temp. limits 8-28 °C and RA-N 15 valve with preset, for two-pipe systems, straight DN15/kvs 0.90

VFG2 PN16 DN150 kvs 280 control valve two-hole working temperature 2+140 °C connection - flange, stroke 24 mm (30 mm with AMV613-Y60), gray cast iron EN-GJL-250 (GG-25)

VFG2 PN16 DN200 kvs 320 control valve two ports working temperature 2+140 °C connection - flange, stroke 24 mm (30 mm with AMV613-Y60), gray cast iron EN-GJL-250 (GG-25)

VFG2 PN16 DN250 kvs 400 control valve two-hole working temperature 2+140 °C connection - flange, stroke 24 mm (30 mm with AMV613-Y60), gray cast iron EN-GJL-250 (GG-25)

VFG2 PN25 DN15 kvs 4 regulating valve two-hole working temperature 2+200 °C connection - flange, stroke 6 mm, wrought iron EN-GJS-400-18-LT (GGG-40.3)

VFG2 PN25 DN20 kvs 6.3 regulating valve two-hole working temperature 2+200 °C connection - flange, stroke 6 mm, malleable cast iron EN-GJS-400-18-LT (GGG-40.3)

VFG2 PN25 DN25 kvs 8 regulating valve two-hole working temperature 2+200 °C connection - flange, stroke 6 mm, wrought iron EN-GJS-400-18-LT (GGG-40.3)

VFG2 PN25 DN32 kvs 16 regulating valve two-hole working temperature 2+200 °C connection - flange, stroke 8 mm, malleable cast iron EN-GJS-400-18-LT (GGG-40.3)

VFG2 PN25 DN40 kvs 20 regulating valve two-hole working temperature 2+200 °C connection - flange, stroke 8 mm, malleable cast iron EN-GJS-400-18-LT (GGG-40.3)

VFG2 PN25 DN50 kvs 32 regulating valve two-hole working temperature 2+200 °C connection - flange, stroke 12, malleable cast iron EN-GJS-400-18-LT (GGG-40.3)

VFG2 PN25 DN65 kvs 50 regulating valve two-hole working temperature 2+200 °C connection - flange, stroke 12, malleable cast iron EN-GJS-400-18-LT (GGG-40.3)

VFG2 PN25 DN80 kvs 80 control valve two ports working temperature 2+200 °C connection - flange, stroke 18 mm, wrought iron EN-GJS-400-18-LT (GGG-40.3)

VFG2 PN25 DN100 kvs 125 regulating valve two-hole working temperature 2+200 °C connection - flange, stroke 20 mm, wrought iron EN-GJS-400-18-LT (GGG-40.3)

VFG2 PN25 DN125 kvs 160 control valve two-hole working temperature 2+200 °C connection - flange, stroke 20 mm, wrought iron EN-GJS-400-18-LT (GGG-40.3)

VFGS2 PN16 DN15 kvs 4 control valve two ports working temperature 2+200 °C (350 °C with accessories) connection - flange, stroke 6 mm, gray cast iron EN-GJL-250 (GG-25)

VFGS2 PN16 DN20 kvs 6.3 control valve two ports working temperature 2+200 °C (350 °C with accessories) connection - flange, stroke 6 mm, gray cast iron EN-GJL-250 (GG-25)

VFGS2 PN16 DN25 kvs 8 control valve two ports working temperature 2+200 °C (350 °C with accessories) connection - flange, stroke 6 mm, gray cast iron EN-GJL-250 (GG-25)

VFGS2 PN16 DN32 kvs 16 control valve two ports working temperature 2+200 °C (350 °C with accessories) connection - flange, stroke 8 mm, gray cast iron EN-GJL-250 (GG-25)

VFGS2 PN16 DN40 kvs 20 control valve two ports working temperature 2+200 °C (350 °C with accessories) connection - flange, stroke 8 mm, gray cast iron EN-GJL-250 (GG-25)

VFGS2 PN16 DN50 kvs 32 control valve two ports working temperature 2+200°C (350°C with accessories) connection - flange, stroke 12, gray cast iron EN-GJL-250 (GG-25)

VFGS2 PN16 DN65 kvs 50 control valve two ports working temperature 2+200 °C (350 °C with accessories) connection - flange, stroke 12, gray cast iron EN-GJL-250 (GG-25)

VFGS2 PN16 DN80 kvs 80 control valve two ports working temperature 2+200 °C (350 °C with accessories) connection - flange, stroke 18 mm, gray cast iron EN-GJL-250 (GG-25)

VFGS2 PN16 DN100 kvs 125 control valve two ports working temperature 2+200 °C (350 °C with accessories) connection - flange, stroke 20 mm, gray cast iron EN-GJL-250 (GG-25)

VFGS2 PN16 DN125 kvs 160 control valve two ports working temperature 2+200 °C (300 °C with accessories) connection - flange, stroke 20 mm, gray cast iron EN-GJL-250 (GG-25)

VFGS2 PN16 DN150 kvs 280 control valve two ports working temperature 2+200 °C (300 °C with accessories) connection - flange, stroke 24 mm (30 mm with AMV613-Y60), gray cast iron EN-GJL-250 (GG-25 )

VFGS2 PN25 DN15 kvs 4 regulating valve two-hole working temperature 2+200 °C (350 °C with accessories) connection - flange, stroke 6 mm, malleable cast iron EN-GJS-400-18-LT (GGG-40.3)

VFGS2 PN25 DN20 kvs 6.3 control valve two ports working temperature 2+200 °C (350 °C with accessories) connection - flange, stroke 6 mm, malleable cast iron EN-GJS-400-18-LT (GGG-40.3)

VFGS2 PN25 DN25 kvs 8 control valve two ports working temperature 2+200 °C (350 °C with accessories) connection - flange, stroke 6 mm, malleable cast iron EN-GJS-400-18-LT (GGG-40.3)

VFGS2 PN25 DN32 kvs 16 regulating valve two-hole working temperature 2+200 °C (350 °C with accessories) connection - flange, stroke 8 mm, malleable cast iron EN-GJS-400-18-LT (GGG-40.3)

VFGS2 PN25 DN40 kvs 20 control valve two ports working temperature 2+200 °C (350 °C with accessories) connection - flange, stroke 8 mm, malleable cast iron EN-GJS-400-18-LT (GGG-40.3)

VFGS2 PN25 DN50 kvs 32 control valve two ports working temperature 2+200 °C (350 °C with accessories) connection - flange, stroke 12, malleable cast iron EN-GJS-400-18-LT (GGG-40.3)

