how to fix prestige cooker safety valve made in china

This website is using a security service to protect itself from online attacks. The action you just performed triggered the security solution. There are several actions that could trigger this block including submitting a certain word or phrase, a SQL command or malformed data.

how to fix prestige cooker safety valve made in china

Multi Food Processing Pressure Cooker 4L to 12L All Size High Quality Pressure Cooker All in One, Pressure Cooker Parts Pressure Valve China Manufacture

Pressure cooker valve,the float is made of stainless steel and the seal​ is made of flexible 100% food grade silicone, tasteless and non-toxic, safe for use.

The safety valve on a pressure cooker is a plug made of alloy and a soft rubber gasket. In the event that too much pressure builds up inside the cooker

Each Pressure cooker has a safety function, that is the safety valve, the early safety valve was melting plate type, now the new safety valve is all spring. When the pressure in the pot exceeds the safety limit, the safety valve will be forced by the air pressure jacking exhaust, to protect the safety of users....

No, only if we use it correctly, it is safe in our life. One of the vital things is properly using the pressure limit valve, the pressure limit valve has two kinds, one is adjustable often used in the electric pressure cooker.

1. Check the pressure limit valve and float valve, and check whether the pressure cooker can be buckled in place and whether the gasket on the cover is yellow. If there is any blockage, clean it immediately and do not use it if the mouth is not closed tightly.

When the pressure in the pot to limit the weight of the valve (or spring valve), the pressure limit valve began to reduce pressure, so as to achieve constant pressure in the pot.

how to fix prestige cooker safety valve made in china

Such a valve assembly is known from German laying-open print DOS No. 2,606,676. The pressure relief means thereof consists of a check valve which also serves as a safety valve. It has a valve housing of a resilient material which is fitted into a hole in the cover in the vicinity of the cooking valve aperture. The closure body is designed as a shaft-shaped valve body, transverses the valve opening and supports two spaced valve disks inside the cover as well as a dome-shaped head outside the cover. The head abuts against the valve opening in the pressureless state. As the pressure builds up in the pressure-cooker, however, the valve body is lifted and the upper valve disk closes off the valve opening internally so that the pressure in the cooker can build up. When the pressure becomes excessive, the upper valve disk can move outwardly through the valve opening of the valve housing. This allows steam to escape through the valve opening. The second valve disk preventing the valve body from being blown off the cooker although it does not obstruct the escape of steam. The cooking valve usually comprises a spring-loaded valve and a displaceable pressure indicator for the cooker which is located therein and is also spring-loaded. The springs press against the interior of a cap which is adapted to be screwed on to the valve housing. In the known valve assembly, the cap of the cooking valve has an asymmetrical design on the underside facing towards the cooker cover. It features a guide bevel at this location which reduces its clearance height. In the normal cooking position, the area with the maximum inner clearance height overlaps or overlies the check valve. When the cap is screwed off, the area with a minimum clearance height comes to lie above the check valve over which it can move without obstruction when the head of the check valve abuts against the outer side of the valve seat in the completely pressureless state. If the check valve has closed due to the internal build-up of pressure in the cooker, ie if the upper valve disk abuts against the valve seat, the guide bevel presses the valve body of the check valve downwardly and steam can escape through the check valve. The pressure in the cooker is relieved, whilst the person using the cooker is warned simultaneously by the sound of the escaping steam not to unscrew the cap any farther. If the valve body has been raised only slightly owing to a slight superpressure in the cooker, eg at the onset of pressure build-up, an additional stop which projects into the clearance height prevents the cap from being rotated any farther.

