kingston safety valve quotation

About Kingston: Since 1908, F.C. Kingston has been manufacturing high quality valves for industry. KINGSTON"s broad product line of Safety Valves, Check Valves, and Flow Control Valves are easily tailored to meet the demands of your application. Kingston"s product line has grown over time to include custom OEM design, pressure safety, check and flow control valves.

The KNG Series Safety Relief Valves are designed for accuracy and reliability. The KNG Series offers relief valves ranging from 1/2" to 3" NPT (D-J) orifice in brass, carbon steel, and stainless steel materials to service various applications.

The Kingston Model 314 Burner Valve is designed for use with LP-gas, where a controllable flame is required for burning weeds, brush or other spot burning or heating applications. Constructed of heavy cast and bar-stock brass, precision machined for smooth operation each valve is equipped with a squeeze type control lever, Buna-N seals, and needle valve for pilot control.

The Kingston Model 314 Burner Valve has a l/4" female inlet and separate l/4" pilot and main burner outlets. Main port located on the top, pilot port on the bottom. Wire lock ring to hold valve in open position, for ease of operation.

The Kingston Model BV Industrial Solenoid Valves are designed for applications requiring the durabilty of brass and stainless steel construction. These high performance normally-closed flow control valves are individually tested to 180 psi and precision manufactured from non-corrosive, 123 ingot red brass. Kingston Model BV Industrial Solenoid Valves have been in production for over 35 years and are built to perform.

Kingston Model 115 ASME Code Soft Seat Safety Valves are constructed of brass with a Viton seal and positive stop for a bubble-tight seal. This valve is equipped with a pull ring for manual testing. Internal construction and performance are the same as Model 114 differing only by the pull ring. The Kingston Model 115 ASME Code Soft Seat Safety Valve, like every Kingston Safety Valve, is set and tested at factory for quality and dependability. The Kingston Model 115 ASME Code Soft Seat Safety Valve is approved in Massachusetts and Washington DC and is stamped with UV & NB symbols. Registered in all Canadian provinces and territories.

Since 1908, Kingston Valves has been designing and building high-quality, reliable industrial valves, including go-tos like check valves, pressure relief valves and brass diverter valves. Kingston Valves manufactures and supplies a variety of soft and hard seat brass and stainless-steel safety valves, check valves, flow control valves, drain valves, and custom OEM designed valves. Rest assured with their Quality System’s ASME certification, as well as other industry-specific certifications.

History and performance have proven Kingston to be a strong industrial valve manufacturer for many applications such as process control, steam fired autoclave sterilizers, hyperbaric therapy chambers, fire suppression, locomotive brake systems, compressed air systems and dryers, and food & beverage equipment.

Kingston Model 114 ASME Code Soft Seat Safety Valves are constructed of brass with a Viton seal and positive stop for a bubble-tight seal. This valve is also equipped with a protective stem cover and manual test lever. Internal construction and performance are the same as Model 115 differing only by the test lever.  The Kingston Model 114 ASME Code Soft Seat Safety Valve, like every Kingston Safety Valve, is set and tested at factory for quality and dependability.  The Kingston Model 114 ASME Code Soft Seat Safety Valve is approved in Massachusetts and Washington DC and is stamped with UV & NB symbols. Registered in all Canadian provinces and territories.

The Kingston Model 112CSS Safety Valve is an ASME Code Certified, precision machined brass valve with a hard seat. This valve supports ASME Code applications up to 300 psi. It also features a stainless steel ball for durability and a pull ring for manual testing. As Kingston’s most popular valve, it is suited for a wide variety of applications.

The Kingston Model 112CSS Safety Valve is approved in Massachusetts and Washington DC and is stamped with UV & NB symbols. Registered in all Canadian provinces and territories.

Parker P33 Series safety exhaust valves are ideal for immediately exhausting the compressed air in the event of fault condition and bring equipment / machinery to a safe state. These valves are made of cast aluminium for durability and are integrated with an adjustable soft start to provide a gradual flow of pressure into the machinery on start up. They further feature LED screens for clear status & visual reference of main solenoid operation, sensor power and fault condition in the system. Choose from a broad range of these safety exhaust valves, available in NPTF and BSPP type port connections.

KINGSTON Safety Relief Valve, Model: KNG743, Captured Exhaust Style, 3 in Nominal, FNPT Connection, 15 psi Pressure Rating, 746 scfm Flow Rate, Air, Gas Media, Lift Lever Actuator, 1.418 sq-in Orifice, 3-1/4 in Inlet to Outlet Length, A479-316 Stainless Steel Body, Stainless Steel Seat, Stainless Steel Seal, SA479-316 Stainless Steel Disc, Trim Material: SA479-316 Stainless Steel Lock Nut/302/17-7 Spring, Plated C1018 Handle, PTFE Washer Softgoods, -320 to 425 deg F, 14-1/2 in H Dimensions