VFGS2 PN25 DN65 kvs 50 control valve two ports working temperature 2+200 °C (350 °C with accessories) connection - flange, stroke 12, malleable cast iron EN-GJS-400-18-LT (GGG-40.3)

VFGS2 PN25 DN80 kvs 80 control valve two ports working temperature 2+200 °C (350 °C with accessories) connection - flange, stroke 18 mm, wrought iron EN-GJS-400-18-LT (GGG-40.3)

VFGS2 PN25 DN100 kvs 125 control valve two ports working temperature 2+200 °C (350 °C with accessories) connection - flange, stroke 20 mm, wrought iron EN-GJS-400-18-LT (GGG-40.3)

VFGS2 PN25 DN125 kvs 160 control valve two ports working temperature 2+200 °C (350 °C with accessories) connection - flange, stroke 20 mm, wrought iron EN-GJS-400-18-LT (GGG-40.3)

VMV PN16 DN15 kvs 2.5 control valve three-hole RAV type connection working temperature 2+120°C connection - internal thread, Rp½, stroke 2 mm, red bronze - Rg5

VMV PN16 DN20 kvs 4 control valve three holes RAV type connection working temperature 2+120°C connection - internal thread, Rp¾, stroke 2.1 mm, red bronze - Rg5

VMV PN16 DN25 kvs 6.3 control valve three holes RAV type connection working temperature 2+120°C connection - internal thread, Rp1, stroke 2.6 mm, red bronze - Rg5

VG2 PN25 DN32 kvs 12.5 control valve two-hole working temperature 2+150°C connection - external thread, G1¾, stroke 10 mm, wrought iron EN-GJS-400-18-LT (GGG-40.3)

VG2 PN25 DN40 kvs 16 control valve two-hole working temperature 2+150°C connection - external thread, G2, stroke 10 mm, wrought iron EN-GJS-400-18-LT (GGG-40.3)

VG2 PN25 DN50 kvs 20 control valve two-hole working temperature 2+150°C connection - flanged G2½, stroke 10 mm, wrought iron EN-GJS-400-18-LT (GGG-40.3)

VGF2 PN25 DN32 kvs 12.5 regulating valve two-hole working temperature 2+150°C connection - flange, stroke 10 mm, wrought iron EN-GJS-400-18-LT (GGG-40.3)

VGF2 PN25 DN50 kvs 25 regulating valve two-hole working temperature 2+150°C connection - flange, stroke 10 mm, wrought iron EN-GJS-400-18-LT (GGG-40.3)

AVQM PN16 DN15 kvs 0.4 control valve two-hole control limits 0.015-0.18 m3/h working temperature 2+150°C connection - external thread, G¾, stroke 5 mm, red bronze - Rg5

AVQM PN16 DN15 kvs 1 regulating valve two-hole regulation limits 0.02-0.4 m3/h working temperature 2+150°C connection - external thread, G¾, stroke 5 mm, red bronze - Rg5

AVQM PN16 DN15 kvs 1.6 regulating valve two-hole regulation limits 0.03-0.86 (0.9) m3/h working temperature 2+150°C connection - external thread, G¾, stroke 5 mm, red bronze - Rg5

AVQM PN16 DN15 kvs 2.5 regulating valve two-hole regulation limits 0.07-1.4 (1.6) m3/h working temperature 2+150°C connection - external thread, G¾, stroke 5 mm, red bronze - Rg5

AVQM PN16 DN15 kvs 4 regulating valve two-hole regulation limits 0.07-2.2 (2.4) m3/h working temperature 2+150°C connection - external thread, G¾, stroke 5 mm, red bronze - Rg5

AVQM PN16 DN20 kvs 6.3 control valve two-hole control limits 0.16-3 (3.5) m3/h working temperature 2+150°C connection - external thread, G1, stroke 7 mm, red bronze - Rg5

AVQM PN16 DN25 kvs 8 control valve two-hole adjustment limits 0.2-3.5 (4.5) m3/h working temperature 2+150°C connection - external thread, G1¼, stroke 7 mm, red bronze - Rg5

AVQM PN16 DN32 kvs 10 control valve two-hole control limits 0.16-5.5 (6) m3/h working temperature 2+150°C connection - external thread, G1¾, stroke 10 mm, red bronze - Rg5

AVQM PN25 DN15 kvs 0.4 control valve control limits Qmin 0.015 Qnom 0.18 m3/h working temperature 2+150°C connection - external thread, G¾, stroke 5 mm, red bronze - Rg5

AVQM PN25 DN15 kvs 1 control valve control limits Qmin 0.02 Qnom 0.4 m3/h working temperature 2+150°C connection - external thread, G¾, stroke 5 mm, red bronze - Rg5

AVQM PN25 DN15 kvs 1.6 control valve control limits Qmin 0.03 Qnom 0.86 Qmax 0.9 m3/h working temperature 2+150°C connection - external thread, G¾, stroke 5 mm, red bronze - Rg5

AVQM PN25 DN15 kvs 2.5 control valve control limits Qmin 0.07 Qnom 1.4 Qmax 1.6 m3/h working temperature 2+150°C connection - external thread, G¾, stroke 5 mm, red bronze - Rg5

AVQM PN25 DN15 kvs 4 control valve control limits Qmin 0.07 Qnom 2.2 Qmax 2.4 m3/h working temperature 2+150°C connection - external thread, G¾, stroke 5 mm, red bronze - Rg5

AVQM PN25 DN20 kvs 6.3 control valve control limits Qmin 0.16 Qnom 3 Qmax 3.5 m3/h working temperature 2+150°C connection - external thread, G1, stroke 7 mm, red bronze - Rg5

AVQM PN25 DN25 kvs 8 control valve control limits Qmin 0.2 Qnom 3.5 Qmax 4.5 m3/h working temperature 2+150°C connection - external thread, G1¼, stroke 7 mm, red bronze - Rg5

AVQM PN25 DN32 kvs 12.5 control valve control limits Qmin 0.4 Qnom 8 Qmax 10 m3/h working temperature 2+150°C connection - external thread, G1¾, stroke 10 mm, malleable cast iron EN-GJS-400-18- EN (GGG-40.3)

AVQM PN25 DN40 kvs 16 control valve control limits Qmin 0.8 Qnom 10 Qmax 12 m3/h working temperature 2+150°C connection - external thread, G2, stroke 10 mm, malleable cast iron EN-GJS-400-18-LT ( GGG-40.3)

