herose safety valve 06388 supplier

Provided as safety device for protection against excessive pressure in stationary and moveable gas cylinders and pressure vessels. Approved for air gases, vapours and cryogenic liquefied gases incl. LNG.

Please contact us to request a price quote for Herose - 06388 17-780, or for any other model as well. We offer competitive prices, fast delivery and a wide products distribution network in the UK.

Operating instructions READ CAREFULLY BEFORE USE! RETAIN FOR FUTURE REFERENCE! © 2018 HEROSE GMBH ARMATUREN UND METALLE Elly-Heuss-Knapp-Straße 12 23843 Bad Oldesloe Germany Phone: +49 4531 509 – 0 Fax: +49 4531 509 – 120 E-mail: info@herose.com Web: www.herose.com 1st issue 1/2019 The transmission or duplication of this document and the use or communication of its content are forbidden unless expressly permitted.

Operating instructions Requirements for persons who work with the safety valve Persons could be seriously injured or killed if the safety valve is used improperly. In order to avoid accidents, all persons who work on the valve must meet the following minimum requirements: ...

See catalogue page. Lifetime The user is obligated to use Herose products for their intended purpose. In this case, a technical service life may be assumed in accordance with the underlying product standards (e.g. EN1626 for shut-off valves and EN ISO 4126-1 for safety valves).

Safety valves dimensioned  Inadequate  Re-dimension and replace the incorrectly for the plant performance safety valve. conditions; Safety valves not being used in accordance with the applicable  Change conditions. regulations; herose.com...

Safety ValvesType 06380Safety Valves, angle type, bronze, type tested TÜV-SV.749. D/GStandard safety valvewith soft valve seal, open bonnet, with lifting deviceIn- and outlet: female thread type G (BSPP) acc. to ISO 228/1Part No. 06380.X.0000with FPM valve seal for air and similar gasesWorking temperature: -10°C / +14°F (263K) up to +185°C / +365°F (458K)Part No. 06380.X.0300with PTFE valve seal for air and similar gasesand saturated steam from 2.0 up to 10.0 bar.Working temperature: -10°C / +14°F (263K) up to +185°C / +365°F (458K)Part No. 06380.X.0600with EPDM valve seal for air and similar gasesand steam from 0.2 up to 8 bar. (saturated steam only to 3 bar)Working temperature: -10°C / +14°F (263K) up to +135°C / +275°F (408K)Available options - on request only:· stainless steel spring - material 1.4571, external parts nickel platedApplications:Provided as safety device for protection against excessive pressure in gas cylinders and pressure vessels.Materials DIN EN ASTM1 Body CC491K B 62 UNS C836002 Valve seal FPM. PTFE or EPDM3 Disc CW614N B 249 UNS C385004 Stem CW614N B 249 UNS C385005 Bonnet CW614N B 249 UNS C385006 Spring 1.1200 A 2277 Lifting device CW614N B 249 UNS C385008 Closing cap CW507L B 36 UNS C26800Essential: Valves are delivered at a set pressure,therefore when ordering please confirm setpressure, medium and temperature.Standard marking acc. to Pressure EquipmentDirective 97/23/EC (PED).Type 06380Technical dataNominal size GW 1/2 3/4 1 1-1/4 1-1/2 2Orifice d 0 12 15 18 20 24 28Dimension code .X. 0400 0600 1000 1200 1400 2000Set pressure range FPM seal bar 0.2-20 0.2-20 0.2-20 0.2-20 0.2-16 0.2-16Set pressure range PTFE seal bar 0.2-20 0.5-20 0.2-20 0.4-20 0.2-16 1.0-16Set pressure range EPDM seal bar 0.2-8 0.2-8 0.2-9 0.2-9 0.2-8 0.2-8Outlet GA 1/2 3/4 1 1-1/4 1-1/2 2Height H 99 111 132 152 175 200Length L 1 25 30 36 40 48 56Length L 2 22 25 30 35 40 48Wrench size aacross flats S 1 27 32 41 50 58 70Weight ca. kg 0.24 0.40 0.70 1.07 1.65 2.65Coeff. of discharge from 3.0 bar α w 0.47 0.37 0.52 0.57 0.52 0.50Dimensions in mm.HEROSE GMBH Phone +49 4531 509-0 Fax +49 4531 509 120 info@herose.com www.herose.com Edition 2015-04