danfoss safety valve brands

Danfoss proportional valves, motorized control valves, balancing valves, ball valves, thermostatic valves, solenoid valves, and expansion valves—among others.

With the SFA 10 and DSV 10 change-over valve, Danfoss is widening its range of highly reliable safety valves designed to industrial standards. The new safety valves with their lower capacity and higher pressure range up to 65 bar provide more flexibility in system design. The SFA 10 can now be used in C02 applications on the low-pressure site as well as in low-charge ammonia systems. Furthermore, the spring housing is designed for reliability, increased lifetime, and to have no sudden reliefs below set pressure.

The Danfoss SFVL safety valves are back-pressure dependent pressure relief valves. These are designed for protection of vessels and other components against excessive pressure. These valves are recommended as an external and internal safety relief valve in refrigeration plants. These valves are manufactured according to strict quality demands and safety requirements for refrigeration installations, as specified in many markets and comply with ASHRAE Addendum15C-2000. These valves are manufactured in accordance with the ASME Quality Control Procedures and stamped with the UV symbol. They are certified by the United States National Board of Boiler & Pressure Vessel Inspectors and are stamped with the NB symbol.

DSVL valves are designed specifically for use with double safety valve systems. When used in such applications, only one safety valve can be shut off or isolated at any one time. Complete shut off of one safety valve or the other can be obtained by front seating or back seating of the valve spindle. The valves are designed to give favorable fl ow characteristics and are easy to dismantle for servicing. The valve cone is designed to ensure tight seal.

Safety valves Danfoss is of Danish origin. From the Danfoss brand, manufacturing equipment such as safety valves, solenoid valves, pressure relief valves...

Safety valve company Danfoss is a Danish valve company, Danfoss was founded in 1933, initially just a small company, until now Danfoss has grown strongly into a leading organization in the world in the work. manufactures and supplies industrial valve products on the market.

The Danfoss safety valve company operates extensively in markets around the world. With an open field of development, Danfoss products have been developed and supplied to more than 100 countries on all continents.

Danfoss also provides technologies for a number of industries such as power solutions, climate solutions, sensor solutions, compressed air solutions, fire safety.

Danfoss products are very diverse, because Danfoss" fields of activities are very diverse, popular products such as valves, faucets of all kinds, compressors, pipe equipment, accessories, engine equipment, machines pumps, heat exchangers, cylinders, pumps… In general, Danfoss offers a wide range of products to customers.

Currently, Danfoss has been popular in Vietnam market quite a lot, products such as solenoid valves, safety valves are probably the most used products.

Safety valve BSV 8 is a safety valve product line manufactured from cast iron body, stainless steel head, BSV 8 product is a product with a typical input size of ¾", typical output size is first".

Danfoss SFA 10 safety valve is a safety valve product line made from stainless steel material line, very good quality, stainless steel material has advantages to mention such as anti-corrosion, anti-rust.

This is a 10H safety valve product line that is set up with a switch valve device to install two safety valve products operating in the same system, using two 10H safety valve products.

Safety valve products SFA 15 have very good corrosion resistance, besides, this safety valve product line made from micro-stainless steel material is also resistant to dirt and deposits, so this type of safety valve This safety is capable of working in applications with high requirements for hygiene and safety. The most typical are applications in food production.

The Danfoss SFV 20 safety valve is a threaded product line, a direct acting safety valve product, which can be used for a variety of water and steam applications.

When working with refrigeration units which use liquid refrigerants such as Freon or ammonia, a pressure relief valve is a necessary component. These valves are used in both regular and industrial refrigeration systems to prevent pressure from building up too much due to excessive heat, and are often built with high-pressure settings to prevent breakage.

At Discovery Designs Refrigeration, we use only the best high-pressure relief valve manufacturers for our industrial refrigeration systems. You can rest assured your new industrial cold storage unit will operate perfectly when you work with us – call our team of professional refrigerator builders today to get a quote on your next project.

The valves we use in our industrial refrigeration systems need to perform with the highest reliability within demanding environments, and Discovery Designs Refrigeration uses only the most trusted manufacturers in the country. Companies like Danfoss, Cyrus Shank and Hantemp Controls build high-quality relief valves for industrial refrigeration applications.

We cover a broad range of categories including Hydraulics, Engines, Transmissions, Gears, Hose and Fittings, Pumps, Valves, Cylinders, Shock Absorbers, Brakes, Axles, Bearings, Filters, Electric Motors, Gauges, Forklift Parts and many more. We serve repair facilities, maintenance departments, owner-operators, manufacturers, distributors and resellers. Basically, anyone who needs parts. Our website is searchable by part number, manufacturer, description and other key words.