AVQM PN25 DN50 kvs 20 control valve control limits Qmin 0.8 Qnom 12 Qmax 15 m3/h working temperature 2+150°C connection - external thread, G2½, stroke 10 mm, malleable cast iron EN-GJS-400-18-LT ( GGG-40.3)

AVQM PN25 DN32 kvs 12.5 control valve control limits Qmin 0.4 Qnom 8 Qmax 10 m3/h working temperature 2+150°C connection - flange, stroke 10 mm, malleable cast iron EN-GJS-400-18-LT (GGG -40.3)

AVQM PN25 DN40 kvs 20 control valve control limits Qmin 0.8 Qnom 10 Qmax 12 m3/h working temperature 2+150°C connection - flange, stroke 10 mm, malleable cast iron EN-GJS-400-18-LT (GGG-40.3 )

AVQM PN25 DN50 kvs 25 control valve control limits Qmin 0.8 Qnom 12 Qmax 15 m3/h working temperature 2+150°C connection - flange, stroke 10 mm, malleable cast iron EN-GJS-400-18-LT (GGG-40.3 )

AMV55 gear reverse ~230V 2000N three-position control signal, no position signal, with mechanical manual control, IP54 connection with valve - clamp, stroke 40 mm, speed 8s/mm

AME55 gear reverse ~24V 2000N control uniform 0(2)-10V; 0(4)...20 mA position signal 0(2)-10V with mechanical manual control, IP54 connection with valve - clamp, stroke 40 mm, speed 8s/mm

VFS2 PN25 DN15 kvs 4 regulating valve two-hole working temperature (-10)+200°C connection - flange, stroke 15 mm, wrought iron EN-GJS-400-18-LT (GGG-40.3)

VFS2 PN25 DN20 kvs 6.3 control valve two-hole working temperature (-10)+200°C connection - flange, stroke 15 mm, wrought iron EN-GJS-400-18-LT (GGG-40.3)

VFS2 PN25 DN25 kvs 10 control valve two-hole working temperature (-10)+200°C connection - flange, stroke 15 mm, wrought iron EN-GJS-400-18-LT (GGG-40.3)

VFS2 PN25 DN32 kvs 16 control valve two-hole working temperature (-10)+200°C connection - flange, stroke 15 mm, wrought iron EN-GJS-400-18-LT (GGG-40.3)

VFS2 PN25 DN40 kvs 25 regulating valve two-hole working temperature (-10)+200°C connection - flange, stroke 15 mm, wrought iron EN-GJS-400-18-LT (GGG-40.3)

VFS2 PN25 DN50 kvs 40 control valve two-hole working temperature (-10)+200°C connection - flange, stroke 15 mm, wrought iron EN-GJS-400-18-LT (GGG-40.3)

VFS2 PN25 DN65 kvs 63 control valve two-hole working temperature (-10)+200°C connection - flange, stroke 40 mm, wrought iron EN-GJS-400-18-LT (GGG-40.3)

VFS2 PN25 DN80 kvs 100 regulating valve two-hole working temperature (-10)+200°C connection - flange, stroke 40 mm, wrought iron EN-GJS-400-18-LT (GGG-40.3)

VFS2 PN25 DN100 kvs 145 control valve two-hole working temperature (-10)+200°C connection - flange, stroke 40 mm, wrought iron EN-GJS-400-18-LT (GGG-40.3)

VFM2 PN25 DN65 kvs 63 control valve two-hole working temperature (-10)+150°C connection - flange, stroke 30 mm, wrought iron EN-GJS-400-18-LT (GGG-40.3)

VFM2 PN25 DN80 kvs 100 regulating valve two-hole working temperature (-10)+150°C connection - flange, stroke 34 mm, wrought iron EN-GJS-400-18-LT (GGG-40.3)

VFM2 PN25 DN100 kvs 160 control valve two-hole working temperature (-10)+150°C connection - flange, stroke 40 mm, wrought iron EN-GJS-400-18-LT (GGG-40.3)

VFM2 PN25 DN125 kvs 250 control valve two-hole working temperature (-10)+150°C connection - flange, stroke 40 mm, wrought iron EN-GJS-400-18-LT (GGG-40.3)

VFM2 PN25 DN150 kvs 400 regulating valve two-hole working temperature (-10)+150°C connection - flange, stroke 40 mm, wrought iron EN-GJS-400-18-LT (GGG-40.3)

VFM2 PN25 DN200 kvs 630 control valve two-hole working temperature (-10)+150°C connection - flange, stroke 50 mm, wrought iron EN-GJS-400-18-LT (GGG-40.3)

VFM2 PN25 DN250 kvs 900 regulating valve two-hole working temperature (-10)+150°C connection - flange, stroke 50 mm, wrought iron EN-GJS-400-18-LT (GGG-40.3)

VF3 PN16 DN100 kvs 145 regulating valve three-hole working temperature (-10)+130°C connection - flange, stroke 30 mm, gray cast iron EN-GJL-250 (GG-25)

VF3 PN16 DN125 kvs 220 regulating valve three-hole working temperature (-10)+200°C connection - flange, stroke 40 mm, wrought iron EN-GJS-400-18-LT (GGG-40.3)

VF3 PN16 DN150 kvs 320 control valve three-hole working temperature (-10)+200°C connection - flange, stroke 40 mm, wrought iron EN-GJS-400-18-LT (GGG-40.3)

VF3 PN16 DN20 kvs 6.3 regulating valve three-hole working temperature (-10)+130°C connection - flange, stroke 10 mm, gray cast iron EN-GJL-250 (GG-25)

VF3 PN16 DN80 kvs 100 regulating valve three ports working temperature (-10)+130°C connection - flanged, stroke 20 mm, gray cast iron EN-GJL-250 (GG-25)

VF3 PN16 DN200 kvs 630 control valve three-hole control characteristic working temperature (-10)+130°C connection - flange, stroke 70 mm, gray cast iron EN-GJL-250 (GG-25)

VF3 PN16 DN250 kvs 1000 regulating valve three-hole regulating characteristic working temperature (-10)+130°C connection - flange, stroke 70 mm, gray cast iron EN-GJL-250 (GG-25)

VF3 PN16 DN300 kvs 1250 control valve three-hole control characteristic working temperature (-10)+130°C connection - flange, stroke 80 mm, gray cast iron EN-GJL-250 (GG-25)

VL3 PN6 DN80 kvs 100 regulating valve three ports working temperature (-10)+130°C connection - flange, stroke 20 mm, gray cast iron EN-GJL-250 (GG-25)

VF2 PN16 DN100 kvs 145 regulating valve two-hole working temperature (-10)+130°C connection - flange, stroke 40 mm, wrought iron EN-GJS-400-18-LT (GGG-40.3)