The known valve assembly is expensive to manufacture, since it requires a valve housing and a valve body for the pressure relief means. These parts are expensive to manufacture and to assemble. The cap of the cooking valve is also expensive to produce owing to its asymmetrical shape, and the dimensions of the guide bevel as well as the region of reduced clearance height must be kept within a narrow tolerance range: the valve body must be pressed downwardly to open the valve on the one hand, although on the othe hand this must not be so far that the valve head closes the opening externally. Another drawback is that when the cap is rotated into the open position, the stop jams the head of the valve body and this cannot return to its original position, even when the cooker is not under pressure, until the cap has been turned back somewhat. When the check valve functions as a safety valve, the valve disk cannot automatically turn back any longer due to the valve opening. The cap cannot be screwed off over the projecting valve body either. This makes it impossible to gain access to the valve body and return it to the normal position. Yet another disadvantage is that the valve body of the check valve can only be cleaned thoroughly--quite essential for proper sealing--if it has been snapped out of the valve disk. Since this is complicated and troublesome, such cleaning is frequently postponed or forgotten completely.

A valve assembly comprising a pressure relief means disposed adjacent to the cooking valve is also known from German utility model No. 7,624,730. The pressure relief means is designed as a safety valve in the form of a check valve. The cap of the cooking valve has indents on the periphery thereof. Both valves are spatially associated with one another such that the valve body can be raised adjacent to such an indent only when the cap is in certain positions. The check valve can be closed and pressure built up in the cooker only in this position. When the valve body is in the raised position, ie when pressure has built up in the cooker, the valve body in turn locks the cap of the cooking valve which cannot be rotated. Hence, the vent opening cannot be opened by adjusting the cap. This known valve assembly, which therefore does not correspond to the preamble of the present invention, is expensive to manufacture due to the design of the check valve. It is also difficult to clean, since the steam is dissipated to one side through a cavity in the cooking valve beneath the cap when the safety valve responds to excessive pressure. These cavities are difficult to reach, even after the cap has been removed. Furthermore, the valve body cannot be turned back into its original position until after the safety valve has responded and the excess pressure has been vented off. Only then can the cap be removed from the cooking valve.

The object of the present invention is to provide a valve assembly according to the preamble of the claim which is economical to manufacture, easy to clean and simple to operate in all modes of operation.

The construction of the closure body as a seal disposed on the cap makes it possible to design the vent opening in the form of a simple hole in the cover without any valve housing. Such a hole can be produced during one and the same operation as the hole for the cooking valve. It is easy to clean. The arrangement of the associated seal in the cap gives rise to a constructional design which is simple and easy to clean. This construction of the pressure relief means is made possible by the recognition that the vent opening need only be open to relieve the pressure. An open valve is unnecessary prior to a pressure build-up, since the air being heated up can escape by way of the conventional sealing rings between the pressure-cooker and the cover until the sealing ring abuts sealingly against the cover and cooker wall due to the build-up of pressure. In the pressure relief means in accordance with the invention, the co-operation of the seal and the vent opening permits steam to escape even when the cap is moved minimally towards the venting position. The pressure in the cooker decreases immediately. Moreover, the co-action of the venting opening and the seal generates a warning sound which warns the cook not to opening the cooking valve while the cooker is still under pressure. If there is no seal in the cap, no pressure will build up in the cooker at all.

The seal can advantageously consist of a material which is so resilient that it sealingly closes the vent opening at normal cooking pressure and permits pressure to be vented should it become eccessive. The pressure relief means thus functions as a safety valve as well.

In a preferred embodiment, the seal is designed in an annular shape. It is impossible to insert a ring improperly. The opening is always covered irrespectively of the angular position of the cap in the cooking position.

The annular seal advantageously has an internal diameter which is smaller than the external diameter of the cap section it surrounds. The annular seal is thus seated in the cap region in such a way that it can be neither twisted nor lost. Dirt cannot readily collect between the cap and the annular seal so that the seal does not have to be removed every time the cooker is cleaned.

FIG. 1 indicates the cover 1 of a pressure-cooker. A valve housing 2 is firmly riveted into place in the cover 1. It includes a valve seat 2a against which a valve body 3 is urged by a valve spring 4. This valve spring 4 presses against the inner side of a cap 5 overlying the entire valve assembly and designed as a cap or acorn nut. A pressure indicator 6 is displaceably mounted in the valve body 3. It is pre-biased by a pressure indicator spring 7 which presses against the valve body on the one hand and, on the other hand, against the inside of the cap 5. The cap 5 is adapted to be screwed on to the valve housing by means of a thread 8, thereby determining the tension of the valve and pressure indicator springs.

