goetze safety valve quotation

The overflow valve is characterised by the fact that it ensures a continuous and quiet pressure reduction when used on tanks for the storage of cryogenic liquefied technical gases such as argon, oxygen, nitrogen or carbon dioxide.

The overflow valve is adjusted to a pressure below the set pressure of the safety valves and thus prevents the safety valves of the tank from reacting. When the safety valves are fully opened, loud outflow noises are generated, which in most cases also significantly exceed the Immission guide value of TA Lärm (technical instructions for protection against noise) and deprive the neighbourhood from sleep. Thus, the response of the safety valves is often interpreted as a malfunction of the storage system and leads to the activation of the emergency plan including fire brigade, police and rescue services.

Popular for use on ring mains for heating oil burners where a line pressure needs to be maintained upstream of Pressure Regulating Valves at the burner entry points. The valves are available in 3 different setting rangess, 0.2-0.8 Bar, 0.5-2.5 Bar, 2.0-12.0 Bar, and 12.0-20.0 Bar

Piston has a face-seal, therefore would not be suitable for media which dries "sticky" such as tar, as this could cause the seal to pull out or glue the valve closed. For applications with sticky substances, use our W.L.Hamilton Pressure Relief Valves

Popular for use on ring mains for heating oil burners where a line pressure needs to be maintained upstream of Pressure Regulating Valves at the burner entry points. The valves are available in 3 different setting ranges, 0.2-1.2 Bar, 1.2-3.0 Bar, 2.0-12.0 Bar, and 12.0-30.0 Bar

Piston has a face-seal, therefore would not be suitable for media which dries "sticky" such as tar, as this could cause the seal to pull out or glue the valve closed. For applications with sticky substances, use our W.L.Hamilton Pressure Relief Valves

KB Combustion is the stockist of Safety Valves in Ireland has a wide range of Goetze Fig: 645 Safety Valve Flanged Inlet in stock. Order now for express delivery.

A proven all-around valve with proportional operating characteristics and an extremely compact design. In addition to the basic version, these valves are also available for the most varied customer requirements as a gastight version or with a lifting lever.

In addition, due to its relatively large setting range per spring, it is ideally suited in cases where either a stock valve for various applications and set pressures is required or if the customer is looking for an adjustable pressure relief valve.

Safety valves made of stainless steel, angle-type with threaded connections. The benefits and applications of this series made of high-alloyed stainless steel begin, where versions made of gunmetal are at their limits. The flexibility of the various versions offer the optimal configuration for every application. In addition to the basic version the numerous sealing possibilities and materials, back-pressure compensating metal bellows and / or a gastight cap offer the necessary optional extras required to fulfill the highest safety requirements.

High performance and high capacity brass safety relief valve with a shroud providing extra safety when relieving air with liquid, granular or dust particles. Supplied with a certificate confirming set lift pressure.