VF2 PN16 DN125 kvs 220 regulating valve two-hole working temperature (-10)+200°C connection - flange, stroke 40 mm, wrought iron EN-GJS-400-18-LT (GGG-40.3)

VF2 PN16 DN150 kvs 320 control valve two-hole working temperature (-10)+200°C connection - flange, stroke 40 mm, wrought iron EN-GJS-400-18-LT (GGG-40.3)

AME130 gear reverse ~24V 200N control uniform 0(2)-10V; 0(4)...20 mA no position signal, with mechanical manual control, working temperature 2+55°C IP54 connection with valve - thread M30, stroke 5 mm, speed 24s/mm

AME130H gear reverse ~24V 200N control uniform 0(2)-10V; 0(4)...20 mA no position signal, with mechanical manual control, working temperature 2+55°C IP54 connection with valve - thread M30, stroke 5 mm, speed 24s/mm

AMV13 SD drive reverse without mechanical manual control with safety function 2+55°C ~230V 300N consumption 7VA control signal three-position, no position signal, IP54 M30, stroke 5 mm, 14s/mm

AMV150 gear reverse ~230V 250N three-position control signal, no position signal, with mechanical manual control, working temperature 2+55°C IP54 connection with valve - thread M30, stroke 4 mm, speed 24s/mm

AME10 gear reverse ~24V 300N control uniform 0(2)-10V; 0(4)...20 mA position signal 0(2)-10V with mechanical manual control, working temperature 2+55°C IP54 connection with valve - thread M30, stroke 5 mm, speed 14s/mm

AMV20 gear reverse ~230V 450N three-position control signal, no position signal, with mechanical manual control, working temperature 2+55°C IP54 connection with valve - thread M30, stroke 10 mm, speed 14s/mm

AME20 gear reverse ~24V 450N control uniform 0(2)-10V; 0(4)...20 mA position signal 0(2)-10V with mechanical manual control, working temperature 2+55°C IP54 connection with valve - thread M30, stroke 10 mm, speed 14s/mm

AMV30 gear reverse ~230V 450N control signal three-position, no position signal, with mechanical manual control, working temperature 2+55°C IP54 connection with valve - thread M30, stroke 10 mm, speed 3s/mm

AME30 gear reverse ~24V 450N control uniform 0(2)-10V; 0(4)...20 mA position signal 0(2)-10V with mechanical manual control, working temperature 2+55°C IP54 connection with valve - thread M30, stroke 10 mm, speed 3s/mm

AMV23SD gear reverse ~230V 450N control signal three-position, no position signal, without mechanical manual control with safety function working temperature 2+55°C IP54 connection with valve - thread M30, stroke 10 mm, speed 14s/mm

AME140 gear reverse ~24V 200N control uniform 0(2)-10V; 0(4)...20 mA no position signal, with mechanical manual control, working temperature 2+55°C IP54 connection with valve - thread M30, stroke 5 mm, speed 12s/mm

AME140H gear reverse ~24V 200N control uniform 0(2)-10V; 0(4)...20 mA no position signal, with mechanical manual control, working temperature 2+55°C IP54 connection with valve - thread M30, stroke 5 mm, speed 12s/mm

AMV33 SD gear reverse ~230V 450N control signal three-position, no position signal, without mechanical manual control with safety function working temperature 2+55°C IP54 connection with valve - thread M30, stroke 10 mm, speed 3s/mm

AME438SU drive reverse ~24V 450N control uniform 0(2)-10V; 0(4)...20 mA position signal 0(2)-10V with mechanical manual control, working temperature 2+55°C IP54 connection with valve - clamp, stroke 15 mm, speed 15s/mm

AMV438 SU drive reverse ~230V 450N control signal three-position, no position signal, without mechanical manual control with safety function working temperature 2+55°C IP54 connection with valve - clamp, stroke 15 mm, speed 15s/mm

HRE3 PN6 DN20 kvs 6.3 control valve three ports working temperature 2+110 °C connection - internal thread, Rp¾, stroke 90°, gray cast iron EN-GJL-250 (GG-25)

HRE3 PN6 DN25 kvs 10 control valve three-hole working temperature 2+110 °C connection - internal thread, Rp1, stroke 90°, gray cast iron EN-GJL-250 (GG-25)

HRE3 PN6 DN32 kvs 16 control valve three-hole working temperature 2+110 °C connection - internal thread, Rp1¼, stroke 90°, gray cast iron EN-GJL-250 (GG-25)

HRE3 PN6 DN40 kvs 25 control valve three ports working temperature 2+110 °C connection - internal thread, Rp1½, stroke 90°, gray cast iron EN-GJL-250 (GG-25)

HRE3 PN6 DN50 kvs 40 control valve three ports working temperature 2+110 °C connection - internal thread, Rp2, stroke 90°, gray cast iron EN-GJL-250 (GG-25)

HRE4 PN6 DN20 kvs 6.3 control valve four holes working temperature 2+110 °C connection - internal thread, Rp¾, stroke 90°, gray cast iron EN-GJL-250 (GG-25)

HRE4 PN6 DN25 kvs 10 control valve four ports working temperature 2+110 °C connection - internal thread, Rp1, stroke 90°, gray cast iron EN-GJL-250 (GG-25)

HRE4 PN6 DN32 kvs 16 control valve four ports working temperature 2+110 °C connection - internal thread, Rp1¼, stroke 90°, gray cast iron EN-GJL-250 (GG-25)

HRE4 PN6 DN40 kvs 25 control valve four ports working temperature 2+110 °C connection - internal thread, Rp1½, stroke 90°, gray cast iron EN-GJL-250 (GG-25)

HRE4 PN6 DN50 kvs 40 control valve four ports working temperature 2+110 °C connection - internal thread, Rp2, stroke 90°, gray cast iron EN-GJL-250 (GG-25)

VRG2 PN16 DN15 kvs 0.63 control valve two-hole working temperature (-10)+130°C connection - external thread, G1, stroke 10 mm, gray cast iron EN-GJL-250 (GG-25)

VRG2 PN16 DN15 kvs 1 regulating valve two-hole working temperature (-10)+130°C connection - external thread, G1, stroke 10 mm, gray cast iron EN-GJL-250 (GG-25)

VRG2 PN16 DN15 kvs 1.6 control valve two-hole working temperature (-10)+130°C connection - external thread, G1, stroke 10 mm, gray cast iron EN-GJL-250 (GG-25)