The cylindrical inner part 5b of the cap 5 forming the nut is surrounded by an annular seal 9 of a resilient material. The annular seal has an internal diameter which pre-biases it on the nut. The brim 5a of the cap extends externally to the annular seal.

The cover 1 has a hole 10 in spaced relation from the valve axis and is located between the internal and external diameters of the annular seal. It serves as a vent opening and is closed by the annular seal 9 during cooking.

FIG. 2 shows the cap 5 from the top. It features a inscribed ring 11 which indicates the setting of the cap relative to an arrow 12 on the cover (not shown).

The afore-described valve assembly functions as follows during cooking: the cap 5 is screwed down to the stop with the inscription "cooking" adjacent to the arrow 12. The valve spring as well as the pressure indicator spring are both pre-biased in this position. The annular seal 9 closes the hole 10. Steam pressure can now build up in the cooker in the known manner once the warm air has escaped between the cooker and the cover as mentioned above. The cooking pressure is chosen by regulating the supply of heat in response to the position of the pressure indicator 6. At the conclusion of cooking, the cap 5 is turned half a turn to the "venting" position. This causes the annular seal to release the hole 10, the steam can escape and the pressure is relieved. The venting is continuous and dependent on the speed of rotation.

If the pressure indicator is not observed during cooking, i.e. if the supply of heat is not turned down at the proper time, thus causing the pressure in the cooker to become excessive, the steam can escape through the hole 10. This gives off a warning whistle and deforms the annular seal 9. Should the generated steam still be excessively high, the valve body 3 is lifted off its seat 2a.

how to fix prestige cooker safety valve made in china

At present, most of pressure cookers in use remain old-fashioned pressure cooker the earliest, the safe servicing unit that does not have other except a slice safety plate on the pot cover, when reality is used, must the cooling pan body or take off pressure limiting valve and emit a steam in the pot, after making pot inside and outside air pressure balance, just can open pressure cooker cover, open pot cover else if by force, steam in the pot can be with the unexpected jack-up of pot cover, cause the injury of human body or to the damage of other article, owing to there is not reliable safe servicing unit, this situation happens occasionally.Now new national standard is put into effect, the interior pressure of pressure cooker pot was less than 5KPa when the He Hegai that more requires to uncap was not in place, at this problem, many pressure cooker manufacturers have increased the safety device of pressure cooker open and close cover successively, its basic technical scheme is all increasing a self-locking mechanism between the lower handle on the usual pressure pot, this self-locking mechanism is mainly formed by being contained in the safety valve on the pot cover and being contained in the movable guide plate in the upper handle and promoting restoring mechanism, when still having pressure in the pressure cooker, the spool of safety valve is at steam pressure effect float downward, stretch into the aperture on the movable guide plate, it can"t be moved and self-locking, thus the generation of the action of stopping to uncap by force;

The patent No. is that ZL94206278.7"s " pressure cooker use safeties " utility model patent discloses a kind of like this scheme of self-locking mechanism: by being contained in the safety valve (also can be described as latch gear) on the pot cover and being contained in the movable guide plate (push pedal) on the upper handle and promoting restoring mechanism, safety valve is made up of rubber seal seat and dress valve rod moving up and down within it, when still having pressure in the pressure cooker, the safety pole of safety valve pushes up under the steam pressure effect, stretch into the aperture in the push pedal, push pedal can"t be moved and self-locking, thus the generation of the action of stopping to uncap by force.But is pointed in 95225443.3 the patent application formerly " cover closing and opening safety device for pressure cooker " as us at application number, there be 1. automatically replying owing to spring of following defective in this scheme, so pressure cooker is when uncapping, after needing to overcome spring force with the finger push push pedal earlier, the dislocation that just can carry out next step action of uncapping; 2. its safety valve adopts rubber and seals with the face way of contact, and poor sealing performance runs vapour easily; 3. the chute complex structure on the lower handle; 4. upper handle directly is fixed on the pot cover periphery by two pieces of screws from inside to outside, and is easily loosening, and the secure fixation of upper handle, whether whether lockpin hole is aimed at be directly connected to safety valve can operate as normal.And handle arrangement complexity generally, the user is difficult to install voluntarily, just can dispatch from the factory after must integral installation good, and this has increased packing and freight again;

