ingersoll rand air compressor safety valve manufacturer

The 32174286 OEM safety valve from Ingersoll Rand is set to release air pressure in the aftercooler and discharge lines if the pressure were to ever reach 325psi or above. This is a common safety valve that was used on several of Ingersoll Rand"s reciprocating air compressors. The safety valve was typically installed on the air cooled aftercooler itself. On several of the older model Ingersoll Rand piston compressors the 325 psi safety valve was threaded directly onto the check valve.

This valve was used on multiple models besides the units listed above. Please contact our parts department for confirmation this will fit your air compressor.

**Please note the 325psi safety valve is different than the 150 or 200psi safety valve that was commonly used on receiver tanks. If you are looking for a receiver tank safety valve, please confirm the maximum pressure on your receiver tank and contact us for proper sizing and application.

This safety valve sits on the low pressure head on several models of the Ingersoll Rand T30 two stage pump. The safety valve has a maximum pressure rating of 80psi and threads into the pump with ¼” threads.

It is extremely rare that this safety valve goes bad. If the valve is blowing off, it is typically indicative of faulty valves on the inside of the pump. Bad valves will cause the safety valve to blow, as the inlet valve on the high pressure side does not close on the piston upstroke, therefore releasing high pressure air back through the intercooler into the low pressure head.

When the safety valve pops, you will need to replace the reed valves on the inside of your pump. Since this part was used on a number of different IR pumps, the valve/gasket kits for these models will vary. Please contact our parts department with your piston pump model number and we will be happy to find the correct valve and gasket kit for your compressor.

These high pressure safety valves combine extra sturdy construction, a patented* three-piece disc including seat seal of Teflon, and finely adjustable blow down control-resulting in long service life with superior seat tightness at operating pressure

Multi-stage compressor intercoolers and after coolers, Receivers Especially recommended for thermal expansion relief and/or full rated capacity discharge. When equipped with S/S springs, or all stainless steel assemblies, for low temperature-cryogenic- installations.

We Supply Genuine Quality Safety Valves For All Types And Sizes Of Ingersoll Rand Type 30 Air Compressors. We Maintain Huge Stock For These Safety Valves Starting From 2 Hp To 30 Hp Range And 20 To 1000Psi For Various Industrial Applications. These Safety Valves Are Supplied On The Basis Of Oem Reference Part No. &Amp; Model. These Safety Valves Are Made Up Of Very High Quality Material With Full Strength To Match The Rated Performance And Continuous Usage At High Temperature Areas. We Provide Warranty For All These Parts As Per Standard Norms.

Compressor Valve Replacement Valves have to perform with minimum resistance or power will be wasted and components will wear at accelerated rates. All of this is why valve maintenance should be considered a top priority. Time and effort spent on improving valve service life will reduce the costs associated with downtime such as loss production and compressor rental. Longer service life means you will not have to buy replacement parts as often. And if done correctly, you can practically eliminate the need to replace the expensive valve bodies. Meets or Exceeds OEM Specifications eIndustrialSolutions provides quality aftermarket replacement compressor parts that meet or exceed the original OEM specifications. Aftermarket parts are more cost effective than brand name parts and can typically allow for a reduction in your annual maintenance costs over the life of the compressor. eIndustrialSolutions.com is working hard to be the easiest and most reliable online source for you to find all your aftermarket replacement air compressor parts and repair kits. We carry thousands of aftermarket air compressor parts in stock and available online 24/7 for your convenience or by calling toll-free: (866) 650-1937. eIndustrialSolutions is an independent supplier of aftermarket compressor replacement parts and is not affiliated with manufacturers mentioned in this web site. Original equipment manufacturer (OEM) names are the trademarks of each manufacturer. On products marked "equivalent" or "replacement," OEM names and part numbers are for reference only.

Chengdu Pudding Mechatronic Co. CPMCwas established with a vision to provide international buyers competitive prices for world famous air compressors and the related GENUINE ORIGINALspare parts, air tools, woodworking tools & hardware products with professional consultancy and sales service. Based in China and running our own network AirCompressorsTrade.Com,we consistently strive to become one of the most influential DIRECT online supplier rather than those middle handlers on third platform like Alibaba, Made-in-China or Globalsources, Ebay, Amazon or Shopify.

Drilling Equipment Parts (Epiroc, Sandvik), SEW EURODRIVE Products, Compressors (+Air Dryers) of all types & models for Atlas Copco, Sullair, Ingersoll Rand, Doosan, CompAir, GD, etc;

Genuine Original parts for above brands for stationary compressors and portable mobile compressors plus the Atlas Copco Vacuum Pumps Original Parts;Epiroc, Sandvik, SEW, Honeywell, Mann Filters, Siemens, Eaton,Schneider ElectricABB, CAT, Konecrane Parts, Ametek Land, etc;

CPMC China service team strive for offering all kinds of Genuine original spares parts like: Airend, motors (ABB, Caterpillar, Cummins, Kubota, Siemens motors), air filter, oil filter, air and oil separator, bearings (SKF, KOYO, NTN, NSK, FAG, etc), belts(continental, Gates, MBL, etc), lubricating oil, maintenance service kit, intake valve, check valve, oil-cut valve, safety valve, minimum pressure valve (MPV), auto drain valve, pressure regulator valve, solenoid valve, temperature sensor, pressure sensor, cooler, fans assembly, fan motors, gears set, housing bearings, air tools, woodworking tools of blades, etc.

Our compressors, spare parts, and tools customers are from around the globe, and here are just a few of them: Armenia, Azerbaijan, Bahrain, Bangladesh, Brunei, Cambodia, Cyprus, South Korea, Indonesia, Iran, Iraq, Japan, Jordan, Kazakhstan, Kuwait, Kyrgyzstan, Laos, Lebanon, Malaysia, Mongolia, Myanmar, Nepal, Oman, Pakistan, Philippines, Qatar, South Korea, Saudi Arabia, Singapore, Syria, Tajikistan, Thailand, Turkey, Turkmenistan, United Arab Emirates, Uzbekistan, Viet Nam, Australia, New Zealand, Papua New Guiana, and African countries such as Nigeria, Kenya, Zambia, South Africa, etc, South American Countries: Brazil, Colombia, Peru, Chile, Argentina, etc, and the USA, Canada, Spain, France, Italy, Russia, etc few European countries. Learn more about

Chengdu Pudding Mechatronic Co., CPMC is an independent supplier offering Air Compressors and Genuine Original Parts, for international buyers. Our mission is to provide overseas buyers with Epiroc Drilling Equipment Parts, air compressors and related parts, air tools and woodworking tools with discounted offers.However CPMC is not affiliated with most manufacturers mentioned on this website. Genuine Original Parts or the Original Equipment Manufacturer’s trademarks belong to each manufacturer. AirCompressorsTrade.com makes no claims of special affiliation with or special sanctions by the original manufacturers or the respective trademarks.

PFC - Parts for Compressor is a global supplier of OEM Quality New Aftermarket Replacement Air Compressor Spare Parts - Valve, Safety - 60 PSIG 97048094 - Model 15T2/2540 - Type 30 Replacement Kits from India.