VRG2 PN16 DN15 kvs 2.5 control valve two-hole working temperature (-10)+130°C connection - external thread, G1, stroke 10 mm, gray cast iron EN-GJL-250 (GG-25)

VRG2 PN16 DN15 kvs 4 control valve two-hole working temperature (-10)+130°C connection - external thread, G1, stroke 10 mm, gray cast iron EN-GJL-250 (GG-25)

VRG2 PN16 DN20 kvs 6.3 control valve two-hole working temperature (-10)+130°C connection - external thread, G1¼, stroke 10 mm, gray cast iron EN-GJL-250 (GG-25)

VRG2 PN16 DN25 kvs 10 control valve two-hole working temperature (-10)+130°C connection - external thread, G1½, stroke 10 mm, gray cast iron EN-GJL-250 (GG-25)

VRG2 PN16 DN32 kvs 16 regulating valve two-hole working temperature (-10)+130°C connection - external thread, G2, stroke 15 mm, gray cast iron EN-GJL-250 (GG-25)

VRG2 PN16 DN40 kvs 25 control valve two-hole working temperature (-10)+130°C connection - external thread, G2¼, stroke 15 mm, gray cast iron EN-GJL-250 (GG-25)

VRG2 PN16 DN50 kvs 40 control valve two-hole working temperature (-10)+130°C connection - external thread, G2¾, stroke 15 mm, gray cast iron EN-GJL-250 (GG-25)

VRG3 PN16 DN15 kvs 0.63 control valve three-hole working temperature (-10)+130°C connection - external thread, G1, stroke 10 mm, gray cast iron EN-GJL-250 (GG-25)

VRG3 PN16 DN15 kvs 1 regulating valve three-hole working temperature (-10)+130°C connection - external thread, G1, stroke 10 mm, gray cast iron EN-GJL-250 (GG-25)

VRG3 PN16 DN15 kvs 1.6 control valve three-hole working temperature (-10)+130°C connection - external thread, G1, stroke 10 mm, gray cast iron EN-GJL-250 (GG-25)

VRG3 PN16 DN15 kvs 2.5 regulating valve three-hole working temperature (-10)+130°C connection - external thread, G1, stroke 10 mm, gray cast iron EN-GJL-250 (GG-25)

VRG3 PN16 DN15 kvs 4 control valve three-hole working temperature (-10)+130°C connection - external thread, G1, stroke 10 mm, gray cast iron EN-GJL-250 (GG-25)

VRG3 PN16 DN20 kvs 6.3 control valve three-hole working temperature (-10)+130°C connection - external thread, G1¼, stroke 10 mm, gray cast iron EN-GJL-250 (GG-25)

VRG3 PN16 DN25 kvs 10 control valve three-hole working temperature (-10)+130°C connection - external thread, G1½, stroke 10 mm, gray cast iron EN-GJL-250 (GG-25)

VRG3 PN16 DN32 kvs 16 control valve three-hole working temperature (-10)+130°C connection - external thread, G2, stroke 15 mm, gray cast iron EN-GJL-250 (GG-25)

VRG3 PN16 DN40 kvs 25 control valve three-hole working temperature (-10)+130°C connection - external thread, G2¼, stroke 15 mm, gray cast iron EN-GJL-250 (GG-25)

VRG3 PN16 DN50 kvs 40 control valve three-hole working temperature (-10)+130°C connection - external thread, G2¾, stroke 15 mm, gray cast iron EN-GJL-250 (GG-25)

VB2 PN25 DN15 kvs 0.25 control valve two-hole working temperature 2+150°C connection - flange, stroke 5 mm, malleable cast iron EN-GJS-400-18-LT (GGG-40.3)

VB2 PN25 DN15 kvs 0.4 regulating valve two-hole working temperature 2+150°C connection - flange, stroke 5 mm, malleable cast iron EN-GJS-400-18-LT (GGG-40.3)

VB2 PN25 DN15 kvs 0.63 control valve two-hole working temperature 2+150°C connection - flange, stroke 5 mm, malleable cast iron EN-GJS-400-18-LT (GGG-40.3)

VB2 PN25 DN15 kvs 1.6 regulating valve two-hole working temperature 2+150°C connection - flange, stroke 5 mm, wrought iron EN-GJS-400-18-LT (GGG-40.3)

VB2 PN25 DN15 kvs 2.5 regulating valve two-hole working temperature 2+150°C connection - flange, stroke 5 mm, malleable cast iron EN-GJS-400-18-LT (GGG-40.3)

VB2 PN25 DN20 kvs 6.3 regulating valve two-hole working temperature 2+150°C connection - flange, stroke 5 mm, malleable cast iron EN-GJS-400-18-LT (GGG-40.3)

VB2 PN25 DN40 kvs 25 regulating valve two-hole working temperature 2+150°C connection - flange, stroke 10 mm, wrought iron EN-GJS-400-18-LT (GGG-40.3)

VB2 PN25 DN50 kvs 40 regulating valve two-hole working temperature 2+150°C connection - flange, stroke 10 mm, wrought iron EN-GJS-400-18-LT (GGG-40.3)

NVD895 PN16 DN50 kvs 35.7 check valve medium - water or glycol mixture 50% (-10)+100°C connection - inter-flange mounted horizontally or vertically gray cast iron EN-GJL-250 (GG-25)

NVD895 PN16 DN65 kvs 64.7 non-return valve medium - water or glycol mixture 50% (-10)+100°C connection - inter-flange mounted horizontally or vertically gray cast iron EN-GJL-250 (GG-25)

NVD895 PN16 DN80 kvs 116.1 non-return valve medium - water or glycol mixture 50% (-10)+100°C connection - inter-flange mounted horizontally or vertically gray cast iron EN-GJL-250 (GG-25)

NVD895 PN16 DN100 kvs 253.3 non-return valve medium - water or glycol mixture 50% (-10)+100°C connection - inter-flange mounted horizontally or vertically gray cast iron EN-GJL-250 (GG-25)

NVD895 PN16 DN125 kvs 481.8 non-return valve medium - water or glycol mixture 50% (-10)+100°C connection - inter-flange mounted horizontally or vertically gray cast iron EN-GJL-250 (GG-25)

NVD895 PN16 DN150 kvs 698.4 non-return valve medium - water or glycol mixture 50% (-10)+100°C connection - inter-flange mounted horizontally or vertically gray cast iron EN-GJL-250 (GG-25)

NVD895 PN16 DN200 kvs 1345.5 non-return valve medium - water or glycol mixture 50% (-10)+100°C connection - inter-flange mounted horizontally or vertically cast iron EN-GJS-400.15 (GGG-40.3)