Our above-mentioned designed such scheme in first to file for this reason: 1. movable guide plate and promote automatic link gear between the skewed slot that restoring mechanism is designed to the movable guide plate of upper handle and lower handle, folding lid action is hand push and settling at one go additionally, and is consistent with the use of conventional pressure cooker; 2. the face seal form of improving safety valve is an O type circle seal form; 3. design special butterfly type upper handle seat, realize that the installation of upper handle is consistent with lower handle---promptly adopt traditional screw to install and fix mode from outside to inside.But find that in actual use this scheme still exists such defective: for reliably fixedly upper handle need fix with two pieces of short screws and butterfly upper handle seat, make install inconvenient; Because the O RunddichtringO is harder relatively, after being stained with rice grain, cause race vapour easily in addition.

how to fix prestige cooker safety valve made in china

-Select-AfghanistanAlbaniaAlgeriaAmerican SamoaAndorraAngolaAnguillaAntigua and BarbudaArgentinaArmeniaArubaAustraliaAustriaAzerbaijan RepublicBahamasBahrainBangladeshBarbadosBelarusBelgiumBelizeBeninBermudaBhutanBoliviaBosnia and HerzegovinaBotswanaBrazilBritish Virgin IslandsBrunei DarussalamBulgariaBurkina FasoBurundiCambodiaCameroonCanadaCape Verde IslandsCayman IslandsCentral African RepublicChadChileChinaColombiaComorosCook IslandsCosta RicaCyprusCzech RepublicCôte d"Ivoire (Ivory Coast)Democratic Republic of the CongoDenmarkDjiboutiDominicaDominican RepublicEcuadorEgyptEl SalvadorEquatorial GuineaEritreaEstoniaEthiopiaFalkland Islands (Islas Malvinas)FijiFinlandFranceFrench GuianaFrench PolynesiaGabon RepublicGambiaGeorgiaGermanyGhanaGibraltarGreeceGreenlandGrenadaGuadeloupeGuamGuatemalaGuernseyGuineaGuinea-BissauGuyanaHaitiHondurasHong KongHungaryIcelandIndonesiaIraqIrelandIsraelItalyJamaicaJapanJerseyJordanKazakhstanKenyaKiribatiKuwaitKyrgyzstanLaosLatviaLebanonLesothoLiberiaLibyaLiechtensteinLithuaniaLuxembourgMacauMacedoniaMadagascarMalawiMalaysiaMaldivesMaliMaltaMarshall IslandsMartiniqueMauritaniaMauritiusMayotteMexicoMicronesiaMoldovaMonacoMongoliaMontenegroMontserratMoroccoMozambiqueNamibiaNauruNepalNetherlandsNetherlands AntillesNew CaledoniaNew ZealandNicaraguaNigerNigeriaNiueNorwayOmanPakistanPalauPanamaPapua New GuineaParaguayPeruPhilippinesPolandPortugalPuerto RicoQatarRepublic of CroatiaRepublic of the CongoReunionRomaniaRwandaSaint HelenaSaint Kitts-NevisSaint LuciaSaint Pierre and MiquelonSaint Vincent and the GrenadinesSan MarinoSaudi ArabiaSenegalSerbiaSeychellesSierra LeoneSingaporeSlovakiaSloveniaSolomon IslandsSomaliaSouth AfricaSouth KoreaSpainSri LankaSurinameSwazilandSwedenSwitzerlandTaiwanTajikistanTanzaniaThailandTogoTongaTrinidad and TobagoTunisiaTurkeyTurkmenistanTurks and Caicos IslandsTuvaluUgandaUnited Arab EmiratesUnited KingdomUnited StatesUruguayUzbekistanVanuatuVatican City StateVenezuelaVietnamVirgin Islands (U.S.)Wallis and FutunaWestern SaharaWestern SamoaYemenZambiaZimbabwe

