futura pressure cooker safety valve quotation

The Futura Pressure Cooker has a beautiful, durable black finish given by 60 micron thick hard anodising which will not tarnish, pit or corrode. The hard anodised finish stays looking new for years and allows the pressure cooker to absorb heat faster making it more energy-efficient. The base of the Futura is 6.35 mm thick.

Futura Pressure cooker with a unique pressure regulating system which gives the convenience of finger-tip pressure release and prevents clogging of the steam vent. The Base is double thick and stays flat, it evenly distributes the heat. Suitable for gas, electric, ceramic and halogen cooktops.

Futura pressure cooking can reduce normal cooking times by as much as half. Economical foods such as legumes (lentils, dried peas and beans) and tough cuts of meat can be cooked to perfection in a fraction of the normal time. Because food cooks faster in a pressure cooker, you save fuel, and therefore money.

Scientific literature indicates that certain nutritive elements such as proteins and vitamins are better retained by pressure cooking. Steaming is ideal for low-calorie, low-fat cooking. The higher temperature while pressure cooking gives more hygienic food. Closed cooking in steam under pressure may better evoke the natural flavours of the food – producing delicious results.

cooker is opened or closed. Also, the sealing ring is not exposed to food acids in the pressure cooker due to the protection given to it by the rim of the lid.

The base stays flat and heats quickly and evenly. It is ideal for light frying before pressure cooking and for quick and economical cooking on electric, gas, ceramic and halogen stoves.

The cooker body comes fitted with a body handle screwed on to a body handle bracket attached to the cooker body. There is a short body handle(except for 2 Liter and 3 Liter models) attached to the cooker body, which helps carry the cooker when it is loaded.

The lid comes assembled with the detachable pressure regulator and sealing ring. The pressure regulator automatically maintains the cooking pressure of about 15 pounds per square inch/psi (1 kg per square cm) and can be used for pressure release by fingertip control.

The stated volume of all pressure cookers is that of the cooker body. Cooking capacity in a pressure cooker is less than its full volume. The pressure cooker body should never be filled more than two-thirds its capacity. This is to safeguard against blocking the steam vent and to leave enough space to allow steam to circulate.

To place the pressure regulator on to the steam vent if the lid is hot: hold the narrow part of the pressure regulator between thumb and middle finger; place on steam vent; press pressure regulator until it fits into position with a click.

Do not leave salted liquid, vinegar, lemon juice, mayonnaise or mustard in the cooker. Never add salt to the cooker when there is no liquid in the cooker. First add the liquid, warm it, then add the salt and stir until the salt is completely dissolved.

futura pressure cooker safety valve quotation

A Hawkins futura Pressure Cooker Safety Valve is an automatic release of a gas from a boiler, pressure vessel. Hawkins futura Pressure Cooker Safety Valve is an important part of the pressure cooker. The Alloy Composition of Hawkins futura Pressure Cooker Safety Valve shall be Such that it melts before gauge pressure is reached greater than half of the bursting pressure. Whenever we are working on a Hawkins futura Pressure Cooker, safety is one thing we should look out for. But with Hawkins, Safety is rest assured. The Hawkins futura Pressure Cooker Safety Valve contains a special fusible alloy pellet which melts when the temperature or pressure rises beyond safe levels and lets out the steam.

Pressure cooker safety valve, In the conventional system of Pressure Cooker a safety valve, made of conventional rubber or plastic with a pin, is used for release of internal pressure, in case of excessive generation of steam on failure of the Pressure regulating and release Device (Whistle). In the conventional system of pressure cooker, the safety pressure release device is non reusable and needs replacement time and again whenever the same attains its objective. The newly invented device, the safety pressure release device of pressure cooker, is permanent, reusable, needs no replacement and safe in functioning as the newly invented device and its parts are made of metal, and its safety pin is loaded with a spring, thereby resulting in economy and greater safety of pressure cooker. Pressure Cooker is kept on Heating Device its internal pressure will reach to the greatest nominal cooking pressure, Pressure Regulating Device Operates (Whistle) & allow excess steam to escape. In case if whistle won’t operate at this point due to blockage in vent & the internal Pressure exceed the greatest nominal pressure then the sealing pin will lift upwards & allow excess steam to escape and this device will work as Safety Pressure Release Device.

futura pressure cooker safety valve quotation

Futura Hawkins Safety Valve Pressure Cooker Spare Part 100 pcs imparts all the top ingredients with a bow-wow low price of 140.693$ which is a bargain. It owns many characteristics including India, model, country region of manufacture and type.

Original Futura Valve Cooker Parts Code F10-12 PCS a Safety Futura Hard Anodized is an that been in India SHIPPINGBY INDIA POST ONLY.Product be shipped 2 days after the full payment we shipped 20-25 Business days reach Buyer.

spare parts | pressure cooker steamer insert pans | maid of honor 21 qt pressure cooker manual | steamliner pressure cooker | basic essentials pressure cooker

futura pressure cooker safety valve quotation

Hold the valve and apply a small amount of food-compatible sealant or glue on the valve threads (to prevent any leakage). Push the valve into the safety valve hole from the underside of the lid and hold it in place with the left hand. Place the washer around the threads of the valve on the top surface of the lid. Place the nut (chamfered side up) on the washer and screw the nut in a clockwise direction with your fingers until tight (see Picture 4).