NVD895 PN16 DN250 kvs 2249.5 check valve medium - water or glycol mixture 50% (-10)+100°C connection - inter-flange mounted horizontally or vertically cast iron EN-GJS-400.15 (GGG-40.3)

NVD895 PN16 DN300 kvs 3098 check valve medium - water or glycol mixture 50% (-10)+100°C connection - inter-flange mounted horizontally or vertically cast iron EN-GJS-400.15 (GGG-40.3)

NVD895 PN16 DN400 kvs 5867 non-return valve medium - water or glycol mixture 50% (-10)+100°C connection - inter-flange mounted horizontally or vertically cast iron EN-GJS-400.15 (GGG-40.3)

NVD805 PN16 DN50 kvs 39.4 check valve medium - water or glycol mixture 50% (-10)+100°C connection - inter-flange mounted horizontally or vertically gray cast iron EN-GJL-250 (GG-25)

NVD805 PN16 DN65 kvs 83 non-return valve medium - water or glycol mixture 50% (-10)+100°C connection - flange mounted horizontally or vertically gray cast iron EN-GJL-250 (GG-25)

NVD805 PN16 DN80 kvs 138 non-return valve medium - water or glycol mixture 50% (-10)+100°C connection - flange mounted horizontally or vertically gray cast iron EN-GJL-250 (GG-25)

NVD805 PN16 DN100 kvs 250 non-return valve medium - water or glycol mixture 50% (-10)+100°C connection - flange mounted horizontally or vertically gray cast iron EN-GJL-250 (GG-25)

NVD805 PN16 DN125 kvs 505 non-return valve medium - water or glycol mixture 50% (-10)+100°C connection - flange mounted horizontally or vertically gray cast iron EN-GJL-250 (GG-25)

NVD805 PN16 DN150 kvs 891 non-return valve medium - water or glycol mixture 50% (-10)+100°C connection - inter-flange mounted horizontally or vertically gray cast iron EN-GJL-250 (GG-25)

NVD805 PN16 DN200 kvs 1510 non-return valve medium - water or glycol mixture 50% (-10)+100°C connection - inter-flange mounted horizontally or vertically cast iron EN-GJS-400.15 (GGG-40.3)

NVD805 PN16 DN250 kvs 2746 check valve medium - water or glycol mixture 50% (-10)+100°C connection - inter-flange mounted horizontally or vertically cast iron EN-GJS-400.15 (GGG-40.3)

NVD805 PN16 DN300 kvs 3936 non-return valve medium - water or glycol mixture 50% (-10)+100°C connection - inter-flange mounted horizontally or vertically cast iron EN-GJS-400.15 (GGG-40.3)

NVD805 PN16 DN350 kvs 4254 non-return valve medium - water or glycol mixture 50% (-10)+100°C connection - flange mounted horizontally or vertically gray cast iron EN-GJL-250 (GG-25)

NVD805 PN16 DN400 kvs 5000 non-return valve medium - water or glycol mixture 50% (-10)+100°C connection - inter-flange mounted horizontally or vertically cast iron EN-GJS-400.15 (GGG-40.3)

NVD805 PN16 DN450 kvs 6547 non-return valve medium - water or glycol mixture 50% (-10)+100°C connection - flange mounted horizontally or vertically gray cast iron EN-GJL-250 (GG-25)

NVD805 PN16 DN500 kvs 7800 non-return valve medium - water or glycol mixture 50% (-10)+100°C connection - inter-flange mounted horizontally or vertically gray cast iron EN-GJL-250 (GG-25)

NVD805 PN16 DN600 kvs 11269 check valve medium - water or glycol mixture 50% (-10)+100°C connection - inter-flange mounted horizontally or vertically cast iron EN-GJS-400.15 (GGG-40.3)

NVD812 PN40 DN15 kvs 4.24 non-return valve medium - water or glycol mixture 50% (-10)+350°C connection - inter-flange installation in all directions AISI304

NovoCon®S electric actuator for Ds10-32 mm valves, 24V AC/DC, control signal - BAC net MS/TP, Modbus RTU, 0-10V, 0(4)-20 mA, IP54, stroke 7 mm, speed 3/ 6/12/24 s/mm,

NovoCon®M electric actuator for Ds40-100 mm valves, 24V AC/DC, control signal - BAC net MS/TP, Modbus RTU, 0-10V, 0(4)-20 mA, IP54, travel 15 mm, speed 7/ 14 s/mm

ASV-P DN 15 / kvs 1.60, internal thread automatic balancing valve, maintains equal pressure difference between risers. Setting 10 kPa, 1.5 m. capillary, closing, draining.

ASV-P DN 20 / kvs 2.50, internal thread automatic balancing valve, maintains equal pressure difference between risers. Setting 10 kPa, 1.5 m. capillary, closing, draining.

ASV-PV DN 15 / kvs 1.60, internal thread automatic balancing valve, maintains equal pressure difference between risers. Setting 5-25 kPa, 1.5 m. capillary, closing, draining. Without shells

ASV-PV DN 20 / kvs 2.50, internal thread automatic balancing valve, maintains equal pressure difference between risers. Setting 5-25 kPa, 1.5 m. capillary, closing, draining. Without shells

ASV-PV DN 25 / kvs 4.00, internal thread automatic balancing valve, maintains equal pressure difference between risers. Setting 5-25 kPa, 1.5 m. capillary, closing, draining. Without shells

ASV-PV DN 32 / kvs 6.30, internal thread automatic balancing valve, maintains equal pressure difference between risers. Setting 5-25 kPa, 1.5 m. capillary, closing, draining. Without shells

ASV-PV DN 32 / kvs 6.30, internal thread automatic balancing valve, maintains equal pressure difference between risers. Setting 20-60 kPa, 1.5 m. capillary, closing, draining. Without shells

ASV-PV DN 40 / kvs 10.00, internal thread automatic balancing valve, maintains equal pressure difference between risers. Setting 20-60 kPa, 1.5 m. capillary, closing, draining. Without shells

ASV-PV DN 20 / kvs 2.50, internal thread automatic balancing valve, maintains equal pressure difference between risers. Setting 5-25 kPa, 1.5 m. capillary, closing, draining. With shells

ASV-PV DN 25 / kvs 4.00, internal thread automatic balancing valve, maintains equal pressure difference between risers. Setting 5-25 kPa, 1.5 m. capillary, closing, draining. With shells

ASV-PV DN 32 / kvs 6.30, internal thread automatic balancing valve, maintains equal pressure difference between risers. Setting 5-25 kPa, 1.5 m. capillary, closing, draining. With shells

ASV-PV DN 50 / kvs 20.00, external thread automatic balancing valve, maintains equal pressure difference between risers. Setting 20-40 kPa, 1.5 m. capillary, closing, draining.