how to fix prestige cooker safety valve made in china

For super-quick, fuss-free meals, you cannot beat the pressure cooker. They cook food in a fraction of the time required with conventional cooking. We"re talking pot roast in less than an hour!

Pressure cookers are zooming back into popularity. But these days, they come with improved safety features, including redundant pressure release valves. So no more eruptions. A sealing ring helps create an air-tight seal that won"t allow steam to escape unless you press the safety valve or regulator. Even so, take care not to overfill the pot on a pressure cooker. You are, after all, dealing with contents under pressure.

There are two types of pressure cookers. Stove-top pressure cookers and electric pressure cookers. Regardless of which type you buy, the pressure cooker should be able to endure at least 15 psi (pounds of pressure per square inch).

With stove-top pressure cookers, you control the heat just like a regular pot on the stove. Look for stainless-steel cookers. Aluminum pressure cookers are less expensive, but also less durable, and the aluminum can react to acidic foods.

Electric pressure cookers come with programmable features for cooking times and settings for different cooking functions (browning, simmering, sautéing, and warming). Top-of-the-line models double as yogurt makers, rice cookers, even slow cookers. One advantage of an electric pressure cooker is that they don"t take up stove space, which makes them handy when you"re cooking a big meal.

A cover-locking safety system that prevents pressure from building up in the pot if the lid is not secured correctly; the safety system also prevents the lid from being lifted if the pot is still under pressure.

Roasts, soups, stews, beans...here"s our complete collection of Pressure Cooker Recipes. And while you"re at it, see the 6 Tips for Perfect Pressure Cooker Cooking.

A pressure cooker combines food with a cooking liquid in a sealed compartment (the pot); as the liquid boils, steam is trapped inside the sealed, airtight pot; pressure builds and the temperature rises. At 15 psi, water boils at 250 degrees F (instead of 212 degrees F). At this higher temperature, under pressure, food cooks fast. In fact, food cooked in a pressure cooker is typically cooked in about one-third the time of conventional cooking.

For most meals, an 8 quart pressure cooker is enough. There are smaller pressure cookers -- a 4 quart is probably fine for singles or couples. If you"re cooking for a crowd, there are 12-quart contraptions and up from there.

Definitely. By definition, pressure cookers overcome the key drawback of cooking at elevation: low atmospheric pressure. At elevation, water boils at a lower temperature, which can make conventional cooking less efficient -- e.g., boiled foods are undercooked. That"s not a problem with a pressure cooker.

Not a good idea. Unlike a slow cooker, which you can walk away from without worry, pressure cookers require something like parental supervision. After all, it"s contents are under pressure. Plus, the food is ready fast.

how to fix prestige cooker safety valve made in china

Your pressure cooker and dinner can be ruined with too much food or too little liquid.  Too much food could block the pressure valve while too little liquid can permanently damage the cooker’s metal, bakelite and silicone fittings.  Here’s everything you need to know to keep your pressure cooker on the level and dinner coming.

Max 1/2 Full for Beans, Rice, Grains, Dehydrated Foods and Fruit – These foods either expand during cooking or generate lots of foam (or both). Beans can swell to twice their size during cooking and some grains, even more.  They also generate lots of foam and bubbles – which climb up the sides of the cooker to spray out of the valves – plugging them up.  This class of ingredients should also be opened using Natural Release method – which avoids the foamy starchy, bubbly, goo from spraying out of the valve during the pressure release, too.

