fmda safety valve price

1. The FMDA safety valve is the only type with the thermocouple permanently attached to it.  This means the thermocouple cannot be replaced; the entire safety valve must be replaced if the thermocouple fails.  The easiest way to identify an FMDA type safety is a ½” diameter red button on the bottom of the valve.  You must know the gas pipe size and if the pilot tube is an “in and out” or an “out only.”  An “in and out” safety valve has two threaded holes at the top of the part, one for gas for the pilot to come in and one for gas to go out.  An “out only” safety valve has just one threaded hole to connect gas for the pilot to.

2. The BASO safety valve can vary in design depending on the piece of equipment it is on, so it is important to know the brand name, model and serial number of the piece of equipment to get the correct safety valve the first time.  The easiest way to identify a BASO valve is by the 15/16” diameter red pilot button.  The thermocouple is separate from the safety.

3. The TS type safety valve is the only one that can be rebuilt.  It is similar to the FMDA and BASO types in that it has “in and out” or “out only” pilot tubing, so you must know what is in your equipment.  A rebuilt kit is available in both and it is not necessary to replace the body unless it is damaged.  The body has no moving parts in it.  The easiest way to identify the TS safety is by the 5/8” diameter red button.  The thermocouple is also separate from this safety, similar to the BASO.

If the wire leads are screwed to the top terminal block, and two tubes are coming out of the top of the valve, it is the tubing type combination safety valve.

Limitations : For products shipped internationally, please note that any manufacturer warranty may not be valid; manufacturer service options may not be available; product manuals, instructions, and safety warnings may not be in destination country languages; the products (and accompanying materials) may not be designed in accordance with destination country standards, specifications, and labeling requirements; and the products may not conform to destination country voltage and other electrical standards (requiring use of an adapter or converter if appropriate). The recipient is responsible for assuring that the product can be lawfully imported to the destination country. When ordering from Ubuy or its affiliates, the recipient is the importer of record and must comply with all laws and regulations of the destination country.

Robertshaw FMDA 48" capillary length 1/2" Commercial Gas Safety Valve. Hello new leftover surplus items. One per sale. Thank you... Genesis 1:27 (NIV) 27 So God created mankind in his own image, in the image of God he created them; male and female he created them.