ASV-PV DN 65 / kvs 30.00, flange connection automatic balancing valve, maintains equal pressure difference between risers. Setting 20-40 kPa, 1.5 m. capillary, closure.

ASV-PV DN 80 / kvs 48.00, flange connection automatic balancing valve, maintains equal pressure difference between risers. Setting 20-40 kPa, 1.5 m. capillary, closure.

ASV-PV DN 100 / kvs 76.00, flange connection automatic balancing valve, maintains equal pressure difference between risers. Setting 20-40 kPa, 1.5 m. capillary, closure.

ASV-PV DN 50 / kvs 20.00, external thread automatic balancing valve, maintains equal pressure difference between risers. Setting 35-75 kPa, 1.5 m. capillary, closure.

ASV-PV DN 65 / kvs 30.00, flange connection automatic balancing valve, maintains equal pressure difference between risers. Setting 35-75 kPa, 1.5 m. capillary

ASV-PV DN 80 / kvs 48.00, flange connection automatic balancing valve, maintains equal pressure difference between risers. Setting 35-75 kPa, 1.5 m. capillary

ASV-PV DN 100 / kvs 76.00, flange connection automatic balancing valve, maintains equal pressure difference between risers. Setting 35-75 kPa, 1.5 m. capillary

ASV-PV DN 50 / kvs 20.00, external thread automatic balancing valve, maintains equal pressure difference between risers. Setting 60-100 kPa, 1.5 m. capillary

ASV-PV DN 65 / kvs 30.00, flange connection automatic balancing valve, maintains equal pressure difference between risers. Setting 60-100 kPa, 1.5 m. capillary

ASV-PV DN 80 / kvs 48.00, flange connection automatic balancing valve, maintains equal pressure difference between risers. Setting 60-100 kPa, 1.5 m. capillary

ASV-PV DN 100 / kvs 76.00, flange connection automatic balancing valve, maintains equal pressure difference between risers. Setting 60-100 kPa, 1.5 m. capillary

ASV-PV DN 50 / kvs 16.00, internal thread automatic balancing valve, maintains equal pressure difference between risers. Setting 20-60 kPa, 1.5 m. capillary, closing, draining. Without shells

ASV-BD DN 20 LF / Kvs 3.00, internal thread, DZR bronze, balance valve with rotating 360° measuring nozzles, ball valve closing function, drainage. Intended for use with ASV overshoot regulators.

ASV-BD DN 20 / Kvs 6.60, internal thread DZR bronze, balance valve with rotating 360° measuring nozzles, ball valve closing function, drainage. Intended for use with ASV overshoot regulators.

ASV-BD DN 25 / Kvs 9.50, internal thread, DZR bronze, balance valve with rotating 360° measuring nozzles, ball valve closing function, drainage. Intended for use with ASV sag regulators.

ASV-BD DN 32 / Kvs 18.00, internal thread, DZR bronze, balance valve with rotating 360° measuring nozzles, ball valve closing function, drainage. Intended for use with ASV sag regulators.

ASV-BD DN 40 / Kvs 26.00, internal thread, DZR bronze, balance valve with rotating 360° measuring nozzles, ball valve closing function, drainage. Intended for use with ASV overshoot regulators.

ASV-BD DN 50 / Kvs 40.00, internal thread, DZR bronze, balance valve with rotating 360° measuring nozzles, ball valve closing function, drainage. Intended for use with ASV sag regulators.

MSV-BD 15 Balance valve with ball valve shut-off function, measuring/drainage rotating 360ºC nozzles, DN15 - 3.0, internal thread, DZR bronze and MSV-S 15 DN 15 / Kvs 3.00 internal thread, DZR bronze ball valve with drainage function

MSV-BD 20 Balance valve with ball valve shut-off function, measuring/drainage rotating nozzles 360ºC, DN 20 / Kvs 6.60, internal thread, DZR bronze and MSV-S 20 DN 20 / Kvs 5.90, internal thread, DZR bronze ball valve with drainage function

MSV-BD 25 Balance valve with ball valve shut-off function, measuring/drainage rotating 360ºC nozzles, DN 25 / Kvs 9.50, female thread, DZR bronze and MSV-S 25 DN 25 / Kvs 9.30, female thread, DZR bronze ball valve with drain function

MSV-BD 32 Balance valve with ball valve shut-off function, measuring/drainage rotating nozzles 360ºC, DN 32 / Kvs 18.00, internal thread, DZR bronze and MSV-S 32 DN 32 / Kvs 17.70, internal thread, DZR bronze ball valve with drain function

MSV-BD 40 Balance valve with ball valve shut-off function, measuring/drainage rotating 360ºC nozzles, DN 40 / Kvs 26.00, female thread, DZR bronze and MSV-S 40 DN 40 / Kvs 25.70, female thread, DZR bronze ball valve with drain function

MSV-BD 50 Balance valve with ball valve shut-off function, measuring/drainage rotating 360ºC nozzles, DN 50 / Kvs 40.00, female thread, DZR bronze and MSV-S 50 DN 50 / Kvs 41.40, female thread, DZR bronze ball valve with drain function

FHF-4 1" Adjustable underfloor heating collector, with integrated shut-off valves in supply and pre-setting thermostatic valves in return, 4+4, 2 pcs.

FHF-5 1" Adjustable underfloor heating collector, with integrated shut-off valves in supply and pre-setting thermostatic valves in return, 5+5, 2 pcs.

FHF-7 1" Adjustable underfloor heating collector, with integrated shut-off valves in the supply and preset thermostatic valves in the return, 7+7, 2 pcs.

FHF-8 1" Adjustable underfloor heating collector, with integrated shut-off valves in the supply and pre-setting thermostatic valves in the return, 8+8, 2 pcs.

FHM-C1 water mixing unit for floor heating, with UPM3 15-70 pump, with two-way thermostatic valve (temp, limits for floor contour 18-50°C), manual drain, thermometer. Connection to the collector 1", connection to the system ½". Working pressure PN10. The distance between the connecting pipes for the collector is 213mm.

SSM-3F 1" Adjustable steel underfloor heating collector, with flow meters in the supply and preset thermostatic valves in the return, 3+3, 2 pcs., drainage and manual drains, 2 pcs.