Max 2/3 Full for Everything Else – Foods that don’t generally get any larger during cooking, bubble or foam are in this category and this includes meats, vegetables, soups and stocks.

If your recipe has lots of different ingredients, say a soup with vegetables and some beans, then you can go up to 2/3 full but if you’re cooking only one primary ingredient, say a bean chili, then you should respect that ingredient’s maximum capacity – 1/2 full .

A pressure cooker’s maximum capacity is, in fact, a safety feature. In order for a pressure cooker to receive UL rating, their manual must contain text to this effect.

Pressure cooker maximum capacities apply to all pressure cookers types (electric, jiggler, weight-modified and spring valves), shapes (pressure pans, stock pot- and braiser-type cookers), sizes (from 1 to 12L) and origins (Europe, Asia, America). That’s because all pressure cookers have valves and safety mechanisms placed in the lid.

The maximum capacity recommendations are in place to ensure neither food nor cooking liquid interfere with, or trigger, the safety systems located in the lid. The NUMBER ONE REASON for pressure cooker mishaps usually involves someone not familiar with pressure cooking filling the cooker beyond the cooker’s recommended maximum capacity – ultimately blocking the pressure release valve.

Unfortunately, many pressure cookers do not have markings inside to delineate these maximums.  If your pressure cooker doesn’t, fill up the cooker with water to get a visual feel for the location. For example, my un-marked 6L Fagor Futurois 2/3 full when the water is just under where the handles attach and 1/2 full just above where the round bottom starts to go straight.

Liters and quarts are used interchangeably by pressure cooker manufacturers. So when you purchase a 6 quart pressure cooker if it"s made in the U.S. the cooker is exactly 6 quarts capacity, but if it"s made in Europe or China, even if the size is stated in quarts, the pressure cooker is really 6L (which is actually 6.34 quarts).

Cups are roughly equivalent to 250ml, they rounded down to the nearest cup measurement in the maximum capacity calculations. Whether your pressure cooker is measured in quarts or liters the max-fill calculations in U.S. cups will work.

If your pressure cooker size is not listed above, simply multiply its size by .5 to calculate the cooker’s 1/2 capacity and .66 to calculate 2/3 capacity.

For someone shopping for their first or second pressure cooker – the prime concern is how much food it will hold. Here is a table that describes the maximum capacity of some key representative ingredients. Remember that “Max” refers to both the ingredients and their cooking liquid.

One cup is roughly equivalent to the the dry ingredient reaching 250ml in a measuring pitcher (sorry we cannot give the quantities in grams as beans and rice differ in their weight between varieties).

A larger pressure cooker will need more steam to pressurize and will also need more liquid to boil and generate that steam.  Some pressure valves vent by function or design. While a spring valve releases little or no steam to keep a cooker at pressure, instead, a weight-modified or jiggler-type valvemust release pressure and steam rhythmically to maintain a set pressure. The extra venting means that a longer cooking time will evaporate more liquid, and the cooker will require more to keep it from running dry.

Some pressure cookers have a “min” line etched inside the cooker to make it easy to see if you’ve got enough liquid in them while others (usually the ones requiring more liquid) have a line with a 1/3 mark to indicate the minimum food and liquid requirement.

You can reach your pressure cooker’s minimum liquid requirement with stock, fruit juice,  a little wine or beer –  but not hard liquor (large quantities of alcohol will evaporate through the valve and the vapor will ignite).

Using advanced pressure cooking techniques you can calculate the liquid released by a vegetable or piece or meat in a recipe during pressure cooking – and use those liquids maintain pressure.  Here’s a handy chart that will get you half-way there. This technique has enough caveats to merit its own article – so I won’t explain it here. Any well-written pressure cooker recipe from a trusted source will have already made these calculations to get the most flavor from the pressure cooker.

how to fix prestige cooker safety valve made in china

This website is using a security service to protect itself from online attacks. The action you just performed triggered the security solution. There are several actions that could trigger this block including submitting a certain word or phrase, a SQL command or malformed data.