SSM-4F 1" Adjustable steel underfloor heating collector, with flow meters in the supply and preset thermostatic valves in the return, 4+4, 2 pcs., drainage and manual drains, 2 pcs.

SSM-5F 1" Adjustable steel underfloor heating collector, with flow meters in the supply and preset thermostatic valves in the return, 5+5, 2 pcs., drainage and manual drains, 2 pcs.

SSM-6F 1" Adjustable steel underfloor heating collector, with flow meters in the supply and preset thermostatic valves in the return, 6+6, 2 pcs., drainage and manual drains, 2 pcs.

SSM-7F 1" Adjustable steel underfloor heating collector, with flow meters in supply and preset thermostatic valves in return, 7+7, 2 pcs., drainage and manual drains, 2 pcs.

SSM-8F 1" Adjustable steel underfloor heating collector, with flow meters in the supply and preset thermostatic valves in the return, 8+8, 2 pcs., drainage and manual drains, 2 pcs.

SSM-9F 1" Adjustable steel underfloor heating collector, with flow meters in the supply and preset thermostatic valves in the return, 9+9, 2 pcs., drainage and manual drains, 2 pcs.

SSM-10F 1" Adjustable steel underfloor heating collector, with flow meters in the supply and preset thermostatic valves in the return, 10+10 2 pcs., drainage and manual drains, 2 pcs.

SSM-11F 1" Adjustable steel underfloor heating collector, with flow meters in the supply and preset thermostatic valves in the return, 11+11, 2 pcs., drainage and manual drains, 2 pcs.

SSM-12F 1" Adjustable steel underfloor heating collector, with flow meters in supply and preset thermostatic valves in return, 12+12, 2 pcs., drainage and manual drains, 2 pcs.

SSM-3 1" Adjustable steel underfloor heating collector, with preset thermostatic valves in the return, 3+3, 2 pcs., drainage and manual drains, 2 pcs.

SSM-4 1" Adjustable steel underfloor heating collector, with preset thermostatic valves in the return, 4+4, 2 pcs., drainage and manual drains, 2 pcs.

SSM-5 1" Adjustable steel underfloor heating collector, with preset thermostatic valves in the return, 5+5, 2 pcs., drainage and manual drains, 2 pcs.

SSM-6 1" Adjustable steel underfloor heating collector, with preset thermostatic valves in the return, 6+6, 2 pcs., drainage and manual drains, 2 pcs.

SSM-7 1" Adjustable steel underfloor heating collector, with preset thermostatic valves in the return, 7+7, 2 pcs., drainage and manual drains, 2 pcs.

SSM-8 1" Adjustable steel underfloor heating collector, with preset thermostatic valves in the return, 8+8, 2 pcs., drainage and manual drains, 2 pcs.

SSM-9 1" Adjustable steel underfloor heating collector, with preset thermostatic valves in the return, 9+9, 2 pcs., drainage and manual drains, 2 pcs.

SSM-10 1" Adjustable steel underfloor heating collector, with preset thermostatic valves in the return, 10+10 2 pcs., drainage and manual drains, 2 pcs.

SSM-11 1" Adjustable steel underfloor heating manifold, with preset thermostatic valves in the return, 11+11, 2 pcs., drainage and manual drains, 2 pcs.

FHF-ME2 1" adjustable underfloor heating collector 2+2, 2 pcs. Supply part of the collector with shut-off/balancing valves, return part with integrated thermostatic valves without presetting.

FHF-ME3 1" adjustable underfloor heating collector 3+3, 2 pcs. Supply part of the collector with shut-off/balancing valves, return part with integrated thermostatic valves without presetting.

FHF-ME4 1" adjustable underfloor heating collector 4+4, 2 pcs. Supply part of the collector with shut-off/balancing valves, return part with integrated thermostatic valves without presetting.

FHF-ME5 1" adjustable underfloor heating collector 5+5, 2 pcs. Supply part of the collector with shut-off/balancing valves, return part with integrated thermostatic valves without presetting.

FHF-ME6 1" adjustable underfloor heating collector 6+6, 2 pcs. Supply part of the collector with shut-off/balancing valves, return part with integrated thermostatic valves without presetting.

FHF-ME7 1" adjustable underfloor heating collector 7+7, 2 pcs. Supply part of the collector with shut-off/balancing valves, return part with integrated thermostatic valves without presetting.

FHF-ME8 1" adjustable underfloor heating collector 8+8, 2 pcs. Supply part of the collector with shut-off/balancing valves, return part with integrated thermostatic valves without presetting.

CF-DS Dew point sensor for power supply 24V AC/DC; 3mA, transformer required. The dew point sensor is installed at the bottom of the supply manifold, connected to the controllers of the Danfoss LINK HC or CF-MC systems.

SonoSafe 10 meter for heating DN15 qp0.6m³/h G¾ for 110mm return pipeline Θ: 5-95°C PN16 IP54 Pt1000 Ø5.2mm DS 1.5m battery 3.6V DC (1 AA-cell) min. 11-year-old M-Bus. Set with valve and fittings

The SFVL safety valves are backpressure dependent pressure relief valves. These are designed for protection of vessels and other components against excessive pressure. These valves are recommended as an external and internal safety relief valve in refrigeration plants.

These valves are manufactured according to strict quality demands and safety requirements for refrigeration installations, as specifi ed in many markets and comply with ASHRAE Addendum15C-2000. These valves are manufactured in accordance with the ASME Quality Control Procedures and stamped with the UV symbol. They are certifi ed by the United States National Board of Boiler & Pressure Vessel Inspectors and are stamped with the NB symbol

All relief valves come with an installation tag and cable wire. Each valve’s identifi cation tag has information regarding the catalogue number, month and year of manufacture, set pressure, inlet pipe size and capacity for AIR in units of SCFM. The tag is fastened with drive rivets for security.

Relief valves are subject to 100% factory testing through three separate test sequences to verify quality and set pressure before being factory sealed for security.

If you are looking for Danfoss USA Product Store and catalog - which enables you to purchase our products - then please select the USA Product Store button.

Pressure setting [bar]: 40, Connection type: G, Inlet connection size [in]: 3/4, Outlet connection size [in]: 1, Pressure certificate: Danfoss certificate included

Made up by 2 relief valves with crossed tank, this valve is used to block pressure to a certain setting in the 2 ports of an actuator/hydraulic motor. It’s ideal to provide protection against sudden shock pressures and to adjust different pressures in the 2 ports of an hydraulic circuit as well. Direct flange is ideal for Danfoss motors type OMS, OMP-OMR and OMT and provides a maximum safety, very low pressure drops and solid installation.